- 14 Apr, 2022 16 commits
-
-
Helge Deller authored
This reverts commit d6cd978f. It has been solved differently already. Signed-off-by:
Helge Deller <deller@gmx.de> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220210065824.368355-1-zhouzhouyi@gmail.com
-
Zhouyi Zhou authored
In function do_remove_conflicting_framebuffers, if device is NULL, there will be null pointer reference. The patch add a check to the if expression. Signed-off-by:
Zhouyi Zhou <zhouzhouyi@gmail.com> Acked-by:
-
Yang Guang authored
Use sysfs_emit instead of scnprintf or sprintf. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Yang Guang <yang.guang5@zte.com.cn> Signed-off-by:
-
Imre Deak authored
Factor out from drm_dp_dpcd_read() a function to probe a DPCD address with a 1-byte read access. This will be needed by the next patch doing a read from an LTTPR address, which must happen without the preceding wake-up read in drm_dp_dpcd_read(). While at it add tracing for the 1 byte read even if the read was successful. v2: Add a probe function instead of exporting drm_dp_dpcd_access(). (Jani) v3: Add tracing for the 1-byte read even if the read was successful. (Khaled) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411132539.984647-1-imre.deak@intel.com
-
Jani Nikula authored
Add some helpers to figure out the EDID extension block count, block count, size, pointers to blocks. Unfortunately, we'll need to cast away the const in a few places where we actually need to access the data. v3: fix (!edid_extension_block_count(edid) == 0) (kernel test robot) v2: fix s/j/i/ introduced in a rebase Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dc7b0850293d837439fb3914c8a9d81e39018b4b.1649685475.git.jani.nikula@intel.com
-
Jani Nikula authored
This will be useful in the future. Use fail label for fail exit. Signed-off-by:
-
Jani Nikula authored
We don't need override as a variable for anything. Signed-off-by:
-
Jani Nikula authored
Use the EDID block read helper also for extension block reads, making edid_block_read() the only place with the read retry logic. Note: We observe that drm_do_get_edid() does not use invalid extension blocks to flag the EDID as corrupt. Signed-off-by:
-
Jani Nikula authored
Convert drm_do_get_edit() from the base block read helper to the generic block read helper. There's quite a bit going on here, as the corrupt and null EDID information is moved back to the caller. As we see, they were not all that clear to begin with, and this change underlines that. Signed-off-by:
-
Jani Nikula authored
We have an abstraction for the EDID base block read, yet duplicating the retries and error handling for extension block reads. Introduce a more generic EDID block read helper. Switch to the helper piecemeal, starting with drm_edid_get_panel_id(), which doesn't need or have access to the connector anyway. The subtle change is switching from drm_edid_block_valid() to edid_block_check(). We also status print once, not for every attempt. Signed-off-by:
-
Jani Nikula authored
Make the callback a bit easier on the eye. Signed-off-by:
-
Jani Nikula authored
Avoid casting here and there, and make it const. Signed-off-by:
-
Jani Nikula authored
Unify debug log dumping. There's duplication in the error paths for EDID block validity checks, but this should be neglible. Signed-off-by:
-
Jani Nikula authored
Split out a function to log EDID block status. The printouts get changed slightly. Unfortunately, not all users will have struct drm_device available, so we convert to pr_* debug logging instead of drm device based logging. v2: Complain more loudly about unknown status codes (Ville) Signed-off-by:
-
Jani Nikula authored
We have the check function, have it also detect blocks that are all zero instead of leaving that to callers. Signed-off-by:
-
Jani Nikula authored
As edid_is_zero() is only ever used on EDID blocks, convert it to edid_block_is_zero() with implicit block size. Signed-off-by:
-
- 13 Apr, 2022 6 commits
-
-
Daniel Vetter authored
