- 17 Dec, 2023 17 commits
-
-
Vignesh Raghavendra authored
Call runtime_pm_put*() if watchdog is not already started during probe and re enable it in watchdog start as required. On K3 SoCs, watchdogs and their corresponding CPUs are under same power-domain, so if the reference count of unused watchdogs aren't dropped, it will lead to CPU hotplug failures as Device Management firmware won't allow to turn off the power-domain due to dangling reference count. Fixes: 2d63908b ("watchdog: Add K3 RTI watchdog support") Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Tested-by:
Manorit Chawdhry <m-chawdhry@ti.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.comSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Ben Dooks authored
Add the necessary __acquires() and __releases() to the functions that take and release the wdt lock to avoid the following sparse warnings: drivers/watchdog/starfive-wdt.c:204:13: warning: context imbalance in 'starfive_wdt_unlock' - wrong count at exit drivers/watchdog/starfive-wdt.c:212:9: warning: context imbalance in 'starfive_wdt_lock' - unexpected unlock Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by:
-
Daniel Golle authored
Add support for watchdog and reset generator unit of the MediaTek MT7988 SoC. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
-
Daniel Golle authored
Add binding description for mediatek,mt7988-wdt. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
Nik Bune authored
Convert txt file to yaml. Add maintainers from git blame. Signed-off-by:
Nik Bune <n2h9z4@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Stefan Wahren authored
Users report about the unexpected behavior for setting timeouts above 15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations. But looking at the code shows that max_timeout based on the register value PM_WDOG_TIME_SET, which is the maximum. Since 664a3923 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") the watchdog core is able to handle this problem. This fix has been tested with watchdog-test from selftests. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374 Fixes: 664a3923 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
-
Jerry Hoemann authored
Remove the unused variable ilo5. Signed-off-by:
Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by:
-
Jerry Hoemann authored
ProLiants of vintage to have an iLO 5, no longer send watchdog NMI as an IO CHECK. They are presented to hpwdt_pretimeout as NMI_UNKNOWN. The preceding if statement rejects if !mynmi irrespective of value of pretimeout making this if statement redundant. Signed-off-by:
-
Jerry Hoemann authored
Avoid unnecessary crashes by claiming only NMIs that are due to ERROR signalling or generated by the hpwdt hardware device. The code does this, but only for iLO5. The intent was to preserve legacy, Gen9 and earlier, semantics of using hpwdt for error containtment as hardware/firmware would signal fatal IO errors as an NMI with the expectation of hpwdt crashing the system. Howerver, these IO errors should be received by hpwdt as an NMI_IO_CHECK. So the test is overly permissive and should not be limited to only ilo5. We need to enable this protection for future iLOs not matching the current PCI IDs. Fixes: 62290a5c ("watchdog: hpwdt: Claim NMIs generated by iLO5") Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
-
Uwe Kleine-König authored
On today's platforms the benefit of platform_driver_probe() isn't that relevant any more. It allows to drop some code after booting (or module loading) for .probe() and discard the .remove() function completely if the driver is built-in. This typically saves a few 100k. The downside of platform_driver_probe() is that the driver cannot be bound and unbound at runtime which is ancient and also slightly complicates testing. There are also thoughts to deprecate platform_driver_probe() because it adds some complexity in the driver core for little gain. Also many drivers don't use it correctly. This driver for example misses to mark the driver struct with __refdata which is needed to suppress a (W=1) modpost warning: WARNING: modpost: drivers/watchdog/txx9wdt: section mismatch in reference: txx9wdt_driver+0x4 (section: .data) -> txx9wdt_remove (section: .exit.text) Signed-off-by:
-
Uwe Kleine-König authored
On today's platforms the benefit of platform_driver_probe() isn't that relevant any more. It allows to drop some code after booting (or module loading) for .probe() and discard the .remove() function completely if the driver is built-in. This typically saves a few 100k. The downside of platform_driver_probe() is that the driver cannot be bound and unbound at runtime which is ancient and also slightly complicates testing. There are also thoughts to deprecate platform_driver_probe() because it adds some complexity in the driver core for little gain. Also many drivers don't use it correctly. This driver for example misses to mark the driver struct with __refdata which is needed to suppress a (W=1) modpost warning: WARNING: modpost: drivers/watchdog/at91sam9_wdt: section mismatch in reference: at91wdt_driver+0x4 (section: .data) -> at91wdt_remove (section: .exit.text) Signed-off-by:
