When tmigr_setup_groups() fails the level 0 group allocation, then the
cleanup derefences index -1 of the local stack array.

Prevent this by checking the loop condition first.

Fixes: 7ee98877 ("timers: Implement the hierarchical pull model")
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20240506041059.86877-1-ppbuk5246@gmail.com

epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.

Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.

Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull EDAC fixes from Borislav Petkov:

 - Fix error logging and check user-supplied data when injecting an
   error in the versal EDAC driver

* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/versal: Do not log total error counts
  EDAC/versal: Check user-supplied data before injecting an error
  EDAC/versal: Do not register for NOC errors

Pull powerpc fixes from Michael Ellerman:

 - Fix incorrect delay handling in the plpks (keystore) code

 - Fix a panic when an LPAR boots with a frozen PE

Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.

* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
  powerpc/pseries: make max polling consistent for longer H_CALLs

Pull misc x86 fixes from Ingo Molnar:

 - Remove the broken vsyscall emulation code from
   the page fault code

 - Fix kexec crash triggered by certain SEV RMP
   table layouts

 - Fix unchecked MSR access error when disabling
   the x2APIC via iommu=off

* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove broken vsyscall emulation code from the page fault code
  x86/apic: Don't access the APIC when disabling x2APIC
  x86/sev: Add callback to apply RMP table fixups for kexec
  x86/e820: Add a new e820 table update helper

Pull irq fix from Ingo Molnar:
 "Fix suspicious RCU usage in __do_softirq()"

* tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  softirq: Fix suspicious RCU usage in __do_softirq()

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc/other driver fixes and new device ids
  for 6.9-rc7 that resolve some reported problems.

  Included in here are:

   - iio driver fixes

   - mei driver fix and new device ids

   - dyndbg bugfix

   - pvpanic-pci driver bugfix

   - slimbus driver bugfix

   - fpga new device id

  All have been in linux-next with no reported problems"

* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  slimbus: qcom-ngd-ctrl: Add timeout for wait operation
  dyndbg: fix old BUG_ON in >control parser
  misc/pvpanic-pci: register attributes via pci_driver
  fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
  mei: me: add lunar lake point M DID
  mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
  iio:imu: adis16475: Fix sync mode setting
  iio: accel: mxc4005: Reset chip on probe() and resume()
  iio: accel: mxc4005: Interrupt handling fixes
  dt-bindings: iio: health: maxim,max30102: fix compatible check
  iio: pressure: Fixes SPI support for BMP3xx devices
  iio: pressure: Fixes BME280 SPI driver data

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes for reported problems for
  6.9-rc7. Included in here are:

   - usb core fixes for found issues

   - typec driver fixes for reported problems

   - usb gadget driver fixes for reported problems

   - xhci build fixes

   - dwc3 driver fixes for reported issues

  All of these have been in linux-next this past week with no reported
  problems"

* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Check for port partner validity before consuming it
  usb: typec: tcpm: enforce ready state when queueing alt mode vdm
  usb: typec: tcpm: unregister existing source caps before re-registration
  usb: typec: tcpm: clear pd_event queue in PORT_RESET
  usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
  usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
  usb: ohci: Prevent missed ohci interrupts
  usb: typec: qcom-pmic: fix pdphy start() error handling
  usb: typec: qcom-pmic: fix use-after-free on late probe errors
  usb: gadget: f_fs: Fix a race condition when processing setup packets.
  USB: core: Fix access violation during port device removal
  usb: dwc3: core: Prevent phy suspend during init
  usb: xhci-plat: Don't include xhci.h
  usb: gadget: uvc: use correct buffer size when parsing configfs lists
  usb: gadget: composite: fix OS descriptors w_value logic
  usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete

Pull input fixes from Dmitry Torokhov:

 - a new ID for ASUS ROG RAIKIRI controllers added to xpad driver

 - amimouse driver structure annotated with __refdata to prevent section
   mismatch warnings.

* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: amimouse - mark driver struct with __refdata to prevent section mismatch
  Input: xpad - add support for ASUS ROG RAIKIRI

Merge tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fix from Masami Hiramatsu:

 - probe-events: Fix memory leak in parsing probe argument.

