This reverts commit 6646b95a.

Stephen reports that it breaks the build for him so revert it for now.

Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220520194637.03824f7f@canb.auug.org.auSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'icc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 5.19

These are the interconnect changes for the 5.19-rc1 merge window
consisting of driver updates.

 Driver changes:
 - New driver for SC8280XP
 - New driver for SDX65
 - SC8180X driver fixes
 - Constify various data structures in that are never modified
 - Fix clock rate caching in RPM drivers.
 - Misc fixes and clean-ups
Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
  dt-bindings: interconnect: Remove sc7180/sdx55 ipa compatibles
  interconnect: qcom: sc8180x: Reformat node and bcm definitions
  interconnect: qcom: sc8180x: Mark some BCMs keepalive
  interconnect: qcom: sc8180x: Fix QUP0 nodes
  interconnect: qcom: sc8180x: Modernize sc8180x probe
  dt-bindings: interconnect: Add SC8180X QUP0 virt provider
  interconnect: qcom: icc-rpm: Cache every clock rate
  interconnect: qcom: icc-rpm: Fix for cached clock rate
  interconnect: qcom: sc8280xp: constify qcom_icc_bcm pointers
  interconnect: qcom: sc8280xp: constify icc_node pointers
  interconnect: qcom: sc8280xp: constify qcom_icc_desc
  interconnect: qcom: Add SDX65 interconnect provider driver
  dt-bindings: interconnect: Add Qualcomm SDX65 DT bindings
  interconnect: qcom: constify qcom_icc_bcm pointers
  interconnect: qcom: constify icc_node pointers
  interconnect: qcom: constify qcom_icc_desc
  interconnect: qcom: Add SC8280XP interconnect provider
  dt-bindings: interconnect: qcom: Add sc8280xp binding

speakupmap.h was not actually intended to be source code, speakupmap.map
is.

This resurrects the makemapdata.c and genmap.c tools to generate
speakupmap.h automatically from the input and speakup headers, and the
speakupmap.map keyboard mapping source file.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220515230358.ikwt2kspiwvv5cf4@beginSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per the current implementation only single callback data gets saved per
event, driver is throwing an error if try to register multiple callback for
same event. So at time of unregistration of any event required things are
event details and callback handler as parameter of xlnx_unregister_event().

As part of adding support of multiple callbacks for same event also require
change in prototype of xlnx_unregister_event().
During unregistration of any events, now required things are event details,
callback handler and agent's private data as parameter of
xlnx_unregister_event().

Also modify the usage of xlnx_unregister_event() in xilinx/zynqmp_power.c
driver as per new implementation.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-3-abhyuday.godhasara@xilinx.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per the current implementation of only single callback data gets
saved per event, driver is throwing an error if try to register multiple
callback for same event.

Add support of multiple callbacks data for same event. So agent can
register for same event with multiple callbacks. Here event management
driver will store the callbacks as list in Hash table entry for that event.

Here each callback data contain 2 element as callback handler and private
data of agent driver.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-2-abhyuday.godhasara@xilinx.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is another instance of incorrect use of list iterator and
checking it for NULL.

The list iterator value 'map' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty (in this case, the
check 'if (!map) {' will always be false and never exit as expected).

To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'map' as a dedicated pointer to
point to the found element.

Without this patch, Kernel crashes with below trace:

Unable to handle kernel access to user memory outside uaccess routines
 at virtual address 0000ffff7fb03750
...
Call trace:
 fastrpc_map_create+0x70/0x290 [fastrpc]
 fastrpc_req_mem_map+0xf0/0x2dc [fastrpc]
 fastrpc_device_ioctl+0x138/0xc60 [fastrpc]
 __arm64_sys_ioctl+0xa8/0xec
 invoke_syscall+0x48/0x114
 el0_svc_common.constprop.0+0xd4/0xfc
 do_el0_svc+0x28/0x90
 el0_svc+0x3c/0x130
 el0t_64_sync_handler+0xa4/0x130
 el0t_64_sync+0x18c/0x190
Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6)
---[ end trace 0000000000000000 ]---

Fixes: 5c1b97c7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP")
Cc: stable@vger.kernel.org
Reported-by: Jan Jablonsky <jjablonsky@snapchat.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220518152353.13058-1-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alcor_pci doesn't set driver data to NULL and clear pci master when
probe fails. Doesn't clear pci master from remove interface. Clearing
pci master is necessary to disable bus mastering and prevent DMAs after
driver removal.

