- 19 Aug, 2024 6 commits
-
-
Steffen Trumtrar authored
The G070ACE-LH3 is a 7" TFT Color LCD module with WLED backlight. https://www.data-modul.com/sites/default/files/products/G070ACE-LH3-specification-12058417.pdfSigned-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240729-b4-v6-10-topic-innolux-v2-2-27d32c766ce5@pengutronix.deSigned-off-by:
-
Steffen Trumtrar authored
Add Innolux G070ACE-LH3 7" WVGA (800x480) TFT LCD panel compatible string. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240729-b4-v6-10-topic-innolux-v2-1-27d32c766ce5@pengutronix.deSigned-off-by:
-
Esben Haabendal authored
Using the correct bit helps. The documentation specifies bit 0 in both registers to be controlling polarity of dpi_vsync_input and dpi_hsync_input polarity. Bit 1 is reserved, and should therefore not be set. Tested with panel that requires active high vsync and hsync. Signed-off-by:
Esben Haabendal <esben@geanix.com> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Rob Herring (Arm) authored
There's no need to get the length of an DT array property before parsing the array. of_property_read_variable_u8_array() takes a minimum and maximum length and returns the actual length (or error code). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
-
Cristian Ciocaltea authored
Make use of devm_clk_get_enabled() to replace devm_clk_get() and clk_prepare_enable() for isfr and iahb clocks, and drop the now unnecessary calls to clk_disable_unprepare(). Similarly, use devm_clk_get_optional_enabled() helper for cec clock, which additionally allows to remove the -ENOENT test. Moreover, the clock related members of struct dw_hdmi are not required anymore, hence drop them. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by:
-
Liu Ying authored
If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set, this driver won't initialize a connector and hence display mode won't be validated in drm_connector_helper_funcs::mode_valid(). So, move the mode validation from drm_connector_helper_funcs::mode_valid() to drm_bridge_funcs::mode_valid(), because the mode validation is always done for the bridge. Fixes: 30e2ae94 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
- 16 Aug, 2024 11 commits
-
-
Jeffrey Hugo authored
Pranjal's email address is bouncing. Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Carl Vanderlip <quic_carlv@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240726155310.765164-1-quic_jhugo@quicinc.com
-
Jani Nikula authored
Use the mem_is_zero() helper where possible. Conversion done using cocci: | @@ | expression PTR; | expression SIZE; | @@ | | <... | ( | - memchr_inv(PTR, 0, SIZE) == NULL | + mem_is_zero(PTR, SIZE) | | | - !memchr_inv(PTR, 0, SIZE) | + mem_is_zero(PTR, SIZE) | | | - memchr_inv(PTR, 0, SIZE) | + !mem_is_zero(PTR, SIZE) | ) | ...> Reviewed-by:
Kees Cook <kees@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240814100035.3100852-2-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
Almost two thirds of the memchr_inv() usages check if the memory area is all zeros, with no interest in where in the buffer the first non-zero byte is located. Checking for !memchr_inv(s, 0, n) is also not very intuitive or discoverable. Add an explicit mem_is_zero() helper for this use case. Reviewed-by:
Andy Shevchenko <andy@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240814100035.3100852-1-jani.nikula@intel.comSigned-off-by:
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: Jyri Sarha <jyri.sarha@iki.fi> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
-
Thomas Zimmermann authored
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by:
-
- 15 Aug, 2024 14 commits
-
-
Jonas Karlman authored
Add max_tmds_clock validation to prepare for additions and changes to the MPLL config table. Use the same rate restrictions that is currently applied. The rate limit for RK3288, RK3399 and RK3568 is based on current mpll table. The rate limit for RK3228 and RK3328 is based on the inno-hdmi-phy pre-pll table. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-7-jonas@kwiboo.se
-
Jonas Karlman authored
Call dw_hdmi_set_high_tmds_clock_ratio in phy init ops to allow support of High TMDS Bit Rates used by HDMI2.0 display modes. Signed-off-by:
