- 22 Jul, 2020 3 commits
-
-
Daniel Baluta authored
This must match DAI name from topology. Also, esai-port is too generic as they are 2 ESAIs on i.MX8/i.MX8X boards. SOF integration only uses ESAI0 for now. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200720072046.8152-4-daniel.baluta@oss.nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Daniel Baluta authored
With this change we no longer need to update num_drv when adding new DAI driver. Signed-off-by:
-
Daniel Baluta authored
In the past, the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP were defined in the SOF PCM core, but that was changed since commit 27e322fa ("ASoC: SOF: define INFO_ flags in dsp_ops") Now these flags must be set in DSP ops. Signed-off-by:
-
- 21 Jul, 2020 5 commits
-
-
Mark Brown authored
Merge series "Add ASoC AHUB components for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>: Overview ======== Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio pre-processing and post-processing. It also includes a programmable full crossbar for routing audio data across these accelerators. This series exposes some of these below mentioned HW devices as ASoC components for Tegra platforms from Tegra210 onwards. * ADMAIF : The interface between ADMA and AHUB * XBAR : Crossbar for routing audio samples across various modules * I2S : Inter-IC Sound Controller * DMIC : Digital Microphone * DSPK : Digital Speaker Following is the summary of current series. * Add YAML DT binding documentation for above mentioned modules. * Helper function for ACIF programming is exposed for Tegra210 and later. * Add ASoC driver components for each of the above modules. * Build ACONNECT and ADMA drivers which are essential to realize audio use case. * Add DT entries for above components for Tegra210, Tegra186 and Tegra194. As per the suggestion in [0] audio graph based sound card support is pushed in a separate series. [0] https://lkml.org/lkml/2020/6/27/4 Changelog ========= v4 -> v5 -------- * Common changes - simple-card driver changes are dropped. Changes are migrated to audio graph card and are moved to a separate series as suggested. - '#sound-dai-cells' property is not needed for planned audio graph card Hence dropped from documentation and related DT binding of component drivers. - CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to represent DAI links using audio graph card. Similary DAIs are added in AHUB driver to describe endpoints in audio crossbar. Routing is updated to reflect the same in drivers. v3 -> v4 -------- * [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210" - Removed multiple examples and retained one example per doc - Fixed as per inputs on the previous series - Tested bindings with 'make dt_binding_check/dtbs_check' * [2/23] "ASoC: tegra: Add support for CIF programming" - No change * Common changes (for patch [3/10] to [7/10]) - Mixer control overrides, for PCM parameters (rate, channel, bits), in each driver are dropped. - Updated routing as per DPCM usage - Minor changes related to formatting * New changes (patch [8/23] to [18/23] and patch [23/23]) - Based on discussions in following threads DPCM is used for Tegra Audio. https://lkml.org/lkml/2020/2/20/91 https://lkml.org/lkml/2020/4/30/519 - The simple-card driver is used for Tegra Audio and accordingly some enhancements are made in simple-card and core drivers. - Patch [8/23] to [18/23] are related to simple-card and core changes. - Patch [23/23] adds sound card support to realize complete audio path. This is based on simple-card driver with proposed enhancements. - Re-ordered patches depending on above v2 -> v3 -------- * [1/10] "dt-bindings: sound: tegra: add DT binding for AHUB - Updated licence - Removed redundancy w.r.t items/const/enum - Added constraints wherever needed with "pattern" property * [2/10] "ASoC: tegra: add support for CIF programming" - Removed tegra_cif.c - Instead added inline helper function in tegra_cif.h * common changes (for patch [3/10] to [7/10]) - Replace LATE system calls with Normal sleep - Remove explicit RPM suspend in driver remove() call - Use devm_kzalloc() instead of devm_kcalloc() for single element - Replace 'ret' with 'err' for better reading - Consistent error printing style across drivers - Minor formating fixes * [8/10] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/10] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later" (New