- 21 Aug, 2012 2 commits
-
-
Chris Wilson authored
A pair of universally true checks that just need to be put in the right place depending on where in the patch sequence you go. Note that i915_gem_object_put_pages_gtt() already gains the BUG_ON(obj->gtt_space), but on reflection that needed to migrate to put_pages(). Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by:
-
- 20 Aug, 2012 1 commit
-
-
Daniel Vetter authored
Prep work to make Chris Wilson's unbound tracking patch a bit easier to read. Alas, I'd have preferred that moving the page allocation retry loop from bind to get_pages would have been a separate patch, too. But that looks like real work ;-) Signed-off-by:
-
- 17 Aug, 2012 19 commits
-
-
Wang Xingchao authored
Added new haswell_write_eld() to initialize Haswell HDMI audio registers to generate an unsolicited response to the audio controller driver to indicate that the controller sequence should start. Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Wang Xingchao <xingchao.wang@intel.com> Signed-off-by:
-
Dave Airlie authored
We need to call these before we transfer the damaged areas to the device not before/after we setup the long lived vmaps. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
In order for udl vmap to work properly, we need to push the object into the CPU domain before we start copying the data to the USB device. This along with the udl change avoids userspace explicit mapping to be used. v2: add a flag for userspace to query to know if Intel kernel driver can deal with the vmap flushing properly. In theory udl would need a flag also, but I intend to push the patches very close to each other and other drivers should do the right thing from the start. I've added a test to my intel-gpu-tools prime branch, however testing this is a bit messy since the only way to get udl to vmap is to rendering something. I've tested this with real code as well to make sure it works. Signed-off-by:
-
Keith Packard authored
This is left over from the old PLL sharing code and isn't useful now that PLLs are shared when possible. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Damien Lespiau authored
New-ish devices have 3 pipes, so let's not just hardcode 2 but use the for_each_pipe() macro and make struct intel_display_error_state is big enough. V2: Also add the number of pipes emitted (Chris Wilson) Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
-
Daniel Vetter authored
Yet again the too close relationship between the fb helper and the crtc helper code strikes. This time around the fb helper resets all encoder->crtc pointers to NULL before starting to set up it's own mode. Which is total bullocks, because this will clobber the existing output routing, which the new drm/i915 code depends upon to be absolutely correct. The crtc helper itself doesn't really care about that, since it disables unused encoders in a rather roundabout way anyway. Two places call drm_setup_crts: - For the initial fb config. I've auditted all current drivers, and they all allocate their encoders with kzalloc. So there's no need to clear encoder->crtc once more. - When processing hotplug events while showing the fb console. This one is a bit more tricky, but both the crtc helper code and the new drm/i915 modeset code disable encoders if their crtc is changed and that encoder isn't part of the new config. Also, both disable any disconnected outputs, too. Which only leaves encoders that are on, connected, but for some odd reason the fb helper code doesn't want to use. That would be a bug in the fb configuration selector, since it tries to light up as many outputs as possible. v2: Kill the now unused encoders variable. Acked-by:
Dave Airlie <airlied@gmail.com> Signed-Off-by:
-
Wang Xingchao authored
Use _PIPE macro to get correct register definition for IBX/CPT, discard old variable "i" way. Signed-off-by:
-
Wang Xingchao authored
HDMI audio related registers will be configured in write_eld callback. Signed-off-by:
-
Wang Xingchao authored
Add hsw audio registers definition Signed-off-by:
-
Daniel Vetter authored
Simply to make the ilk+ crtc disable path clearer and more symmetric with the enable function. Also switch to intel_crtc for the enable function. Reviewed-by:
-
Daniel Vetter authored
... and move a few others only used by i915_dma.c into the dri1 dungeon. Reviewed-by:
-
Daniel Vetter authored
All dvo drivers only support 2 dpms states, and our dvo driver even switches of the dvo port for anything else than DPMS_ON. Hence ditch this complexity and simply use bool enable. While reading through this code I've noticed that the mode_set function of ch7017 is a bit peculiar - it disable the lvds again, even though the crtc helper code should have done that ... This might be to work around an issue at driver load, we pretty much ignore the hw state when taking over. v2: Also do the conversion for the new ns2501 driver. Reviewed-by:
-
Daniel Vetter authored
Since it's redundant - we can get the attached encoder in the functions themselves. Reviewed-by:
-
Daniel Vetter authored
A few things need adjustement: - Change the dpms state by calling the dpms connector function and not some crtc helper internal callbacks. Otherwise this will break once we switch to our own dpms handling. - Instead of tracking and restoring intel_crtc->dpms_mode use the connector's dpms variable - the former relies on the dpms compuation rules used by the crtc helper. And it would break when the encoder is cloned and the other output has a different dpms state. But luckily no one is crazy enough for that. - Properly clear the connector -> encoder -> crtc linking, even when failing (note that the crtc helper removes the encoder -> crtc link in disabled_unused_functions for us). Reviewed-by:
-
Daniel Vetter authored
