- 12 Mar, 2020 1 commit
-
-
Larry Finger authored
For some unexplained reason, commit d1d1a96b ("rtlwifi: rtl8188ee: Remove local configuration variable") broke at least one system. As the only net effect of the change was to remove 2 bytes from the start of struct phy_status_rpt, this patch adds 2 bytes of padding at the beginning of the struct. Fixes: d1d1a96b ("rtlwifi: rtl8188ee: Remove local configuration variable") Cc: Stable <stable@vger.kernel.org> # V5.4+ Reported-by:
Ashish <ashishkumar.yadav@students.iiserpune.ac.in> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- 10 Mar, 2020 10 commits
-
-
Luca Coelho authored
The current URL mentioned in iwlwifi's W entry is outdated and currently pointing to a dead link. Change it so that it points to the correct Wiki page directly. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes First batch of fixes intended for v5.6 * Fix a locking issue in time events handling; * A fix in rate-scaling; * Fix for a potential NULL pointer deref; * Enable antenna diversity in some devices that were erroneously not doing it; * Allow FW dumps to continue when the FW is stuck; * A fix in the HE capabilities handling; * Another fix for FW dumps where we were reading wrong addresses.
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - Don't schedule OGM for disabled interface, by Sven Eckelmann ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Eric Dumazet authored
Commit e18b353f ("ipvlan: add cond_resched_rcu() while processing muticast backlog") added a cond_resched_rcu() in a loop using rcu protection to iterate over slaves. This is breaking rcu rules, so lets instead use cond_resched() at a point we can reschedule Fixes: e18b353f ("ipvlan: add cond_resched_rcu() while processing muticast backlog") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Dmitry Yakunin authored
In our production environment we have faced with problem that updating classid in cgroup with heavy tasks cause long freeze of the file tables in this tasks. By heavy tasks we understand tasks with many threads and opened sockets (e.g. balancers). This freeze leads to an increase number of client timeouts. This patch implements following logic to fix this issue: аfter iterating 1000 file descriptors file table lock will be released thus providing a time gap for socket creation/deletion. Now update is non atomic and socket may be skipped using calls: dup2(oldfd, newfd); close(oldfd); But this case is not typical. Moreover before this patch skip is possible too by hiding socket fd in unix socket buffer. New sockets will be allocated with updated classid because cgroup state is updated before start of the file descriptors iteration. So in common cases this patch has no side effects. Signed-off-by:
Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Mahesh Bandewar authored
The Rx bound multicast packets are deferred to a workqueue and macvlan can also suffer from the same attack that was discovered by Syzbot for IPvlan. This solution is not as effective as in IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing to a workqueue while macvlan does this way only for the Rx. This fix should address the Rx codition to certain extent. Tx is still suseptible. Tx multicast processing happens when .ndo_start_xmit is called, hence we cannot add cond_resched(). However, it's not that severe since the user which is generating / flooding will be affected the most. Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
If there are substantial number of slaves created as simulated by Syzbot, the backlog processing could take much longer and result into the issue found in the Syzbot report. INFO: rcu_sched detected stalls on CPUs/tasks: (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752) All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0 syz-executor.1 R running task on cpu 1 10984 11210 3866 0x30020008 179034491270 Call Trace: <IRQ> [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline] [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline] [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline] [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline] [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline] [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline] [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline] [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153 RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12 RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000 RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0 RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273 R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8 