Fix alcor_pci_probe() to set driver data to NULL and clear pci master
from its error path. Fix alcor_pci_remove() to clear pci master.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220517203630.45232-1-skhan@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

attr->test check is not needed when !attr->test is false.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220511064622.3399164-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We can get "failed to disable" clock_unprepare warnings on unbind at least
for the serial console device if the unbind is done before the device has
been idled.

As some devices are using deferred idle, we must check the status for
pending idle work to idle the device.

Fixes: 76f0f772 ("bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init")
Cc: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512053021.61650-1-tony@atomide.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix this issue by calling kobject_put().

Fixes: 948af1f0 ("firmware: Basic dmi-sysfs support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511071421.9769-1-linmq006@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If kzalloc() fails, iounmap() need be called in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220511064506.3398512-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

softsynth_probe misses a call misc_deregister() in an error path, this
patch fixes that.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Link: https://lore.kernel.org/r/20220511032937.2736738-1-zhengbin13@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The print function dev_err() is redundant because
platform_get_irq_byname() already prints an error.

Eliminate the follow coccicheck warning:
./drivers/slimbus/qcom-ctrl.c:514:2-9: line 514 is redundant because
platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220510095205.337-3-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform_get_irq() returns non-zero IRQ number on success,
negative error number on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: ad7fcbc3 ("slimbus: qcom: Add Qualcomm Slimbus controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220510095205.337-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following coccicheck warning:

drivers/comedi/drivers.c:857:12-13: WARNING opportunity for min().

min() macro is defined in include/linux/minmax.h. It avoids multiple
evaluations of the arguments when non-constant and performs strict
type-checking.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220513071608.49047-1-guozhengkui@vivo.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When COMPILED_SOURCE is set, running

  make ARCH=x86_64 COMPILED_SOURCE=1 cscope tags

could throw the following errors:

scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
cscope: no source files found
scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
ctags: No files specified. Try "ctags --help".

This is most likely to happen when the kernel is configured to build a
large number of modules, which has the consequence of passing too many
arguments when calling 'realpath' in 'all_compiled_sources()'.

Let's improve this by invoking 'realpath' through 'xargs', which takes
care of properly limiting the argument list.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20220516234646.531208-1-cristian.ciocaltea@collabora.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder_inner_proc_lock(thread->proc) is a spin lock, copy_to_user can't
be called with in this lock.

Copy it as a local variable to fix it.

Fixes: bd32889e ("binder: add BINDER_GET_EXTENDED_ERROR ioctl")
Reported-by: syzbot+46fff6434a7f968ecb39@syzkaller.appspotmail.com
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220518011754.49348-1-schspa@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 9474be34 ("binder: add failed transaction logging info")
dereferences target_{proc,thread} after they have been potentially
freed by binder_proc_dec_tmpref() and binder_thread_dec_tmpref().

This patch delays the release of the two references after their last
usage. Fixes the following two errors reported by smatch:

  drivers/android/binder.c:3562 binder_transaction() error: dereferencing freed memory 'target_proc'
  drivers/android/binder.c:3563 binder_transaction() error: dereferencing freed memory 'target_thread'

Fixes: 9474be34 ("binder: add failed transaction logging info")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220517185817.598872-1-cmllamas@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure we use unsigned format specifier %u for binder commands as
most of them are encoded above INT_MAX. This prevents negative values
when logging them as in the following case:

[  211.895781] binder: 8668:8668 BR_REPLY 258949 0:0, cmd -2143260157 size 0-0 ptr 0000006e766a8000-0000006e766a8000
Acked-by: Todd Kjos <tkjos@google.com>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220509231901.3852573-1-cmllamas@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next

Kees writes:

lkdtm updates for -next

- Test for new usercopy memory regions
- avoid GCC 12 warnings
- update expected CONFIGs for selftests

* tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  lkdtm/heap: Hide allocation size from -Warray-bounds
  selftests/lkdtm: Add configs for stackleak and "after free" tests
  lkdtm/usercopy: Check vmalloc and >0-order folios
  lkdtm/usercopy: Rename "heap" to "slab"
  lkdtm: cfi: Fix type width for masking PAC bits

Merge tag 'fpga-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next

Moritz writes:

FPGA Manager changes for 5.19-rc1

FPGA Manager

- My change moves the linux-fpga repository to a shared
  location w/ shared responsibilities between maintainers
- Nava's changes fix coding style and kernel-docs

DFL

- Matthew's change allows ports to be linked to FMEs.
- Tianfei's changes clean up some documentation and
  ensure the feature type is checked before parsing IRQs

All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
  fpga: dfl: Allow Port to be linked to FME's DFL
  Documentation: fpga: dfl: add link address of feature id table
  fpga: dfl: check feature type before parse irq info
  fpga: fpga-region: fix kernel-doc formatting issues
  fpga: Use tab instead of space indentation
  fpga: fpga-mgr: fix kernel-doc warnings
  fpga: fix for coding style issues
  MAINTAINERS: Update linux-fpga repository location

Merge tag 'coresight-next-v5.19' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux into char-misc-next

Mathieu writes:

Coresight changes for v5.19

This pull request includes:

- Work to uniformise access to the ETMv4 registers, making it easier to
look for and change register accesses.

- A correction to a probing failure when looking for links between devices.

- The replacement of a call to mutex_lock() with a mutex_trylock() in the panic
notifier of the cpu-debug infrastructure to avoid a possible deadlock.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

* tag 'coresight-next-v5.19' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux:
  coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
  coresight: core: Fix coresight device probe failure issue
  coresight: etm4x: Cleanup TRCRSCTLRn register accesses
  coresight: etm4x: Cleanup TRCBBCTLR register accesses
  coresight: etm4x: Cleanup TRCSSPCICRn register accesses
  coresight: etm4x: Cleanup TRCSSCCRn and TRCSSCSRn register accesses
  coresight: etm4x: Cleanup TRCACATRn register accesses
  coresight: etm3x: Cleanup ETMTECR1 register accesses
  coresight: etm4x: Cleanup TRCVICTLR register accesses
  coresight: etm4x: Cleanup TRCSTALLCTLR register accesses
  coresight: etm4x: Cleanup TRCEVENTCTL1R register accesses
  coresight: etm4x: Cleanup TRCCONFIGR register accesses
  coresight: etm4x: Cleanup TRCIDR5 register accesses
  coresight: etm4x: Cleanup TRCIDR4 register accesses
  coresight: etm4x: Cleanup TRCIDR3 register accesses
  coresight: etm4x: Cleanup TRCIDR2 register accesses
  coresight: etm4x: Cleanup TRCIDR0 register accesses

Merge tag 'extcon-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v5.19

Detailed description for this pull request:
1. update extcon core driver
- extcon_get_extcon_dev() has been almost used to get the extcon device
on booting time. If extcon provider driver is probed at late time,
the extcon consumer driver get the -EPROBE_DEFER return value.
It requires the inefficient handling code of -EPROBE_DEFER.
Instead, extcon_get_extcon_dev() will return -EPROBE_DEFER
if the required extcon device is none. It makes the extcon consumer driver
to be simplified when getting extcon device.
- Register device after dev_set_drvdata because of accessing
the sysfs attributes at timing of between drv_set_data and device_register.
- Fix some kernel-doc comments of extcon functions.

2. update extcon provider driver
- Update extcon-intel-int3496.c
: Add support for controlling vbus power via regulator and support
to the extcon-intel-int3496.c driver to bind to devices without
an ACPi companion. And fix the minor clean-up.
- Use struct_size() helper on extcon-usbc-cros-ec.c
- Remove the disable irq operation in system sleep for using vbus/id
gpio as the wakeup source on extcon-usb-gpio.c
- Add support of SM5703 device by using existing extcon-sm5502.c
and rename i2c_devic_id from sm5703 to sm5703-muic to reduce confusion
between SM5703 MFD device and extcon device.
- Add usb role class support and add queue work sync before driver release
on extcon-ptn5150.c