Now that all affected i830M systems have the pipe A quirk set, we don't need to do any special dances in the overlay code any longer. And reading through the code I'm rather dubios that it actually does what it claims to do ... As a nice benefit this rips out a users of the crtc helper dpms callback. v2: As suggested by Chris Wilson, replace the code by an appropriate WARN to ensure that the pipe A is indeed running. Reviewed-by:
-
Daniel Vetter authored
With the pipe A quirk properly fixed up for i830M, this shouldn't be required any longer. Reviewed-by:
-
Daniel Vetter authored
For some odd reason we've missed i830 and a i855 variant. Also kill the two now redundant i830 entries. v2: Don't add the missing 855 id to the pipe A quirk list, we seem to lack justification for it. Reviewed-by:
-
Xu, Anhua authored
Wrong order of parameters passed-in when calling hdmi/adpa /lvds_pipe_enabled(), 2nd and 3rd parameters are reversed. This bug was indroduced by commit 1519b995 Author: Keith Packard <keithp@keithp.com> Date: Sat Aug 6 10:35:34 2011 -0700 drm/i915: Fix PCH port pipe select in CPT disable paths The reachable tag for this commit is v3.1-rc1-3-g1519b995Signed-off-by:
Anhua Xu <anhua.xu@intel.com> Reviewed-by:
-
Daniel Vetter authored
Backmerge Linux 3.6-rc2 to resolve a few funny conflicts before we put even more madness on top: - drivers/gpu/drm/i915/i915_irq.c: Just a spurious WARN removed in -fixes, that has been changed in a variable-rename in -next, too. - drivers/gpu/drm/i915/intel_ringbuffer.c: -next remove scratch_addr (since all their users have been extracted in another fucntion), -fixes added another user for a hw workaroudn. Signed-off-by:
-
- 16 Aug, 2012 11 commits
-
-
Linus Torvalds authored
-
Ian Kent authored
Following a report of a crash during an automount expire I found that the locking in fs/autofs4/expire.c:get_next_positive_subdir() was wrong. Not only is the locking wrong but the function is more complex than it needs to be. The function is meant to calculate (and dget) the next entry in the list of directories contained in the root of an autofs mount point (an autofs indirect mount to be precise). The main problem was that the d_lock of the owner of the list was not being taken when walking the list, which lead to list corruption under load. The only other lock that needs to be taken is against the next dentry candidate so it can be checked for usability. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fix from Alex Williamson: "Just a trivial patch to include vfio.h in the installed headers so we can complete userspace integration into QEMU." * tag 'vfio-for-v3.6-rc1' of git://github.com/awilliam/linux-vfio: vfio: Include vfio.h in installed headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: verify all ioctl retry iov elements fuse: add missing INIT flag descriptions fuse: add missing INIT flags fuse: update attributes on aio_read fuse: invalidate inode mapping if mtime changes fuse: add FUSE_AUTO_INVAL_DATA init flag
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fix from Konrad Rzeszutek Wilk: "Way back in v3.5 we added a mechanism to populate back pages that were released (they overlapped with MMIO regions), but neglected to reserve the proper amount of virtual space for extend_brk to work properly. Coincidentally some other commit aligned the _brk space to larger area so I didn't trigger this until it was run on a machine with more than 2GB of MMIO space." * On machines with large MMIO/PCI E820 spaces we fail to boot b/c we failed to pre-allocate large enough virtual space for extend_brk. * tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: intc: Handle domain association for sparseirq pre-allocated vectors. sh: sh7269: Fix LCD pinmux sh: dma: fix request_irq usage
-
Dan Williams authored
Moved to djbw@fb.com Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by:
Dan Williams <djbw@fb.com> Signed-off-by:
-
Borislav Petkov authored
When dumping "Code: " sections from an oops, the trapping instruction %rip points to can be a string copy 2b:* f3 a5 rep movsl %ds:(%rsi),%es:(%rdi) and the line contain a bunch of ":". Current "cut" selects only the and the second field output looks funnily overlaid this: 2b:* f3 a5 rep movsl %ds <-- trapping instruction:(%rsi),%es:(%rdi Fix this by selecting the remaining fields too. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kbuild@vger.kernel.org Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull two slave-dmaengine fixes from Vinod Koul: "One fixes the correct use of clock API in imx driver and the other enables clock for tegra driver, which is used for other tegra driver conversion to dmanegine in -next." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: enable/disable dma clock dma: imx-dma: Fix kernel crash due to missing clock conversion
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull more drm fixes from Dave Airlie: "Just some intel and nouveau ones this time, intel has more edp panel fixes for macbooks and nouveau has a suspend/resume regression fix in there." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid drm/nve0/fifo: add support for the flip completion swmthd
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull two sparc fixes from David S. Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Be less verbose during vmemmap population. sparc64: do not clobber personality flags in sys_sparc64_personality()
-
- 15 Aug, 2012 3 commits
-
-
git://git.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
-
David S. Miller authored
On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2e (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 14 Aug, 2012 4 commits
-
-
Chris Wilson authored
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322Acked-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Daniel Vetter authored
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671Tested-by:
Roberto Romer <sildurin@gmail.com> Tested-by:
Daniel Wagner <wagi@monom.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
-
