Merge tag 'soc-fsl-next-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.11

- Add RCPM errata workaround for A-008646 on LS1021A
- Various W=1 warning fixes for fsl/soc drivers

* tag 'soc-fsl-next-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: handle RCPM errata A-008646 on SoC LS1021A
  soc: fsl: qbman: qman: Remove unused variable 'dequeue_wq'
  soc: fsl: qe: qe_common: Fix misnamed function attribute 'addr'
  soc: fsl: dpio: qbman-portal: Fix a bunch of kernel-doc misdemeanours

Link: https://lore.kernel.org/r/20201125165913.15441-1-leoyang.li@nxp.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

dma_direct_set_offset has been moved from dma-mapping.h to
dma-map-ops.h, but our driver hasn't been updated resulting in a build
breakage. Let's change the header to fix the build.

Fixes: 16fee29b ("dma-mapping: remove the dma_direct_set_offset export")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201124103546.839711-1-maxime@cerno.tech'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Hardware issue:
- Reading register RCPM_IPPDEXPCR1 always return zero, this causes
  system firmware could not get correct information and wrongly do
  clock gating for all wakeup source IP during system suspend. Then
  those IPs will never get chance to wake system.

Workaround:
- Copy register RCPM_IPPDEXPCR1's setting to register SCFG_SPARECR8
  to allow system firmware's psci method read it and do things accordingly.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Fixes the following W=1 kernel build warning(s):

 drivers/soc/fsl/qbman/qman.c: In function ‘qman_shutdown_fq’:
 drivers/soc/fsl/qbman/qman.c:2700:8: warning: variable ‘dequeue_wq’ set but not used [-Wunused-but-set-variable]

Cc: Li Yang <leoyang.li@nxp.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Fixes the following W=1 kernel build warning(s):

 drivers/soc/fsl/qe/qe_common.c:237: warning: Function parameter or member 'addr' not described in 'cpm_muram_dma'
 drivers/soc/fsl/qe/qe_common.c:237: warning: Excess function parameter 'offset' description in 'cpm_muram_dma'

Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: act <dmalek@jlc.net>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: "Software, Inc" <source@mvista.com>
Cc: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Fixes the following W=1 kernel build warning(s):

 drivers/soc/fsl/dpio/qbman-portal.c:430: warning: Function parameter or member 'inhibit' not described in 'qbman_swp_interrupt_set_inhibit'
 drivers/soc/fsl/dpio/qbman-portal.c:430: warning: Excess function parameter 'mask' description in 'qbman_swp_interrupt_set_inhibit'
 drivers/soc/fsl/dpio/qbman-portal.c:518: warning: Function parameter or member 'd' not described in 'qbman_eq_desc_clear'
 drivers/soc/fsl/dpio/qbman-portal.c:529: warning: Function parameter or member 'respond_success' not described in 'qbman_eq_desc_set_no_orp'
 drivers/soc/fsl/dpio/qbman-portal.c:529: warning: Excess function parameter 'response_success' description in 'qbman_eq_desc_set_no_orp'
 drivers/soc/fsl/dpio/qbman-portal.c:941: warning: Function parameter or member 's' not described in 'qbman_swp_push_get'
 drivers/soc/fsl/dpio/qbman-portal.c:941: warning: Excess function parameter 'p' description in 'qbman_swp_push_get'
 drivers/soc/fsl/dpio/qbman-portal.c:955: warning: Function parameter or member 's' not described in 'qbman_swp_push_set'
 drivers/soc/fsl/dpio/qbman-portal.c:955: warning: Excess function parameter 'p' description in 'qbman_swp_push_set'
 drivers/soc/fsl/dpio/qbman-portal.c:1052: warning: Function parameter or member 'd' not described in 'qbman_pull_desc_set_fq'
 drivers/soc/fsl/dpio/qbman-portal.c:1065: warning: Function parameter or member 'd' not described in 'qbman_pull_desc_set_wq'
 drivers/soc/fsl/dpio/qbman-portal.c:1079: warning: Function parameter or member 'd' not described in 'qbman_pull_desc_set_channel'
 drivers/soc/fsl/dpio/qbman-portal.c:1403: warning: Function parameter or member 'd' not described in 'qbman_release_desc_clear'
 drivers/soc/fsl/dpio/qbman-portal.c:1412: warning: Function parameter or member 'd' not described in 'qbman_release_desc_set_bpid'
 drivers/soc/fsl/dpio/qbman-portal.c:1412: warning: Function parameter or member 'bpid' not described in 'qbman_release_desc_set_bpid'
 drivers/soc/fsl/dpio/qbman-portal.c:1421: warning: Function parameter or member 'd' not described in 'qbman_release_desc_set_rcdi'
 drivers/soc/fsl/dpio/qbman-portal.c:1421: warning: Function parameter or member 'enable' not described in 'qbman_release_desc_set_rcdi'

Cc: Roy Pledge <Roy.Pledge@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Merge tag 'samsung-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers

Samsung SoC drivers changes for v5.11

1. Limit the big.LITTLE cpuidle driver to Peach-Pit/Pi Chromebooks only
   because these are the only platforms were the driver works properly.
2. Convert the Exynos CLKOUT driver to a full module which solves
   boot-probe ordering issues (e.g. if device nodes in DTS are moved).
   This also brings modularization and compile testing.
3. Few minor cleanups in documentation and code.