* tag 'extcon-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: Modify extcon device to be created after driver data is set
  extcon: sm5502: Clarify SM5703's i2c device ID
  extcon: ptn5150: Add usb role class support
  extcon: ptn5150: Add queue work sync before driver release
  extcon: sm5502: Add support for SM5703
  dt-bindings: extcon: bindings for SM5703
  extcon: usb-gpio: Remove disable irq operation in system sleep
  extcon: Fix some kernel-doc comments
  extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()
  extcon: int3496: Add support for controlling Vbus through a regulator
  extcon: int3496: Add support for binding to plain platform devices
  extcon: int3496: Request non-exclusive access to the ID GPIO
  extcon: int3496: Make the driver a bit less verbose
  extcon: Fix extcon_get_extcon_dev() error handling

Merge tag 'soundwire-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.19-rc1

 - Support for v1.6.0 Qualcomm controllers
 - Bunch of pm updates by Intel for peripheral attachment and system pm
   etc

* tag 'soundwire-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: qcom: adjust autoenumeration timeout
  soundwire: qcom: use pm_runtime_resume_and_get()
  soundwire: intel: use pm_runtime_resume_and_get()
  soundwire: cadence: use pm_runtime_resume_and_get()
  soundwire: bus: use pm_runtime_resume_and_get()
  soundwire: qcom: return error when pm_runtime_get_sync fails
  soundwire: bus: pm_runtime_request_resume on peripheral attachment
  soundwire: intel: disable WAKEEN in pm_runtime resume
  soundwire: intel: prevent pm_runtime resume prior to system suspend
  soundwire: cadence: recheck device0 attachment after status change
  dt-bindings: soundwire: qcom: Add bindings for audio clock reset control property
  soundwire: qcom: Add compatible name for v1.6.0
  soundwire: stream: Fix error return code in do_bank_switch()
  soundwire: qcom: fix an error message in swrm_wait_for_frame_gen_enabled()

Merge tag 'phy-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-work-next

Vinod writes:

phy-for-5.19

  - New support:
        - LVDS configuration support and implementation in fsl driver
	- Qualcomm UFS phy support for SM6350 and USB PHY for SDX65
	- Allwinner D-PHY Rx mode support
	- Yamilfy Mixel mipi-dsi-phy

  - Updates:
	- Documentation for phy ops order
        - Can transceiver mux support
	- Qualcomm QMP phy updates
	- Uniphier phy updates

* tag 'phy-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
  phy: qcom-qmp: rename error labels
  phy: qcom-qmp: fix pipe-clock imbalance on power-on failure
  phy: qcom-qmp: switch to explicit reset helpers
  phy: qcom-qmp: fix reset-controller leak on probe errors
  phy: qcom-qmp: fix struct clk leak on probe errors
  dt-bindings: phy: renesas,usb2-phy: Document RZ/G2UL phy bindings
  dt-bindings: phy: marvell,armada-3700-utmi-host-phy: Fix incorrect compatible in example
  phy: qcom-qmp: fix phy-descriptor kernel-doc typo
  phy: rockchip-inno-usb2: Clean up some inconsistent indenting
  phy: freescale: imx8m-pcie: Handle IMX8_PCIE_REFCLK_PAD_UNUSED
  phy: core: Warn when phy_power_on is called before phy_init
  phy: core: Update documentation syntax
  phy: core: Add documentation of phy operation order
  phy: rockchip-inno-usb2: Handle ID IRQ
  phy: rockchip-inno-usb2: Handle bvalid falling
  phy: rockchip-inno-usb2: Support multi-bit mask properties
  phy: rockchip-inno-usb2: Do not lock in bvalid IRQ handler
  phy: rockchip-inno-usb2: Do not check bvalid twice
  phy: rockchip-inno-usb2: Fix muxed interrupt support
  phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2
  ...

Merge tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-work-next

Manivannan writes:

MHI changes for v5.19

MHI Host
--------

Support for new modems:

 - Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
 - Telit FN980 v1 based on SDX55
 - Telit FN990 based on SDX65
 - Foxconn T99W373/T99W368 based on SDX62/SDX65

Core changes:

 - During the recycle of event ring elements, compute the ctxt_wp based on the
   local cached value instead of reading from shared memory. This is to prevent
   the possible corruption of the ctxt_wp as some of the endpoint devices could
   modify the value in shared memory.

 - Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
   spec allows the host to hard reset the device in the case of an unrecoverable
   error and all other reset mechanisms have failed.

 - During MHI shutdown, wait for the endpoint device to enter the ready state
   post reset before proceeding. This is to avoid a possible race where host
   would remove the interrupt handler and device will send ready state
   interrupt, resulting in IOMMU fault.

 - Bail out updating the MHI register if the read has failed during
   read/modify/write.

 - Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
   register fields in mhi_init_mmio().

MAINTAINERS change:

 - Since Qualcomm has moved the email domain for its employess from codeaurora
   domain to quicinc, update the same for Hemant.

* tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits)
  bus: mhi: host: Add support for Foxconn T99W373 and T99W368
  bus: mhi: host: pci_generic: add Telit FN990
  bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
  bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB
  bus: mhi: host: Optimize and update MMIO register write method
  bus: mhi: host: Bail on writing register fields if read fails
  bus: mhi: host: Wait for ready state after reset
  bus: mhi: host: Add soc_reset sysfs
  bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID
  bus: mhi: host: Use cached values for calculating the shared write pointer
  MAINTAINERS: Update Hemant's email id
  bus: mhi: ep: Add uevent support for module autoloading
  bus: mhi: ep: Add support for suspending and resuming channels
  bus: mhi: ep: Add support for queueing SKBs to the host
  bus: mhi: ep: Add support for processing channel rings
  bus: mhi: ep: Add support for reading from the host
  bus: mhi: ep: Add support for processing command rings
  bus: mhi: ep: Add support for handling SYS_ERR condition
  bus: mhi: ep: Add support for handling MHI_RESET
  bus: mhi: ep: Add support for powering down the MHI endpoint stack
  ...

Merge tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

First set of IIO new device support, features and cleanup for 5.19

Usual mixed bag. Stand out this time is Andy Shevchenko's continuing
effort to move drivers over the generic firmware interfaces.

Device support
* sprd,sc2720
  - upm9620 binding addition.
  - Refactor and support for sc2720, sc2721 and sc2730.
* ti,ads1015
  - Refactor driver and add support for TLA2024.

Device support (IDs only)
* invensense,mpu6050
  - Add ID for ICM-20608-D.
* st,accel:
  -  Add ID for lis302dl.
* st,lsm6dsx
  - Add support for ASM330LHHX (can fallback to LSM6DSR.)

Features
* convert drivers to device properties
  - IIO core
  - adi,ad7266
  - adi,adis16480
  - adi,adxl355
  - bosch,bmi160
  - domintech,dmard06
  - fsl,fxas21002c
  - invensense,mpu3050
  - linear,ltc2983
  - linear,ltc2632
  - maxbotix,mb1232
  - maxim,max31856
  - maxim,max31865
  - multiplexer
  - ping
  - rescale
  - taos,tsl2772
* core
  - Add runtime check on whether realbits fit in storagebits for each
    channel.
* adi,ad_sigma_delta
  - Add sequencer support and relevant update_scan_mode callbacks for
    adi,ad7192 and adi,ad7124.