I messed up the delayed takover path in the locking conversion in 6e7da3af ("fbcon: Move console_lock for register/unlink/unregister"). If CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is enabled, fbcon take-over doesn't take place when calling fbcon_fb_registered(). Instead, is deferred using a workqueue and its fbcon_register_existing_fbs() function calls to fbcon_fb_registered() again for each registered fbcon fb. This leads to the console_lock tried to be held twice, causing a deadlock. Fix it by re-extracting the lockless function and using it in the delayed takeover path, where we need to hold the lock already to iterate over the list of already registered fb. Well the current code still is broken in there (since the list is protected by a registration_lock, which we can't take here because it nests the other way round with console_lock), but in the future this will be a list protected by console_lock when this is all sorted out. While reviewing the broken commit I realized that I've left some outdated comments about the locking behind. Fix those too. v2: Improve commit message (Javier) Reported-by:
Nathan Chancellor <nathan@kernel.org> Tested-by:
Javier Martinez Canillas <javierm@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Fixes: 6e7da3af ("fbcon: Move console_lock for register/unlink/unregister") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Du Cheng <ducheng2@gmail.com> Cc: Claudio Suarez <cssk@net-c.es> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Matthew Wilcox <willy@infradead.org> Cc: Zheyu Ma <zheyuma97@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Helge Deller <deller@gmx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220413082128.348186-1-daniel.vetter@ffwll.ch
-
Marek Vasut authored
This driver currently rewrites bus_flags based solely on the value of DT property 'data-mirror' and ignores bus_flags which might have been set in DT panel-timing node. Specificaly, the 'de-active' DT property sets DRM_BUS_FLAG_DE_ bus_flags. Since of_get_drm_panel_display_mode() conveniently parses the bus_flags out of DT panel-timing property, just ORR them with bus_flags inferred from 'data-mirror' DT property and use the result as panel bus_flags. This fixes handling of panels with 'panel-timing { de-active = <1>; };'. Reviewed-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-2-marex@denx.de
-
Marek Vasut authored
The mode parsing is currently implemented in three steps: of_get_display_timing() - DT panel-timing to struct display_timing videomode_from_timing() - struct display_timing to struct videomode drm_display_mode_from_videomode() - struct videomode to struct drm_display_mode Replace all that with simple of_get_drm_panel_display_mode() call, which already populates struct drm_display_mode and then duplicate that mode in panel_lvds_get_modes() each time, since the mode does not change. Nice bonus is the bus_flags parsed by of_get_drm_panel_display_mode() out of panel-timing DT node, which is used in subsequent patch to fix handling of 'de-active' DT property. Tested-by:
-
Marek Vasut authored
To make debugging easier, convert driver to regmap. Implement read and write regmap tables for known registers, keep all known register readable and mark those which are obviously read-only as not writeable. Use common I2C regmap for the I2C configuration, implement custom regmap bus for DSI configuration. The later is mandatory as this chip requires one extra byte set to read access length between register address and data. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de
-
Christian König authored
Update the kerneldoc for the members as well. Signed-off-by:
Christian König <christian.koenig@amd.com> Fixes: b0e2c9ea ("drm/ttm: allow bulk moves for all domains") Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220413091242.638413-1-christian.koenig@amd.com
-
Matthew Auld authored
It looks like we still need to call dma_fence_put() on the man->move, otherwise we just end up leaking it, leading to fireworks later. v2(Daniel): - Simplify the function tail Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5689 Fixes: 8bb31587 ("drm/ttm: remove bo->moving") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
- 12 Apr, 2022 4 commits
-
-
Changcheng Deng authored
Use min() in order to make code cleaner. Reported-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Matthew Auld authored