patch) - Enables ACONNECT and AHUB components. With this AHUB and components are registered with ASoC core. v1 -> v2 -------- * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB" - no changes * [2/9] "ASoC: tegra: add support for CIF programming" - removed CIF programming changes for legacy chips. - this patch now exposes helper function for CIF programming, which can be used on Tegra210 later. - later tegra_cif.c can be extended for legacy chips as well. - updated commit message accordingly * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver" - removed unnecessary initialization of 'ret' in probe() * [4/9] "ASoC: tegra: add Tegra210 based I2S driver" - removed unnecessary initialization of 'ret' in probe() - fixed indentation - added consistent bracing for if-else clauses - updated 'rx_fifo_th' type to 'unsigned int' - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver" - used of_device_get_match_data() to get 'soc_data' and removed explicit of_match_device() - used devm_platform_ioremap_resource() and removed explicit platform_get_resource() - fixed indentation for devm_snd_soc_register_component() - updated commit message - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver" - removed unnecessary initialization of 'ret' in probe() - updated 'max_th' to 'unsigned int' - shortened lengthy macro names to avoid wrapping in tegra186_dspk_wr_reg() and to be consistent * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver" - used of_device_get_match_data() and removed explicit of_match_device() - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [8/9] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * common changes for patch [3/9] to [7/9] - sorted headers in alphabetical order - moved MODULE_DEVICE_TABLE() right below *_of_match table - removed macro DRV_NAME - removed explicit 'owner' field from platform_driver structure - added 'const' to snd_soc_dai_ops structure Sameer Pujar (11): ASoC: dt-bindings: tegra: Add DT bindings for Tegra210 ASoC: tegra: Add support for CIF programming ASoC: tegra: Add Tegra210 based DMIC driver ASoC: tegra: Add Tegra210 based I2S driver ASoC: tegra: Add Tegra210 based AHUB driver ASoC: tegra: Add Tegra186 based DSPK driver ASoC: tegra: Add Tegra210 based ADMAIF driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Build ADMA and ACONNECT driver arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Add DT binding for AHUB components .../bindings/sound/nvidia,tegra186-dspk.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-admaif.yaml | 111 +++ .../bindings/sound/nvidia,tegra210-ahub.yaml | 136 ++++ .../bindings/sound/nvidia,tegra210-dmic.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-i2s.yaml | 101 +++ arch/arm64/boot/dts/nvidia/tegra186.dtsi | 217 +++++- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 225 +++++- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 12 + arch/arm64/boot/dts/nvidia/tegra210.dtsi | 140 ++++ arch/arm64/configs/defconfig | 8 + sound/soc/tegra/Kconfig | 56 ++ sound/soc/tegra/Makefile | 10 + sound/soc/tegra/tegra186_dspk.c | 442 +++++++++++ sound/soc/tegra/tegra186_dspk.h | 70 ++ sound/soc/tegra/tegra210_admaif.c | 800 ++++++++++++++++++++ sound/soc/tegra/tegra210_admaif.h | 162 ++++ sound/soc/tegra/tegra210_ahub.c | 676 +++++++++++++++++ sound/soc/tegra/tegra210_ahub.h | 127 ++++ sound/soc/tegra/tegra210_dmic.c | 455 ++++++++++++ sound/soc/tegra/tegra210_dmic.h | 82 +++ sound/soc/tegra/tegra210_i2s.c | 812 +++++++++++++++++++++ sound/soc/tegra/tegra210_i2s.h | 126 ++++ sound/soc/tegra/tegra_cif.h | 65 ++ sound/soc/tegra/tegra_pcm.c | 235 +++++- sound/soc/tegra/tegra_pcm.h | 21 +- 25 files changed, 5251 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml create mode 100644 sound/soc/tegra/tegra186_dspk.c create mode 100644 sound/soc/tegra/tegra186_dspk.h create mode 100644 sound/soc/tegra/tegra210_admaif.c create mode 100644 sound/soc/tegra/tegra210_admaif.h create mode 100644 sound/soc/tegra/tegra210_ahub.c create mode 100644 sound/soc/tegra/tegra210_ahub.h create mode 100644 sound/soc/tegra/tegra210_dmic.c create mode 100644 sound/soc/tegra/tegra210_dmic.h create mode 100644 sound/soc/tegra/tegra210_i2s.c create mode 100644 sound/soc/tegra/tegra210_i2s.h create mode 100644 sound/soc/tegra/tegra_cif.h -- 2.7.4
-
Sameer Pujar authored