R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline] [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline] [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline] [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline] [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline] [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline] [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline] [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102 RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12 RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000 RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005 RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000 R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline] [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline] [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f23c69 RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0 RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1 rcu_sched R running task on cpu 1 13048 8 2 0x90000000 179099587640 Call Trace: [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393 Fixes: ba35f858 (“ipvlan: Defer multicast / broadcast processing to a work-queue”) Signed-off-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Mahesh Bandewar authored
IPvlan in L3 mode discards outbound multicast packets but performs the check before ensuring the ether-header is set or not. This is an error that Eric found through code browsing. Fixes: 2ad7bf36 (“ipvlan: Initial check-in of the IPVLAN driver.”) Signed-off-by:
-
Edward Cree authored
It's a resource, not a parameter, so we can't copy it into the new channel's TX queues, otherwise aliasing will lead to resource- management bugs if the channel is subsequently torn down without being initialised. Before the Fixes:-tagged commit there was a similar bug with tsoh_page, but I'm not sure it's worth doing another fix for such old kernels. Fixes: e9117e50 ("sfc: Firmware-Assisted TSO version 2") Suggested-by:
Derek Shute <Derek.Shute@stratus.com> Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
- 09 Mar, 2020 5 commits
-
-
Masanari Iida authored
This patch fix a spelling typo in rds.txt Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Dmitry Yakunin authored
In commit 1ec17dbd ("inet_diag: fix reporting cgroup classid and fallback to priority") croup classid reporting was fixed. But this works only for TCP sockets because for other socket types icsk parameter can be NULL and classid code path is skipped. This change moves classid handling to inet_diag_msg_attrs_fill() function. Also inet_diag_msg_attrs_size() helper was added and addends in nlmsg_new() were reordered to save order from inet_sk_diag_fill(). Fixes: 1ec17dbd ("inet_diag: fix reporting cgroup classid and fallback to priority") Signed-off-by:
-
Remi Pommarel authored
ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that there is no need to manually strip it for such packets. The enhanced DMA descriptors allow to flag LLC packets so that the receiving callback can use that to strip FCS manually or not. On the other hand, normal descriptors do not support that. Thus in order to not truncate LLC packet ACS should be disabled when using normal DMA descriptors. Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Signed-off-by:
-
Eric Dumazet authored
syzbot found an interesting case of the kernel reading an uninit-value [1] Problem is in the handling of ETH_P_WCCP in gre_parse_header() We look at the byte following GRE options to eventually decide if the options are four bytes longer. Use skb_header_pointer() to not pull bytes if we found that no more bytes were needed. All callers of gre_parse_header() are properly using pskb_may_pull() anyway before proceeding to next header. [1] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2303 [inline] BUG: KMSAN: uninit-value in __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 CPU: 1 PID: 11784 Comm: syz-executor940 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 pskb_may_pull include/linux/skbuff.h:2303 [inline] __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 iptunnel_pull_header include/net/ip_tunnels.h:411 [inline] gre_rcv+0x15e/0x19c0 net/ipv6/ip6_gre.c:606 ip6_protocol_deliver_rcu+0x181b/0x22c0 net/ipv6/ip6_input.c:432 ip6_input_finish net/ipv6/ip6_input.c:473 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip6_input net/ipv6/ip6_input.c:482 [inline] ip6_mc_input+0xdf2/0x1460 net/ipv6/ip6_input.c:576 dst_input include/net/dst.h:442 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:306 __netif_receive_skb_one_core net/core/dev.c:5198 [inline] __netif_receive_skb net/core/dev.c:5312 [inline] netif_receive_skb_internal net/core/dev.c:5402 [inline] netif_receive_skb+0x66b/0xf20 net/core/dev.c:5461 tun_rx_batched include/linux/skbuff.h:4321 [inline] tun_get_user+0x6aef/0x6f60 drivers/net/tun.c:1997 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f62d99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000fffedb2c EFLAGS: 00000217 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020002580 RDX: 0000000000000fca RSI: 0000000000000036 RDI: 0000000000000004 RBP: 0000000000008914 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 tun_alloc_skb drivers/net/tun.c:1529 [inline] tun_get_user+0x10ae/0x6f60 drivers/net/tun.c:1843 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: 95f5c64c ("gre: Move utility functions to common headers") Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
