- 07 Jun, 2015 9 commits
-
-
Toshi Kani authored
Replace all calls to ioremap_writethrough() with ioremap_wt(). Remove ioremap_writethrough() too. Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-10-git-send-email-bp@alien8.deSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Toshi Kani authored
Add ioremap_wt() to all arch-specific asm/io.h headers which define ioremap_wc() locally. These headers do not include <asm-generic/iomap.h>. Some of them include <asm-generic/io.h>, but ioremap_wt() is defined for consistency since they define all ioremap_xxx locally. In all architectures without Write-Through support, ioremap_wt() is defined indentical to ioremap_nocache(). frv and m68k already have ioremap_writethrough(). On those we add ioremap_wt() indetical to ioremap_writethrough() and defines ARCH_HAS_IOREMAP_WT in both architectures. The ioremap_wt() interface is exported to drivers. Signed-off-by:
-
Toshi Kani authored
Add ioremap_wt() for creating Write-Through mappings on x86. It follows the same model as ioremap_wc() for multi-arch support. Define ARCH_HAS_IOREMAP_WT in the x86 version of io.h to indicate that ioremap_wt() is implemented on x86. Also update the PAT documentation file to cover ioremap_wt(). Signed-off-by:
-
Toshi Kani authored
__ioremap_caller() calls reserve_memtype() and the passed down @new_pcm contains the actual page cache type it reserved in the success case. is_new_memtype_allowed() verifies if converting to the new page cache type is allowed when @pcm (the requested type) is different from @new_pcm. When WT is requested, the caller expects that writes are ordered and uncached. Therefore, enhance is_new_memtype_allowed() to disallow the following cases: - If the request is WT, mapping type cannot be WB - If the request is WT, mapping type cannot be WC Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-7-git-send-email-bp@alien8.deSigned-off-by:
-
Toshi Kani authored
When a target range is in RAM, reserve_ram_pages_type() verifies the requested type. Change it to fail WT and WP requests with -EINVAL since set_page_memtype() is limited to handle three types: WB, WC and UC-. Signed-off-by:
-
Toshi Kani authored
Assign Write-Through type to the PA7 slot in the PAT MSR when the processor is not affected by PAT errata. The PA7 slot is chosen to improve robustness in the presence of errata that might cause the high PAT bit to be ignored. This way a buggy PA7 slot access will hit the PA3 slot, which is UC, so at worst we lose performance without causing a correctness issue. The following Intel processors are affected by the PAT errata. Errata CPUID ---------------------------------------------------- Pentium 2, A52 family 0x6, model 0x5 Pentium 3, E27 family 0x6, model 0x7, 0x8 Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa Pentium M, Y26 family 0x6, model 0x9 Pentium M 90nm, X9 family 0x6, model 0xd Pentium 4, N46 family 0xf, model 0x0 Instead of making sharp boundary checks, we remain conservative and exclude all Pentium 2, 3, M and 4 family processors. For those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default setup in __cachemode2pte_tbl[]. Signed-off-by:
-
Borislav Petkov authored
Now that we emulate a PAT table when PAT is disabled, there's no need for those checks anymore as the PAT abstraction will handle those cases too. Based on a conglomerate patch from Toshi Kani. Signed-off-by:
-
Borislav Petkov authored
In the case when PAT is disabled on the command line with "nopat" or when virtualization doesn't support PAT (correctly) - see 9d34cfdf ("x86: Don't rely on VMWare emulating PAT MSR correctly"). we emulate it using the PWT and PCD cache attribute bits. Get rid of boot_pat_state while at it. Based on a conglomerate patch from Toshi Kani. Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-3-git-send-email-bp@alien8.deSigned-off-by:
-
Borislav Petkov authored
Split it into a BSP and AP version which makes the PAT initialization path actually readable again. Signed-off-by:
-
- 03 Jun, 2015 1 commit
-
-
Stephen Rothwell authored
