Large verifier speed improvements allow to increase
verifier complexity limit.
Now regardless of the program composition and its size it takes
little time for the verifier to hit insn_processed limit.
On typical x86 machine non-debug kernel processes 1M instructions
in 1/10 of a second.
(before these speed improvements specially crafted programs
could be hitting multi-second verification times)
Full kasan kernel with debug takes ~1 second for the same 1M insns.
Hence bump the BPF_COMPLEXITY_LIMIT_INSNS limit to 1M.
Also increase the number of instructions per program
from 4k to internal BPF_COMPLEXITY_LIMIT_INSNS limit.
4k limit was confusing to users, since small programs with hundreds
of insns could be hitting BPF_COMPLEXITY_LIMIT_INSNS limit.
Sometimes adding more insns and bpf_trace_printk debug statements
would make the verifier accept the program while removing
code would make the verifier reject it.
Some user space application started to add #define MAX_FOO to
their programs and do:
  MAX_FOO=100;
again:
  compile with MAX_FOO;
  try to load;
  if (fails_to_load) { reduce MAX_FOO; goto again; }
to be able to fit maximum amount of processing into single program.
Other users artificially split their single program into a set of programs
and use all 32 iterations of tail_calls to increase compute limits.
And the most advanced folks used unlimited tc-bpf filter list
to execute many bpf programs.
Essentially the users managed to workaround 4k insn limit.
This patch removes the limit for root programs from uapi.
BPF_COMPLEXITY_LIMIT_INSNS is the kernel internal limit
and success to load the program no longer depends on program size,
but on 'smartness' of the verifier only.
The verifier will continue to get smarter with every kernel release.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Larger programs may trigger 16-bit jump offset overflow check
during instruction patching. Make this error verbose otherwise
users cannot decipher error code without printks in the verifier.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Temporary arrays used during program verification need to be vmalloc-ed
to support large bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

With large verifier speed improvement brought by the previous patch
mark_reg_read() becomes the hottest function during verification.
On a typical program it consumes 40% of cpu.
mark_reg_read() walks parentage chain of registers to mark parents as LIVE_READ.
Once the register is marked there is no need to remark it again in the future.
Hence stop walking the chain once first LIVE_READ is seen.
This optimization drops mark_reg_read() time from 40% of cpu to <1%
and overall 2x improvement of verification speed.
For some programs the longest_mark_read_walk counter improves from ~500 to ~5
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Branch instructions, branch targets and calls in a bpf program are
the places where the verifier remembers states that led to successful
verification of the program.
These states are used to prune brute force program analysis.
For unprivileged programs there is a limit of 64 states per such
'branching' instructions (maximum length is tracked by max_states_per_insn
counter introduced in the previous patch).
Simply reducing this threshold to 32 or lower increases insn_processed
metric to the point that small valid programs get rejected.
For root programs there is no limit and cilium programs can have
max_states_per_insn to be 100 or higher.
Walking 100+ states multiplied by number of 'branching' insns during
verification consumes significant amount of cpu time.
Turned out simple LRU-like mechanism can be used to remove states
that unlikely will be helpful in future search pruning.
This patch introduces hit_cnt and miss_cnt counters:
hit_cnt - this many times this state successfully pruned the search
miss_cnt - this many times this state was not equivalent to other states
(and that other states were added to state list)

The heuristic introduced in this patch is:
if (sl->miss_cnt > sl->hit_cnt * 3 + 3)
  /* drop this state from future considerations */

Higher numbers increase max_states_per_insn (allow more states to be
considered for pruning) and slow verification speed, but do not meaningfully
reduce insn_processed metric.
Lower numbers drop too many states and insn_processed increases too much.
Many different formulas were considered.
This one is simple and works well enough in practice.
(the analysis was done on selftests/progs/* and on cilium programs)

The end result is this heuristic improves verification speed by 10 times.
Large synthetic programs that used to take a second more now take
1/10 of a second.
In cases where max_states_per_insn used to be 100 or more, now it's ~10.