ADMAIF is the interface between ADMA and AHUB. Each ADMA channel that sends/receives data to/from AHUB must intreface through an ADMAIF channel. ADMA channel sending data to AHUB pairs with an ADMAIF Tx channel and similarly ADMA channel receiving data from AHUB pairs with an ADMAIF Rx channel. Buffer size is configurable for each ADMAIF channel, but currently SW uses default values. This patch registers ADMAIF driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADMAIF interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow to build the driver. The ADMAIF device can be enabled in the DT via "nvidia,tegra210-admaif" compatible binding. Tegra PCM driver is updated to expose required PCM interfaces and snd_pcm_ops callbacks. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1595134890-16470-8-git-send-email-spujar@nvidia.comSigned-off-by:
-
Dan Murphy authored
Convert the tas2770 binding to yaml format. Add in the reset-gpio to the binding as it is in the code but not documented in the binding. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200720181202.31000-1-dmurphy@ti.comSigned-off-by:
-
Dan Murphy authored
Fix the reset property name when allocating the GPIO descriptor. The gpiod_get_optional appends either the -gpio or -gpios suffix to the name. Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by:
-
Thierry Reding authored
Convert the Freescale SGTL5000 device tree bindings from free-form text format to json-schema. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200608174658.1315325-1-thierry.reding@gmail.comSigned-off-by:
-
- 20 Jul, 2020 20 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Small patchset to harden the SoundWire machine driver, change bad HIDs, update PLL settings and avoid memory leaks. Given that the SoundWire core parts are not upstream it's probably not necessary to provide the patches to stable branches. Bard Liao (1): ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name Kai Vehmanen (2): ASoC: Intel: sof_sdw: add support for systems without i915 audio ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded Libin Yang (1): ASoC: Intel: common: change match table ehl-rt5660 Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw_rt711: remove properties in card remove Yong Zhi (1): ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq sound/soc/intel/boards/sof_rt5682.c | 9 +++++- sound/soc/intel/boards/sof_sdw.c | 31 +++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 2 ++ sound/soc/intel/boards/sof_sdw_hdmi.c | 6 ++++ sound/soc/intel/boards/sof_sdw_rt711.c | 17 +++++++++- .../intel/common/soc-acpi-intel-ehl-match.c | 2 +- 6 files changed, 54 insertions(+), 13 deletions(-) base-commit: 22e9b543 -- 2.25.1
-
Yong Zhi authored
In commit d696a614 ("ASoC: rt1015: Add condition to prevent SoC providing bclk in ratio of 50 times of sample rate."), PLL input at 50fs is no longer supported, the new recommended settings at 48Khz rate are: PLL input SSP bclk ------------------------ 64fs 3.073Mhz 100fs 4.8Mhz (bclk update is reflected in topoplogy.) Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Kai Vehmanen authored
The mc_private->hdmi_pcm_list is populated by elements loaded during DSP topology load. Valid topologies for this machine driver will always have PCM nodes for HDMI, but driver should fail gracefully even in the case this is not true. Add a sanity check to sof_sdw_hdmi_card_late_probe() for this case. Without the fix, a null pcm handle gets dereferenced. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Link: https://lore.kernel.org/r/20200717211337.31956-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Kai Vehmanen authored
Extend the generic SOF Soundwire machine driver to support systems where iDisp HDMI/DP audio codec is disabled for some reason (i915 driver disabled, HDMI/DP implemented with a discrete GPU, etc). Switch codecs to SoC dummy in the affected DAI links. This allows to reuse existing topologies for this case. Signed-off-by:
-
Pierre-Louis Bossart authored
The rt711 jack detection properties are set from the machine drivers during the card probe, as done in other ASoC examples. KASAN reports a use-after-free error when unbinding drivers due to a confusing sequence between the ACPI core, the device core and the SoundWire device cleanups. Rather than fixing this sequence, follow the recommendation to have the same caller add and remove properties, add an explicit device_remove_properties() in the card .remove() callback. In future patches the use of device_add/remove_properties will be replaced by a direct handling of a swnode, but the sequence will remain the same. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Bard Liao authored