-
Jiri Wiesner authored
There is a problem when ipvlan slaves are created on a master device that is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not support unicast address filtering. When an ipvlan device is brought up in ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware address of the vmxnet3 master device to the unicast address list of the master device, phy_dev->uc. This inevitably leads to the vmxnet3 master device being forced into promiscuous mode by __dev_set_rx_mode(). Promiscuous mode is switched on the master despite the fact that there is still only one hardware address that the master device should use for filtering in order for the ipvlan device to be able to receive packets. The comment above struct net_device describes the uc_promisc member as a "counter, that indicates, that promiscuous mode has been enabled due to the need to listen to additional unicast addresses in a device that does not implement ndo_set_rx_mode()". Moreover, the design of ipvlan guarantees that only the hardware address of a master device, phy_dev->dev_addr, will be used to transmit and receive all packets from its ipvlan slaves. Thus, the unicast address list of the master device should not be modified by ipvlan_open() and ipvlan_stop() in order to make ipvlan a workable option on masters that do not support unicast address filtering. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver") Reported-by:
Per Sundstrom <per.sundstrom@redqube.se> Signed-off-by:
Jiri Wiesner <jwiesner@suse.com> Reviewed-by:
-
- 07 Mar, 2020 10 commits
-
-
Jonathan Neuschäfer authored
rhashtable_lookup_get_insert_key doesn't have a parameter `data`. It does have a parameter `key`, however. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jakub Kicinski authored
pkaustub@cisco.com is bouncing, remove it. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Shannon Nelson authored
These are a couple of read locks that should be write locks. Fixes: fbb39807 ("ionic: support sr-iov operations") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
Similar to commit 38f88c45 ("bonding/alb: properly access headers in bond_alb_xmit()"), we need to make sure arp header was pulled in skb->head before blindly accessing it in rlb_arp_xmit(). Remove arp_pkt() private helper, since it is more readable/obvious to have the following construct back to back : if (!pskb_network_may_pull(skb, sizeof(*arp))) return NULL; arp = (struct arp_pkt *)skb_network_header(skb); syzbot reported : BUG: KMSAN: uninit-value in bond_slave_has_mac_rx include/net/bonding.h:704 [inline] BUG: KMSAN: uninit-value in rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] BUG: KMSAN: uninit-value in bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 CPU: 0 PID: 12743 Comm: syz-executor.4 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 bond_slave_has_mac_rx include/net/bonding.h:704 [inline] rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 __bond_start_xmit drivers/net/bonding/bond_main.c:4257 [inline] bond_start_xmit+0x85d/0x2f70 drivers/net/bonding/bond_main.c:4282 __netdev_start_xmit include/linux/netdevice.h:4524 [inline] netdev_start_xmit include/linux/netdevice.h:4538 [inline] xmit_one net/core/dev.c:3470 [inline] dev_hard_start_xmit+0x531/0xab0 net/core/dev.c:3486 __dev_queue_xmit+0x37de/0x4220 net/core/dev.c:4063 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4096 packet_snd net/packet/af_packet.c:2967 [inline] packet_sendmsg+0x8347/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc77ffbbc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fc77ffbc6d4 RCX: 000000000045c479 RDX: 000000000000000e RSI: 00000000200004c0 RDI: 0000000000000003 RBP: 000000000076bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a04 R14: 00000000004cc7b0 R15: 000000000076bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 packet_alloc_skb net/packet/af_packet.c:2815 [inline] packet_snd net/packet/af_packet.c:2910 [inline] packet_sendmsg+0x66a0/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== QorIQ DPAA FMan erratum A050385 workaround Changes in v2: - added CONFIG_DPAA_ERRATUM_A050385 - removed unnecessary parenthesis - changed alignment defines to use only decimal values The patch set implements the workaround for FMan erratum A050385: FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. To reproduce this issue when the workaround is not applied, one needs to ensure the FMan DMA transaction queue is already full when a transaction split occurs so the system must be under high traffic load (i.e. multiple ports at line rate). After the errata occurs, the traffic stops. The only SoC impacted by this is the LS1043A, the other ARM DPAA 1 SoC or the PPC DPAA 1 SoCs do not have this erratum. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. ==================== Signed-off-by: -