There is a slight increase in insn_processed for cilium progs:
                       before   after
bpf_lb-DLB_L3.o 	1831	1838
bpf_lb-DLB_L4.o 	3029	3218
bpf_lb-DUNKNOWN.o 	1064	1064
bpf_lxc-DDROP_ALL.o	26309	26935
bpf_lxc-DUNKNOWN.o	33517	34439
bpf_netdev.o		9713	9721
bpf_overlay.o		6184	6184
bpf_lcx_jit.o		37335	39389
And 2-3 times improvement in the verification speed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In order to understand the verifier bottlenecks add various stats
and extend log_level:
log_level 1 and 2 are kept as-is:
bit 0 - level=1 - print every insn and verifier state at branch points
bit 1 - level=2 - print every insn and verifier state at every insn
bit 2 - level=4 - print verifier error and stats at the end of verification

When verifier rejects the program the libbpf is trying to load the program twice.
Once with log_level=0 (no messages, only error code is reported to user space)
and second time with log_level=1 to tell the user why the verifier rejected it.

With introduction of bit 2 - level=4 the libbpf can choose to always use that
level and load programs once, since the verification speed is not affected and
in case of error the verbose message will be available.

Note that the verifier stats are not part of uapi just like all other
verbose messages. They're expected to change in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch adds new config option to trigger generation of BTF type
information from DWARF debuginfo for vmlinux and kernel modules through
pahole, which in turn relies on libbpf for btf_dedup() algorithm.

The intent is to record compact type information of all types used
inside kernel, including all the structs/unions/typedefs/etc. This
enables BPF's compile-once-run-everywhere ([0]) approach, in which
tracing programs that are inspecting kernel's internal data (e.g.,
struct task_struct) can be compiled on a system running some kernel
version, but would be possible to run on other kernel versions (and
configurations) without recompilation, even if the layout of structs
changed and/or some of the fields were added, removed, or renamed.

This is only possible if BPF loader can get kernel type info to adjust
all the offsets correctly. This patch is a first time in this direction,
making sure that BTF type info is part of Linux kernel image in
non-loadable ELF section.

BTF deduplication ([1]) algorithm typically provides 100x savings
compared to DWARF data, so resulting .BTF section is not big as is
typically about 2MB in size.

[0] http://vger.kernel.org/lpc-bpf2018.html#session-2
[1] https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Stanislav Fomichev says:

====================
This series contains small fixes to make bpf selftests compile cleanly
with clangs. All of them are not real problems, but it's nice to have
an option to use clang for the tests themselves.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

verifier/ctx_skb.c:708:11: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
        .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Use standard C99 %zu for sizeof, not GCC's custom %Zu:
bpf_obj_id.c:76:48: warning: invalid conversion specifier 'Z'
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

flow_dissector_load.c:55:19: warning: format string is not a string literal (potentially insecure)
      [-Wformat-security]
                error(1, errno, command);
                                ^~~~~~~
flow_dissector_load.c:55:19: note: treat the string as an argument to avoid this
                error(1, errno, command);
                                ^
                                "%s",
1 warning generated.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This makes sure we don't put headers as input files when doing
compilation, because clang complains about the following:

clang-9: error: cannot specify -o when generating multiple output files
../lib.mk:152: recipe for target 'xxx/tools/testing/selftests/bpf/test_verifier' failed
make: *** [xxx/tools/testing/selftests/bpf/test_verifier] Error 1
make: *** Waiting for unfinished jobs....
clang-9: error: cannot specify -o when generating multiple output files
../lib.mk:152: recipe for target 'xxx/tools/testing/selftests/bpf/test_progs' failed
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

For multiple dimensional arrays like below,
  int a[2][3]
both llvm and pahole generated one BTF_KIND_ARRAY type like
  . element_type: int
  . index_type: unsigned int
  . number of elements: 6

Such a collapsed BTF_KIND_ARRAY type will cause the divergence
in BTF vs. the user code. In the compile-once-run-everywhere
project, the header file is generated from BTF and used for bpf
program, and the definition in the header file will be different
from what user expects.

But the kernel actually supports chained multi-dimensional array
types properly. The above "int a[2][3]" can be represented as
  Type #n:
    . element_type: int
    . index_type: unsigned int
    . number of elements: 3
  Type #(n+1):
    . element_type: type #n
    . index_type: unsigned int
    . number of elements: 2

The following llvm commit
  https://reviews.llvm.org/rL357215
also enables llvm to generated proper chained multi-dimensional arrays.

The test_btf already has a raw test ("struct test #1") for chained
multi-dimensional arrays. This patch added amended bpffs test for
chained multi-dimensional arrays.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Andrey Ignatov says:

====================
The patch set adds support for stack access with variable offset from helpers.