* tag 'samsung-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  clk: samsung: allow building the clkout driver as module
  soc: samsung: s3c-pm-check: Fix incorrectly named variable 'val'
  soc: samsung: exynos5422-asv: remove unneeded semicolon
  serial: s3c: Update path of Samsung S3C machine file
  Documentation: Update paths of Samsung S3C machine files
  clk: samsung: exynos-clkout: convert to module driver
  soc: samsung: exynos-pmu: instantiate clkout driver as MFD
  cpuidle: big.LITTLE: enable driver only on Peach-Pit/Pi Chromebooks

Link: https://lore.kernel.org/r/20201113162211.10020-1-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-rework-mbus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mripard/linux into arm/drivers

Allwinner MBUS and DMA-ops rework

The Allwinner SoCs have a number of high-bandwidth devices connected to
a memory bus with a different RAM mapping than the CPU.

This was addressed before through drivers setting the DMA offsets
directly, and subsequently changed to calls to dma_direct_set_offset.
However that wasn't really meant to be exported to modules (and thus
drivers). The duplicated code also led to small inconsistencies across
drivers in how we dealt with DT backward compatibility.

Move all that DMA setup code into a platform bus notifier to share that
code and remove the export on dma_direct_set_offset.

* tag 'sunxi-rework-mbus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  dma-mapping: remove the dma_direct_set_offset export
  media: sun8i-di: Remove the call to of_dma_configure
  media: cedrus: Remove the MBUS quirks
  media: sun6i: Remove the MBUS quirks
  media: sun4i: Remove the MBUS quirks
  drm/sun4i: backend: Remove the MBUS quirks
  soc: sunxi: Deal with the MBUS DMA offsets in a central place
  drm/sun4i: backend: Fix probe failure with multiple backends
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-drivers-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers

Renesas driver updates for v5.11

  - Fix a mapping leak in the failure path of the R-Mobile System
    Controller driver.

* tag 'renesas-drivers-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: rmobile-sysc: Fix some leaks in rmobile_init_pm_domains()

Link: https://lore.kernel.org/r/20201113150854.3923885-4-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Drop the dma_direct_set_offset export and move the declaration to
dma-map-ops.h now that the Allwinner drivers have stopped calling it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

of_dma_configure is called by the core before probe gets called so this
is redundant.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Now that the MBUS quirks are applied by our global notifier, we can
remove them from Cedrus. Since the only quirk was whether or not we had
to apply that DMA quirk, we can also remove the quirks infrastructure.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Now that the MBUS quirks are applied by our global notifier, we can
remove them from our CSI driver for the A31.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Now that the MBUS quirks are applied by our global notifier, we can
remove them from our CSI driver for the A10.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Now that the MBUS quirks are applied by our global notifier, we can
remove them from our DRM driver.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So far most of the drivers with the MBUS quirks had to duplicate the
code to deal with DT compatibility and enforcing the DMA offsets.

Let's move for a more maintainable solution by putting everything in a
notifier that would take care of setting up the DMA offsets for all the
MBUS devices.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Commit e0d07278 ("dma-mapping: introduce DMA range map, supplanting
dma_pfn_offset") introduced a regression in our code since the second
backed to probe will now get -EINVAL back from dma_direct_set_offset and
will prevent the entire DRM device from probing.

Ignore -EINVAL as a temporary measure to get it back working, before
removing that call entirely.

Fixes: e0d07278 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The Exynos clock output driver can be built as module (it does not have
to be part of core init process) for better customization.  Adding a
KConfig entry allows also compile testing for build coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20201110193749.261367-1-krzk@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/soc/samsung/s3c-pm-check.c:162: warning: Function parameter or member 'val' not described in 's3c_pm_runcheck'
 drivers/soc/samsung/s3c-pm-check.c:162: warning: Excess function parameter 'vak' description in 's3c_pm_runcheck'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ben Dooks <ben@simtec.co.uk>
Link: https://lore.kernel.org/r/20201103152838.1290217-15-lee.jones@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201101152844.2290728-1-trix@redhat.comSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Correct the path to Samsung S3C24xx machine file, mentioned in
documentation.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200911143343.498-2-krzk@kernel.org

Documentation references Samsung S3C24xx and S3C64xx machine files in
multiple places but the files were traveling around the kernel multiple
times.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200911143343.498-1-krzk@kernel.org

The Exynos clkout driver depends on board input clock (typically XXTI or
XUSBXTI), however on Exynos4 boards these clocks were modeled as part of
SoC clocks (Exynos4 clocks driver).  Obviously this is not proper, but
correcting it would break DT backward compatibility.