Madalin Bucur authored
Align buffers, data start, SG fragment length to avoid DMA splits. These changes prevent the A050385 erratum to manifest itself: FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Detect the presence of the A050385 erratum. Signed-off-by:
-
Madalin Bucur authored
The LS1043A SoC is affected by the A050385 erratum stating that FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak thus stopping further packet processing. Signed-off-by:
-
Madalin Bucur authored
FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Patches to bump position index from sysctl seq_next, from Vasilin Averin. 2) Release flowtable hook from error path, from Florian Westphal. 3) Patches to add missing netlink attribute validation, from Jakub Kicinski. 4) Missing NFTA_CHAIN_FLAGS in nf_tables_fill_chain_info(). 5) Infinite loop in module autoload if extension is not available, from Florian Westphal. 6) Missing module ownership in inet/nat chain type definition. ==================== Signed-off-by:
-
- 06 Mar, 2020 11 commits
-
-
Pablo Neira Ayuso authored
Set owner to THIS_MODULE, otherwise the nft_chain_nat module might be removed while there are still inet/nat chains in place. [ 117.942096] BUG: unable to handle page fault for address: ffffffffa0d5e040 [ 117.942101] #PF: supervisor read access in kernel mode [ 117.942103] #PF: error_code(0x0000) - not-present page [ 117.942106] PGD 200c067 P4D 200c067 PUD 200d063 PMD 3dc909067 PTE 0 [ 117.942113] Oops: 0000 [#1] PREEMPT SMP PTI [ 117.942118] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.6.0-rc3+ #348 [ 117.942133] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 117.942145] RIP: 0010:nf_tables_chain_destroy.isra.0+0x94/0x15a [nf_tables] [ 117.942149] Code: f6 45 54 01 0f 84 d1 00 00 00 80 3b 05 74 44 48 8b 75 e8 48 c7 c7 72 be de a0 e8 56 e6 2d e0 48 8b 45 e8 48 c7 c7 7f be de a0 <48> 8b 30 e8 43 e6 2d e0 48 8b 45 e8 48 8b 40 10 48 85 c0 74 5b 8b [ 117.942152] RSP: 0018:ffffc9000015be10 EFLAGS: 00010292 [ 117.942155] RAX: ffffffffa0d5e040 RBX: ffff88840be87fc2 RCX: 0000000000000007 [ 117.942158] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffffffffa0debe7f [ 117.942160] RBP: ffff888403b54b50 R08: 0000000000001482 R09: 0000000000000004 [ 117.942162] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8883eda7e540 [ 117.942164] R13: dead000000000122 R14: dead000000000100 R15: ffff888403b3db80 [ 117.942167] FS: 0000000000000000(0000) GS:ffff88840e4c0000(0000) knlGS:0000000000000000 [ 117.942169] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.942172] CR2: ffffffffa0d5e040 CR3: 00000003e4c52002 CR4: 00000000001606e0 [ 117.942174] Call Trace: [ 117.942188] nf_tables_trans_destroy_work.cold+0xd/0x12 [nf_tables] [ 117.942196] process_one_work+0x1d6/0x3b0 [ 117.942200] worker_thread+0x45/0x3c0 [ 117.942203] ? process_one_work+0x3b0/0x3b0 [ 117.942210] kthread+0x112/0x130 [ 117.942214] ? kthread_create_worker_on_cpu+0x40/0x40 [ 117.942221] ret_from_fork+0x35/0x40 nf_tables_chain_destroy() crashes on module_put() because the module is gone. Fixes: d164385e ("netfilter: nat: add inet family nat support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Luca Coelho authored
We were erroneously only setting the tx_with_siso_diversity flag in the Qu B-step configurations for AX101 devices, though we should do it on all configurations. Add the flag to the other two configurations, namely Qu C-step and QuZ. Signed-off-by:
-
Ilan Peer authored
The TLC configuration did not take into consideration the station's SMPS configuration, and thus configured rates for 2 NSS even if static SMPS was reported by the station. Fix this. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Luca Coelho authored
If the firmware is in a bad state or not initialized fully, sending the DBGC_SUSPEND_RESUME command fails but we can still collect logs. Instead of aborting the entire dump process, simply ignore the error. By removing the last callpoint that was checking the return value, we can also convert the function to return void. Signed-off-by:
-
Mordechay Goodstein authored