   There is a memory leak (forget to free an allocated buffer) in a
   memory allocation failure path. Fix it to jump to the correct error
   handling code.

* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()

Pull tracing and tracefs fixes from Steven Rostedt:

 - Fix RCU callback of freeing an eventfs_inode.

   The freeing of the eventfs_inode from the kref going to zero freed
   the contents of the eventfs_inode and then used kfree_rcu() to free
   the inode itself. But the contents should also be protected by RCU.
   Switch to a call_rcu() that calls a function to free all of the
   eventfs_inode after the RCU synchronization.

 - The tracing subsystem maps its own descriptor to a file represented
   by eventfs. The freeing of this descriptor needs to know when the
   last reference of an eventfs_inode is released, but currently there
   is no interface for that.

   Add a "release" callback to the eventfs_inode entry array that allows
   for freeing of data that can be referenced by the eventfs_inode being
   opened. Then increment the ref counter for this descriptor when the
   eventfs_inode file is created, and decrement/free it when the last
   reference to the eventfs_inode is released and the file is removed.
   This prevents races between freeing the descriptor and the opening of
   the eventfs file.

 - Fix the permission processing of eventfs.

   The change to make the permissions of eventfs default to the mount
   point but keep track of when changes were made had a side effect that
   could cause security concerns. When the tracefs is remounted with a
   given gid or uid, all the files within it should inherit that gid or
   uid. But if the admin had changed the permission of some file within
   the tracefs file system, it would not get updated by the remount.

   This caused the kselftest of file permissions to fail the second time
   it is run. The first time, all changes would look fine, but the
   second time, because the changes were "saved", the remount did not
   reset them.

   Create a link list of all existing tracefs inodes, and clear the
   saved flags on them on a remount if the remount changes the
   corresponding gid or uid fields.

   This also simplifies the code by removing the distinction between the
   toplevel eventfs and an instance eventfs. They should both act the
   same. They were different because of a misconception due to the
   remount not resetting the flags. Now that remount resets all the
   files and directories to default to the root node if a uid/gid is
   specified, it makes the logic simpler to implement.

* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Have "events" directory get permissions from its parent
  eventfs: Do not treat events directory different than other directories
  eventfs: Do not differentiate the toplevel events directory
  tracefs: Still use mount point as default permissions for instances
  tracefs: Reset permissions on remount if permissions are options
  eventfs: Free all of the eventfs_inode after RCU
  eventfs/tracing: Add callback for release of an eventfs_inode

Pull dma-mapping fix from Christoph Hellwig:

 - fix the combination of restricted pools and dynamic swiotlb
   (Will Deacon)

* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes:

   - Avoid a deadlock in the Qualcomm clk driver by making the regulator
     which supplies the GDSC optional

   - Restore RPM clks on Qualcomm msm8976 by setting num_clks

   - Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
     temporarily reparenting the CPU clk to something that isn't being
     changed

   - Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
     on some devices

   - Revert back to of_match_device() in the Samsung clkout driver to
     get the match data based on the parent device's compatible string"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: Revert "clk: Use device_get_match_data()"
  clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
  clk: sunxi-ng: common: Support minimum and maximum rate
  clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
  clk: qcom: smd-rpm: Restore msm8976 num_clk
  clk: qcom: gdsc: treat optional supplies as optional

The events directory gets its permissions from the root inode. But this
can cause an inconsistency if the instances directory changes its
permissions, as the permissions of the created directories under it should
inherit the permissions of the instances directory when directories under
it are created.

Currently the behavior is:

 # cd /sys/kernel/tracing
 # chgrp 1002 instances
 # mkdir instances/foo
 # ls -l instances/foo
[..]
 -r--r-----  1 root lkp  0 May  1 18:55 buffer_total_size_kb
 -rw-r-----  1 root lkp  0 May  1 18:55 current_tracer
 -rw-r-----  1 root lkp  0 May  1 18:55 error_log
 drwxr-xr-x  1 root root 0 May  1 18:55 events
 --w-------  1 root lkp  0 May  1 18:55 free_buffer
 drwxr-x---  2 root lkp  0 May  1 18:55 options
 drwxr-x--- 10 root lkp  0 May  1 18:55 per_cpu
 -rw-r-----  1 root lkp  0 May  1 18:55 set_event

All the files and directories under "foo" has the "lkp" group except the
"events" directory. That's because its getting its default value from the
mount point instead of its parent.

