- 18 May, 2018 13 commits
-
-
Uma Krishnan authored
The kernel log can get filled with debug messages from send_cmd_ioarrin() when dynamic debug is enabled for the cxlflash module and there is a lot of legacy I/O traffic. While these messages are necessary to debug issues that involve command tracking, the abundance of data can overwrite other useful data in the log. The best option available is to limit the messages that should serve most of the common use cases. Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Uma Krishnan authored
The following Oops may be encountered if the device is reset, i.e. EEH recovery, while there is heavy I/O traffic: 59:mon> t [c000200db64bb680] c008000009264c40 cxlflash_queuecommand+0x3b8/0x500 [cxlflash] [c000200db64bb770] c00000000090d3b0 scsi_dispatch_cmd+0x130/0x2f0 [c000200db64bb7f0] c00000000090fdd8 scsi_request_fn+0x3c8/0x8d0 [c000200db64bb900] c00000000067f528 __blk_run_queue+0x68/0xb0 [c000200db64bb930] c00000000067ab80 __elv_add_request+0x140/0x3c0 [c000200db64bb9b0] c00000000068daac blk_execute_rq_nowait+0xec/0x1a0 [c000200db64bba00] c00000000068dbb0 blk_execute_rq+0x50/0xe0 [c000200db64bba50] c0000000006b2040 sg_io+0x1f0/0x520 [c000200db64bbaf0] c0000000006b2e94 scsi_cmd_ioctl+0x534/0x610 [c000200db64bbc20] c000000000926208 sd_ioctl+0x118/0x280 [c000200db64bbcc0] c00000000069f7ac blkdev_ioctl+0x7fc/0xe30 [c000200db64bbd20] c000000000439204 block_ioctl+0x84/0xa0 [c000200db64bbd40] c0000000003f8514 do_vfs_ioctl+0xd4/0xa00 [c000200db64bbde0] c0000000003f8f04 SyS_ioctl+0xc4/0x130 [c000200db64bbe30] c00000000000b184 system_call+0x58/0x6c When there is no room to send the I/O request, the cached room is refreshed by reading the memory mapped command room value from the AFU. The AFU register mapping is refreshed during a reset, creating a race condition that can lead to the Oops above. During a device reset, the AFU should not be unmapped until all the active send threads quiesce. An atomic counter, cmds_active, is currently used to track internal AFU commands and quiesce during reset. This same counter can also be used for the active send threads. Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiaofei Tan authored
Currently we don't check that device is not gone before dereferencing its elements in the function hisi_sas_task_exec() (specifically, the DQ pointer). This patch fixes this issue by filling in the DQ pointer in hisi_sas_task_prep() after we check that the device pointer is still safe to reference. [mkp: typo] Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
The IPTT of a slot is unique, and we currently use hisi_hba lock to protect it. Now slot is managed on hisi_sas_device.list, so use DQ lock to protect for allocating and freeing the slot. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Currently we lock the DQ to protect whole delivery process. So this stops us building slots for the same queue in parallel, and can affect performance. To optimise it, only lock the DQ during special periods, specifically when allocating a slot from the DQ and when delivering a slot to the HW. This approach is now safe, thanks to the previous patches to ensure that we always deliver a slot to the HW once allocated. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Currently we allocate the slot's memory buffer after allocating the DQ slot. To aid DQ lockout reduction, and allow slots to be built in parallel, move this step (which can fail) prior to allocating the slot. Also a stray spin_unlock_irqrestore() is removed from internal task exec function. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Since the task prep functions now should not fail, adjust the return types to void. In addition, some checks in the task prep functions are relocated to the main module; this is specifically the check for the number of elements in an sg list exceeded the HW SGE limit. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Currently we use DQ lock to protect delivery of DQ entry one by one. To optimise to allow more than one slot to be built for a single DQ in parallel, we need to remove the DQ lock when preparing slots, prior to delivery. To achieve this, we rearrange the slot build order to ensure that once we allocate a slot for a task, we do cannot fail to deliver the task. In this patch, we rearrange the slot building for SMP tasks to ensure that sg mapping part (which can fail) happens before we allocate the slot in the DQ. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Alim Akhtar authored
This makes ufshcd_config_pwr_mode non-static so that other vendors like exynos can use it. Signed-off-by: Seungwon Jeon <essuuj@gmail.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Alim Akhtar authored
Some host controllers don't support host controller enable via HCE. Signed-off-by: Seungwon Jeon <essuuj@gmail.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Alim Akhtar authored
Some host controllers support interrupt aggregation but don't allow resetting counter and timer in software. Signed-off-by: Seungwon Jeon <essuuj@gmail.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Alim Akhtar authored
In the right behavior, setting the bit to '0' indicates clear and '1' indicates no change. If host controller handles this the other way, UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR can be used. [mkp: typo] Signed-off-by: Seungwon Jeon <essuuj@gmail.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: "Asutosh Das (asd)" <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Kees Cook authored
On the quest to remove all VLAs from the kernel[1] this moves buffers off the stack. In the second instance, this collapses two separately allocated buffers into a single buffer, since they are used consecutively, which saves 256 bytes (QUERY_DESC_MAX_SIZE + 1) of stack space. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 15 May, 2018 5 commits
-
-
Luc Van Oostenryck authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Wen Xiong authored
This patch adds new adapter error log for P9 system with the new AZ SAS cable. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Trivial fix to spelling mistake in esas2r_debug message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Andrei Vagin authored
There are two advantages: * Direct I/O allows to avoid the write-back cache, so it reduces affects to other processes in the system. * Async I/O allows to handle a few commands concurrently. DIO + AIO shows a better perfomance for random write operations: Mode: O_DSYNC Async: 1 $ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sda --runtime=20 --numjobs=2 WRITE: bw=45.9MiB/s (48.1MB/s), 21.9MiB/s-23.0MiB/s (22.0MB/s-25.2MB/s), io=919MiB (963MB), run=20002-20020msec Mode: O_DSYNC Async: 0 $ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sdb --runtime=20 --numjobs=2 WRITE: bw=1607KiB/s (1645kB/s), 802KiB/s-805KiB/s (821kB/s-824kB/s), io=31.8MiB (33.4MB), run=20280-20295msec Known issue: DIF (PI) emulation doesn't work when a target uses async I/O, because DIF metadata is saved in a separate file, and it is another non-trivial task how to synchronize writing in two files, so that a following read operation always returns a consisten metadata for a specified block. Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Andrei Vagin <avagin@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Kees Cook authored
