- 03 Oct, 2020 3 commits
-
-
Eric Biggers authored
One of the entries has three fields "mistake||correction||correction" rather than the expected two fields "mistake||correction". Fix it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.orgSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joonsoo Kim authored
memalloc_nocma_{save/restore} APIs can be used to skip page allocation on CMA area, but, there is a missing case and the page on CMA area could be allocated even if APIs are used. This patch handles this case to fix the potential issue. For now, these APIs are used to prevent long-term pinning on the CMA page. When the long-term pinning is requested on the CMA page, it is migrated to the non-CMA page before pinning. This non-CMA page is allocated by using memalloc_nocma_{save/restore} APIs. If APIs doesn't work as intended, the CMA page is allocated and it is pinned for a long time. This long-term pin for the CMA page causes cma_alloc() failure and it could result in wrong behaviour on the device driver who uses the cma_alloc(). Missing case is an allocation from the pcplist. MIGRATE_MOVABLE pcplist could have the pages on CMA area so we need to skip it if ALLOC_CMA isn't specified. Fixes: 8510e69c (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs) Signed-off-by:Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by:
-
Eric Farman authored
The routine that applies debug flags to the kmem_cache slabs inadvertantly prevents non-debug flags from being applied to those same objects. That is, if slub_debug=<flag>,<slab> is specified, non-debugged slabs will end up having flags of zero, and the slabs may be unusable. Fix this by including the input flags for non-matching slabs with the contents of slub_debug, so that the caches are created as expected alongside any debugging options that may be requested. With this, we can remove the check for a NULL slub_debug_string, since it's covered by the loop itself. Fixes: e17f1dfb ("mm, slub: extend slub_debug syntax for multiple blocks") Signed-off-by:
Eric Farman <farman@linux.ibm.com> Signed-off-by:
-
- 02 Oct, 2020 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Some pin control fixes here. All of them are driver fixes, the Intel Cherryview being the most interesting one. - Fix a mux problem for I2C in the MVEBU driver. - Fix a really hairy inversion problem in the Intel Cherryview driver. - Fix the register for the sdc2_clk in the Qualcomm SM8250 driver. - Check the virtual GPIO boot failur in the Mediatek driver" * tag 'pinctrl-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mediatek: check mtk_is_virt_gpio input parameter pinctrl: qcom: sm8250: correct sdc2_clk pinctrl: cherryview: Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOs pinctrl: mvebu: Fix i2c sda definition for 98DX3236 -
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix rockchip regression in rockchip_pcie_valid_device() (Lorenzo Pieralisi) - Add Pali Rohár as aardvark PCI maintainer (Pali Rohár) * tag 'pci-v5.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Add Pali Rohár as aardvark PCI maintainer PCI: rockchip: Fix bus checks in rockchip_pcie_valid_device()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two patches in driver frameworks. The iscsi one corrects a bug induced by a BPF change to network locking and the other is a regression we introduced" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername() scsi: target: Fix lun lookup for TARGET_SCF_LOOKUP_LUN_FROM_TAG case
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - fix for async buffered reads if read-ahead is fully disabled (Hao) - double poll match fix - ->show_fdinfo() potential ABBA deadlock complaint fix * tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-block: io_uring: fix async buffered reads when readahead is disabled io_uring: fix potential ABBA deadlock in ->show_fdinfo() io_uring: always delete double poll wait entry on match
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Single fix for a ->commit_rqs failure case" * tag 'block-5.9-2020-10-02' of git://git.kernel.dk/linux-block: blk-mq: call commit_rqs while list empty but error happen
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull epoll fixes from Al Viro: "Several race fixes in epoll" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ep_create_wakeup_source(): dentry name can change under you... epoll: EPOLL_CTL_ADD: close the race in decision to take fast path epoll: replace ->visited/visited_list with generation count epoll: do not insert into poll queues until all sanity checks are done
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "Two fixes for this week: - The addition of a symbol export for clint_time_val, which has been inlined into some timex functions and can be used by drivers. - A fix to avoid calling get_cycles() before the timers have been probed. These both only effect !MMU systems" * tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Check clint_time_val before use clocksource: clint: Export clint_time_val for modules -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Two more fixes. One is for a lockdep warning/lockup (also caught by syzbot), that one has been seen in practice. Regarding the other syzbot reports mentioned last time, they don't seem to be urgent and reliably reproducible so they'll be fixed later. The second fix is for a potential corruption when device replace finishes and the in-memory state of trim is not copied to the new device" * tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix filesystem corruption after a device replace btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishing
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix one more issue related to the recent RCU-lockdep changes, a typo in documentation and add a missing return statement to intel_pstate. Specifics: - Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf Hansson) - Fix typo in the PM documentation (Yoann Congal) - Add return statement that is missing after recent changes in the intel_pstate driver (Zhang Rui)" * tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: imx6q: Fixup RCU usage for cpuidle Documentation: PM: Fix a reStructuredText syntax error cpufreq: intel_pstate: Fix missing return statement -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull IIO fixes from Greg KH: "Here are two small IIO driver fixes for 5.9-rc8 that resolve some reported issues: - driver name fixed in one driver - device name typo fixed Both have been in linux-next for a while with no reported problems" * tag 'staging-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: qcom-spmi-adc5: fix driver name iio: adc: ad7124: Fix typo in device name
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Some late GPIO fixes for the v5.9 series: - Fix compiler warnings on the OMAP when PM is disabled - Clear the interrupt when setting edge sensitivity on the Spreadtrum driver. - Fix up spurious interrupts on the TC35894. - Support threaded interrupts on the Siox controller. - Fix resource leaks on the mockup driver. - Fix line event handling in syscall compatible mode for the character device. - Fix an unitialized variable in the PCA953A driver. - Fix access to all GPIO IRQs on the Aspeed AST2600. - Fix line direction on the AMD FCH driver. - Use the bitmap API instead of compiler intrinsics for bit manipulation in the PCA953x driver" * tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x gpio: pca953x: Use bitmap API over implicit GCC extension gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION gpio: aspeed: fix ast2600 bank properties gpio/aspeed-sgpio: don't enable all interrupts by default gpio/aspeed-sgpio: enable access to all 80 input & output sgpios gpio: pca953x: Fix uninitialized pending variable gpiolib: Fix line event handling in syscall compatible mode gpio: mockup: fix resource leak in error path gpio: siox: explicitly support only threaded irqs gpio: tc35894: fix up tc35894 interrupt configuration gpio: sprd: Clear interrupt when setting the type as edge gpio: omap: Fix warnings if PM is disabled -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - Fix deadlock when removing MEMSTICK host - Workaround broken CMDQ on Intel GLK based IRBIS models * tag 'mmc-v5.9-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models memstick: Skip allocating card when removing host
-
Thibaut Sautereau authored
Commit f227e3ec ("random32: update the net random state on interrupt and activity") broke compilation and was temporarily fixed by Linus in 83bdc727 ("random32: remove net_rand_state from the latent entropy gcc plugin") by entirely moving net_rand_state out of the things handled by the latent_entropy GCC plugin. From what I understand when reading the plugin code, using the __latent_entropy attribute on a declaration was the wrong part and simply keeping the __latent_entropy attribute on the variable definition was the correct fix. Fixes: 83bdc727 ("random32: remove net_rand_state from the latent entropy gcc plugin") Acked-by:
Willy Tarreau <w@1wt.eu> Cc: Emese Revfy <re.emese@gmail.com> Signed-off-by:
Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr> Signed-off-by:
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: intel_pstate: Fix missing return statement
-
Roman Gushchin authored
Since commit ea426c2a ("mm: memcg: prepare for byte-sized vmstat items") the write side of slab counters accepts a value in bytes and converts it to pages. It happens in __mod_node_page_state(). However a non-SMP version of __mod_node_page_state() doesn't perform this conversion. It leads to incorrect (unrealistically high) slab counters values. Fix this by adding a similar conversion to the non-SMP version of __mod_node_page_state(). Signed-off-by:
Roman Gushchin <guro@fb.com> Reported-and-tested-by:
Bastian Bittorf <bb@npl.de> Fixes: ea426c2a ("mm: memcg: prepare for byte-sized vmstat items") Acked-by:
-
Linus Torvalds authored
