Since we are not doing anything fancy in remove function that requires
us to sequence IRQ free operation, we might as well switch over to devm_
equivalent of managed IRQ allocation and remove the explicit free_irq
since it'd be done automatically at remove.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

The driver currently emulates the concept of threaded IRQ using a
workqueue, which it really does not need to. Instead, switch over to
threaded_irq handlers which is meant precisely for the same purpose.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm for 4.3.  Nouveau is
  probably the biggest amount of changes in here, since it missed 4.2.
  Highlights below, along with the usual bunch of fixes.

  All stuff outside drm should have applicable acks.

  Highlights:

   - new drivers:
        freescale dcu kms driver

   - core:
        more atomic fixes
        disable some dri1 interfaces on kms drivers
        drop fb panic handling, this was just getting more broken, as more locking was required.
        new core fbdev Kconfig support - instead of each driver enable/disabling it
        struct_mutex cleanups

   - panel:
        more new panels
        cleanup Kconfig

   - i915:
        Skylake support enabled by default
        legacy modesetting using atomic infrastructure
        Skylake fixes
        GEN9 workarounds

   - amdgpu:
        Fiji support
        CGS support for amdgpu
        Initial GPU scheduler - off by default
        Lots of bug fixes and optimisations.

   - radeon:
        DP fixes
        misc fixes

   - amdkfd:
        Add Carrizo support for amdkfd using amdgpu.

   - nouveau:
        long pending cleanup to complete driver,
        fully bisectable which makes it larger,
        perfmon work
        more reclocking improvements
        maxwell displayport fixes

   - vmwgfx:
        new DX device support, supports OpenGL 3.3
        screen targets support

   - mgag200:
        G200eW support
        G200e new revision support

   - msm:
        dragonboard 410c support, msm8x94 support, msm8x74v1 support
        yuv format support
        dma plane support
        mdp5 rotation
        initial hdcp

   - sti:
        atomic support

   - exynos:
        lots of cleanups
        atomic modesetting/pageflipping support
        render node support

   - tegra:
        tegra210 support (dc, dsi, dp/hdmi)
        dpms with atomic modesetting support

   - atmel:
        support for 3 more atmel SoCs
        new input formats, PRIME support.

   - dwhdmi:
        preparing to add audio support

   - rockchip:
        yuv plane support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
  drm/amdgpu: rename gmc_v8_0_init_compute_vmid
  drm/amdgpu: fix vce3 instance handling
  drm/amdgpu: remove ib test for the second VCE Ring
  drm/amdgpu: properly enable VM fault interrupts
  drm/amdgpu: fix warning in scheduler
  drm/amdgpu: fix buffer placement under memory pressure
  drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
  drm/amdgpu: fix typo in dce11 watermark setup
  drm/amdgpu: fix typo in dce10 watermark setup
  drm/amdgpu: use top down allocation for non-CPU accessible vram
  drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
  drm/amdgpu: set MEC doorbell range for Fiji
  drm/amdgpu: implement burst NOP for SDMA
  drm/amdgpu: add insert_nop ring func and default implementation
  drm/amdgpu: add amdgpu_get_sdma_instance helper function
  drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
  drm/amdgpu: add burst_nop flag for sdma
  drm/amdgpu: add count field for the SDMA NOP packet v2
  drm/amdgpu: use PT for VM sync on unmap
  drm/amdgpu: make wait_event uninterruptible in push_job
  ...

A few more fixes for amdgpu from the last few days:
- Fix several copy paste typos
- Resume from suspend fixes for VCE
- Fix the GPU scheduler warning in kfifo_out
- Re-enable GPUVM fault interrupts which were inadvertently disabled
- GPUVM page table hang fix when paging

* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: rename gmc_v8_0_init_compute_vmid
  drm/amdgpu: fix vce3 instance handling
  drm/amdgpu: remove ib test for the second VCE Ring
  drm/amdgpu: properly enable VM fault interrupts
  drm/amdgpu: fix warning in scheduler
  drm/amdgpu: fix buffer placement under memory pressure
  drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
  drm/amdgpu: fix typo in dce11 watermark setup
  drm/amdgpu: fix typo in dce10 watermark setup
  drm/amdgpu: use top down allocation for non-CPU accessible vram
  drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)

It should be gfx_v8_0_init_compute_vmid since it's
part of the gfx block.
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to properly handle the instances for the idle
checks and soft reset.
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

it seems the VCE ring 1 ib test not reliable, remove it for now.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-and-Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>

This fixes not printing VM faults.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Pull input subsystem updates from Dmitry Torokhov:
 "Drivers, drivers, drivers...  No interesting input core changes this
  time"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits)
  Input: elan_i2c - use iap_version to get firmware information
  Input: max8997_haptic - fix module alias
  Input: elan_i2c - fix typos for validpage_count
  Input: psmouse - add small delay for IBM trackpoint pass-through mode
  Input: synaptics - fix handling of disabling gesture mode
  Input: elan_i2c - enable ELAN0100 acpi panels
  Input: gpio-keys - report error when disabling unsupported key
  Input: sur40 - fix error return code
  Input: sentelic - silence some underflow warnings
  Input: zhenhua - switch to using bitrev8()
  Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency
  Input: cap11xx - add LED support
  Input: elants_i2c - fix for devm_gpiod_get API change
  Input: elan_i2c - enable asynchronous probing
  Input: elants_i2c - enable asynchronous probing
  Input: elants_i2c - wire up regulator support
  Input: do not emit unneeded EV_SYN when suspending
  Input: elants_i2c - disable idle mode before updating firmware
  MAINTAINERS: Add maintainer for atmel_mxt_ts
  Input: atmel_mxt_ts - remove warning on zero T44 count
  ...