We can get codec name from dai link. Suggested-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Mark Brown authored
Merge series "Add ASoC AHUB components for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>: Overview ======== Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio pre-processing and post-processing. It also includes a programmable full crossbar for routing audio data across these accelerators. This series exposes some of these below mentioned HW devices as ASoC components for Tegra platforms from Tegra210 onwards. * ADMAIF : The interface between ADMA and AHUB * XBAR : Crossbar for routing audio samples across various modules * I2S : Inter-IC Sound Controller * DMIC : Digital Microphone * DSPK : Digital Speaker Following is the summary of current series. * Add YAML DT binding documentation for above mentioned modules. * Helper function for ACIF programming is exposed for Tegra210 and later. * Add ASoC driver components for each of the above modules. * Build ACONNECT and ADMA drivers which are essential to realize audio use case. * Add DT entries for above components for Tegra210, Tegra186 and Tegra194. As per the suggestion in [0] audio graph based sound card support is pushed in a separate series. [0] https://lkml.org/lkml/2020/6/27/4 Changelog ========= v4 -> v5 -------- * Common changes - simple-card driver changes are dropped. Changes are migrated to audio graph card and are moved to a separate series as suggested. - '#sound-dai-cells' property is not needed for planned audio graph card Hence dropped from documentation and related DT binding of component drivers. - CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to represent DAI links using audio graph card. Similary DAIs are added in AHUB driver to describe endpoints in audio crossbar. Routing is updated to reflect the same in drivers. v3 -> v4 -------- * [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210" - Removed multiple examples and retained one example per doc - Fixed as per inputs on the previous series - Tested bindings with 'make dt_binding_check/dtbs_check' * [2/23] "ASoC: tegra: Add support for CIF programming" - No change * Common changes (for patch [3/10] to [7/10]) - Mixer control overrides, for PCM parameters (rate, channel, bits), in each driver are dropped. - Updated routing as per DPCM usage - Minor changes related to formatting * New changes (patch [8/23] to [18/23] and patch [23/23]) - Based on discussions in following threads DPCM is used for Tegra Audio. https://lkml.org/lkml/2020/2/20/91 https://lkml.org/lkml/2020/4/30/519 - The simple-card driver is used for Tegra Audio and accordingly some enhancements are made in simple-card and core drivers. - Patch [8/23] to [18/23] are related to simple-card and core changes. - Patch [23/23] adds sound card support to realize complete audio path. This is based on simple-card driver with proposed enhancements. - Re-ordered patches depending on above v2 -> v3 -------- * [1/10] "dt-bindings: sound: tegra: add DT binding for AHUB - Updated licence - Removed redundancy w.r.t items/const/enum - Added constraints wherever needed with "pattern" property * [2/10] "ASoC: tegra: add support for CIF programming" - Removed tegra_cif.c - Instead added inline helper function in tegra_cif.h * common changes (for patch [3/10] to [7/10]) - Replace LATE system calls with Normal sleep - Remove explicit RPM suspend in driver remove() call - Use devm_kzalloc() instead of devm_kcalloc() for single element - Replace 'ret' with 'err' for better reading - Consistent error printing style across drivers - Minor formating fixes * [8/10] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/10] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later" (New patch) - Enables ACONNECT and AHUB components. With this AHUB and components are registered with ASoC core. v1 -> v2 -------- * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB" - no changes * [2/9] "ASoC: tegra: add support for CIF programming" - removed CIF programming changes for legacy chips. - this patch now exposes helper function for CIF programming, which can be