- 01 Jul, 2024 8 commits
-
-
Michael Chan authored
The new BCM5760X chips will generate this new TX timestamp completion when a TX packet's timestamp has been taken right before transmission. The driver logic to retrieve the timestamp will be added in the next few patches. Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nithin Dabilpuram authored
Octeontx2 hardware uses Near Data Cache(NDC) block to cache contexts in it so that access to LLC/DRAM can be avoided. It is recommended in HRM to sync the NDC contents before releasing/resetting LF resources. Hence implement NDC_SYNC mailbox and sync contexts during driver teardown. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
FUJITA Tomonori authored
Call phylink_ethtool_ksettings_get() for get_link_ksettings method and ethtool_op_get_link() for get_link method. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Merge tag 'nf-next-24-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: Patch #1 to #11 to shrink memory consumption for transaction objects: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. Series from Florian Westphal. For the record, I have mangled patch #1 to add nft_trans_container_*() and use if for every transaction object. I have also added BUILD_BUG_ON to ensure struct nft_trans always comes at the beginning of the container transaction object. And few minor cleanups, any new bugs are of my own. Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno. Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang. Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting default conntrack timeouts via nfnetlink_cttimeout API, from Lin Ma. Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use larger secctx names than the existing 256 bytes length. Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving nfnetlink_queue, from Florian Westphal. Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter. ==================== Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== tcp_metrics: add netlink protocol spec in YAML Add a netlink protocol spec for the tcp_metrics generic netlink family. First patch adjusts the uAPI header guards to make it easier to build tools/ with non-system headers. v1: https://lore.kernel.org/all/20240626201133.2572487-1-kuba@kernel.org ==================== Signed-off-by:
-
Jakub Kicinski authored
Add a protocol spec for tcp_metrics, so that it's accessible via YNL. Useful at the very least for testing fixes. In this episode of "10,000 ways to complicate netlink" the metric nest has defines which are off by 1. iproute2 does: struct rtattr *m[TCP_METRIC_MAX + 1 + 1]; parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a); for (i = 0; i < TCP_METRIC_MAX + 1; i++) { // ... attr = m[i + 1]; This is too weird to support in YNL, add a new set of defines with _correct_ values to the official kernel header. Signed-off-by:Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
tcp_metrics' header lacks the customary _UAPI in the header guard. This makes YNL build rules work less seamlessly. We can easily fix that on YNL side, but this could also be problematic if we ever needed to create a kernel-only tcp_metrics.h. Signed-off-by:
-
Marek Vasut authored
Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to indicate link status and activity. Add minimal LED controller driver supporting the most common uses with the 'netdev' trigger. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
- 29 Jun, 2024 18 commits
-
-
Jakub Kicinski authored
Edward Cree says: ==================== ethtool: track custom RSS contexts in the core Make the core responsible for tracking the set of custom RSS contexts, their IDs, indirection tables, hash keys, and hash functions; this lets us get rid of duplicative code in drivers, and will allow us to support netlink dumps later. This series only moves the sfc EF10 & EF100 driver over to the new API; other drivers (mvpp2, octeontx2, mlx5, sfc/siena, bnxt_en) can be converted afterwards and the legacy API removed. ==================== Link: https://patch.msgid.link/cover.1719502239.git.ecree.xilinx@gmail.comSigned-off-by:
-
Edward Cree authored
The core now always satisfies 'ethtool -x context nonzero' from its own tracking, so our lookup code for that case is never called. Remove it. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/b426fcc416dedc8f203e52eebef6891eccebe4c1.1719502240.git.ecree.xilinx@gmail.comSigned-off-by:
-
Edward Cree authored
On 'ethtool -x' with rss_context != 0, instead of calling the driver to read the RSS settings for the context, just get the settings from the rss_ctx xarray, and return them to the user with no driver involvement. Signed-off-by:
-
Edward Cree authored
The core is now responsible for allocating IDs and a memory region for us to store our state (struct efx_rss_context_priv), so we no longer need efx_alloc_rss_context_entry() and friends. Since the contexts are now maintained by the core, use the core's lock (net_dev->ethtool->rss_lock), rather than our own mutex (efx->rss_lock), to serialise access against changes; and remove the now-unused efx->rss_lock from struct efx_nic. Signed-off-by:
-
Edward Cree authored
While this is not needed to serialise the ethtool entry points (which are all under RTNL), drivers may have cause to asynchronously access dev->ethtool->rss_ctx; taking dev->ethtool->rss_lock allows them to do this safely without needing to take the RTNL. Signed-off-by:
-
Edward Cree authored
Currently passed as NULL, but will allow drivers to report back errors when ethnl support for these ops is added. Signed-off-by:
-
Edward Cree authored
Add a new API to create/modify/remove RSS contexts, that passes in the newly-chosen context ID (not as a pointer) rather than leaving the driver to choose it on create. Also pass in the ctx, allowing drivers to easily use its private data area to store their hardware-specific state. Keep the existing .set_rxfh API for now as a fallback, but deprecate it for custom contexts (rss_context != 0). Signed-off-by:
-
Edward Cree authored
Since drivers are still choosing the context IDs, we have to force the XArray to use the ID they've chosen rather than picking one ourselves, and handle the case where they give us an ID that's already in use. Signed-off-by:
-
Edward Cree authored
Each context stores the RXFH settings (indir, key, and hfunc) as well as optionally some driver private data. Delete any still-existing contexts at netdev unregister time. Signed-off-by:
-
Edward Cree authored
net_dev->ethtool is a pointer to new struct ethtool_netdev_state, which currently contains only the wol_enabled field. Suggested-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== selftests: drv-net: add ability to schedule cleanup with defer() Introduce a defer / cleanup mechanism for driver selftests. More detailed info in the second patch. ==================== Link: https://patch.msgid.link/20240627185502.3069139-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Use just added defer(). Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20240627185502.3069139-4-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
This implements what I was describing in [1]. When writing a test author can schedule cleanup / undo actions right after the creation completes, eg: cmd("touch /tmp/file") defer(cmd, "rm /tmp/file") defer() takes the function name as first argument, and the rest are arguments for that function. defer()red functions are called in inverse order after test exits. It's also possible to capture them and execute earlier (in which case they get automatically de-queued). undo = defer(cmd, "rm /tmp/file") # ... some unsafe code ... undo.exec() As a nice safety all exceptions from defer()ed calls are captured, printed, and ignored (they do make the test fail, however). This addresses the common problem of exceptions in cleanup paths often being unhandled, leading to potential leaks. There is a global action queue, flushed by ksft_run(). We could support function level defers too, I guess, but there's no immediate need.. Link: https://lore.kernel.org/all/877cedb2ki.fsf@nvidia.com/ # [1] Reviewed-by: -
Jakub Kicinski authored
Exception handlers print the result and use continue to skip the non-exception result printing. This makes inserting common post-test code hard. Refactor to avoid the continues and have only one ktap_result() call. Reviewed-by:
-
Jon Kohler authored
Add .get_channel to enic_ethtool_ops to enable basic ethtool -l support to get the current channel configuration. Note that the driver does not support dynamically changing queue configuration, so .set_channel is intentionally unused. Instead, users should use Cisco's hardware management tools (UCSM/IMC) to modify virtual interface card configuration out of band. Signed-off-by:
Jon Kohler <jon@nutanix.com> Link: https://patch.msgid.link/20240627202013.2398217-1-jon@nutanix.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Sitnicki says: ==================== Lift UDP_SEGMENT restriction for egress via device w/o csum offload This is a follow-up to an earlier question [1] if we can make UDP GSO work with any egress device, even those with no checksum offload capability. That's the default setup for TUN/TAP. Because there is a change in behavior - sendmsg() does no longer return EIO error - I'm submitting through net-next tree, rather than net, as per Willem's advice. [1] https://lore.kernel.org/netdev/87jzqsld6q.fsf@cloudflare.com/ v1: https://lore.kernel.org/r/20240622-linux-udpgso-v1-0-d2344157ab2a@cloudflare.com ==================== Link: https://patch.msgid.link/20240626-linux-udpgso-v2-0-422dfcbd6b48@cloudflare.comSigned-off-by:
-
Jakub Sitnicki authored
Extend the existing test to exercise UDP GSO egress through devices with various offload capabilities, including lack of checksum offload, which is the default case for TUN/TAP devices. Test against a dummy device because it is simpler to set up then TUN/TAP. Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240626-linux-udpgso-v2-2-422dfcbd6b48@cloudflare.comSigned-off-by:
-
Jakub Sitnicki authored
Today sending a UDP GSO packet from a TUN device results in an EIO error: import fcntl, os, struct from socket import * TUNSETIFF = 0x400454CA IFF_TUN = 0x0001 IFF_NO_PI = 0x1000 UDP_SEGMENT = 103 tun_fd = os.open("/dev/net/tun", os.O_RDWR) ifr = struct.pack("16sH", b"tun0", IFF_TUN | IFF_NO_PI) fcntl.ioctl(tun_fd, TUNSETIFF, ifr) os.system("ip addr add 192.0.2.1/24 dev tun0") os.system("ip link set dev tun0 up") s = socket(AF_INET, SOCK_DGRAM) s.setsockopt(SOL_UDP, UDP_SEGMENT, 1200) s.sendto(b"x" * 3000, ("192.0.2.2", 9)) # EIO This is due to a check in the udp stack if the egress device offers checksum offload. While TUN/TAP devices, by default, don't advertise this capability because it requires support from the TUN/TAP reader. However, the GSO stack has a software fallback for checksum calculation, which we can use. This way we don't force UDP_SEGMENT users to handle the EIO error and implement a segmentation fallback. Lift the restriction so that UDP_SEGMENT can be used with any egress device. We also need to adjust the UDP GSO code to match the GSO stack expectation about ip_summed field, as set in commit 8d63bee6 ("net: avoid skb_warn_bad_offload false positives on UFO"). Otherwise we will hit the bad offload check. Users should, however, expect a potential performance impact when batch-sending packets with UDP_SEGMENT without checksum offload on the egress device. In such case the packet payload is read twice: first during the sendmsg syscall when copying data from user memory, and then in the GSO stack for checksum computation. This double memory read can be less efficient than a regular sendmsg where the checksum is calculated during the initial data copy from user memory. Signed-off-by:
-
- 28 Jun, 2024 14 commits
-
-
Phil Sutter authored
Support tracking of up to 65535 packets per table entry instead of just 255 to better facilitate longer term tracking or higher throughput scenarios. Note how this aligns sizes of struct recent_entry's 'nstamps' and 'index' fields when 'nstamps' was larger before. This is unnecessary as the value of 'nstamps' grows along with that of 'index' after being initialized to 1 (see recent_entry_update()). Its value will thus never exceed that of 'index' and therefore does not need to provide space for larger values. Requested-by:
Fabio <pedretti.fabio@gmail.com> Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1745Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
If userspace program exits while the queue its subscribed to has packets those need to be discarded. commit dc21c6cc ("netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu()") fixed a (harmless) rcu splat that could be triggered in this case. Add a test case to cover this. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== selftest: Clean-up and stabilize mirroring tests The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy. mirror_test() accommodated this noisiness by giving the counters an allowance of several packets. But that only works up to a point, and on busy systems won't be always enough. In this patch set, clean up and stabilize the mirroring selftests. The original intention was to port the tests over to UDP, but the logic of ICMP ends up being so entangled in the mirroring selftests that the changes feel overly invasive. Instead, ICMP is kept, but where possible, we match on ICMP message type, thus filtering out hits by other ICMP messages. Where this is not practical (where the counter tap is put on a device that carries encapsulated packets), switch the counter condition to _at least_ X observed packets. This is less robust, but barely so -- probably the only scenario