Pull sound updates from Takashi Iwai:
 "There are little changes in core part, but lots of development are
  found in drivers, especially ASoC.  The diffstat shows regmap-related
  changes for a slight API additions / changes, and that's all.

  Looking at the code size statistics, the most significant addition is
  for Intel Skylake.  (Note that SKL support is still underway, the
  codec driver is missing.) Also STI controller driver is a major
  addition as well as a few new codec drivers.

  In HD-audio side, there are fewer changes than the past.  The
  noticeable change is the support of ELD notification from i915
  graphics driver.  Thus this pull request carries a few changes in
  drm/i915.

  Other than that, USB-audio got a rewrite of runtime PM code.  It was
  initiated by lockdep warning, but resulted in a good cleanup in the
  end.

  Below are the highlights:

  Common:
   - Factoring out of AC'97 reset code from ASoC into the core helper
   - A few regmap API extensions (in case it's not pulled yet)

  ASoC:
   - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
     RT298 and ST STI controllers
   - Machine drivers for Rockchip systems with MAX98090 and RT5645 and
     RT5650
   - Initial driver support for Intel Skylake devices
   - Lots of rsnd cleanup and enhancements
   - A few DAPM fixes and cleanups
   - A large number of cleanups in various drivers (conversion and
     standardized to regmap, component) mostly by Lars-Peter and Axel

  HD-audio:
   - Extended HD-audio core for Intel Skylake controller support
   - Quirks for Dell headsets, Alienware 15
   - Clean up of pin-based quirk tables for Realtek codecs
   - ELD notifier implenetation for Intel HDMI/DP

  USB-audio:
   - Refactor runtime PM code to make lockdep happier"

* tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
  drm/i915: Add locks around audio component bind/unbind
  drm/i915: Drop port_mst_index parameter from pin/eld callback
  ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()
  ALSA: hda - Wake the codec up on pin/ELD notify events
  ALSA: hda - allow codecs to access the i915 pin/ELD callback
  drm/i915: Call audio pin/ELD notify function
  drm/i915: Add audio pin sense / ELD callback
  ASoC: zx296702-i2s: Fix resource leak when unload module
  ASoC: sti_uniperif: Ensure component is unregistered when unload module
  ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource
  ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform
  ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak
  ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure
  ASoC: Clean up docbook warnings
  ASoC: txx9: Convert to devm_snd_soc_register_platform
  ASoC: pxa: Convert to devm_snd_soc_register_platform
  ASoC: nuc900: Convert to devm_snd_soc_register_platform
  ASoC: blackfin: Convert to devm_snd_soc_register_platform
  ASoC: au1x: Convert to devm_snd_soc_register_platform
  ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops
  ...

Pull backlight updates from Lee Jones:
 - Stop using LP855X Platform Data to control regulators
 - Move PWM8941 WLED driver into Backlight
 - Remove invalid use of IS_ERR_VALUE() macro
 - Remove duplicate check for NULL data before unregistering
 - Export I2C Device ID structure

* tag 'backlight-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: tosa: Export I2C module alias information
  backlight: lp8788_bl: Delete a check before backlight_device_unregister()
  backlight: sky81452: Remove unneeded use of IS_ERR_VALUE() macro
  backlight: pm8941-wled: Move PM8941 WLED driver to backlight
  backlight: lp855x: Use private data for regulator control

Pull MFD updates from Lee Jones:
 "New Device Support:
   - New Clocksource driver from ST
   - New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
   - Add support for Arizona WM8998 and WM1814
   - Add support for Dialog Semi DA9062 and DA9063
   - Add support for Kontron COMe-bBL6 and COMe-cBW6
   - Add support for X-Powers AXP152
   - Add support for Atmel, many
   - Add support for STMPE, many
   - Add support for USB in X-Powers AXP22X

  Core Frameworks:
   - New Base API to traverse devices and their children in reverse order

  Bug Fixes:
   - Fix race between runtime-suspend and IRQs
   - Obtain platform data form more reliable source

  Fix-ups:
   - Constifying things
   - Variable signage changes
   - Kconfig depends|selects changes
   - Make use of BIT() macro
   - Do not supply .owner attribute in *_driver structures
   - MAINTAINERS entries
   - Stop using set_irq_flags()
   - Start using irq_set_chained_handler_and_data()
   - Export DT device ID structures"

* tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: jz4740-adc: Init mask cache in generic IRQ chip
  mfd: cros_ec: spi: Add OF match table
  mfd: stmpe: Add OF match table
  mfd: max77686: Split out regulator part from the DT binding
  mfd: Add DT binding for Maxim MAX77802 IC
  mfd: max77686: Use a generic name for the PMIC node in the example
  mfd: max77686: Don't suggest in binding to use a deprecated property
  mfd: Add MFD_CROS_EC dependencies
  mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers
  mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
  mfd: axp20x: Add missing registers, and mark more registers volatile
  mfd: arizona: Fixup some formatting/white space errors
  mfd: wm8994: Fix NULL pointer exception on missing pdata
  of: Add vendor prefix for Nuvoton
  mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event
  mfd: atmel-hlcdc: Add support for new SoCs
  mfd: Export OF module alias information in missing drivers
  mfd: stw481x: Export I2C module alias information
  mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
  mfd: max899x: Avoid redundant irq_data lookup
  ...