The pipe splice code still used the old model of waiting for pipe IO by using a non-specific "pipe_wait()" that waited for any pipe event to happen, which depended on all pipe IO being entirely serialized by the pipe lock. So by checking the state you were waiting for, and then adding yourself to the wait queue before dropping the lock, you were guaranteed to see all the wakeups. Strictly speaking, the actual wakeups were not done under the lock, but the pipe_wait() model still worked, because since the waiter held the lock when checking whether it should sleep, it would always see the current state, and the wakeup was always done after updating the state. However, commit 0ddad21d ("pipe: use exclusive waits when reading or writing") split the single wait-queue into two, and in the process also made the "wait for event" code wait for _two_ wait queues, and that then showed a race with the wakers that were not serialized by the pipe lock. It's only splice that used that "pipe_wait()" model, so the problem wasn't obvious, but Josef Bacik reports: "I hit a hang with fstest btrfs/187, which does a btrfs send into /dev/null. This works by creating a pipe, the write side is given to the kernel to write into, and the read side is handed to a thread that splices into a file, in this case /dev/null. The box that was hung had the write side stuck here [pipe_write] and the read side stuck here [splice_from_pipe_next -> pipe_wait]. [ more details about pipe_wait() scenario ] The problem is we're doing the prepare_to_wait, which sets our state each time, however we can be woken up either with reads or writes. In the case above we race with the WRITER waking us up, and re-set our state to INTERRUPTIBLE, and thus never break out of schedule" Josef had a patch that avoided the issue in pipe_wait() by just making it set the state only once, but the deeper problem is that pipe_wait() depends on a level of synchonization by the pipe mutex that it really shouldn't. And the whole "wait for any pipe state change" model really isn't very good to begin with. So rather than trying to work around things in pipe_wait(), remove that legacy model of "wait for arbitrary pipe event" entirely, and actually create functions that wait for the pipe actually being readable or writable, and can do so without depending on the pipe lock serializing everything. Fixes: 0ddad21d ("pipe: use exclusive waits when reading or writing") Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/Reported-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-and-tested-by:
-
- 01 Oct, 2020 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Fix a device reference counting bug in the Exynos IOMMU driver. - Lockdep fix for the Intel VT-d driver. - Fix a bug in the AMD IOMMU driver which caused corruption of the IVRS ACPI table and caused IOMMU driver initialization failures in kdump kernels. * tag 'iommu-fixes-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb() iommu/amd: Fix the overwritten field in IVMD header iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "A previous commit to prevent AML memory opregions from accessing the kernel memory turned out to be too restrictive. Relax the permission check to permit the ACPI core to map kernel memory used for table overrides" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: permit ACPI core to map kernel memory used for table overrides
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "AMD and vmwgfx fixes. Just dequeuing these a bit early as the AMD ones are bit larger than I'd prefer, but Alex missed last week so it's a double set of fixes. The larger ones are just register header fixes for the new chips that were just introduced in rc1 along with some new PCI IDs for new hw. Otherwise it is usual fixes. The vmwgfx fix was due to some testing I was doing and found we weren't booting properly, vmware had the fix internally so hurried it vmwgfx: - fix a regression due to TTM refactor amdgpu: - Fix potential double free in userptr handling - Sienna Cichlid and Navy Flounder udpates - Add Sienna Cichlid PCI IDs - Drop experimental flag for navi12 - Raven fixes - Renoir fixes - HDCP fix - DCN3 fix for clang and older versions of gcc - Fix a runtime pm refcount issue" * tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: disable gfxoff temporarily for navy_flounder drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/vmwgfx: Fix error handling in get_node drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version() drm/amdgpu/swsmu/smu12: fix force clock handling for mclk drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config drm/amdgpu/display: fix CFLAGS setup for DCN30 drm/amd/display: fix return value check for hdcp_work drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc. drm/amd/pm: Removed fixed clock in auto mode DPM drm/amdgpu: remove experimental flag from navi12 drm/amdgpu: add device ID for sienna_cichlid (v2) drm/amdgpu: use the AV1 defines for VCN 3.0 drm/amdgpu: add VCN 3.0 AV1 registers drm/amdgpu: add the GC 10.3 VRS registers drm/amdgpu: prevent double kfree ttm->sg
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Two tracing fixes: - Fix temp buffer accounting that caused a WARNING for ftrace_dump_on_opps() - Move the recursion check in one of the function callback helpers to the beginning of the function, as if the rcu_is_watching() gets traced, it will cause a recursive loop that will crash the kernel" * tag 'trace-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Move RCU is watching check after recursion check tracing: Fix trace_find_next_entry() accounting of temp buffer size -
Lu Baolu authored