-
Lukas Bulwahn authored
Commit bd888a43 ("dt-bindings: watchdog: da9062-wdt: convert txt to yaml") converts da9062-wdt.txt to dlg,da9062-watchdog.yaml, but misses to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file pattern in DIALOG SEMICONDUCTOR DRIVERS. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
-
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Update the example in the bindings. Fixes: 7c631cdf ("dt-bindings: watchdog: qcom-wdt: allow interrupts") Signed-off-by:Douglas Anderson <dianders@chromium.org> Acked-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Curtis Klein authored
When the new watchdog character device is registered, it becomes available for opening. This creates a race where userspace may open the device before the character device's owner is set. This results in an imbalance in module_get calls as the cdev_get in cdev_open will not increment the reference count on the watchdog driver module. This causes problems when the watchdog character device is released as the module loader's reference will also be released. This makes it impossible to open the watchdog device later on as it now appears that the module is being unloaded. The open will fail with -ENXIO from chrdev_open. The legacy watchdog device will fail with -EBUSY from the try_module_get in watchdog_open because it's module owner is the watchdog core module so it can still be opened but it will fail to get a refcount on the underlying watchdog device driver. Fixes: 72139dfa ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Signed-off-by:
Curtis Klein <curtis.klein@hpe.com> Reviewed-by:
-
- 13 Nov, 2023 1 commit
-
-
Linus Torvalds authored
-
- 12 Nov, 2023 5 commits
-
-
Miri Korenblit authored
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by:
Damian Tometzki <damian@riscv-rocks.de> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
-
Linus Torvalds authored
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - ctime caching fix (for setxattr) - encryption fix - DNS resolver mount fix - debugging improvements - multichannel fixes including cases where server stops or starts supporting multichannel after mount - reconnect fix - minor cleanups * tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: handle when server stops supporting multichannel cifs: handle when server starts supporting multichannel Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO smb3: allow dumping session and tcon id to improve stats analysis and debugging smb: client: fix mount when dns_resolver key is not available smb3: fix caching of ctime on setxattr smb3: minor cleanup of session handling code cifs: reconnect work should have reference on server struct cifs: do not pass cifs_sb when trying to add channels cifs: account for primary channel in the interface list cifs: distribute channels across interfaces based on speed cifs: handle cases where a channel is closed smb3: more minor cleanups for session handling routines smb3: minor RDMA cleanup cifs: Fix encryption of cleared, but unset rq_iter data buffers
-
- 11 Nov, 2023 1 commit
-
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
-
- 10 Nov, 2023 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes and cleanups from Helge Deller: - fix double free and resource leaks in imsttfb - lots of remove callback cleanups and section mismatch fixes in omapfb, amifb and atmel_lcdfb - error code fix and memparse simplification in omapfb * tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits) fbdev: fsl-diu-fb: mark wr_reg_wa() static fbdev: amifb: Convert to platform remove callback returning void fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning fbdev: hyperv_fb: fix uninitialized local variable use fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void fbdev: omapfb/tfp410: Convert to platform remove callback returning void fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void fbdev: omapfb/opa362: Convert to platform remove callback returning void fbdev: omapfb/hdmi: Convert to platform remove callback returning void fbdev: omapfb/dvi: Convert to platform remove callback returning void fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void fbdev: omapfb/dpi: Convert to platform remove callback returning void fbdev: omapfb/analog-tv: Convert to platform remove callback returning void fbdev: atmel_lcdfb: Convert to platform remove callback returning void fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs ...