Pull dmaengine updates from Vinod Koul:
 "This time we have aded a new capability for scatter-gathered memset
  using dmaengine APIs.  This is supported in xdmac & hdmac drivers

  We have added support for reusing descriptors for examples like video
  buffers etc.  Driver will follow

  The behaviour of descriptor ack has been clarified and documented

  New devices added are:
   - dma controller in sun[457]i SoCs
   - lpc18xx dmamux
   - ZTE ZX296702 dma controller
   - Analog Devices AXI-DMAC DMA controller
   - eDMA support for dma-crossbar
   - imx6sx support in imx-sdma driver
   - imx-sdma device to device support

  Other:
   - jz4780 fixes
   - ioatdma large refactor and cleanup for removal of ioat v1 and v2
     which is deprecated and fixes
   - ACPI support in X-Gene DMA engine driver
   - ipu irq fixes
   - mvxor fixes
   - minor fixes spread thru drivers"

[ The Kconfig and Makefile entries got re-sorted alphabetically, and I
  handled the conflict with the new Intel integrated IDMA driver by
  slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in
  order to keep the Intel entries together.  I think it might be a good
  idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make
  the sorting be a true sort, not this mismash.

  Also, this merge disables the COMPILE_TEST for the sun4i DMA
  controller, because it does not compile cleanly at all.     - Linus ]

* tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
  dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs
  dmaengine :ipu: change ipu_irq_handler() to remove compile warning
  dmaengine: ioatdma: Fix variable array length
  dmaengine: ioatdma: fix sparse "error" with prep lock
  dmaengine: hdmac: Add memset capabilities
  dmaengine: sort the sh Makefile
  dmaengine: sort the sh Kconfig
  dmaengine: sort the dw Kconfig
  dmaengine: sort the Kconfig
  dmaengine: sort the makefile
  drivers/dma: make mv_xor.c driver explicitly non-modular
  dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller
  devicetree: Add bindings documentation for Analog Devices AXI-DMAC
  dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests
  dmaengine: ioatdma: fix coccinelle warning
  dmaengine: ioatdma: fix zero day warning on incompatible pointer type
  dmaengine: tegra-apb: Simplify locking for device using global pause
  dmaengine: tegra-apb: Remove unnecessary return statements and variables
  dmaengine: tegra-apb: Avoid unnecessary channel base address calculation
  dmaengine: tegra-apb: Remove unused variables
  ...

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.3 development
  cycle.

  Like with GPIO it's a lot of stuff.  If my subsystems are any sign of
  the overall tempo of the kernel v4.3 will be a gigantic diff.

[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
  we'll see - Linus ]

  Core changes:

   - It is possible configure groups in debugfs.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().  This series was
     created by Thomas Gleixner after the problem was observed by
     Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx also wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

  Driver feature enhancements:

   - Power management support for the SiRF SoC Atlas 7.

   - Power down support for the Qualcomm driver.

   - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
     in IRQ handlers to play nice with the realtime patch set.

   - Rework and new modes handling for Qualcomm SPMI-MPP.

   - Pinconf power source config for SH PFC.

  New drivers and subdrivers:

   - A new driver for Conexant Digicolor CX92755.

   - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
     ProXtream2 and PH1-LD6b SoC pin control support.

   - Reverse-egineered the S/PDIF settings for the Allwinner sun4i
     driver.

   - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs

   - A new Freescale i.mx6ul subdriver.

  Cleanup:

   - Remove platform data support in a number of SH PFC subdrivers"

* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
  pinctrl: at91: fix null pointer dereference
  pinctrl: mediatek: Implement wake handler and suspend resume
  pinctrl: mediatek: Fix multiple registration issue.
  pinctrl: sh-pfc: r8a7794: add USB pin groups
  pinctrl: at91: Use generic irq_{request,release}_resources()
  pinctrl: cherryview: Use raw_spinlock for locking
  pinctrl: baytrail: Use raw_spinlock for locking
  pinctrl: imx6ul: Remove .owner field
  pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
  pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
  clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
  pinctrl: sun4i: add spdif to pin description.
  pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
  pinctrl: baytrail: Serialize all register access
  pinctrl: baytrail: Drop FSF mailing address
  pinctrl: rockchip: only enable gpio clock when it setting
  pinctrl/mediatek: fix spelling mistake in dev_err error message
  pinctrl: cherryview: Serialize all register access
  pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
  pinctrl: nomadik: reflect current input value
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.3 kernel cycle.

  There is quite a lot going on in the GPIO subsystem this merge window,
  so the main matter is decribed below.

  The hits in other subsystems when making the GPIO flags optional are
  all ACKed by their respective subsystem maintainers.

  Core changes:

   - Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions
     of the descriptor calls that did not use the flags argument on the
     end.  This was around for too long and eventually Uwe Kleine-König
     took the time to clean it out and the last users are removed along
     with the macros in this tag.  In several cases the use of flags
     simplifies the code.  For this reason we have (ACKed) patches
     hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the
     nail with removing the macros.