Patch 1 is the main patch in the set and provides more details.
Patch 2 adds selftests for new functionality.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test different scenarios of indirect variable-offset stack access: out of
bound access (>0), min_off below initialized part of the stack,
max_off+size above initialized part of the stack, initialized stack.

Example of output:
  ...
  #856/p indirect variable-offset stack access, out of bound OK
  #857/p indirect variable-offset stack access, max_off+size > max_initialized OK
  #858/p indirect variable-offset stack access, min_off < min_initialized OK
  #859/p indirect variable-offset stack access, ok OK
  ...
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently there is a difference in how verifier checks memory access for
helper arguments for PTR_TO_MAP_VALUE and PTR_TO_STACK with regard to
variable part of offset.

check_map_access, that is used for PTR_TO_MAP_VALUE, can handle variable
offsets just fine, so that BPF program can call a helper like this:

  some_helper(map_value_ptr + off, size);

, where offset is unknown at load time, but is checked by program to be
in a safe rage (off >= 0 && off + size < map_value_size).

But it's not the case for check_stack_boundary, that is used for
PTR_TO_STACK, and same code with pointer to stack is rejected by
verifier:

  some_helper(stack_value_ptr + off, size);

For example:
  0: (7a) *(u64 *)(r10 -16) = 0
  1: (7a) *(u64 *)(r10 -8) = 0
  2: (61) r2 = *(u32 *)(r1 +0)
  3: (57) r2 &= 4
  4: (17) r2 -= 16
  5: (0f) r2 += r10
  6: (18) r1 = 0xffff888111343a80
  8: (85) call bpf_map_lookup_elem#1
  invalid variable stack read R2 var_off=(0xfffffffffffffff0; 0x4)

Add support for variable offset access to check_stack_boundary so that
if offset is checked by program to be in a safe range it's accepted by
verifier.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Generate a libbpf.pc file at build time so that users can rely
on pkg-config to find the library, its CFLAGS and LDFLAGS.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

According to Amit Klein and Benny Pinkas, IP ID generation is too weak
and might be used by attackers.

Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix())
having 64bit key and Jenkins hash is risky.

It is time to switch to siphash and its 128bit keys.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The check for zero timeout is always true at the end of the proceeding
while loop; the only other exit path in the loop is if the unimac MDIO
is not busy.  Remove the redundant zero timeout check and always
return -ETIMEDOUT on this timeout return path.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My recent patch had at least three problems :

1) TX zerocopy wants notification when skb is acknowledged,
   thus we need to call skb_zcopy_clear() if the skb is
   cached into sk->sk_tx_skb_cache

2) Some applications might expect precise EPOLLOUT
   notifications, so we need to update sk->sk_wmem_queued
   and call sk_mem_uncharge() from sk_wmem_free_skb()
   in all cases. The SOCK_QUEUE_SHRUNK flag must also be set.

3) Reuse of saved skb should have used skb_cloned() instead
  of simply checking if the fast clone has been freed.

Fixes: 472c2e07 ("tcp: add one skb cache for tx")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a new action - 'check_pkt_len' which checks the
packet length and executes a set of actions if the packet
length is greater than the specified length or executes
another set of actions if the packet length is lesser or equal to.

This action takes below nlattrs
  * OVS_CHECK_PKT_LEN_ATTR_PKT_LEN - 'pkt_len' to check for

  * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER - Nested actions
    to apply if the packet length is greater than the specified 'pkt_len'

  * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL - Nested
    actions to apply if the packet length is lesser or equal to the
    specified 'pkt_len'.

The main use case for adding this action is to solve the packet
drops because of MTU mismatch in OVN virtual networking solution.
When a VM (which belongs to a logical switch of OVN) sends a packet
destined to go via the gateway router and if the nic which provides
external connectivity, has a lesser MTU, OVS drops the packet
if the packet length is greater than this MTU.

With the help of this action, OVN will check the packet length
and if it is greater than the MTU size, it will generate an
ICMP packet (type 3, code 4) and includes the next hop mtu in it
so that the sender can fragment the packets.

Reported-at:
https://mail.openvswitch.org/pipermail/ovs-discuss/2018-July/047039.htmlSuggested-by: Ben Pfaff <blp@ovn.org>
Signed-off-by: Numan Siddique <nusiddiq@redhat.com>
CC: Gregory Rose <gvrose8192@gmail.com>
CC: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
ethtool: add support for Fast Link Down as new PHY tunable

This adds support for Fast Link Down as new PHY tunable.
Fast Link Down reduces the time until a link down event is reported
for 1000BaseT. According to the standard it's 750ms what is too long
for several use cases.