-
Yujie Liu authored
The order of descriptions should be consistent with the argument list of the function, so "kretprobe" should be the second one. int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe, const char *name, const char *loc, ...) Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/ Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions") Suggested-by:Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by:
Yujie Liu <yujie.liu@intel.com> Reviewed-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: "Dave's VPN to the big machine died, so it's on me to do fixes pr this and next week while everyone else is at plumbers. - big pile of amd fixes, but mostly for hw support newly added in 6.7 - i915 fixes, mostly minor things - qxl memory leak fix - vc4 uaf fix in mock helpers - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE" * tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits) drm/amdgpu: fix error handling in amdgpu_vm_init drm/amdgpu: Fix possible null pointer dereference drm/amdgpu: move UVD and VCE sched entity init after sched init drm/amdgpu: move kfd_resume before the ip late init drm/amd: Explicitly check for GFXOFF to be enabled for s0ix drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2) drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5) drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support drm/amdgpu: fix software pci_unplug on some chips drm/amd/display: remove duplicated argument drm/amdgpu: correct mca debugfs dump reg list drm/amdgpu: correct acclerator check architecutre dump drm/amdgpu: add pcs xgmi v6.4.0 ras support drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3 drm/amdgpu: disable smu v13.0.6 mca debug mode by default drm/amdgpu: Support multiple error query modes drm/amdgpu: refine smu v13.0.6 mca dump driver drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2) drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV drm: amd: Resolve Sphinx unexpected indentation warning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken MediaTek firmware: - Move the MediaTek GIC quirk handling from irqchip to core. Before the merging window commit 44bd78dd ("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware issues") temporarily addressed this issue. Fixed now at a deeper level in the arch code - Reject events meant for other PMUs in the CoreSight PMU driver, otherwise some of the core PMU events would disappear - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers, causing some events to be invisible - Remove duplicate declaration of __arm64_sys##name following the patch to avoid prototype warning for syscalls - Typos in the elf_hwcap documentation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/syscall: Remove duplicate declaration Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW" arm64: Move MediaTek GIC quirk handling from irqchip to core arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers perf: arm_cspmu: Reject events meant for other PMUs Documentation/arm64: Fix typos in elf_hwcaps -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of fixes for rc1. The majority of changes are various ASoC driver-specific small fixes and usual HD-audio quirks, while there are a couple of core changes: a fix in ALSA core procfs code to avoid deadlocks at disconnection and an ASoC core fix for DAPM clock widgets" * tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: OSS: dmasound/paula: Convert to platform remove callback returning void ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus ALSA: info: Fix potential deadlock at disconnection ASoC: nau8540: Add self recovery to improve capture quility ALSA: hda/realtek: Add support dual speaker for Dell ALSA: hda: Add ASRock X670E Taichi to denylist ALSA: hda/realtek: Add quirk for ASUS UX7602ZM ASoC: SOF: sof-client: trivial: fix comment typo ASoC: dapm: fix clock get name ASoC: hdmi-codec: register hpd callback on component probe ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages ASoC: da7219: Improve system suspend and resume handling ASoC: codecs: Modify macro value error ASoC: codecs: Modify the wrong judgment of re value ASoC: codecs: Modify the maximum value of calib ASoC: amd: acp: fix for i2s mode register field update ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb() ASoC: rt712-sdca: fix speaker route missing issue ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
-
https://gitlab.freedesktop.org/agd5f/linuxDaniel Vetter authored
amd-drm-next-6.7-2023-11-10: amdgpu: - SR-IOV fixes - DMCUB fixes - DCN3.5 fixes - DP2 fixes - SubVP fixes - SMU14 fixes - SDMA4.x fixes - Suspend/resume fixes - AGP regression fix - UAF fixes for some error cases - SMU 13.0.6 fixes - Documentation fixes - RAS fixes - Hotplug fixes - Scheduling entity ordering fix - GPUVM fixes Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A couple of fixes that came in during the merge window: one Kconfig dependency fix and another fix for a long standing issue where a sync transfer races with system suspend" * tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix null dereference on suspend spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix broken cache-flush support for Micron eMMCs - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards' MMC host: - sdhci_am654: Fix TAP value parsing for legacy speed mode - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750 - vub300: Fix an error path in probe" * tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER Revert "mmc: core: Capture correct oemid-bits for eMMC cards" mmc: vub300: fix an error code mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A mmc: sdhci_am654: fix start loop index for TAP value parsing
-
Linus Torvalds authored
Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "This contains two very small fixes that I failed to include in the main pull request" * tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix double shift bug pwm: samsung: Fix a bit test in pwm_samsung_resume()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Mostly just a few fixes and cleanups caused by the read multishot support. Outside of that, a stable fix for how a connect retry is done" * tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux: io_uring: do not clamp read length for multishot read io_uring: do not allow multishot read to set addr or len io_uring: indicate if io_kbuf_recycle did recycle anything io_uring/rw: add separate prep handler for fixed read/write io_uring/rw: add separate prep handler for readv/writev io_uring/net: ensure socket is marked connected on connect retry io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - nvme keyring config compile fixes (Hannes and Arnd) - fabrics keep alive fixes (Hannes) - tcp authentication fixes (Mark) - io_uring_cmd error handling fix (Anuj) - stale firmware attribute fix (Daniel) - tcp memory leak (Christophe) - crypto library usage simplification (Eric) - nbd use-after-free fix. May need a followup, but at least it's better than what it was before (Li) - Rate limit write on read-only device warnings (Yu) * tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux: nvme: keyring: fix conditional compilation nvme: common: make keyring and auth separate modules blk-core: use pr_warn_ratelimited() in bio_check_ro() nbd: fix uaf in nbd_open nvme: start keep-alive after admin queue setup nvme-loop: always quiesce and cancel commands before destroying admin q nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue() nvme-auth: always set valid seq_num in dhchap reply nvme-auth: add flag for bi-directional auth nvme-auth: auth success1 msg always includes resp nvme: fix error-handling for io_uring nvme-passthrough nvme: update firmware version after commit nvme-tcp: Fix a memory leak nvme-auth: use crypto_shash_tfm_digest() -
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fixes from Damien Le Moal: - Revert a change in ata_pci_shutdown_one() to suspend disks on shutdown as this is now done using the manage_shutdown scsi device flag (me) - Change the pata_falcon and pata_gayle drivers to stop using module_platform_driver_probe(). This makes these drivers more inline with all other drivers (allowing bind/unbind) and suppress a compilation warning (Uwe) - Convert the pata_falcon and pata_gayle drivers to the new .remove_new() void-return callback. These 2 drivers are the last ones needing this change (Uwe) * tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_gayle: Convert to platform remove callback returning void ata: pata_falcon: Convert to platform remove callback returning void ata: pata_gayle: Stop using module_platform_driver_probe() ata: pata_falcon: Stop using module_platform_driver_probe() ata: libata-core: Fix ata_pci_shutdown_one()
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - don't leave pages decrypted for DMA in encrypted memory setups linger around on failure (Petr Tesarik) - fix an out of bounds access in the new dynamic swiotlb code (Petr Tesarik) - fix dma_addressing_limited for systems with weird physical memory layouts (Jia He) * tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM dma-mapping: move dma_addressing_limited() out of line swiotlb: do not free decrypted pages if dynamic
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsmLinus Torvalds authored
Pull lsm updates from Paul Moore: "We've got two small patches to correct the default return value of two LSM hooks: security_vm_enough_memory_mm() and security_inode_getsecctx()" * tag 'lsm-pr-20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lsm: fix default return value for inode_getsecctx lsm: fix default return value for vm_enough_memory
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: - slab out of bounds fix in ACL handling - fix malformed request oops - minor doc fix * tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd: ksmbd: handle malformed smb1 message ksmbd: fix kernel-doc comment of ksmbd_vfs_kern_path_locked() ksmbd: fix slab out of bounds write in smb_inherit_dacl()
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: - support for idmapped mounts in CephFS (Christian Brauner, Alexander Mikhalitsyn). The series was originally developed by Christian and later picked up and brought over the finish line by Alexander, who also contributed an enabler on the MDS side (separate owner_{u,g}id fields on the wire). The required exports for mnt_idmap_{get,put}() in VFS have been acked by Christian and received no objection from Christoph. - a churny change in CephFS logging to include cluster and client identifiers in log and debug messages (Xiubo Li). This would help in scenarios with dozens of CephFS mounts on the same node which are getting increasingly common, especially in the Kubernetes world. * tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client: ceph: allow idmapped mounts ceph: allow idmapped atomic_open inode op ceph: allow idmapped set_acl inode op ceph: allow idmapped setattr inode op ceph: pass idmap to __ceph_setattr ceph: allow idmapped permission inode op ceph: allow idmapped getattr inode op ceph: pass an idmapping to mknod/symlink/mkdir ceph: add enable_unsafe_idmap module parameter ceph: handle idmapped mounts in create_request_message() ceph: stash idmapping in mdsc request fs: export mnt_idmap_get/mnt_idmap_put libceph, ceph: move mdsmap.h to fs/ceph ceph: print cluster fsid and client global_id in all debug logs ceph: rename _to_client() to _to_fs_client() ceph: pass the mdsc to several helpers libceph: add doutc and *_client debug macros support
-