that this would not catch is something like erroneous packet duplication, which would hopefully get caught by the numerous other tests in this extensive suite. - Patches #1 to #3 clean up parameters at various helpers. - Patches #4 to #6 stabilize the mirroring selftests as described above. - Mirroring tests currently allow testing SW datapath even on HW netdevices by trapping traffic to the SW datapath. This complicates the tests a bit without a good reason: to test SW datapath, just run the selftests on the veth topology. Thus in patch #7, drop support for this dual SW/HW testing. - At this point, some cleanups were either made possible by the previous patches, or were always possible. In patches #8 to #11, realize these cleanups. - In patch #12, fix mlxsw mirror_gre selftest to respect setting TESTS. ==================== Signed-off-by: -
Petr Machata authored
This test is unusual in that overriding TESTS does not change the tests to be run. Split the individual tests into several functions and invoke them through tests_run() as appropriate. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
-
Petr Machata authored
Nothing calls these. Signed-off-by:
-
Petr Machata authored
These functions are not used anymore. Signed-off-by:
-
Petr Machata authored
The selftest does not use functions from mirror_gre_lib, ditch the import. It does not use arping either, so drop the require_command as well. Signed-off-by:
-
Petr Machata authored
After the previous patch, the function test_span_failable() is always called with should_fail=1. Drop the argument and streamline the code. Signed-off-by:
-
Petr Machata authored
The mirroring tests are currently run in a skip_hw and optionally a skip_sw mode. The former tests the SW datapath, the latter the HW datapath, if available. In order to be able to test SW datapath on HW loopbacks, traps are installed on ingress to get traffic from the HW datapath to the SW one. This adds an unnecessary complexity when it would be much simpler to just use a veth-based topology to test the SW datapath. Thus drop all the code that supports this dual testing. Signed-off-by:
-
Petr Machata authored
The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy, because besides the primary ICMP traffic, any amount of other service traffic is mirrored as well. mirror_test() accommodated this noisiness by giving the counters an allowance of several packets. But in the previous patch, where possible, counter taps were changed to match only on an exact ICMP message. At least in those cases, we can demand an exact number of packets to match. Where the tap is installed on a connective netdevice, the exact matching is not practical (though with u32, anything is possible). In those places, there should still be some leeway -- and probably bigger than before, because experience shows that these tests are very noisy. To that end, change mirror_test() so that it can be either called with an exact number to expect, or with an expression. Where leeway is needed, adjust callers to pass a ">= 10" instead of mere 10. Signed-off-by:
-
Petr Machata authored
The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy, because besides the primary ICMP traffic, any amount of other service traffic is mirrored as well. However, often the counter tap is installed at the remote end of the gretap tunnel. Since this is a SW-datapath scenario anyway, we can make the filter arbitrarily accurate. Thus in this patch, add parameters forward_type and backward_type to several mirroring test helpers, as some other helpers already have. Then change do_test_span_dir_ips() to instead of installing one generic tap and using it for test in both directions, install the tap for each direction separately, matching on the ICMP type given by these parameters. Signed-off-by:
-
Petr Machata authored
The test works by sending packets through a tunnel, whence they are forwarded to a LAG. One of the LAG children is removed from the LAG prior to the exercise, and the test then counts how many packets pass through the other one. The issue with this is that it counts all packets, not just the encapsulated ones. So instead add a second gretap endpoint to receive the sent packets, and check reception counters there. Signed-off-by:
-
Petr Machata authored
The argument $dir has a fallback value of "ingress". Move the fallback from the usage site to the argument definition block to make the fact clearer. Signed-off-by:
-
Petr Machata authored
The argument is not used by these functions except to propagate it for ultimately no purpose. Signed-off-by:
-