This is the kernel-related series, the ethtool userspace extension
I'd submit once the kernel part has been applied.

v2:
- add describing comment in patch 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

1000BaseT standard requires that a link is reported as down earliest
after 750ms. Several use case however require a much faster detecion
of a broken link. Fast Link Down supports this by intentionally
violating a the standard. This patch exposes the Fast Link Down
feature of 88E1540 and 88E6390. These PHY's can be found as internal
PHY's in several switches: 88E6352, 88E6240, 88E6176, 88E6172,
and 88E6390(X). Fast Link Down and EEE are mutually exclusive.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for Fast Link Down as new PHY tunable.
Fast Link Down reduces the time until a link down event is reported
for 1000BaseT. According to the standard it's 750ms what is too long
for several use cases.

v2:
- add comment describing the constants
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of declaring a function in a .c file, declare it in a header
file and include that header file from the source files that define
and that use the function. That allows the compiler to verify
consistency of declaration and definition. See also commit
52267790 ("sock: add MSG_ZEROCOPY") # v4.14.

Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch avoids that the following warnings are reported when building
with W=1:

net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add'
net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add'
net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add'
net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add'
net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add'
net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add'
net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del'
net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del'
net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del'
net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del'
net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del'
net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump'
net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump'
net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump'
net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump'
net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump'

Cc: Hubert Sokolowski <hubert.sokolowski@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch avoids that the following warning is reported when building
with W=1:

warning: Function parameter or member 'flags' not described in '__skb_flow_dissect'

Cc: Tom Herbert <tom@herbertland.com>
Fixes: cd79a238 ("flow_dissector: Add flags argument to skb_flow_dissector functions") # v4.3.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch avoids that the following warnings are reported when building
with W=1:

net/core/dev_ioctl.c:378: warning: Function parameter or member 'ifr' not described in 'dev_ioctl'
net/core/dev_ioctl.c:378: warning: Function parameter or member 'need_copyout' not described in 'dev_ioctl'
net/core/dev_ioctl.c:378: warning: Excess function parameter 'arg' description in 'dev_ioctl'

Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 44c02a2c ("dev_ioctl(): move copyin/copyout to callers") # v4.16.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch avoids that the following warning is reported when building
with W=1:

warning: Function parameter or member 'bind_inany' not described in 'reuseport_add_sock'

Cc: Martin KaFai Lau <kafai@fb.com>
Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") # v4.19.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This partially reverts ed8fe202 ("net: dsa: mv88e6xxx: prevent
interrupt storm caused by mv88e6390x_port_set_cmode"). I missed
that chip->ports[].cmode is overwritten anyway by the cmode
caching in mv88e6xxx_setup().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8fcf0ec44c11f "bnx2x: Add FW 7.13.11.0" added said .bin FW to
linux-firmware; This patch incorporates the FW in the bnx2x driver.
This introduces few FW fixes and the support for Tx VLAN filtering.

Please consider applying it to 'net-next' tree.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An FoU socket is currently bound to the wildcard-address. While this
works fine, there are several use-cases where the use of the
wildcard-address is not desirable. For example, I use FoU on some
multi-homed servers and would like to use FoU on only one of the
interfaces.

This commit adds support for binding FoU sockets to a given source
address/interface, as well as connecting the socket to a given
destination address/port. udp_tunnel already provides the required
infrastructure, so most of the code added is for exposing and setting
the different attributes (local address, peer address, etc.).

The lookups performed when we add, delete or get an FoU-socket has also
been updated to compare all the attributes a user can set. Since the
comparison now involves several elements, I have added a separate
comparison-function instead of open-coding.

In order to test the code and ensure that the new comparison code works
correctly, I started by creating a wildcard socket bound to port 1234 on
my machine. I then tried to create a non-wildcarded socket bound to the
same port, as well as fetching and deleting the socket (including source
address, peer address or interface index in the netlink request).  Both
the create, fetch and delete request failed. Deleting/fetching the
socket was only successful when my netlink request attributes matched
those used to create the socket.

I then repeated the tests, but with a socket bound to a local ip
address, a socket bound to a local address + interface, and a bound
socket that was also «connected» to a peer. Add only worked when no
socket with the matching source address/interface (or wildcard) existed,
while fetch/delete was only successful when all attributes matched.

