- 30 Jan, 2008 40 commits
-
-
Ingo Molnar authored
further cpa largepage-split cleanups: make the splitup isolated functionality, without leaking details back into __change_page_attr(). Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Ingo Molnar authored
simplify 32-bit cpa largepage splitting: do a pure split and repeat the pte lookup to get the new pte modified. Signed-off-by:
-
Ingo Molnar authored
simplify the 32-bit cpa code. Signed-off-by:
-
Huang, Ying authored
This patch fixes some bugs of making EFI runtime code executable. - Use change_page_attr in i386 too. Because the runtime code may be mapped not through ioremap. - If there is no _PAGE_NX in __supported_pte_mask, the change_page_attr is not called. - Make efi_ioremap map pages as PAGE_KERNEL_EXEC_NOCACHE, because EFI runtime code may be mapped through efi_ioremap. Signed-off-by:
Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Ingo Molnar authored
fix more __flush_tlb() instances, out of caution. Signed-off-by:
-
Andi Kleen authored
Fix early_ioremap() on x86-64 I had ACPI failures on several machines since a few days. Symptom was NUMA nodes not getting detected or worse cores not getting detected. They all came from ACPI not being able to read various of its tables. I finally bisected it down to Jeremy's "put _PAGE_GLOBAL into PAGE_KERNEL" change. With that the fix was fairly obvious. The problem was that early_ioremap() didn't use a "_all" flush that would affect the global PTEs too. So with global bits getting used everywhere now an early_ioremap would not actually flush a mapping if something else was mapped previously on that slot (which can happen with early_iounmap inbetween) This patch changes all flushes in init_64.c to be __flush_tlb_all() and fixes the problem here. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
The SMP trampoline always runs in real mode, so making it executable in the page tables doesn't make much sense because it executes before page tables are set up. That was the only user of set_kernel_exec(). Remove set_kernel_exec(). Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Andi Kleen authored
Introduce canon_pgprot() Signed-off-by:
-
Andi Kleen authored
Use the page table level instead of the PSE bit to check if the PTE is for a 4K page or not. This makes the code more robust when the PAT bit is changed because the PAT bit on 4K pages is in the same position as the PSE bit. Signed-off-by:
-
Andi Kleen authored
Intel recommends to first flush the TLBs and then the caches on caching attribute changes. c_p_a() previously did it the other way round. Reorder that. The procedure is still not fully compliant to the Intel documentation because Intel recommends a all CPU synchronization step between the TLB flushes and the cache flushes. However on all new Intel CPUs this is now meaningless anyways because they support Self-Snoop and can skip the cache flush step anyway. [ mingo@elte.hu: decoupled from clflush and ported it to x86.git ] Signed-off-by:
-
Andi Kleen authored
fix: > hm, i just found a failing 64-bit .config while testing your CPA > patchset: > > [ 1.916541] CPA mapping 4k 0 large 2048 gb 0 x 0[0-0] miss 0 > [ 1.919874] Unable to handle kernel paging request at 000000000335aea8 RIP: > [ 1.919874] [<ffffffff8021d2d3>] change_page_attr+0x3/0x61 > [ 1.919874] PGD 0 > [ 1.919874] Oops: 0000 [1] > [ 1.919874] CPU 0 This handles addresses which don't have a mem_map entry. Signed-off-by:
-
Andi Kleen authored
The pte_* modifier functions that cleared bits dropped the NX bit on 32bit PAE because they only worked in int, but NX is in bit 63. Fix that by adding appropiate casts so that the arithmetic happens as long long on PAE kernels. I decided to just use 64bit arithmetic instead of open coding like pte_modify() because gcc should generate good enough code for that now. Signed-off-by:
-
Andi Kleen authored
64bit already had it. Needed for later patches. Signed-off-by:
-
Andi Kleen authored
No need to make it 64bit there. Signed-off-by:
-
Andi Kleen authored
virt_to_page does not care about the bits below the page granuality. So don't mask them. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Ingo Molnar authored
enhance the debug warning in early_ioremap_init(). Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Ingo Molnar authored
fix a long-standing weakness of the early-ioremap allocator: it uses a single pgd entry for the boot mappings, and was not properly protecting itself against crossing a 2MB (4MB) boundary. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Huang, Ying authored
This patch makes "early_ioremap_debug" a early parameter, because "early_ioreamp/early_iounmap" is only used during early boot stage. Signed-off-by:
-
Ingo Molnar authored
add early_ioremap() debug printouts via the early_ioremap_debug boot option. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Ingo Molnar authored
increase max early_ioremap() remapping size from 64K to 256K. Signed-off-by:
-
Ingo Molnar authored
- allow nesting of up to 4 levels Signed-off-by:
-
Huang, Ying authored
This patch fixes a bug of early_ioremap_reset. Signed-off-by:
-
Huang, Ying authored
This patch renames bt_ioremap to early_ioremap, which is used in x86_64. This makes it easier to merge i386 and x86_64 usage. [ mingo@elte.hu: fix ] Signed-off-by:
-
Huang, Ying authored
This patch replaces boot_ioremap invokation with bt_ioremap and removes the boot_ioremap implementation. Signed-off-by:
-
Huang, Ying authored
This patch makes it possible for bt_ioremap() to be used before paging_init(), via providing an early implementation of set_fixmap() that can be used before paging_init(). This way boot_ioremap() can be replaced by bt_ioremap(). Signed-off-by:
-
Siddha, Suresh B authored
Also use _PAGE_PWT for all the mappings which need uncache mapping. Instead of existing PAT2 which is UC- (and can be overwritten by MTRRs), we now use PAT3 which is strong uncacheable. This makes it consistent with pgprot_noncached() Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Joerg Roedel authored
This patch replaces the manual permission setup for pages in ioremap_64.c with the pre-defined __PAGE_KERNEL_EXEC value. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Thomas Gleixner authored
Coding style cleanup before modifying the file. Signed-off-by:
-
Ingo Molnar authored
fix 15 checkpatch warnings. Signed-off-by:
-
Andi Kleen authored
Since change_page_attr() is tricky code it is good to have some regression test code. This patch maps and unmaps some random pages in the direct mapping at boot and then dumps the state and does some simple sanity checks. Add it with a CONFIG option. Signed-off-by:
-
Ingo Molnar authored
based on this patch from Andi Kleen: | Subject: CPA: Return the page table level in lookup_address() | From: Andi Kleen <ak@suse.de> | | Needed for the next change. | | And change all the callers. and ported it to x86.git. Signed-off-by:
-
Andi Kleen authored
Needed for some test code. Signed-off-by:
-
Andi Kleen authored
- Rename it to pte_exec() from pte_exec_kernel(). There is nothing kernel specific in there. - Move it into the common file because _PAGE_NX is 0 on !PAE and then pte_exec() will be always evaluate to true. Signed-off-by:
-
Harvey Harrison authored
Similar to x86 64-bit. Signed-off-by:
-
Andi Kleen authored
When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again. This gives some simple testing for change_page_attr(). Signed-off-by:
-
Ingo Molnar authored
clean up arch/x86/mm/pageattr_64.c. no code changed: text data bss dec hex filename 1751 16 0 1767 6e7 pageattr_64.o.before 1751 16 0 1767 6e7 pageattr_64.o.after Signed-off-by:
-