used on Tegra210 later. - later tegra_cif.c can be extended for legacy chips as well. - updated commit message accordingly * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver" - removed unnecessary initialization of 'ret' in probe() * [4/9] "ASoC: tegra: add Tegra210 based I2S driver" - removed unnecessary initialization of 'ret' in probe() - fixed indentation - added consistent bracing for if-else clauses - updated 'rx_fifo_th' type to 'unsigned int' - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver" - used of_device_get_match_data() to get 'soc_data' and removed explicit of_match_device() - used devm_platform_ioremap_resource() and removed explicit platform_get_resource() - fixed indentation for devm_snd_soc_register_component() - updated commit message - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver" - removed unnecessary initialization of 'ret' in probe() - updated 'max_th' to 'unsigned int' - shortened lengthy macro names to avoid wrapping in tegra186_dspk_wr_reg() and to be consistent * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver" - used of_device_get_match_data() and removed explicit of_match_device() - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [8/9] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * common changes for patch [3/9] to [7/9] - sorted headers in alphabetical order - moved MODULE_DEVICE_TABLE() right below *_of_match table - removed macro DRV_NAME - removed explicit 'owner' field from platform_driver structure - added 'const' to snd_soc_dai_ops structure Sameer Pujar (11): ASoC: dt-bindings: tegra: Add DT bindings for Tegra210 ASoC: tegra: Add support for CIF programming ASoC: tegra: Add Tegra210 based DMIC driver ASoC: tegra: Add Tegra210 based I2S driver ASoC: tegra: Add Tegra210 based AHUB driver ASoC: tegra: Add Tegra186 based DSPK driver ASoC: tegra: Add Tegra210 based ADMAIF driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Build ADMA and ACONNECT driver arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Add DT binding for AHUB components .../bindings/sound/nvidia,tegra186-dspk.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-admaif.yaml | 111 +++ .../bindings/sound/nvidia,tegra210-ahub.yaml | 136 ++++ .../bindings/sound/nvidia,tegra210-dmic.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-i2s.yaml | 101 +++ arch/arm64/boot/dts/nvidia/tegra186.dtsi | 217 +++++- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 225 +++++- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 12 + arch/arm64/boot/dts/nvidia/tegra210.dtsi | 140 ++++ arch/arm64/configs/defconfig | 8 + sound/soc/tegra/Kconfig | 56 ++ sound/soc/tegra/Makefile | 10 + sound/soc/tegra/tegra186_dspk.c | 442 +++++++++++ sound/soc/tegra/tegra186_dspk.h | 70 ++ sound/soc/tegra/tegra210_admaif.c | 800 ++++++++++++++++++++ sound/soc/tegra/tegra210_admaif.h | 162 ++++ sound/soc/tegra/tegra210_ahub.c | 676 +++++++++++++++++ sound/soc/tegra/tegra210_ahub.h | 127 ++++ sound/soc/tegra/tegra210_dmic.c | 455 ++++++++++++ sound/soc/tegra/tegra210_dmic.h | 82 +++ sound/soc/tegra/tegra210_i2s.c | 812 +++++++++++++++++++++ sound/soc/tegra/tegra210_i2s.h | 126 ++++ sound/soc/tegra/tegra_cif.h | 65 ++ sound/soc/tegra/tegra_pcm.c | 235 +++++- sound/soc/tegra/tegra_pcm.h | 21 +- 25 files changed, 5251 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml create mode 100644 sound/soc/tegra/tegra186_dspk.c create mode 100644 sound/soc/tegra/tegra186_dspk.h create mode 100644 sound/soc/tegra/tegra210_admaif.c create mode 100644 sound/soc/tegra/tegra210_admaif.h create mode 100644 sound/soc/tegra/tegra210_ahub.c create mode 100644 sound/soc/tegra/tegra210_ahub.h create mode 100644 sound/soc/tegra/tegra210_dmic.c create mode 100644 sound/soc/tegra/tegra210_dmic.h create mode 100644 sound/soc/tegra/tegra210_i2s.c create mode 100644 sound/soc/tegra/tegra210_i2s.h create mode 100644 sound/soc/tegra/tegra_cif.h -- 2.7.4