   - Add a fat document describing how much ready-made GPIO stuff we
     have i the kernel to discourage people from reinventing a square
     wheel in userspace, as so often happens.

   - Create a separate lockdep class for each instance of a GPIO IRQ
     chip instead of using one class for all chips, as the current code
     will not work with systems with several GPIO chips doing lockdep
     debugging.

   - Protect against driver unloading also when a GPIO line is only used
     as IRQ for the GPIOLIB_IRQCHIP helpers.

   - If the GPIO chip has no designated owner, assign the parent device
     driver owner as owner.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().

     This series was created by Thomas Gleixner after the problem was
     observed by Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx and Jiang Liu wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

   - Rob Herring killed off the set_irq_flags() for all GPIO drivers.
     This was an ARM specific function that is replaced with the generic
     irq_modify_status() where special flags are actually needed.

   - When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER
     if the pin controller isn't available.  Pretty logical, yet needed
     to be fixed.

   - If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call
     back, then call these instead of the defaults provided by the
     GPIOLIB.

   - Fix an undocumented ABI hole: named GPIOs were not properly
     documented.

  Driver improvements:

   - Add get_direction() support to the generic GPIO driver, it's
     strange that we didn't have that before.

   - Make it possible to have input-only GPIO chips using the generic
     GPIO driver.

   - Clean out platform data support from the Emma Mobile (EM) driver

   - Finegrained runtime PM support for the RCAR driver.

   - Support r8a7795 (R-car H3) in the RCAR driver.

   - Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.

   - Some consolidation and new support in the MPC8xxx driver, we now
     support MPC5125.

   - Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
     spinlocks making it work better with the realime patches.

   - Interrupt support for the EXTRAXFS GPIO driver.

   - Make the ETRAXFS GPIO driver support also ARTPEC-3.

   - Interrupt and wakeup support for the BRCMSTB driver, also for
     wakeup from S5 cold boot.

   - Mask MXC IRQs during suspend.

   - Improve OMAP2 GPIO set_debounce() to work according to spec.

   - The VF610 driver handles IRQs properly.

  New drivers:

   - ZTE ZX GPIO driver"

* tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: extraxfs: fix returnvar.cocci warnings"
  gpio: tc3589x: use static container helper
  gpio: xlp: fix error return code
  gpio: vf610: handle level IRQ's properly
  gpio: max732x: Fix error handling in probe()
  gpio: omap: fix clk_prepare/unprepare usage
  gpio: omap: protect regs access in omap_gpio_irq_handler
  gpio: omap: fix omap2_set_gpio_debounce
  gpio: omap: switch to use platform_get_irq
  gpio: omap: remove wrong irq_domain_remove usage in probe
  gpiolib: add description for gpio irqchip fields in struct gpio_chip
  gpio: extraxfs: fix returnvar.cocci warnings
  gpiolib: irqchip: use different lockdep class for each gpio irqchip
  gpio/grgpio: fix deadlock in grgpio_irq_unmap()
  Documentation: gpio: consumer: describe active low property
  gpio: mxc: fix section mismatch warning
  gpio/mxc: mask gpio interrupts in suspend
  gpio: omap: Fix missing raw locks conversion
  gpio: brcmstb: support wakeup from S5 cold boot
  gpio: brcmstb: Add interrupt and wakeup source support
  ...

Pull tile updates from Chris Metcalf:
 "This includes secure computing support as well as miscellaneous minor
  improvements"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: correct some typos in opcode type names
  tile/vdso: emit a GNU hash as well
  tile: Remove finish_arch_switch
  tile: enable full SECCOMP support
  tile/time: Migrate to new 'set-state' interface

This should never happen so warn when the count does
not equal the expected size.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull arm64 updates from Will Deacon:

 - Support for new architectural features introduced in ARMv8.1:
   * Privileged Access Never (PAN) to catch user pointer dereferences in
     the kernel
   * Large System Extension (LSE) for building scalable atomics and locks
     (depends on locking/arch-atomic from tip, which is included here)
   * Hardware Dirty Bit Management (DBM) for updating clean PTEs
     automatically

 - Move our PSCI implementation out into drivers/firmware/, where it can
   be shared with arch/arm/. RMK has also pulled this component branch
   and has additional patches moving arch/arm/ over. MAINTAINERS is
   updated accordingly.

 - Better BUG implementation based on the BRK instruction for trapping

 - Leaf TLB invalidation for unmapping user pages

 - Support for PROBE_ONLY PCI configurations

 - Various cleanups and non-critical fixes, including:
   * Always flush FP/SIMD state over exec()
   * Restrict memblock additions based on range of linear mapping
   * Ensure *(LIST_POISON) generates a fatal fault
   * Context-tracking syscall return no longer corrupts return value when
     not forced on.
   * Alternatives patching synchronisation/stability improvements
   * Signed sub-word cmpxchg compare fix (tickled by HAVE_CMPXCHG_LOCAL)
   * Force SMP=y
   * Hide direct DCC access from userspace
   * Fix EFI stub memory allocation when DRAM starts at 0x0