-
Jonas Karlman authored
EDID cannot be read on RK3328 until after read_hpd has been called and correct io voltage has been configured based on connection status. When a forced mode is used, e.g. video=1920x1080@60e, the connector detect ops, that in turn normally calls the read_hpd, never gets called. This result in reading EDID to fail in connector get_modes ops. Call dw_hdmi_rk3328_read_hpd at end of dw_hdmi_rk3328_setup_hpd to correct io voltage and allow reading EDID after setup_hpd. Fixes: 1c53ba8f ("drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328") Signed-off-by:
-
Alex Bee authored
There is no reason to limit VOP scaling to 3840px width, the limit of RK3288, when there are newer VOP versions that support 4096px width. Change to enforce a maximum of 4096px width plane scaling, the maximum supported output width of the VOP versions supported by this driver. Fixes: 4c156c21 ("drm/rockchip: vop: support plane scale") Signed-off-by:
Alex Bee <knaerzche@gmail.com> Signed-off-by:
-
Louis Chauvet authored
Some newlines were missing around comments. Signed-off-by:
Louis Chauvet <louis.chauvet@bootlin.com> Signed-off-by:
Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240814-google-clarifications-v1-1-3ee76d7d0c28@bootlin.com
-
Cristian Ciocaltea authored
The mpll_cfg, cur_ctr and phy_config members in struct dw_hdmi_plat_data are only used to configure the Synopsys PHYs supported internally by DW HDMI transmitter driver (gpu/drm/bridge/synopsys/dw-hdmi.c), via hdmi_phy_configure_dwc_hdmi_3d_tx(), which is further invoked from dw_hdmi_phy_init(). This is part of the internal dw_hdmi_synopsys_phy_ops struct, managed within dw_hdmi_detect_phy(). To handle vendor PHYs, DW HDMI driver doesn't make use of the internal PHY ops and, instead, relies on the glue layer to provide the phy_ops and phy_name members of struct dw_hdmi_plat_data. Drop the unnecessary assignments of DW internal PHY related members from structs rk3228_hdmi_drv_data and rk3328_hdmi_drv_data, since both set the phy_force_vendor flag and correctly provide the expected vendor PHY data. Signed-off-by:
-
Cristian Ciocaltea authored
The regulators are only enabled at bind() and disabled at unbind(), hence replace the boilerplate code by making use of devm_regulator_get_enable() helper. Signed-off-by:
-
Cristian Ciocaltea authored
Make use of devm_clk_get_optional_enabled() to replace devm_clk_get() and clk_prepare_enable() for ref_clk and drop the now unnecessary calls to clk_disable_unprepare(). Additionally, use devm_clk_get_optional() helper for grf_clk to replace the open coding call to devm_clk_get() followed by the -ENOENT test. Signed-off-by:
-
Cristian Ciocaltea authored
Prefer drm_{err|info|dbg}() over deprecated DRM_DEV_{ERROR|INFO|DEBUG}() logging macros. Conversion done with the help of the following semantic patch, followed by a few minor indentation adjustments: @@ identifier T; @@ ( -DRM_DEV_ERROR(T->dev, +drm_err(T, ...) | -DRM_DEV_INFO(T->dev, +drm_info(T, ...) | -DRM_DEV_DEBUG(T->dev, +drm_dbg(T, ...) ) Signed-off-by: -
Val Packett authored
The RK3066 does have RGB display output, so it should be marked as such. Fixes: f4a6de85 ("drm: rockchip: vop: add rk3066 vop definitions") Cc: stable@vger.kernel.org Signed-off-by:
Val Packett <val@packett.cool> Signed-off-by:
-
Val Packett authored
The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame and needs the driver to acknowledge that by clearing the bit. Unless we clear it "between" frames, the RGB output only shows noise instead of the picture. atomic_flush is the place for it that least affects other code (doing it on vblank would require converting all other usages of the reg_lock to spin_(un)lock_irq, which would affect performance for everyone). This seems to be a redundant synchronization mechanism that was removed in later iterations of the VOP hardware block. Fixes: f4a6de85 ("drm: rockchip: vop: add rk3066 vop definitions") Cc: stable@vger.kernel.org Signed-off-by:
-
Cristian Ciocaltea authored
Driver makes use of the BIT() macro, but relies on the bits header being implicitly included. Explicitly pull the header in to avoid potential build failures in some configurations. While at it, reorder include directives alphabetically. Signed-off-by:
-
Christophe JAILLET authored
'struct drm_encoder_helper_funcs' is not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 7458 552 0 8010 1f4a drivers/gpu/drm/rockchip/analogix_dp-rockchip.o After: ===== text data bss dec hex filename 7578 424 0 8002 1f42 drivers/gpu/drm/rockchip/analogix_dp-rockchip.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Dragan Simic authored
Clean up a few logged messages, which were previously worded as rather incomplete sentences separated by periods. This was both a bit unreadable and grammatically incorrect, so convert them into partial sentences separated (or connected) by semicolons, together with some wording improvements. Signed-off-by:
Dragan Simic <dsimic@manjaro.org> Reviewed-by:
Andy Yan <andyshrk@163.com> Signed-off-by:
-
- 14 Aug, 2024 4 commits
-
-
Jani Nikula authored
drm_edid_block_valid() is no longer used outside of drm_edid.c. Make it static. Acked-by:
Zhi Wang <zhiwang@kernel.rog> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240812142849.1588006-2-jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
We'll want to stop drm_edid_block_valid() usage. KVMGT is the last user. Replace with drm_edid_valid(), which unfortunately requires an allocated drm_edid. However, on the plus side, this would be required to handle the TODO comment about EDID extension block support. Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812142849.1588006-1-jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
The dimensions are available in display info, so there's no need for raw EDID access. While at it, move the debug logging to where the EDID is actually read. Reviewed-by:
-
Jani Nikula authored
Debug printing at DisplayID validation leads to lots of log spamming as it's called at DisplayID iterators during EDID parsing. Remove it, and replace with a less noisy message at connector EDID update. Acked-by:
-
- 13 Aug, 2024 5 commits
-
-
Vignesh Raman authored
Uprev mesa to adapt to the latest changes in mesa ci. Project 'anholt/deqp-runner' was moved to 'mesa/deqp-runner'. So update the link. Signed-off-by:
Vignesh Raman <vignesh.raman@collabora.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240807082020.429434-1-vignesh.raman@collabora.com
-
WangYuli authored
GitHub Dependabot has issued the following alert: "Upgrade setuptools to version 70.0.0 or later. A vulnerability in the package_index module of pypa/setuptools versions up to 69.1.1 allows for remote code execution via its download functions. These functions, which are used to download packages from URLs provided by users or retrieved from package index servers, are susceptible to code injection. If these functions are exposed to user-controlled inputs, such as package URLs, they can execute arbitrary commands on the system. The issue is fixed in version 70.0. Severity: 8.8 / 10 (High) Attack vector: Network Attack complexity: Low Privileges required: None User interaction: Required Scope: Unchanged Confidentiality: High Integrity: High Availability: High CVE ID: CVE-2024-6345" To avoid disturbing everyone with the kernel repo hosted on GitHub, I suggest we upgrade our python dependencies once again to appease GitHub Dependabot. Link: https://github.com/dependabotSigned-off-by:
WangYuli <wangyuli@uniontech.com> Acked-by:
-
Tejas Vipin authored
Use multi style wrapped functions for mipi_dsi in the startek-kd070fhfid015 panel. Signed-off-by:
Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Tejas Vipin authored
Add more functions that can benefit from being multi style and mark older variants as deprecated to eventually convert all mipi_dsi functions to multi style. Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Dan Carpenter authored
This code has an issue because it loops until "i" is set to UINT_MAX but the test for failure assumes that "i" is set to zero. The result is that it will only print an error message if we succeed on the very last try. Reformat the loop to count forwards instead of backwards. Fixes: 22814751 ("drm/ast: astdp: Perform link training during atomic_enable") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