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Small patchset to harden the SoundWire machine driver, change bad HIDs, update PLL settings and avoid memory leaks. Given that the SoundWire core parts are not upstream it's probably not necessary to provide the patches to stable branches. Bard Liao (1): ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name Kai Vehmanen (2): ASoC: Intel: sof_sdw: add support for systems without i915 audio ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded Libin Yang (1): ASoC: Intel: common: change match table ehl-rt5660 Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw_rt711: remove properties in card remove Yong Zhi (1): ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq sound/soc/intel/boards/sof_rt5682.c | 9 +++++- sound/soc/intel/boards/sof_sdw.c | 31 +++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 2 ++ sound/soc/intel/boards/sof_sdw_hdmi.c | 6 ++++ sound/soc/intel/boards/sof_sdw_rt711.c | 17 +++++++++- .../intel/common/soc-acpi-intel-ehl-match.c | 2 +- 6 files changed, 54 insertions(+), 13 deletions(-) base-commit: 22e9b543 -- 2.25.1
-
Randy Dunlap authored
Drop the repeated word "be" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Link: https://lore.kernel.org/r/20200719003307.21403-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Fix the doubled word "in" in a comment by adding punctuation in 3 places and capitalization. Signed-off-by:
-
Randy Dunlap authored
Delete the doubled word "to" in two comments. Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type 'u8 reserved'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/skylake-20200717.md Link: https://lore.kernel.org/r/20200717215500.GA13910@embeddedorSigned-off-by:
-
Sameer Pujar authored
The Digital Speaker Controller (DSPK) converts the multi-bit Pulse Code Modulation (PCM) audio input to oversampled 1-bit Pulse Density Modulation (PDM) output. From the signal flow perpsective, the DSPK can be viewed as a PDM transmitter that up-samples the input to the desired sampling rate by interpolation then converts the oversampled PCM input to the desired 1-bit output via Delta Sigma Modulation (DSM). This patch registers DSPK component with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes DSPK interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow to build the driver. The DSPK devices can be enabled in the DT via "nvidia,tegra186-dspk" compatible binding. This driver can be used on Tegra194 chip as well. Signed-off-by:
-
Sameer Pujar authored
The Audio Hub (AHUB) comprises a collection of hardware accelerators for audio pre/post-processing and a programmable full crossbar (XBAR) for routing audio data across these accelerators in time and in parallel. AHUB supports multiple interfaces to I2S, DSPK, DMIC etc., XBAR is a switch used to configure or modify audio routing between HW accelerators present inside AHUB. This patch registers AHUB component with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes AHUB interfaces, which can be used to connect different components in the ASoC layer. Currently the driver takes care of XBAR programming to allow audio data flow through various clients of the AHUB. Makefile and Kconfig support is added to allow to build the driver. The AHUB component can be enabled in the DT via below compatible bindings. - "nvidia,tegra210-ahub" for Tegra210 - "nvidia,tegra186-ahub" for Tegra186 and Tegra194 Signed-off-by:
-
Sameer Pujar authored
The Inter-IC Sound (I2S) controller implements full-duplex, bi-directional and single direction point to point serial interface. It can interface with I2S compatible devices. Tegra I2S controller can operate as both master and slave. This patch registers I2S controller with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes I2S interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow to build the driver. The I2S devices can be enabled in the DT via "nvidia,tegra210-i2s" compatible binding. Signed-off-by:
-
Sameer Pujar authored
The Digital MIC (DMIC) Controller is used to interface with Pulse Density Modulation (PDM) input devices. The DMIC controller implements a converter to convert PDM signals to Pulse Code Modulation (PCM) signals. From signal flow perspective, the DMIC can be viewed as a PDM receiver. This patch registers DMIC component with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes DMIC interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow to build the driver. The DMIC devices can be enabled in the DT via "nvidia,tegra210-dmic" compatible string. This driver can be used for Tegra186 and Tegra194 chips as well. Signed-off-by:
-
Sameer Pujar authored