In addition to testing that the new code work, I also checked that the
current behavior is kept. If none of the new attributes are provided,
then an FoU-socket is configured as before (i.e., wildcarded).  If any
of the new attributes are provided, the FoU-socket is configured as
expected.

v1->v2:
* Fixed building with IPv6 disabled (kbuild).
* Fixed a return type warning and make the ugly comparison function more
readable (kbuild).
* Describe more in detail what has been tested (thanks David Miller).
* Make peer port required if peer address is specified.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-03-26

This series contains more updates to the ice driver only.

Jeremiah provides his first patch to the Linux kernel to clean up
un-necessary newlines in driver log messages.

Mitch updates the ice driver to use existing status codes in the iavf
driver so that when errors occur, it will not report nonsensical
results.  Adds support for VF admin queue interrupts by programming the
VPINT_MBX_CTL register array.

Brett adds a check for a bit that we set while preparing for a reset, to
ensure we are prepared to do a proper reset.  Also implemented PCI error
handling operations.  Went through and audited the hot path with pahole
and made modifications based on the results since 2 structures were
taking up more space than necessary due to cache alignment issues.
Fixed an issue where when flow control was disabled, the state of flow
control was being displayed as "Unknown".

Anirudh fixes adaptive interrupt moderation changes by adding code that
was missed, that should have been added in the initial patch to add that
support.  Cleaned up a function prototype that was never implemented.
Did additional code cleanup by removing unneeded braces and redundant
code comments.

Akeem fixes an issue that occurs when the VF is attempting to remove the
default LAN/MAC address, which is programmed by the administrator by
updating the error message to explicitly say that the VF cannot change
the MAC programmed by the PF.

Preethi fixes the driver to not fall into the error path when a added
filter already exists, but instead continue to process the rest of the
function and add appropriate checks after adding MAC filters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Maxime Chevallier says:

====================
net: mvpp2: Classifier updates and cleanups

In preparation for the future addition of classification offload
support, this series cleans-up the current code dealing with the
classification engines.

As of today, the classification code only deals with RSS, which is a
very narrow use-case when considering all of the classifier's features.

This lead to design and naming decisions that don't really stand when
considering using more classification features.

This series therefore includes quite a lot a renaming of functions and
macros, and tries to make the naming schemes more consistent and the
code more readable.

The debugfs interface that allows reading the various Parsing and
Classification engines has been cleaned-up and made more generic,
allowing to read the Flow Table and C2 engine hit counters on a
per-entry basis.

The Classifier itself has been made more robust by introducing the
lu_type field in classification lookups, that prevents false-positive
matches in the future. We also initialise the various engine in a more
extensive and less error-prone way by assining default values to all
entries in the C2 and Flow table.

This is a pretty big series considering it's mostly cleanup, but my goal
is to make the future series that will contain new big features easier
to review, focusing on the real logic.

Besides the debugfs interface, this series doesn't intend to introduce any
new features or change in behaviours.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The C2 classification engine has a 256 entry TCAM, used for ternary
matches on an 8 byte Header Extracted Key. For now, we compute the
various indices for classification and RSS that use this engine thanks
to a set of macros.

This commit mainly renames the macros used to make it clear that they
should be used with the C2 engine, but also make use of the full 256
entries in the engine. For now, the C2 entries are only used for RSS.

These entries are put at the end of the TCAM range, in case we want to
add higher priority matches later on.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When classifying a packet pertaining to a given flow, the classifier
will issue multiple lookup commands until it finds one with the 'last'
bit set. It expects all prorities to be assign continuously (although
not necessarily in an ordered fashion) from 0 to the number of lookups.

We can initialize this once, and make sure unused lookups are given an
empty port map. This avoids having to maintain priorities and the
information of which lookup is the last.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

C2 TCAM entries can be invalidated to avoid unwanted matches. Make sure
all entries are invalidated at init, then validate only the ones we use.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Flow Table dictates what lookups will be issued for each flow type.
The lookup sequence for each flow is similar, and the index of each
lookup is computed by some macros.

There are similar mechanisms for the C2 TCAM lookups, so in order to
avoid confusion, rename the flow table index computing macros with a
common prefix.

The only difference in behaviour is that we now use the very first entry
in the flow for the RSS lookup (the first entry was previously unused).
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>