The TLV offset is only used to read registers, while the offset used for the FIFO addresses are hard coded in the driver and not given by the TLV. If we try to apply the TLV offset when reading the FIFOs, we'll read from invalid addresses, causing the driver to hang. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: 8d7dea25 ("iwlwifi: dbg_ini: implement Rx fifos dump") Signed-off-by:
-
Luca Coelho authored
We were erroneously checking the length of the tlv instead of checking the pointer returned by kmemdup() when allocating dbg_conf_tlv[]. This was probably a typo. Fix it by checking the returned pointer instead of the length. Reported-by:
Markus Elfring <Markus.Elfring@web.de> Signed-off-by:
-
Mordechay Goodstein authored
The AP may set the LDPC capability only in HE (IEEE80211_HE_PHY_CAP1), but we were checking it only in the HT capabilities. If we don't use this capability when required, the DSP gets the wrong configuration in HE and doesn't work properly. Signed-off-by:
-
Avraham Stern authored
When receiving a session protection end notification, the time event data is cleared without holding the required lock. Fix it. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Paolo Abeni authored
Currently passive MPTCP socket can skip including the DACK option - if the peer sends data before accept() completes. The above happens because the msk 'can_ack' flag is set only after the accept() call. Such missing DACK option may cause - as per RFC spec - unwanted fallback to TCP. This change addresses the issue using the key material available in the current subflow, if any, to create a suitable dack option when msk ack seq is not yet available. v1 -> v2: - adavance the generated ack after the initial MPC packet Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
This is similar to commit 674d9de0 ("NFC: Fix possible memory corruption when handling SHDLC I-Frame commands") and commit d7ee81ad ("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which added range checks on "pipe". The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work(). It's in the 0-255 range. We're using it as the array index into the hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members. Fixes: 118278f2 ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jiang Lidong authored
When local NET_RX backlog is full due to traffic overrun, peer veth tx_dropped counter increases. At that time, list local veth stats, rx_dropped has double value of peer tx_dropped, even bigger than transmit packets by peer. In NET_RX softirq process, if any packet drop case happens, it increases dev's rx_dropped counter and returns NET_RX_DROP. At veth tx side, it records any error returned from peer netif_rx into local dev tx_dropped counter. In veth get stats process, it puts local dev rx_dropped and peer dev tx_dropped into together as local rx_drpped value. So that it shows double value of real dropped packets number in this case. This patch ignores peer tx_dropped when counting local rx_dropped, since peer tx_dropped is duplicated to local rx_dropped at most cases. Signed-off-by:
Jiang Lidong <jianglidong3@jd.com> Signed-off-by:
-
- 05 Mar, 2020 3 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Second set of fixes for v5.6. Only two small fixes this time. iwlwifi * fix another initialisation regression with 3168 devices mt76 * fix memory corruption with too many rx fragments ==================== Signed-off-by:
-
Tom Zhao authored
We now ignore the "completion" event when using tx queue timestamping, and only pay attention to the two (high and low) timestamp events. The NIC will send a pair of timestamp events for every packet transmitted. The current firmware may merge the completion events, and it is possible that future versions may reorder the completion and timestamp events. As such the completion event is not useful. Without this patch in place a merged completion event on a queue with timestamping will cause a "spurious TX completion" error. This affects SFN8000-series adapters. Signed-off-by:
Tom Zhao <tzhao@solarflare.com> Acked-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Jian Shen authored
When fibre port supports auto-negotiation, the IMP(Intelligent Management Process) processes the speed of auto-negotiation and the user's speed separately. For below case, the port will get a not link up problem. step 1: disables auto-negotiation and sets speed to A, then the driver's MAC speed will be updated to A. step 2: enables auto-negotiation and MAC gets negotiated speed B, then the driver's MAC speed will be updated to B through querying in periodical task. step 3: MAC gets new negotiated speed A. step 4: disables auto-negotiation and sets speed to B before periodical task query new MAC speed A, the driver will ignore the speed configuration. This patch fixes it by skipping speed and duplex checking when fibre port supports auto-negotiation. Fixes: 22f48e24 ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