Audio Client Interface (CIF) is a proprietary interface employed to route audio samples through Audio Hub (AHUB) components by inter connecting the various modules. This patch exports an inline function tegra_set_cif() which can be used, for now, to program CIF on Tegra210 and later Tegra generations. Later it can be extended to include helpers for legacy chips as well. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/1595134890-16470-3-git-send-email-spujar@nvidia.comSigned-off-by:
-
Sameer Pujar authored
This patch adds YAML schema for DT binding of AHUB and few of its following components. These devices will be registered as ASoC components and binding will be used on Tegra210 and later chips. * ADMAIF * I2S * DMIC * DSPK DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nvidia.com; s=n1; t=1595134894; bh=DX96zRQRNplPikN828HbAfbjGumAn9IgtktrsenKjgk=; h=X-PGP-Universal:From:To:CC:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:X-NVConfidentiality:MIME-Version: Content-Type; b=IhfGFjMxsnRHso1Ku2GEGC+mtLCy3AbRKPfgTS56XGqEWquUr/1s8n9tFpriqF7a+ tJGrTN9mKhRQGrwdey/AHsMY4Tbm4fKEWxIASgAV/lFPCfgP3BnVjEdHclc7FdBaB0 Qvd3zs8HFsgoIzksLrtHNMrUepkeZajn0/XnC7nghGDRim4+6Hauupr5kj/KVlihsS KS1YQ2Zz9TZzLaC5QXALiHj3ATLvBFrmIf6Vj19q7hePt0menTZVzQNy+y3h4xZfLH +OvBCsLgHGGhq+iM9rm64D+S5Op2vCslwq3Q/42TnYZ0vDbD7aA9nTAQzfYeI6HK6b vi7eYbryzCTSg== Signed-off-by:
-
Libin Yang authored
This configuration is for EHL with the RT5660 codec. RT5660 should use "10EC5660" ID instead of "INTC1027". Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
-
Kuninori Morimoto authored
All drivers are now using .mute_stream. Let's remove .digital_mute. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/87h7u72dqz.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
- 17 Jul, 2020 11 commits
-
-
Mark Brown authored
Merge series "ASoC: merge .digital_mute() into .mute_stream()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are v4 digital_mute() patch which adjusts to atmel which had conflict on v3. v3 -> v4 - tidyup for atmel which had conflict v2 -> v3 - uses "xxx_mute_stream" for .mute_stream naming if it was better - removed verbose Cc email address v1 -> v2 - return -ENOTSUPP at hdmi-codec - add new .no_capture_mute flag and emulate .digital_mute() by .mute_stream() Link: https://lore.kernel.org/r/87h7uhxxk6.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/874kqy2y5t.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87ftam37ko.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (3): ASoC: soc-dai: remove .digital_mute ASoC: soc-core: snd_soc_dai_digital_mute() for both CPU/Codec ASoC: soc-xxx: add asoc_substream_to_rtd() include/sound/soc-dai.h | 1 - include/sound/soc.h | 2 + sound/soc/soc-component.c | 20 ++++----- sound/soc/soc-core.c | 4 +- sound/soc/soc-dai.c | 12 ++---- sound/soc/soc-dapm.c | 6 +-- sound/soc/soc-generic-dmaengine-pcm.c | 4 +- sound/soc/soc-link.c | 12 +++--- sound/soc/soc-pcm.c | 62 +++++++++++++-------------- sound/soc/soc-utils.c | 2 +- 10 files changed, 61 insertions(+), 64 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "Add support for SATA/PCIe/USB2[3]/VIN/CSI on R8A774E1" from Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>: Hi All, This patch series adds support for the following peripherals on RZ/G2H SoC * PCIe * SATA * USB2 * USB3 * Audio * VIN * CSI Cheers, Prabhakar Lad Prabhakar (20): dt-bindings: pci: rcar-pci: Add device tree support for r8a774e1 arm64: dts: renesas: r8a774e1: Add PCIe device nodes dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add SATA controller node dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add USB2.0 phy and host (EHCI/OHCI) device nodes dt-bindings: usb: renesas,usb3-peri: Document r8a774e1 support dt-bindings: usb: usb-xhci: Document r8a774e1 support dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add USB3.0 device nodes dt-bindings: usb: renesas,usbhs: Add r8a774e1 support dt-bindings: dma: renesas,usb-dmac: Add binding for r8a774e1 arm64: dts: renesas: r8a774e1: Add USB-DMAC and HSUSB device nodes dt-bindings: sound: renesas,rsnd: Document r8a774e1 bindings arm64: dts: renesas: r8a774e1: Add audio support dt-bindings: media: renesas,csi2: Add R8A774E1 support dt-bindings: media: renesas,vin: Add R8A774E1 support media: rcar-csi2: Enable support for R8A774E1 media: rcar-vin: Enable support for R8A774E1 arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes .../bindings/ata/renesas,rcar-sata.yaml | 1 + .../bindings/dma/renesas,usb-dmac.yaml | 1 + .../bindings/media/renesas,csi2.yaml | 1 + .../bindings/media/renesas,vin.yaml | 1 + .../devicetree/bindings/pci/rcar-pci.txt | 1 + .../bindings/phy/renesas,usb2-phy.yaml | 1 + .../bindings/phy/renesas,usb3-phy.yaml | 1 + .../bindings/sound/renesas,rsnd.txt | 1 + .../bindings/usb/renesas,usb3-peri.yaml | 1 + .../bindings/usb/renesas,usbhs.yaml | 1 + .../devicetree/bindings/usb/usb-xhci.txt | 1 + arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 989 +++++++++++++++++- drivers/media/platform/rcar-vin/rcar-core.c | 40 + drivers/media/platform/rcar-vin/rcar-csi2.c | 4 + 14 files changed, 1022 insertions(+), 22 deletions(-) -- 2.17.1 -