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  arm64: flush FP/SIMD state correctly after execve()
  arm64: makefile: fix perf_callchain.o kconfig dependency
  arm64: set MAX_MEMBLOCK_ADDR according to linear region size
  of/fdt: make memblock maximum physical address arch configurable
  arm64: Fix source code file path in comments
  arm64: entry: always restore x0 from the stack on syscall return
  arm64: mdscr_el1: avoid exposing DCC to userspace
  arm64: kconfig: Move LIST_POISON to a safe value
  arm64: Add __exception_irq_entry definition for function graph
  arm64: mm: ensure patched kernel text is fetched from PoU
  arm64: alternatives: ensure secondary CPUs execute ISB after patching
  arm64: make ll/sc __cmpxchg_case_##name asm consistent
  arm64: dma-mapping: Simplify pgprot handling
  arm64: restore cpu suspend/resume functionality
  ARM64: PCI: do not enable resources on PROBE_ONLY systems
  arm64: cmpxchg: truncate sub-word signed types before comparison
  arm64: alternative: put secondary CPUs into polling loop during patch
  arm64/Documentation: clarify wording regarding memory below the Image
  arm64: lse: fix lse cmpxchg code indentation
  arm64: remove redundant object file list
  ...

Merge tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel into drm-next

i915 display fixes headed for v4.3. Mostly SKL, but some regression
fixes too.

* tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel:
  i915: Set ddi_pll_sel in DP MST path
  drm/i915: Don't use link_bw for PLL setup
  drm/i915: Preserve SSC earlier
  drm/i915/skl: Adding DDI_E power well domain
  drm/i915: eDP can be present on DDI-E
  drm/i915/skl: Enable DDI-E
  drm/i915: Enable HDMI on DDI-E
  drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
  drm/i915: Check DP link status on long hpd too
  drm/i915: set CDCLK if DPLL0 enabled during resuming from S3

Merge branch 'drm-rockchip-2015-08-26' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

Here are some fixes and some new features for rockchip drm,
    tested on popmetal rk3288 board, can you land them?

* 'drm-rockchip-2015-08-26' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: support plane scale
  drm/rockchip: vop: restore vop registers when resume
  drm/rockchip: vop: Default enable win2/3 area0 bit
  drm/rockchip: vop: Add yuv plane support
  drm/rockchip: vop: Fix window dest start point
  drm/rockchip: vop: Fix virtual stride calculation

Pull request of 2015-09-01

A single commit. Workaround for
https://bugzilla.redhat.com/show_bug.cgi?id=1227193

* tag 'vmwgfx-next-15-09-01' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Allow dropped masters render-node like access on legacy nodes v2

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

   This is a last pull request, which includes two g2d patches
   I missed, and more cleanup series of Exynos drm driver.

   The cleanup series makes Exynos drm driver more simple,
   and removes unnecessary codes, and considers multiple plane format
   of framebuffer. I hope this not to be late.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: remove buf_cnt from struct exynos_drm_fb
  drm/exynos: remove exynos_drm_fb_get_buf_cnt()
  drm/exynos: cleanup exynos_user_fb_create()
  drm/exynos: update exynos_drm_framebuffer_init() for multiple buffers
  drm/exynos: cleanup to get gem object for fb
  drm/exynos: update fb_info via only one function
  drm/exynos: cleanup exynos_drm_fbdev_update()
  drm/exynos: s/exynos_gem_obj/obj in exynos_drm_fbdev.c
  drm/exynos: remove exynos_drm_fb_set_buf_cnt()
  drm/exynos: remove superfluous checks in g2d_check_reg_offset()
  drm/exynos: fix size check in g2d_check_buf_desc_is_valid()

More fixes for radeon and amdgpu for 4.3:
- Send full DP aux address fixes for radeon and amdgpu
- Fix an HDMI display regression for pre-DCE5 parts
- UVD suspend fixes for amdgpu
- Add an rs480 suspend quirk
- Fix bo reserve handling in amdgpu GEM_OP ioctl
- GPU scheduler fixes
- SDMA optimizations
- MEC fix for Fiji

* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
  drm/amdgpu: set MEC doorbell range for Fiji
  drm/amdgpu: implement burst NOP for SDMA
  drm/amdgpu: add insert_nop ring func and default implementation
  drm/amdgpu: add amdgpu_get_sdma_instance helper function
  drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
  drm/amdgpu: add burst_nop flag for sdma
  drm/amdgpu: add count field for the SDMA NOP packet v2
  drm/amdgpu: use PT for VM sync on unmap
  drm/amdgpu: make wait_event uninterruptible in push_job
  drm/amdgpu: fix amdgpu_bo_unreserve order in GEM_OP IOCTL v2
  drm/amdgpu: partially revert "modify amdgpu_fence_wait_any() to amdgpu_fence_wait_multiple()" v2
  Add radeon suspend/resume quirk for HP Compaq dc5750.
  drm/amdgpu: re-work sync_resv
  drm/amdgpu/atom: Send out the full AUX address
  drm/radeon/native: Send out the full AUX address
  drm/radeon/atom: Send out the full AUX address
  drm/amdgpu: use IB for fill_buffer instead of direct command
  drm/amdgpu: stop trying to suspend UVD sessions v2
  drm/amdgpu: add scheduler dependency callback v2
  drm/amdgpu: let the scheduler work more with jobs v2
  ...

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.3 for MIPS.  Here's the summary:

  Three fixes that didn't make 4.2-stable:

   - a -Os build might compile the kernel using the MIPS16 instruction
     set but the R2 optimized inline functions in <uapi/asm/swab.h> are
     implemented using 32-bit wide instructions which is invalid.

   - a build error in pgtable-bits.h for a particular kernel
     configuration.