If we hit the sync case, like when skipping clearing for kernel internal objects, or when falling back to cpu clearing, like in i915, we end up trying to add a NULL fence, but with some recent changes in this area this now just results in NULL deref in dma_resv_add_fence: <1>[ 5.466383] BUG: kernel NULL pointer dereference, address: 0000000000000008 <1>[ 5.466384] #PF: supervisor read access in kernel mode <1>[ 5.466385] #PF: error_code(0x0000) - not-present page <6>[ 5.466386] PGD 0 P4D 0 <4>[ 5.466387] Oops: 0000 [#1] PREEMPT SMP NOPTI <4>[ 5.466389] CPU: 5 PID: 267 Comm: modprobe Not tainted 5.18.0-rc2-CI-CI_DRM_11481+ #1 <4>[ 5.466391] RIP: 0010:dma_resv_add_fence+0x63/0x260 <4>[ 5.466395] Code: 38 85 c0 0f 84 df 01 00 00 0f 88 e8 01 00 00 83 c0 01 0f 88 df 01 00 00 8b 05 35 89 10 01 49 8d 5e 68 85 c0 0f 85 45 01 00 00 <48> 8b 45 08 48 3d c0 a5 0a 82 0f 84 5c 01 00 00 48 3d 60 a5 0a 82 <4>[ 5.466396] RSP: 0018:ffffc90000e974f8 EFLAGS: 00010202 <4>[ 5.466397] RAX: 0000000000000001 RBX: ffff888123e88b28 RCX: 00000000ffffffff <4>[ 5.466398] RDX: 0000000000000001 RSI: ffffffff822e4f50 RDI: ffffffff8233f087 <4>[ 5.466399] RBP: 0000000000000000 R08: ffff8881313dbc80 R09: 0000000000000001 <4>[ 5.466399] R10: 0000000000000001 R11: 00000000da354294 R12: 0000000000000000 <4>[ 5.466400] R13: ffff88810927dc58 R14: ffff888123e88ac0 R15: ffff88810a88d600 <4>[ 5.466401] FS: 00007f5fa1193540(0000) GS:ffff88845d880000(0000) knlGS:0000000000000000 <4>[ 5.466402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 5.466402] CR2: 0000000000000008 CR3: 0000000106dd6003 CR4: 00000000003706e0 <4>[ 5.466403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[ 5.466404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4>[ 5.466404] Call Trace: <4>[ 5.466405] <TASK> <4>[ 5.466406] ttm_bo_move_accel_cleanup+0x62/0x270 [ttm] <4>[ 5.466411] ? i915_rsgt_from_buddy_resource+0x185/0x1e0 [i915] <4>[ 5.466529] i915_ttm_move+0xfd/0x430 [i915] <4>[ 5.466833] ? dma_resv_reserve_fences+0x4e/0x320 <4>[ 5.466836] ? ttm_bo_add_move_fence.constprop.20+0xf7/0x140 [ttm] <4>[ 5.466841] ttm_bo_handle_move_mem+0xa1/0x140 [ttm] <4>[ 5.466845] ttm_bo_validate+0xee/0x160 [ttm] <4>[ 5.466849] __i915_ttm_get_pages+0x4f/0x210 [i915] <4>[ 5.466976] i915_ttm_get_pages+0xad/0x140 [i915] <4>[ 5.467094] ____i915_gem_object_get_pages+0x32/0xf0 [i915] <4>[ 5.467210] __i915_gem_object_get_pages+0x89/0xa0 [i915] <4>[ 5.467323] i915_vma_get_pages+0x114/0x1d0 [i915] <4>[ 5.467446] i915_vma_pin_ww+0xd3/0xa90 [i915] <4>[ 5.467570] i915_vma_pin.constprop.10+0x119/0x1b0 [i915] <4>[ 5.467700] ? __mutex_unlock_slowpath+0x3e/0x2b0 <4>[ 5.467704] intel_alloc_initial_plane_obj.isra.6+0x1a9/0x390 [i915] <4>[ 5.467833] intel_crtc_initial_plane_config+0x83/0x340 [i915] In the ttm_bo_move_sync_cleanup() case it seems we only really care about calling ttm_bo_wait_free_node(), so let's instead just call that directly. Signed-off-by:
-
Ville Syrjälä authored
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Signed-off-by:Andrzej Hajda <andrzej.hajda@intel.com>
-
Ville Syrjälä authored
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head, or that we aren't copying over another mode's list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Signed-off-by:
-
- 11 Apr, 2022 9 commits
-
-
Jiasheng Jiang authored
The return value of kzalloc() needs to be checked. To avoid use of null pointer '&state->base' in case of the failure of alloc. Fixes: 99665d07 ("drm: mali-dp: add malidp_crtc_state struct") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by:
Brian Starkey <brian.starkey@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211214100837.46912-1-jiasheng@iscas.ac.cn
-
Robin Murphy authored
iommu_get_domain_for_dev() is already perfectly happy to return NULL if the given device has no IOMMU. Drop the unnecessary check. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Liviu Dudau authored
If drm_universal_plane_init() fails early we jump to the common cleanup code that calls komeda_plane_destroy() which in turn could access the uninitalised drm_plane and crash. Return early if an error is detected without going through the common code. Reported-by:
Steven Price <steven.price@arm.com> Reviewed-by:
-
Zhou Qingyang authored
In komeda_plane_add(), komeda_get_layer_fourcc_list() is assigned to formats and used in drm_universal_plane_init(). drm_universal_plane_init() passes formats to __drm_universal_plane_init(). __drm_universal_plane_init() further passes formats to memcpy() as src parameter, which could lead to an undefined behavior bug on failure of komeda_get_layer_fourcc_list(). Fix this bug by adding a check of formats. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DRM_KOMEDA=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 61f1c4a8 ("drm/komeda: Attach komeda_dev to DRM-KMS") Signed-off-by:
Zhou Qingyang <zhou1615@umn.edu> Signed-off-by:
-
Paul Boddie authored
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780 HDMI support. This requires a new driver, plus device tree and configuration modifications. Here we add Kconfig DRM_INGENIC_DW_HDMI, Makefile and driver code. Note that there is no hpd-gpio installed on the CI20 board HDMI connector. Hence there is no hpd detection by the connector driver and we have to enable polling in the dw-hdmi core driver. For that we need to set .poll_enabled but that struct component can only be accessed by core code. Hence we use the public setter function drm_kms_helper_hotplug_event() introduced before. Also note that we disable Color Space Conversion since it is not working on jz4780. Signed-off-by:
Paul Boddie <paul@boddie.org.uk> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/e5cdf9cd44bde52cce379cc830f2d6117ea15c32.1649330171.git.hns@goldelico.com
-
Paul Cercueil authored
The .atomic_get_input_bus_fmts() callback of our top bridge should return the possible input formats for a given output format. If the requested output format is not supported, then NULL should be returned, otherwise the bus format negociation will end with a bus format that the encoder does not support. Signed-off-by:
-
H. Nikolaus Schaller authored
"hdmi-connector.yaml" bindings defines an optional property "ddc-en-gpios" for a single gpio to enable DDC operation. Usually this controls +5V power on the HDMI connector. This +5V may also be needed for HPD. This was not reflected in code but is needed to make the CI20 board work. Now, the driver activates the ddc gpio after probe and deactivates after remove so it is "almost on". But only if this driver is loaded (and not e.g. blacklisted as module). Signed-off-by:
-
Christian König authored
That should have been max, not min. Signed-off-by:
-
Arunpravin Paneer Selvam authored
Add a simple check to reject any size not aligned to the min_page_size. when size is not aligned to min_page_size, driver module should handle in their own way either to round_up() the size value to min_page_size or just to enable WARN_ON(). If we dont handle the alignment properly, we may hit the following bug, Unigine Heaven has allocation requests for example required pages are 257 and alignment request is 256. To allocate the left over 1 page, continues the iteration to find the order value which is 0 and when it compares with min_order = 8, triggers the BUG_ON(order < min_order). v2: add more commit description v3: remove WARN_ON() Signed-off-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Suggested-by:
-
- 08 Apr, 2022 5 commits
-
-
Maxime Ripard authored
When debugging, finding out what muxing decisions were made and what the actual core clock rate is is always useful, so let's add some more messages. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20220328153659.2382206-7-maxime@cerno.tech
-
Maxime Ripard authored
The documentation explicitly states we must prevent the output 2 and 3 from feeding from the same HVS channel. Let's add a warning to make some noise if we ever find ourselves in such a case. Signed-off-by:
-
Maxime Ripard authored
We use the channel from our vc4_crtc_state structure in multiple places, let's store it in a local variable to make it cleaner. Signed-off-by:
-
Maxime Ripard authored
If we use a format that has padding instead of the alpha component (such as XRGB8888), it appears that the Transposer will fill the padding to 0, disregarding what was stored in the input buffer padding. This leads to issues with IGT, since it will set the padding to 0xff, but will then compare the CRC of the two frames which will thus fail. Another nice side effect is that it is now possible to just use the buffer as ARGB. Fixes: 008095e0 ("drm/vc4: Add support for the transposer block") Signed-off-by:
-
Maxime Ripard authored
The TXP_VSTART_AT_EOF will generate a second VSTART signal to the HVS. However, the HVS waits for VSTART to enable the FIFO and will thus start filling the FIFO before the start of the frame. This leads to corruption at the beginning of the first frame, and content from the previous frame at the beginning of the next frames. Since one VSTART is enough, let's get rid of it. Fixes: 008095e0 ("drm/vc4: Add support for the transposer block") Signed-off-by:
-