Cleanup and minor fixes
* MAINTAINERS
  - Update Lorenzo Bianconi's email address for IIO drivers.
  - Add entry for ad3552r and update maintainer in dt-binding doc.
* tree-wide
  - Replace strtobool() with kstrtobool().
  - Drop false OF dependencies.
* core
  - Tidy up and document IIO modes.
  - Take iio_buffer_enabled() out of header allowing current_mode to be
    moved to the opaque structure.
  - As all kfifo buffers use the same mode value, drop that parameter
    and set it unconditionally.
  - White space fixes and similar.
  - Drop use of list iterator variable for
    list_for_each_entry_continue_reverse and use list_prepare_entry to
    restart.
* sysfs-trigger
  - Replace use of 'found' variable with dedicate list iterator variable.
* adi,ad7124
  - Drop misleading shift.
* adi,ad2s1210
  - Remove redundant local variable assignment.
* adi,adis16480
  - Use local device pointer to reduce repetition.
  - Improve handling of clocks.
* domintech,dmard09
  - White space.
* dummy driver
  - Improve error handling.
* fsl,mma8452
  - Add missing documentation of name element.
* invensense,mpu3050
  - Stop remove() returning non 0.
* kionix,kxsd9
  - White space.
* linear,ltc2688
  - Use local variable for struct device.
  - Combine of_node_put() error handling paths.
* linear,ltc2983
  - Avoid use of constants in messages where a define is available.
* microchip,mcp4131
  - Fix compatible in dt example.
* pni,rm3100
  - Stop directly accessing iio_dev->current_mode just to find out
    if the buffer is enabled.
* renesas,rzg2l
  - Relax kconfig constraint to include newer devices.
* sprd,sc27xx
  - Fix wrong scaling mask.
  - Improve the calibration values.
* samsung,ssp
  - Replace a 'found' variable in favor of an explicit value that was
    found.
* sensortek,stk3xx
  - Add proximity-near-level binding and driver support.
* st,st_sensors:
  - Drop unused accel_type enum.
  - Return early in *_write_raw()
  - Drop unnecessary locking in _avail functions.
  - Add local lock to protect odr against concurrent updates allowing
    mlock to no longer be used outside of the core.
  - Use iio_device_claim_direct_mode() rather than racy checking of
    the current mode.
* st,stmpe-adc
  - Fix checks on wait_for_completion_timeout().
  - Allow use of of_device_id for matching.
* st,stm32-dfsdm
  - Stop accessing iio_dev->current_mode to find out if the buffer
    is enabled (so we can hide that variable in the opaque structure)
* st,vl53l0x
  - Fix checks on wait_for_completion_timeout.
* ti,ads1015
  - Add missing ID for ti,ads1115 in binding doc.
  - Convert from repeated chip ID look up to selecting static const
    data.
  - Switch to read_avail() callback.
* ti,ads8688
  - Use of_device_id for driver matching.
* ti,palmas-adc
  - Drop a warning on minor calibration mismatch leading to slightly
    negative values after applying the calibration.

* tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits)
  iio: ti-ads8688: use of_device_id for OF matching
  iio: stmpe-adc: use of_device_id for OF matching
  dt-bindings: iio: Fix incorrect compatible strings in examples
  iio: gyro: mpu3050: Make mpu3050_common_remove() return void
  iio: dac: ltc2632: Make use of device properties
  iio: temperature: max31865: Make use of device properties
  iio: proximity: mb1232: Switch to use fwnode_irq_get()
  iio: imu: adis16480: Improve getting the optional clocks
  iio: imu: adis16480: Use temporary variable for struct device
  iio: imu: adis16480: Make use of device properties
  staging: iio: ad2s1210: remove redundant assignment to variable negative
  iio: adc: sc27xx: add support for PMIC sc2730
  iio: adc: sc27xx: add support for PMIC sc2720 and sc2721
  iio: adc: sc27xx: refactor some functions for support more PMiCs
  iio: adc: sc27xx: structure adjustment and optimization
  iio: adc: sc27xx: Fine tune the scale calibration values
  iio: adc: sc27xx: fix read big scale voltage not right
  dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding
  iio: proximity: stk3310: Export near level property for proximity sensor
  dt-bindings: iio: light: stk33xx: Add proximity-near-level
  ...

These interconnects are modeled as clks, not interconnects, therefore
remove the compatibles from the binding as they're unused.

Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220415005828.1980055-3-swboyd@chromium.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

This patch set is to address two clock rate setting issues.

The first patch is to fix a potential cached clock rate mismatching
issue, the issue can lead to the clock rate is missed to be set. Note,
since this potential issue requires specific time window and certain
condition (consumers need to request the same bandwidth) to produce,
the patch is based on analysis but not a real trace log.

The second patch is an extension to cache clock rates for active and
sleep clocks separately, with this change it gives us possibility to set
active and sleep clock with different clock rates.