   - accessing registers of the CM GCR might have been compiled to use
     64 bit accesses but these registers are onl 32 bit wide.

  And also a few new bits:

   - move the ATH79 GPIO driver to drivers/gpio

   - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h,
     change ATH79 accordingly.

   - fix definition of pgprot_writecombine

   - add an implementation of dma_map_ops.mmap

   - fix alignment of quiet build output for vmlinuz link

   - BCM47xx: Use kmemdup rather than duplicating its implementation

   - Netlogic: Fix 0x0x prefixes of constants.

   - merge Bjorn Helgaas' series to remove most of the weak keywords
     from function declarations.

   - CP0 and CP1 registers are best considered treated as unsigned
     values to avoid large values from becoming negative values.

   - improve support for the MIPS GIC timer.

   - enable common clock framework for Malta and SEAD3.

   - a number of improvments and fixes to dump_tlb().

   - document the MIPS TLB dump functionality in Magic SysRq.

   - Cavium Octeon CN68XX improvments.

   - NetLogic improvments.

   - irq: Use access helper irq_data_get_affinity_mask.

   - handle MSA unaligned accesses.

   - a number of R6-related math-emu fixes.

   - support for I6400.

   - improvments to MSA support.

   - add uprobes support.

   - move from deprecated __initcall to arch_initcall.

   - remove finish_arch_switch().

   - IRQ cleanups by Thomas Gleixner.

   - migrate to new 'set-state' interface.

   - random small cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits)
  MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16.
  MIPS: Fix alignment of quiet build output for vmlinuz link
  MIPS: math-emu: Remove unused handle_dsemul function declaration
  MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
  MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
  MIPS: inst.h: Add new MIPS R6 FPU opcodes
  MIPS: Octeon: Fix management port MII address on Kontron S1901
  MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation
  STAGING: Octeon: Use common helpers for determining interface and port
  MIPS: Octeon: Support interfaces 4 and 5
  MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports
  MIPS: Octeon: Initialize CN68XX PKO
  STAGING: Octeon: Support CN68XX style WQE
  ...

Pull powerpc updates from Michael Ellerman:

 - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
   from Benjamin Herrenschmidt

 - EEH fixes for SRIOV from Gavin

 - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth

 - use hardware RNG for arch_get_random_seed_* not arch_get_random_*
   from Paul Mackerras

 - seccomp filter support from Michael Ellerman

 - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
   Salgaonkar

 - add powerpc timebase as a trace clock source from Naveen N.  Rao

 - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual

 - add an inline function to update POWER8 HID0 from Gautham R.  Shenoy

 - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman

 - drop support for 64K local store on 4K kernels from Michael Ellerman

 - move dma_get_required_mask() from pnv_phb to pci_controller_ops from
   Andrew Donnellan

 - initialize distance lookup table from drconf path from Nikunj A
   Dadhania

 - enable RTC class support from Vaibhav Jain

 - disable automatically blocked PCI config from Gavin Shan

 - add LEDs driver for PowerNV platform from Vasant Hegde

 - fix endianness issues in the HVSI driver from Laurent Dufour

 - kexec endian fixes from Samuel Mendoza-Jonas

 - fix corrupted pdn list from Gavin Shan

 - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan

 - Freescale updates from Scott: Highlights include 32-bit memcpy/memset
   optimizations, checksum optimizations, 85xx config fragments and
   updates, device tree updates, e6500 fixes for non-SMP, and misc
   cleanup and minor fixes.

 - a ton of cxl updates & fixes:
    - add explicit precision specifiers from Rasmus Villemoes
    - use more common format specifier from Rasmus Villemoes
    - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
    - destroy afu->contexts_idr on release of an afu from Johannes
      Thumshirn
    - compile with -Werror from Daniel Axtens
    - EEH support from Daniel Axtens
    - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
    - add alternate MMIO error handling from Ian Munsie
    - allow release of contexts which have been OPENED but not STARTED
      from Andrew Donnellan
    - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
    - release irqs if memory allocation fails from Vaibhav Jain
    - remove racy attempt to force EEH invocation in reset from Daniel
      Axtens
    - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
    - fix force unmapping mmaps of contexts allocated through the kernel
      api from Ian Munsie
    - set up and enable PSL Timebase from Philippe Bergheaud

* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
  cxl: Set up and enable PSL Timebase
  cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
  cxl: Fix + cleanup error paths in cxl_dev_context_init
  powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
  powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
  powerpc/pseries: Fix corrupted pdn list
  powerpc/powernv: Enable LEDS support
  powerpc/iommu: Set default DMA offset in dma_dev_setup
  cxl: Remove racy attempt to force EEH invocation in reset
  cxl: Release irqs if memory allocation fails
  cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
  powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
  powerpc/powernv: Reset HILE before kexec_sequence()
  powerpc/kexec: Reset secondary cpu endianness before kexec
  powerpc/hvsi: Fix endianness issues in the HVSI driver
  leds/powernv: Add driver for PowerNV platform
  powerpc/powernv: Create LED platform device
  powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
  powerpc/powernv: Fix the log message when disabling VF
  cxl: Allow release of contexts which have been OPENED but not STARTED
  ...

Pull ARM pcmcia updates from Russell King:
 "A series of changes updating the PXA and SA11x0 PCMCIA code to use
  devm_* APIs, and resolve some resource leaks in doing so.  This
  results in a few small cleanups which are included in this set.