Shuming Fan authored
Some settings should set to default value after the calibration. This patch also disables the 25MHz and 1MHz clock power when the jack unplugged. The JD is triggered by JDH, therefore this patch removes JDL setting. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20200717070228.28660-1-shumingf@realtek.comSigned-off-by:
-
Kuninori Morimoto authored
soc-dai is using discriminatory terms for comment. This patch renames "slave" to "secondary", thus we can keep M/S initials. Signed-off-by:
-
Tang Bin authored
In the function q6adm_open(), q6adm_alloc_copp() doesn't return NULL. Thus use IS_ERR() to validate the returned value instead of IS_ERR_OR_NULL(). And delete the extra line. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200714112744.20560-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Shuming Fan authored
The pin status of the widget was connected after the sound card registered. The rt5682_headset_detect function will use the pin status of these two widgets to decide the certain register setting on/off. Therefore this patch disables the pin of these two widgets in the codec probe. This patch could avoid the misjudgment. Signed-off-by:
-
Tang Bin authored
Use the defined variable "dev" to make the code cleaner. Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_dai_digital_mute() is used for both CPU and Codec. For example, soc_pcm_prepare() / soc_pcm_hw_free() are caring both CPU and Codec. But soc_resume_deferred() / snd_soc_suspend() are not. This patch cares it. Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_dai_digital_mute() is internally using both mute_stream() (1) or digital_mute() (2), but the difference between these 2 are only handling direction. We can merge digital_mute() into mute_stream int snd_soc_dai_digital_mute(xxx, int direction) { ... else if (dai->driver->ops->mute_stream) (1) return dai->driver->ops->mute_stream(xxx, direction); else if (direction == SNDRV_PCM_STREAM_PLAYBACK && dai->driver->ops->digital_mute) (2) return dai->driver->ops->digital_mute(xxx); ... } - Signed-off-by:Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/87eepb2dnq.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Lad Prabhakar authored
Document SoC specific bindings for RZ/G2H (r8a774e1) SoC. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1594919915-5225-15-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
Jing Xiangfeng authored
axg_card_add_tdm_loopback() misses to call kfree() in an error path. We can use devm_kasprintf() to fix the issue, also improve maintainability. So use it instead. Fixes: c84836d7 ("ASoC: meson: axg-card: use modern dai_link style") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200717082242.130627-1-jingxiangfeng@huawei.comSigned-off-by:
-
- 16 Jul, 2020 1 commit
-
-
Mark Brown authored
Merge series "ALSA: hda: export snd_hda_codec_cleanup()" from Kai Vehmanen <kai.vehmanen@linux.intel.com>: Hi, this small series is preparation for a set of bugfix ASoC patches addressing a memleak at module unload for the HDA codec wrapper. Instead of duplicating HDA code in ASoC tree, I chose to export more functionality from hda_codec.c so it can be (re)used in ASoC's hdac_hda.c. Full series: https://github.com/thesofproject/linux/pull/2252 Takashi and Mark, feedback is welcome on how to best handle this kind of series where I have dependent patches both in sound/pci/hda and in ASoC. For this series, I'm sending the patches separately and when/if first set is merged by Takashi, I'll route the ASoC patches via our usually SOF set to Mark. Kai Vehmanen (2): ALSA: hda: export snd_hda_codec_cleanup_for_unbind() ALSA: hda: fix snd_hda_codec_cleanup() documentation include/sound/hda_codec.h | 2 ++ sound/pci/hda/hda_codec.c | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) -- 2.27.0
-