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so remove it from there and fix up the resulting build problems triggered on x86 {64|32}-bit {def|allmod|allno}configs. The breakages were triggering in places where x86 builds relied on vmalloc() facilities but did not include <linux/vmalloc.h> explicitly and relied on the implicit inclusion via <asm/io.h>. Also add: - <linux/init.h> to <linux/io.h> - <asm/pgtable_types> to <asm/io.h> ... which were two other implicit header file dependencies. Suggested-by:David Miller <davem@davemloft.net> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> [ Tidied up the changelog. ] Acked-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Vinod Koul <vinod.koul@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Colin Cross <ccross@android.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Suma Ramars <sramars@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
- 28 May, 2015 1 commit
-
-
Jan Beulich authored
... as their only caller is. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5566EE07020000780007E683@mail.emea.novell.comSigned-off-by:
-
- 27 May, 2015 13 commits
-
-
Luis R. Rodriguez authored
Two Linux device drivers cannot work with PAT and the work required to make them work is significant. There is not enough motivation to convert these drivers over to use PAT properly, the compromise reached is to let drivers that cannot be ported to PAT check if PAT was enabled and if so fail on probe with a recommendation to boot with the "nopat" kernel parameter. Signed-off-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
Luis R. Rodriguez authored
We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by:
-
Luis R. Rodriguez authored
It is possible to enable CONFIG_MTRR and CONFIG_X86_PAT and end up with a system with MTRR functionality disabled but PAT functionality enabled. This can happen, for instance, when the Xen hypervisor is used where MTRRs are not supported but PAT is. This can happen on Linux as of commit 47591df5 ("xen: Support Xen pv-domains using PAT") by Juergen, introduced in v3.19. Technically, we should assume the proper CPU bits would be set to disable MTRRs but we can't always rely on this. At least on the Xen Hypervisor, for instance, only X86_FEATURE_MTRR was disabled as of Xen 4.4 through Xen commit 586ab6a [0], but not X86_FEATURE_K6_MTRR, X86_FEATURE_CENTAUR_MCR, or X86_FEATURE_CYRIX_ARR for instance. Roger Pau Monné has clarified though that although this is technically true we will never support PVH on these CPU types so Xen has no need to disable these bits on those systems. As per Roger, AMD K6, Centaur and VIA chips don't have the necessary hardware extensions to allow running PVH guests [1]. As per Toshi it is also possible for the BIOS to disable MTRR support, in such cases get_mtrr_state() would update the MTRR state as per the BIOS, we need to propagate this information as well. x86 MTRR code relies on quite a bit of checks for mtrr_if being set to check to see if MTRRs did get set up. Instead, lets provide a generic getter for that. This also adds a few checks where they were not before which could potentially safeguard ourselves against incorrect usage of MTRR where this was not desirable. Where possible match error codes as if MTRRs were disabled on arch/x86/include/asm/mtrr.h. Lastly, since disabling MTRRs can happen at run time and we could end up with PAT enabled, best record now in our logs when MTRRs are disabled. [0] ~/devel/xen (git::stable-4.5)$ git describe --contains 586ab6a 4.4.0-rc1~18 [1] http://lists.xenproject.org/archives/html/xen-devel/2015-03/msg03460.htmlSigned-off-by:
-
Luis R. Rodriguez authored
There is only one user but since we're going to bury MTRR next out of access to drivers, expose this last piece of API to drivers in a general fashion only needing io.h for access to helpers. Signed-off-by:
-
Luis R. Rodriguez authored
As part of the effort to phase out MTRR use document write-combining MTRR effects on pages with different non-PAT page attributes flags and different PAT entry values. Extend arch_phys_wc_add() documentation to clarify power of two sizes / boundary requirements as we phase out mtrr_add() use. Lastly hint towards ioremap_uc() for corner cases on device drivers working with devices with mixed regions where MTRR size requirements would otherwise not enable write-combining effective memory types. Signed-off-by:
-
Luis R. Rodriguez authored
Use pr_info() instead of the old printk to prefix the component where things are coming from. With this readers will know exactly where the message is coming from. We use pr_* helpers but define pr_fmt to the empty string for easier grepping for those error messages. We leave the users of dprintk() in place, this will print only when the debugpat kernel parameter is enabled. We want to leave those enabled as a debug feature, but also make them use the same prefix. Signed-off-by:
-
Toshi Kani authored
This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by:
-
Toshi Kani authored
MTRRs contain fixed and variable entries. mtrr_type_lookup() may repeatedly call __mtrr_type_lookup() to handle a request that overlaps with variable entries. However, __mtrr_type_lookup() also handles the fixed entries, which do not have to be repeated. Therefore, this patch creates separate functions, mtrr_type_lookup_fixed() and mtrr_type_lookup_variable(), to handle the fixed and variable ranges respectively. The patch also updates the function headers to clarify the return values and output argument. It updates comments to clarify that the repeating is necessary to handle overlaps with the default type, since overlaps with multiple entries alone can be handled without such repeating. There is no functional change in this patch. Signed-off-by:
-
Toshi Kani authored
mtrr_type_lookup() returns verbatim 0xFF when MTRRs are disabled. This patch defines MTRR_TYPE_INVALID to clarify the meaning of this value, and documents its usage. Document the return values of the kernel virtual address mapping helpers pud_set_huge(), pmd_set_huge, pud_clear_huge() and pmd_clear_huge(). There is no functional change in this patch. Signed-off-by:
-
Toshi Kani authored
'mtrr_state.enabled' contains the FE (fixed MTRRs enabled) and E (MTRRs enabled) flags in MSR_MTRRdefType. Intel SDM, section 11.11.2.1, defines these flags as follows: - All MTRRs are disabled when the E flag is clear. The FE flag has no affect when the E flag is clear. - The default type is enabled when the E flag is set. - MTRR variable ranges are enabled when the E flag is set. - MTRR fixed ranges are enabled when both E and FE flags are set. MTRR state checks in __mtrr_type_lookup() do not match with SDM. Hence, this patch makes the following changes: - The current code detects MTRRs disabled when both E and FE flags are clear in mtrr_state.enabled. Fix to detect MTRRs disabled when the E flag is clear. - The current code does not check if the FE bit is set in mtrr_state.enabled when looking at the fixed entries. Fix to check the FE flag. - The current code returns the default type when the E flag is clear in mtrr_state.enabled. However, the default type is UC when the E flag is clear. Remove the code as this case is handled as MTRR disabled with the 1st change. In addition, this patch defines the E and FE flags in mtrr_state.enabled as follows. - FE flag: MTRR_STATE_MTRR_FIXED_ENABLED - E flag: MTRR_STATE_MTRR_ENABLED print_mtrr_state() and x86_get_mtrr_mem_range() are also updated accordingly. Signed-off-by:
-
Toshi Kani authored
When an MTRR entry is inclusive to a requested range, i.e. the start and end of the request are not within the MTRR entry range but the range contains the MTRR entry entirely: range_start ... [mtrr_start ... mtrr_end] ... range_end __mtrr_type_lookup() ignores such a case because both start_state and end_state are set to zero. This bug can cause the following issues: 1) reserve_memtype() tracks an effective memory type in case a request type is WB (ex. /dev/mem blindly uses WB). Missing to track with its effective type causes a subsequent request to map the same range with the effective type to fail. 2) pud_set_huge() and pmd_set_huge() check if a requested range has any overlap with MTRRs. Missing to detect an overlap may cause a performance penalty or undefined behavior. This patch fixes the bug by adding a new flag, 'inclusive', to detect the inclusive case. This case is then handled in the same way as end_state:1 since the first region is the same. With this fix, __mtrr_type_lookup() handles the inclusive case properly. Signed-off-by:
-
Toshi Kani authored
Simplify the conditions selecting HAVE_ARCH_HUGE_VMAP since X86_PAE depends on X86_32 already. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 25 May, 2015 1 commit
-
-
Linus Torvalds authored
-
- 24 May, 2015 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of five fixes: Two MAINTAINER email updates (urgent because the non-avagotech emails will start bouncing) an lpfc big endian oops fix, a 256 byte sector hang fix (to eliminate 256 byte sectors) and a storvsc fix which could cause test unit ready failures on bringup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: Revise lpfc maintainers for Avago Technologies ownership of Emulex MAINTAINERS, be2iscsi: change email domain sd: Disable support for 256 byte/sector disks lpfc: Fix breakage on big endian kernels storvsc: Set the SRB flags correctly when no data transfer is needed
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "One more fix from the timer departement: - Handle division of negative nanosecond values proper on 32bit. A recent cleanup wrecked the sign handling of the dividend and dropped the check for negative divisors" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Fix ktime_divns to do signed division -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irqchip fix from Thomas Gleixner: "A fix for a GIC-V3 irqchip regression which prevents some systems from booting" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gicv3-its: ITS table size should not be smaller than PSZ
-
- 23 May, 2015 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull two Ceph fixes from Sage Weil: "These fix an issue with the RBD notifications when there are topology changes in the cluster" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: Revert "libceph: clear r_req_lru_item in __unregister_linger_request()" libceph: request a new osdmap if lingering request maps to no osd
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "I fixed up a regression from 4.0 where conversion between different raid levels would sometimes bail out without converting. Filipe tracked down a race where it was possible to double allocate chunks on the drive. Mark has a fix for fiemap. All three will get bundled off for stable as well" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix regression in raid level conversion Btrfs: fix racy system chunk allocation when setting block group ro btrfs: clear 'ret' in btrfs_check_shared() loop
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Radeon has two displayport fixes, one for a regression. i915 regression flicker fix needed so 4.0 can get fixed. A bunch of msm fixes and a bunch of exynos fixes, these two are probably a bit larger than I'd like, but most of them seems pretty good" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) drm/radeon: fix error flag checking in native aux path drm/radeon: retry dcpd fetch drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova() drm/exynos: dp: Lower level of EDID read success message drm/exynos: cleanup exynos_drm_plane drm/exynos: 'win' is always unsigned drm/exynos: mixer: don't dump registers under spinlock drm/exynos: Consolidate return statements in fimd_bind() drm/exynos: Constify exynos_drm_crtc_ops drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMD drm/exynos: mixer: Constify platform_device_id drm/exynos: mixer: cleanup pixelformat handling drm/exynos: mixer: also allow NV21 for the video processor drm/exynos: mixer: remove buffer count handling in vp_video_buffer() drm/exynos: plane: honor buffer offset for dma_addr drm/exynos: fb: use drm_format_num_planes to get buffer count drm/i915: fix screen flickering drm/msm: fix locking inconsistencies in gpu->destroy() drm/msm/dsi: Simplify the code to get the number of read byte drm/msm: Attach assigned encoder to eDP and DSI connectors ...