  FYI, the recommit of these today is to add Robert Jarzmik's
  reviewed-by tags, which I'd forgotten to add from mid-July"

* 'pcmcia' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  pcmcia: soc_common: remove skt_dev_info's clk pointer
  pcmcia: sa11xx_base.c: remove useless init/exit functions
  pcmcia: sa1111: simplify clk handing in sa1111_pcmcia_add()
  pcmcia: sa1111: update socket driver to use devm_clk_get() API
  pcmcia: pxa2xx: convert memory allocation to devm_* API
  pcmcia: pxa2xx: update socket driver to use devm_clk_get() API
  pcmcia: sa11x0: convert memory allocation to devm_* API
  pcmcia: sa11x0: fix missing clk_put() in sa11x0 socket drivers

Pull ARM development updates from Russell King:
 "Included in this update:

   - moving PSCI code from ARM64/ARM to drivers/

   - removal of some architecture internals from global kernel view

   - addition of software based "privileged no access" support using the
     old domains register to turn off the ability for kernel
     loads/stores to access userspace.  Only the proper accessors will
     be usable.

   - addition of early fixup support for early console

   - re-addition (and reimplementation) of OMAP special interconnect
     barrier

   - removal of finish_arch_switch()

   - only expose cpuX/online in sysfs if hotpluggable

   - a number of code cleanups"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits)
  ARM: software-based priviledged-no-access support
  ARM: entry: provide uaccess assembly macro hooks
  ARM: entry: get rid of multiple macro definitions
  ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die()
  ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore()
  ARM: mm: improve do_ldrd_abort macro
  ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit()
  ARM: entry: efficiency cleanups
  ARM: entry: get rid of asm_trace_hardirqs_on_cond
  ARM: uaccess: simplify user access assembly
  ARM: domains: remove DOMAIN_TABLE
  ARM: domains: keep vectors in separate domain
  ARM: domains: get rid of manager mode for user domain
  ARM: domains: move initial domain setting value to asm/domains.h
  ARM: domains: provide domain_mask()
  ARM: domains: switch to keeping domain value in register
  ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE
  ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD()
  ARM: 8416/1: Feroceon: use of_iomap() to map register base
  ARM: 8415/1: early fixmap support for earlycon
  ...

Pull perf fixes from Ingo Molnar:
 "Tooling fixes plus a handful of late arriving tooling changes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix link time error with sample_reg_masks on non x86
  perf build: Fix Intel PT instruction decoder dependency problem
  perf dwarf: Fix potential array out of bounds access
  perf record: Add ability to name registers to record
  perf/x86: Add list of register names
  perf script: Enable printing of interrupted machine state
  perf evlist: Open event on evsel cpus and threads
  bpf tools: New API to get name from a BPF object
  perf tools: Fix build on powerpc broken by pt/bts

Pull locking and atomic updates from Ingo Molnar:
 "Main changes in this cycle are:

   - Extend atomic primitives with coherent logic op primitives
     (atomic_{or,and,xor}()) and deprecate the old partial APIs
     (atomic_{set,clear}_mask())

     The old ops were incoherent with incompatible signatures across
     architectures and with incomplete support.  Now every architecture
     supports the primitives consistently (by Peter Zijlstra)

   - Generic support for 'relaxed atomics':

       - _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
       - atomic_read_acquire()
       - atomic_set_release()

     This came out of porting qwrlock code to arm64 (by Will Deacon)

   - Clean up the fragile static_key APIs that were causing repeat bugs,
     by introducing a new one:

       DEFINE_STATIC_KEY_TRUE(name);
       DEFINE_STATIC_KEY_FALSE(name);

     which define a key of different types with an initial true/false
     value.

     Then allow:

       static_branch_likely()
       static_branch_unlikely()

     to take a key of either type and emit the right instruction for the
     case.  To be able to know the 'type' of the static key we encode it
     in the jump entry (by Peter Zijlstra)

   - Static key self-tests (by Jason Baron)

   - qrwlock optimizations (by Waiman Long)

   - small futex enhancements (by Davidlohr Bueso)

   - ... and misc other changes"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  jump_label/x86: Work around asm build bug on older/backported GCCs
  locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
  locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
  locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
  locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
  locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
  locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
  locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
  locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
  locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
  locking/static_keys: Make verify_keys() static
  jump label, locking/static_keys: Update docs
  locking/static_keys: Provide a selftest
  jump_label: Provide a self-test
  s390/uaccess, locking/static_keys: employ static_branch_likely()
  x86, tsc, locking/static_keys: Employ static_branch_likely()
  locking/static_keys: Add selftest
  locking/static_keys: Add a new static_key interface
  locking/static_keys: Rework update logic
  locking/static_keys: Add static_key_{en,dis}able() helpers
  ...

Pull f2fs updates from Jaegeuk Kim:
 "The major work includes fixing and enhancing the existing extent_cache
  feature, which has been well settling down so far and now it becomes a
  default mount option accordingly.

  Also, this version newly registers a f2fs memory shrinker to reclaim
  several objects consumed by a couple of data structures in order to
  avoid memory pressures.

  Another new feature is to add ioctl(F2FS_GARBAGE_COLLECT) which
  triggers a cleaning job explicitly by users.