Both drivers - clkout and Exynos4 clocks - register the clock providers
with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the
Makefile clkout is behind Exynos4 clock).  It will work only if the
Exynos4 clock driver comes up before clkout.

A change in DTS adding input clock reference to Exynos4 clocks input
PLL, see reverted commit eaf2d2f6 ("ARM: dts: exynos: add input
clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout
appeared before Exynos4 clock provider.  Since clkout depends on Exynos4
clocks and does not support deferred probe, this did not work and caused
later failure of usb3503 USB hub probe which needs clkout:

    [    5.007442] usb3503 0-0008: unable to request refclk (-517)

The Exynos clkout driver is not a critical/core clock so there is
actually no problem in instantiating it later, as a regular module.
This removes specific probe ordering and adds support for probe
deferral.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org

The Exynos clock output (clkout) driver uses same register address space
(Power Management Unit address space) as Exynos PMU driver and same set
of compatibles.  It was modeled as clock provider instantiated with
CLK_OF_DECLARE_DRIVER().

This however brings ordering problems and lack of probe deferral,
therefore clkout driver should be converted to a regular module and
instantiated as a child of PMU driver to be able to use existing
compatibles and address space.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201001165646.32279-2-krzk@kernel.org

Merge tag 'optee-use-uuid-api-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers

Use UUID API to export the UUID

Uses export_uuid() to export and uuid_t to an u8 array instead of depending
on the internals of uuid_t.

* tag 'optee-use-uuid-api-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
  tee: optee: Use UUID API for exporting the UUID

Link: https://lore.kernel.org/r/20201013063612.GA3325842@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This driver always worked properly only on the Exynos 5420/5800 based
Chromebooks (Peach-Pit/Pi), so change the required compatible string to
the 'google,peach', to avoid enabling it on the other Exynos 542x/5800
boards, which hangs in such case. The main difference between Peach-Pit/Pi
and other Exynos 542x/5800 boards is the firmware - Peach platform doesn't
use secure firmware at all.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

This code needs to call iounmap() on one error path.

Fixes: 2173fc7c ("ARM: shmobile: R-Mobile: Add DT support for PM domains")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200923113142.GC1473821@mwandaSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace".  So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 453431a5 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.

Since then a few more instances of kzfree() have slipped in.

Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.

If GIT_DIR is unset, keep using the current ".git" default.

Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Thomas Gleixner:
 "A time namespace fix and a matching selftest. The futex absolute
  timeouts which are based on CLOCK_MONOTONIC require time namespace
  corrected. This was missed in the original time namesapce support"

* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/timens: Add a test for futex()
  futex: Adjust absolute futex timeouts with per time namespace offset

Pull scheduler fixes from Thomas Gleixner:
 "Two scheduler fixes:

   - A trivial build fix for sched_feat() to compile correctly with
     CONFIG_JUMP_LABEL=n

   - Replace a zero lenght array with a flexible array"

* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/features: Fix !CONFIG_JUMP_LABEL case
  sched: Replace zero-length array with flexible-array

Pull perf fix from Thomas Gleixner:
 "A single fix to compute the field offset of the SNOOPX bit in the data
  source bitmask of perf events correctly"

* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: correct SNOOPX field offset

Pull locking fix from Thomas Gleixner:
 "Just a trivial fix for kernel-doc warnings"

* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/seqlocks: Fix kernel-doc warnings

Pull NTB fixes from Jon Mason.

* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
  NTB: Use struct_size() helper in devm_kzalloc()
  ntb: intel: Fix memleak in intel_ntb_pci_probe
  NTB: hw: amd: fix an issue about leak system resources

Pull i2c fix from Wolfram Sang:
 "Regression fix for rc1 and stable kernels as well"

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

Pull more cifs updates from Steve French:
 "Add support for stat of various special file types (WSL reparse points
  for char, block, fifo)"

* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  smb3: add some missing definitions from MS-FSCC
  smb3: remove two unused variables
  smb3: add support for stat of WSL reparse points for special file types

Pull more parisc updates from Helge Deller:

 - During this merge window O_NONBLOCK was changed to become 000200000,
   but we missed that the syscalls timerfd_create(), signalfd4(),
   eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
   bit-wise check of the flags parameter.

   To provide backward compatibility with existing userspace we
   introduce parisc specific wrappers for those syscalls which filter
   out the old O_NONBLOCK value and replaces it with the new one.

 - Prevent HIL bus driver to get stuck when keyboard or mouse isn't
   attached

 - Improve error return codes when setting rtc time

 - Minor documentation fix in pata_ns87415.c

* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  ata: pata_ns87415.c: Document support on parisc with superio chip
  parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
  hil/parisc: Disable HIL driver when it gets stuck
  parisc: Improve error return codes when setting rtc time