On the quest to remove all VLAs from the kernel[1] this rearranges the code to avoid a VLA warning under -Wvla (gcc doesn't recognize "const" variables as not triggering VLA creation). Additionally cleans up variable naming to avoid 80 character column limit. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org> Acked-by: Boaz Harrosh <ooo@electrozaur.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 08 May, 2018 22 commits
-
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also emulate_write_cache in configFS. Removed tcmu_netlink_event() since we have new netlink events helpers now. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_size in configFS. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_config in configFS. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Zhu Lingshan authored
Add new netlink events helpers tcmu_netlink_event_init() and tcmu_netlink_event_send(). These new functions intend to replace existing netlink events helper function tcmu_netlink_event(). The existing function tcmu_netlink_event() works well for events like TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink attribute. But if there is a command requires more than one attributes to send out, we have to use a struct to adapt the paremeter reconfig_data, it is hard to use one struct or a union in one struct to adapt every command with different attributes, it may get long and ugly. With the new two functions, we can call tcmu_netlink_event_init() to initialize a netlink event, then add all attributes we need by using nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So that we don't need to use a long struct or union if we want to send mulitple attributes for different commands. [mkp: typos] Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Wenwen Wang authored
In tw_chrdev_ioctl(), the length of the data buffer is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'data_buffer_length'. Then a security check is performed on it to make sure that the length is not more than 'TW_MAX_IOCTL_SECTORS * 512'. Otherwise, an error code -EINVAL is returned. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer length between the two copies. This way, the user can bypass the security check and inject invalid data buffer length. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in tw_chrdev_open() to avoid the above issues. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Wenwen Wang authored
In twa_chrdev_ioctl(), the ioctl driver command is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'driver_command'. Then a security check is performed on the data buffer size indicated by 'driver_command', which is 'driver_command.buffer_length'. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer size between the two copies. This way, the user can bypass the security check and inject invalid data buffer size. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in twa_chrdev_open()t o avoid the above issues. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Tomohiro Kusumi authored
MPT2_MAGIC_NUMBER as well as drivers/scsi/mpt2sas/mpt2sas_ctl.h were removed to reuse mpt3sas code since commit 09ec55ed ("mpt2sas: Remove .c and .h files from mpt2sas driver"). Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Tomohiro Kusumi authored
drivers/scsi/mpt2sas/ no longer exists after commit c84b06a4 ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs") merged/removed it. Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
If we had more than 32 megaraid cards then it would cause memory corruption. That's not likely, of course, but it's handy to enforce it and make the static checker happy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Trivial fix to spelling mistake in warning message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Trivial fix to spelling mistakes in lpfc_printf_log log message "mabilbox" -> "mailbox" "maibox" -> "mailbox" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Andrei Vagin authored
Signed-off-by: Andrei Vagin <avagin@openvz.org> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Trivial fix to spelling mistake in text string. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiaofei Tan authored
There is an SoC bug of v3 hw development version. When hot- unplugging a directly attached disk, the PHY down interrupt may not happen. It is very easy to appear on some boards. When this issue occurs, the controller will receive many invalid dword frames, and the "alos" fields of register HILINK_ERR_DFX can indicate that disk was unplugged. As an workaround solution, this patch detects this issue in the channel interrupt, and workaround it by following steps: - Disable the PHY - Clear error code and interrupt - Enable the PHY Then the HW will reissue PHY down interrupt. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
It is common to use readl poll timeout helpers in the driver, so create custom wrappers. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiaofei Tan authored
Event95 is used for DFX purpose. The relevant bit for this interrupt in the ENT_INT_SRC_MSK3 register has been disabled, so remove the processing. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
As a unconstrained command, a command can be sent to SATA disk even if SATA disk status is BUSY, ERR or DRQ. If an ATA reset assert is successful but ATA reset de-assert fails, then it will retry the reset de-assert. If reset de- assert retry is successful, we think it is okay to probe the device but actually it still has Err status. Apparently we need to retry the ATA reset assertion and de- assertion instead for this mentioned scenario. As such, we config ATA reset assert as a constrained command, if ATA reset de-assert fails, then ATA reset de-assert retry will also fail. Then we will retry the proper process of ATA reset assert and de-assert again. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
After the controller is reset, we currently may not honour the PHY max linkrate set via sysfs, in that after a reset we always revert to max linkrate of 12Gbps, ignoring the value set via sysfs. This patch modifies to policy to set the programmed PHY linkrate, honouring the max linkrate programmed via sysfs. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
We should only have the timer enabled after PHY up after controller reset, so disable prior to reset. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
It is possible to dereference a NULL-pointer in hisi_sas_abort_task() in special scenario when the device has been removed. If an SMP task times-out, it will call hisi_sas_abort_task() to recover. And currently there is a check in hisi_sas_abort_task() to avoid the situation of processing the abort for the removed device. However we have an ordering problem, in that we may reference a task for the removed device before checking if the device has been removed. Fix this by only referencing the sas_dev after we know it is still present. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-