-
- 22 May, 2015 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala. 2) Fix neighbour table entry leak in rocker driver, from Ying Xue. 3) Do not emit bonding notifications for unregistered interfaces, from Nicolas Dichtel. 4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent Fourcot. 5) Fix regression in ipv6 multicast filter test, from Henning Rogge. 6) do_replace() in various footables netfilter modules is missing a check for 0 counters in the datastructure provided by the user. Fix from Dave Jones, and found with trinity. 7) Fix RCU bug in packet scheduler classifier module unloads, from Daniel Borkmann. 8) Avoid deadlock in tcp_get_info() by using u64_sync. From Eric Dumzaet. 9) Input packet processing can race with inetdev_destroy() teardown, fix potential OOPS in ip_error() by explicitly testing whether the inetdev is still attached. From Eric W Biederman. 10) MLDv2 parser in bridge multicast code breaks too early while parsing. Fix from Thadeu Lima de Souza Cascardo. 11) Asking for settings on non-zero PHYID doesn't work because we do not import the command structure from the user and use the PHYID provided there. Fix from Arun Parameswaran. 12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich. 13) Missing NF_TABLES depends for TPROXY etc can cause build failures, fix from Florian Westphal. 14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly, from Jesper Dangaard Brouer. 15) If netlink autobind retry fails, we have to reset the sockets portid back to zero. From Herbert Xu. 16) VXLAN netns exit code unregisters using wrong device, from John W Linville. 17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from Dmitry Tunin and Wen-chien Jesse Sung. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge: fix lockdep splat net: core: 'ethtool' issue with querying phy settings bridge: fix parsing of MLDv2 reports ARM: zynq: DT: Use the zynq binding with macb net: macb: Disable half duplex gigabit on Zynq net: macb: Document zynq gem dt binding ipv4: fill in table id when replacing a route cdc_ncm: Fix tx_bytes statistics ipv4: Avoid crashing in ip_error tcp: fix a potential deadlock in tcp_get_info() net: sched: fix call_rcu() race on classifier module unloads net: phy: Make sure phy_start() always re-enables the phy interrupts ipv6: fix ECMP route replacement ipv6: do not delete previously existing ECMP routes if add fails Revert "netfilter: bridge: query conntrack about skb dnat" netfilter: ensure number of counters is >0 in do_replace() netfilter: nfnetlink_{log,queue}: Register pernet in first place tcp: don't over-send F-RTO probes tcp: only undo on partial ACKs in CA_Loss net/ipv6/udp: Fix ipv6 multicast socket filter regression ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Three small fixes that have been picked up the last few weeks. Specifically: - Fix a memory corruption issue in NVMe with malignant user constructed request. From Christoph. - Kill (now) unused blk_queue_bio(), dm was changed to not need this anymore. From Mike Snitzer. - Always use blk_schedule_flush_plug() from the io_schedule() path when flushing a plug, fixing a !TASK_RUNNING warning with md. From Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: sched: always use blk_schedule_flush_plug in io_schedule_out nvme: fix kernel memory corruption with short INQUIRY buffers block: remove export for blk_queue_bio -
git://neil.brown.name/mdLinus Torvalds authored
Pull md bugfixes from Neil Brown: "I have a few more raid5 bugfixes pending, but I want them to get a bit more review first. In the meantime: - one serious RAID0 data corruption - caused by recent bugfix that wasn't reviewed properly. - one raid5 fix in new code (a couple more of those to come). - one little fix to stop static analysis complaining about silly rcu annotation" * tag 'md/4.1-rc4-fixes' of git://neil.brown.name/md: md/bitmap: remove rcu annotation from pointer arithmetic. md/raid0: fix restore to sector variable in raid0_make_request raid5: fix broken async operation chain -
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem. The main change is that we tell joydev not to touch "absolute mice", such as VMware virtual mouse, as that produced bad result (cursor stuck in upper right corner) with games" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: smtpe-ts - wait 50mS until polling for pen-up Input: smtpe-ts - use msecs_to_jiffies() instead of HZ Input: joydev - don't classify the vmmouse as a joystick Input: vmmouse - do not reference non-existing version of X driver Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad Input: elantech - fix semi-mt protocol for v3 HW Input: sx8654 - fix memory allocation check
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull another crypto fix from Herbert Xu: "Fix ICV corruption in s390/ghash when the same tfm is used by more than one thread" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s390/ghash - Fix incorrect ghash icv buffer handling.