  Most of the other patches are to fix bugs occurred in the corner cases
  across the whole code area"

* tag 'for-f2fs-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (85 commits)
  f2fs: upset segment_info repair
  f2fs: avoid accessing NULL pointer in f2fs_drop_largest_extent
  f2fs: update extent tree in batches
  f2fs: fix to release inode correctly
  f2fs: handle f2fs_truncate error correctly
  f2fs: avoid unneeded initializing when converting inline dentry
  f2fs: atomically set inode->i_flags
  f2fs: fix wrong pointer access during try_to_free_nids
  f2fs: use __GFP_NOFAIL to avoid infinite loop
  f2fs: lookup neighbor extent nodes for merging later
  f2fs: split __insert_extent_tree_ret for readability
  f2fs: kill dead code in __insert_extent_tree
  f2fs: adjust showing of extent cache stat
  f2fs: add largest/cached stat in extent cache
  f2fs: fix incorrect mapping for bmap
  f2fs: add annotation for space utilization of regular/inline dentry
  f2fs: fix to update cached_en of extent tree properly
  f2fs: fix typo
  f2fs: check the node block address of newly allocated nid
  f2fs: go out for insert_inode_locked failure
  ...

Pull dlm updates from David Teigland:
 "This set mainly includes a change to the way the dlm uses the SCTP API
  in the kernel, removing the direct dependency on the sctp module.
  Other odd SCTP-related fixes are also included.

  The other notable fix is for a long standing regression in the
  behavior of lock value blocks for user space locks"

* tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: print error from kernel_sendpage
  dlm: fix lvb copy for user locks
  dlm: sctp_accept_from_sock() can be static
  dlm: fix reconnecting but not sending data
  dlm: replace BUG_ON with a less severe handling
  dlm: use sctp 1-to-1 API
  dlm: fix not reconnecting on connecting error handling
  dlm: fix race while closing connections
  dlm: fix connection stealing if using SCTP

Pull ext4 updates from Ted Ts'o:
 "Pretty much all bug fixes and clean ups for 4.3, after a lot of
  features and other churn going into 4.2"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  Revert "ext4: remove block_device_ejected"
  ext4: ratelimit the file system mounted message
  ext4: silence a format string false positive
  ext4: simplify some code in read_mmp_block()
  ext4: don't manipulate recovery flag when freezing no-journal fs
  jbd2: limit number of reserved credits
  ext4 crypto: remove duplicate header file
  ext4: update c/mtime on truncate up
  jbd2: avoid infinite loop when destroying aborted journal
  ext4, jbd2: add REQ_FUA flag when recording an error in the superblock
  ext4 crypto: fix spelling typo in comment
  ext4 crypto: exit cleanly if ext4_derive_key_aes() fails
  ext4: reject journal options for ext2 mounts
  ext4: implement cgroup writeback support
  ext4: replace ext4_io_submit->io_op with ->io_wbc
  ext4 crypto: check for too-short encrypted file names
  ext4 crypto: use a jbd2 transaction when adding a crypto policy
  jbd2: speedup jbd2_journal_dirty_metadata()

Pull ext3 removal, quota & udf fixes from Jan Kara:
 "The biggest change in the pull is the removal of ext3 filesystem
  driver (~28k lines removed).  Ext4 driver is a full featured
  replacement these days and both RH and SUSE use it for several years
  without issues.  Also there are some workarounds in VM & block layer
  mainly for ext3 which we could eventually get rid of.

  Other larger change is addition of proper error handling for
  dquot_initialize().  The rest is small fixes and cleanups"

[ I wasn't convinced about the ext3 removal and worried about things
  falling through the cracks for legacy users, but ext4 maintainers
  piped up and were all unanimously in favor of removal, and maintaining
  all legacy ext3 support inside ext4.   - Linus ]

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Don't modify filesystem for read-only mounts
  quota: remove an unneeded condition
  ext4: memory leak on error in ext4_symlink()
  mm/Kconfig: NEED_BOUNCE_POOL: clean-up condition
  ext4: Improve ext4 Kconfig test
  block: Remove forced page bouncing under IO
  fs: Remove ext3 filesystem driver
  doc: Update doc about journalling layer
  jfs: Handle error from dquot_initialize()
  reiserfs: Handle error from dquot_initialize()
  ocfs2: Handle error from dquot_initialize()
  ext4: Handle error from dquot_initialize()
  ext2: Handle error from dquot_initalize()
  quota: Propagate error from ->acquire_dquot()

Merge hpfs upddate from Mikulas Patocka.

* emailed patches from Mikulas Patocka <mikulas@twibright.com>:
  hpfs: update ctime and mtime on directory modification
  hpfs: support hotfixes

Update ctime and mtime when a directory is modified. (though OS/2 doesn't
update them anyway)
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org	# v3.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the OS/2 driver hits a disk write error, it writes the sector to
another location and adds the sector mapping to the hotfix map.

This patch makes the hpfs driver understand the hotfix map and remap
accesses accoring to it.
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some buffers (UVD/VM page tables) must be placed in VRAM,
but the byte restriction for moving buffers didn't took this
into account.

Port of radeon commit 4b095566.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>

Prepare first round of input updates for 4.3 merge window.

When driver is in IAP mode ic_type query may return 0xff. However
iap_version will always be valid, so let's use it to determine parameters
of the firmware that the controller is supposed to accept.
Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The logic was reversed.  This feature is not enabled
at the moment, but fix it now for the future.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>