* icc-rpm
  interconnect: qcom: icc-rpm: Fix for cached clock rate
  interconnect: qcom: icc-rpm: Cache every clock rate

Link: https://lore.kernel.org/r/20220416031029.693211-1-leo.yan@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

This contains a few fixes for the sc8180x interconnect provider driver to make
it functional.

* icc-sc8180x
  dt-bindings: interconnect: Add SC8180X QUP0 virt provider
  interconnect: qcom: sc8180x: Modernize sc8180x probe
  interconnect: qcom: sc8180x: Fix QUP0 nodes
  interconnect: qcom: sc8180x: Mark some BCMs keepalive

Link: https://lore.kernel.org/r/20220503211925.1022169-1-bjorn.andersson@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

Constify structs that are not modified.

Link: https://lore.kernel.org/r/20220412102623.227607-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

The Qualcomm interconnect providers started off defining nodes and BCMs
using the DEFINE_QNODE() and DEFINE_QBCM() macros. Unfortunately this
results in a block of long lines that are hard to read, a transition to
explicitly stated definition has been made for newly introduced
platforms.

Transition the SC8180X interconnect provider driver to this style as
well, to make it easier to read while debugging interconnect related
issues.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503225300.1141814-1-bjorn.andersson@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

In line with other platforms, mark BCMs controlling paths between the
CPU, AOSS, GIC and memory as keepalive.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-5-bjorn.andersson@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-4-bjorn.andersson@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

The introduction of the Qualcomm SC8180X provider raced with the
refactoring of the RPMh common code and SC8180X was left with the old
style of duplicating the probe function in each provider driver.

Transition the driver to the "new" design.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-3-bjorn.andersson@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

Add compatible for the QUP0 BCM provider found in SC8180X.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-2-bjorn.andersson@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

This adds interconnect driver support for SDX65 platform for scaling the
bandwidth requirements over RPMh.

Link: https://lore.kernel.org/r/1649854415-11174-1-git-send-email-quic_rohiagar@quicinc.comSigned-off-by: Georgi Djakov <djakov@kernel.org>

Add interconnect driver support for Qualcomm SC8280XP platform.

* icc-sc8280xp
  dt-bindings: interconnect: qcom: Add sc8280xp binding
  interconnect: qcom: Add SC8280XP interconnect provider
  interconnect: qcom: sc8280xp: constify qcom_icc_desc
  interconnect: qcom: sc8280xp: constify icc_node pointers
  interconnect: qcom: sc8280xp: constify qcom_icc_bcm pointers

Link: https://lore.kernel.org/r/20220408214835.624494-1-bjorn.andersson@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

With the kmalloc() size annotations, GCC is smart enough to realize that
LKDTM is intentionally writing past the end of the buffer. This is on
purpose, of course, so hide the buffer from the optimizer. Silences:

../drivers/misc/lkdtm/heap.c: In function 'lkdtm_SLAB_LINEAR_OVERFLOW':
../drivers/misc/lkdtm/heap.c:59:13: warning: array subscript 256 is outside array bounds of 'void[1020]' [-Warray-bounds]
   59 |         data[1024 / sizeof(u32)] = 0x12345678;
      |         ~~~~^~~~~~~~~~~~~~~~~~~~
In file included from ../drivers/misc/lkdtm/heap.c:7:
In function 'kmalloc',
    inlined from 'lkdtm_SLAB_LINEAR_OVERFLOW' at ../drivers/misc/lkdtm/heap.c:54:14:
../include/linux/slab.h:581:24: note: at offset 1024 into object of size 1020 allocated by 'kmem_cache_alloc_trace'
  581 |                 return kmem_cache_alloc_trace(
      |                        ^~~~~~~~~~~~~~~~~~~~~~~
  582 |                                 kmalloc_caches[kmalloc_type(flags)][index],
      |                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  583 |                                 flags, size);
      |                                 ~~~~~~~~~~~~

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>

Add config options which are needed for LKDTM sub-tests:
STACKLEAK_ERASING test needs GCC_PLUGIN_STACKLEAK config.
READ_AFTER_FREE and READ_BUDDY_AFTER_FREE tests need
INIT_ON_FREE_DEFAULT_ON config.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220517132932.1484719-1-usama.anjum@collabora.com