Lock(&iommu->lock) without disabling irq causes lockdep warnings. [ 12.703950] ======================================================== [ 12.703962] WARNING: possible irq lock inversion dependency detected [ 12.703975] 5.9.0-rc6+ #659 Not tainted [ 12.703983] -------------------------------------------------------- [ 12.703995] systemd-udevd/284 just changed the state of lock: [ 12.704007] ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at: iommu_flush_dev_iotlb.part.57+0x2e/0x90 [ 12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 12.704043] (&iommu->lock){+.+.}-{2:2} [ 12.704045] and interrupts could create inverse lock ordering between them. [ 12.704073] other info that might help us debug this: [ 12.704085] Possible interrupt unsafe locking scenario: [ 12.704097] CPU0 CPU1 [ 12.704106] ---- ---- [ 12.704115] lock(&iommu->lock); [ 12.704123] local_irq_disable(); [ 12.704134] lock(device_domain_lock); [ 12.704146] lock(&iommu->lock); [ 12.704158] <Interrupt> [ 12.704164] lock(device_domain_lock); [ 12.704174] *** DEADLOCK *** Signed-off-by:Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.comSigned-off-by:
Joerg Roedel <jroedel@suse.de>
-
Adrian Huang authored
Commit 387caf0b ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions") accidentally overwrites the 'flags' field in IVMD (struct ivmd_header) when the I/O virtualization memory definition is associated with the exclusion range entry. This leads to the corrupted IVMD table (incorrect checksum). The kdump kernel reports the invalid checksum: ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177) AMD-Vi: [Firmware Bug]: IVRS invalid checksum Fix the above-mentioned issue by modifying the 'struct unity_map_entry' member instead of the IVMD header. Cleanup: The *exclusion_range* functions are not used anymore, so get rid of them. Fixes: 387caf0b ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions") Reported-and-tested-by:
Baoquan He <bhe@redhat.com> Signed-off-by:
Adrian Huang <ahuang12@lenovo.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.comSigned-off-by:
-
Andy Shevchenko authored
When driver has been converted to the bitmap API the non-bitmap functions started behaving differently on 32-bit BE architectures since the bytes in two consequent unsigned longs are in different order in comparison to byte array. Hence if the chip had had more than 32 lines the memset() call over it would have not set up upper lines correctly. Although it's currently a theoretical case (no supported chips of this type has 32+ lines), it's better to provide a clean code to avoid people thinking this is okay and potentially producing not fully working things. Fixes: 35d13d94 ("gpio: pca953x: convert to use bitmap API") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200930142013.59247-2-andriy.shevchenko@linux.intel.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Andy Shevchenko authored
In IRQ handler we have to clear bitmap before use. Currently the GCC extension has been used for that. For sake of the consistency switch to bitmap API. As expected bloat-o-meter shows no difference in the object size. Signed-off-by:
-
Hanks Chen authored
check mtk_is_virt_gpio input parameter, virtual gpio need to support eint mode. add error handler for the ko case to fix this boot fail: pc : mtk_is_virt_gpio+0x20/0x38 [pinctrl_mtk_common_v2] lr : mtk_gpio_get_direction+0x44/0xb0 [pinctrl_paris] Fixes: edd54646 ("pinctrl: mediatek: avoid virtual gpio trying to set reg") Signed-off-by:
Hanks Chen <hanks.chen@mediatek.com> Acked-by:
Sean Wang <sean.wang@kernel.org> Singed-off-by:
Jie Yang <sin_jieyang@mediatek.com> Link: https://lore.kernel.org/r/1597922546-29633-1-git-send-email-hanks.chen@mediatek.comSigned-off-by:
-
Dmitry Baryshkov authored
Correct sdc2_clk pin definition (register offset is wrong, verified by the msm-4.19 driver). Fixes: 4e3ec9e4 ("pinctrl: qcom: Add sm8250 pinctrl driver.") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200914091846.55204-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.9-2020-09-30' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-30: amdgpu: - Fix potential double free in userptr handling - Sienna Cichlid and Navy Flounder udpates - Add Sienna Cichlid PCI IDs - Drop experimental flag for navi12 - Raven fixes - Renoir fixes - HDCP fix - DCN3 fix for clang and older versions of gcc - Fix a runtime pm refcount issue Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200930161326.4243-1-alexander.deucher@amd.com
-
- 30 Sep, 2020 10 commits
-
-
Pali Rohár authored
Link: https://lore.kernel.org/r/20200925092115.16546-1-pali@kernel.orgSigned-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Thomas Petazzzoni <thomas.petazzoni@bootlin.com>
-
Ard Biesheuvel authored
Jonathan reports that the strict policy for memory mapped by the ACPI core breaks the use case of passing ACPI table overrides via initramfs. This is due to the fact that the memory type used for loading the initramfs in memory is not recognized as a memory type that is typically used by firmware to pass firmware tables. Since the purpose of the strict policy is to ensure that no AML or other ACPI code can manipulate any memory that is used by the kernel to keep its internal state or the state of user tasks, we can relax the permission check, and allow mappings of memory that is reserved and marked as NOMAP via memblock, and therefore not covered by the linear mapping to begin with. Fixes: 1583052d ("arm64/acpi: disallow AML memory opregions to access kernel memory") Fixes: 325f5585 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions") Reported-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Tested-by:
Catalin Marinas <catalin.marinas@arm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Another batch of clk driver fixes: - Make sure DRAM and ChipID region doesn't get disabled on Exynos - Fix a SATA failure on Tegra - Fix the emac_ptp clk divider on stratix10" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED clk: tegra: Fix missing prototype for tegra210_clk_register_emc() clk: tegra: Always program PLL_E when enabled clk: tegra: Capitalization fixes clk: samsung: Keep top BPLL mux on Exynos542x enabled
-
Anup Patel authored
The NoMMU kernel is broken for QEMU virt machine from Linux-5.9-rc6 because clint_time_val is used even before CLINT driver is probed at following places: 1. rand_initialize() calls get_cycles() which in-turn uses clint_time_val 2. boot_init_stack_canary() calls get_cycles() which in-turn uses clint_time_val The issue#1 (above) is fixed by providing custom random_get_entropy() for RISC-V NoMMU kernel. For issue#2 (above), we remove dependency of boot_init_stack_canary() on get_cycles() and this is aligned with the boot_init_stack_canary() implementations of ARM, ARM64 and MIPS kernel. Fixes: d5be89a8 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Signed-off-by:
Anup Patel <anup.patel@wdc.com> Tested-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
Filipe Manana authored
We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63e ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by:Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Josef Bacik authored
When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. There's a report from syzbot probably hitting one of the cases where the bd_mutex and device_list_mutex are taken in the wrong order, however it's not with device replace, like this patch fixes. As there's no reproducer available so far, we can't verify the fix. https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/ dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419 WARNING: possible circular locking dependency detected 5.9.0-rc5-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.0/6878 is trying to acquire lock: ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804 but task is already holding lock: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline] find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #3 (sb_internal#2){.+.+}-{0:0}: percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x234/0x470 fs/super.c:1672 sb_start_intwrite include/linux/fs.h:1690 [inline] start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline] find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __flush_work+0x60e/0xac0 kernel/workqueue.c:3041 wb_shutdown+0x180/0x220 mm/backing-dev.c:355 bdi_unregister+0x174/0x590 mm/backing-dev.c:872 del_gendisk+0x820/0xa10 block/genhd.c:933 loop_remove drivers/block/loop.c:2192 [inline] loop_control_ioctl drivers/block/loop.c:2291 [inline] loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 lo_open+0x19/0xd0 drivers/block/loop.c:1893 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507 blkdev_get fs/block_dev.c:1639 [inline] blkdev_open+0x227/0x300 fs/block_dev.c:1753 do_dentry_open+0x4b9/0x11b0 fs/open.c:817 do_open fs/namei.c:3251 [inline] path_openat+0x1b9a/0x2730 fs/namei.c:3368 do_filp_open+0x17e/0x3c0 fs/namei.c:3395 do_sys_openat2+0x16d/0x420 fs/open.c:1168 do_sys_open fs/open.c:1184 [inline] __do_sys_open fs/open.c:1192 [inline] __se_sys_open fs/open.c:1188 [inline] __x64_sys_open+0x119/0x1c0 fs/open.c:1188 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&bdev->bd_mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(sb_internal#2); lock(&fs_devs->device_list_mutex); lock(&bdev->bd_mutex); *** DEADLOCK *** 3 locks held by syz-executor.0/6878: #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365 #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178 #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 stack backtrace: CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x460027 RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027 RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0 RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460 R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460 Signed-off-by:
-
Ulf Hansson authored
The commit eb1f0023 ("lockdep,trace: Expose tracepoints"), started to expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat according to below. [6.870684] [<c0db7690>] (_raw_spin_lock) from [<c011f6a4>] (imx6q_enter_wait+0x18/0x9c) [6.878846] [<c011f6a4>] (imx6q_enter_wait) from [<c09abfb0>] (cpuidle_enter_state+0x168/0x5e4) To fix the problem, let's assign the corresponding idlestate->flags the CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit() at the proper point. Reported-by:
Dong Aisheng <aisheng.dong@nxp.com> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Yoann Congal authored
Fix a reStructuredText syntax error in the cpuidle PM admin-guide documentation: the ``...'' quotation marks are parsed as partial ''...'' reStructuredText markup and break the output formatting. This change them to "...". Signed-off-by:
Yoann Congal <yoann.congal@smile.fr> Signed-off-by:
-
Zhang Rui authored
Fix missing return statement when writing "off" to intel_pstate status sysfs I/F. Fixes: 55671ea3 ("cpufreq: intel_pstate: Free memory only when turning off") Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Jiansong Chen authored
gfxoff is temporarily disabled for navy_flounder, since at present the feature caused some tdr when performing display operations. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