-
Eric Dumazet authored
Following lockdep splat was reported : [ 29.382286] =============================== [ 29.382315] [ INFO: suspicious RCU usage. ] [ 29.382344] 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 Not tainted [ 29.382380] ------------------------------- [ 29.382409] net/bridge/br_private.h:626 suspicious rcu_dereference_check() usage! [ 29.382455] other info that might help us debug this: [ 29.382507] rcu_scheduler_active = 1, debug_locks = 0 [ 29.382549] 2 locks held by swapper/0/0: [ 29.382576] #0: (((&p->forward_delay_timer))){+.-...}, at: [<ffffffff81139f75>] call_timer_fn+0x5/0x4f0 [ 29.382660] #1: (&(&br->lock)->rlock){+.-...}, at: [<ffffffffa0450dc1>] br_forward_delay_timer_expired+0x31/0x140 [bridge] [ 29.382754] stack backtrace: [ 29.382787] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 [ 29.382838] Hardware name: LENOVO 422916G/LENOVO, BIOS A1KT53AUS 04/07/2015 [ 29.382882] 0000000000000000 3ebfc20364115825 ffff880666603c48 ffffffff81892d4b [ 29.382943] 0000000000000000 ffffffff81e124e0 ffff880666603c78 ffffffff8110bcd7 [ 29.383004] ffff8800785c9d00 ffff88065485ac58 ffff880c62002800 ffff880c5fc88ac0 [ 29.383065] Call Trace: [ 29.383084] <IRQ> [<ffffffff81892d4b>] dump_stack+0x4c/0x65 [ 29.383130] [<ffffffff8110bcd7>] lockdep_rcu_suspicious+0xe7/0x120 [ 29.383178] [<ffffffffa04520f9>] br_fill_ifinfo+0x4a9/0x6a0 [bridge] [ 29.383225] [<ffffffffa045266b>] br_ifinfo_notify+0x11b/0x4b0 [bridge] [ 29.383271] [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383320] [<ffffffffa0450de8>] br_forward_delay_timer_expired+0x58/0x140 [bridge] [ 29.383371] [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383416] [<ffffffff8113a033>] call_timer_fn+0xc3/0x4f0 [ 29.383454] [<ffffffff81139f75>] ? call_timer_fn+0x5/0x4f0 [ 29.383493] [<ffffffff8110a90f>] ? lock_release_holdtime.part.29+0xf/0x200 [ 29.383541] [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383587] [<ffffffff8113a6a4>] run_timer_softirq+0x244/0x490 [ 29.383629] [<ffffffff810b68cc>] __do_softirq+0xec/0x670 [ 29.383666] [<ffffffff810b70d5>] irq_exit+0x145/0x150 [ 29.383703] [<ffffffff8189f506>] smp_apic_timer_interrupt+0x46/0x60 [ 29.383744] [<ffffffff8189d523>] apic_timer_interrupt+0x73/0x80 [ 29.383782] <EOI> [<ffffffff816f131f>] ? cpuidle_enter_state+0x5f/0x2f0 [ 29.383832] [<ffffffff816f131b>] ? cpuidle_enter_state+0x5b/0x2f0 Problem here is that br_forward_delay_timer_expired() is a timer handler, calling br_ifinfo_notify() which assumes either rcu_read_lock() or RTNL are held. Simplest fix seems to add rcu read lock section. Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Reported-by:
Dominick Grift <dac.override@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Arun Parameswaran authored
When trying to configure the settings for PHY1, using commands like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to modify other settings apart from the speed of the PHY1, in the above case. The ethtool seems to query the settings for PHY0, and use this as the base to apply the new settings to the PHY1. This is causing the other settings of the PHY 1 to be wrongly configured. The issue is caused by the '_ethtool_get_settings()' API, which gets called because of the 'ETHTOOL_GSET' command, is clearing the 'cmd' pointer (of type 'struct ethtool_cmd') by calling memset. This clears all the parameters (if any) passed for the 'ETHTOOL_GSET' cmd. So the driver's callback is always invoked with 'cmd->phy_address' as '0'. The '_ethtool_get_settings()' is called from other files in the 'net/core'. So the fix is applied to the 'ethtool_get_settings()' which is only called in the context of the 'ethtool'. Signed-off-by:
Arun Parameswaran <aparames@broadcom.com> Reviewed-by:
Ray Jui <rjui@broadcom.com> Reviewed-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by:
-
Nathan Sullivan authored
Use the new zynq binding for macb ethernet, since it will disable half duplex gigabit like the Zynq TRM says to do. Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
-