Have the "events" directory make its default value based on its parent's
permissions. That now gives:

 # ls -l instances/foo
[..]
 -rw-r-----  1 root lkp 0 May  1 21:16 buffer_subbuf_size_kb
 -r--r-----  1 root lkp 0 May  1 21:16 buffer_total_size_kb
 -rw-r-----  1 root lkp 0 May  1 21:16 current_tracer
 -rw-r-----  1 root lkp 0 May  1 21:16 error_log
 drwxr-xr-x  1 root lkp 0 May  1 21:16 events
 --w-------  1 root lkp 0 May  1 21:16 free_buffer
 drwxr-x---  2 root lkp 0 May  1 21:16 options
 drwxr-x--- 10 root lkp 0 May  1 21:16 per_cpu
 -rw-r-----  1 root lkp 0 May  1 21:16 set_event

Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.161887248@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Treat the events directory the same as other directories when it comes to
permissions. The events directory was considered different because it's
dentry is persistent, whereas the other directory dentries are created
when accessed. But the way tracefs now does its ownership by using the
root dentry's permissions as the default permissions, the events directory
can get out of sync when a remount is performed setting the group and user
permissions.

Remove the special case for the events directory on setting the
attributes. This allows the updates caused by remount to work properly as
well as simplifies the code.

Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.002923579@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The toplevel events directory is really no different than the events
directory of instances. Having the two be different caused
inconsistencies and made it harder to fix the permissions bugs.

Make all events directories act the same.

Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.846448710@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If the instances directory's permissions were never change, then have it
and its children use the mount point permissions as the default.

Currently, the permissions of instance directories are determined by the
instance directory's permissions itself. But if the tracefs file system is
remounted and changes the permissions, the instance directory and its
children should use the new permission.

But because both the instance directory and its children use the instance
directory's inode for permissions, it misses the update.

To demonstrate this:

  # cd /sys/kernel/tracing/
  # mkdir instances/foo
  # ls -ld instances/foo
 drwxr-x--- 5 root root 0 May  1 19:07 instances/foo
  # ls -ld instances
 drwxr-x--- 3 root root 0 May  1 18:57 instances
  # ls -ld current_tracer
 -rw-r----- 1 root root 0 May  1 18:57 current_tracer

  # mount -o remount,gid=1002 .
  # ls -ld instances
 drwxr-x--- 3 root root 0 May  1 18:57 instances
  # ls -ld instances/foo/
 drwxr-x--- 5 root root 0 May  1 19:07 instances/foo/
  # ls -ld current_tracer
 -rw-r----- 1 root lkp 0 May  1 18:57 current_tracer

Notice that changing the group id to that of "lkp" did not affect the
instances directory nor its children. It should have been:

  # ls -ld current_tracer
 -rw-r----- 1 root root 0 May  1 19:19 current_tracer
  # ls -ld instances/foo/
 drwxr-x--- 5 root root 0 May  1 19:25 instances/foo/
  # ls -ld instances
 drwxr-x--- 3 root root 0 May  1 19:19 instances

  # mount -o remount,gid=1002 .
  # ls -ld current_tracer
 -rw-r----- 1 root lkp 0 May  1 19:19 current_tracer
  # ls -ld instances
 drwxr-x--- 3 root lkp 0 May  1 19:19 instances
  # ls -ld instances/foo/
 drwxr-x--- 5 root lkp 0 May  1 19:25 instances/foo/

Where all files were updated by the remount gid update.

Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.686838327@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).

But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.

This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.

For example:

 # cd /sys/kernel/tracing
 # chgrp 1002 current_tracer
 # ls -l
[..]
 -rw-r-----  1 root root 0 May  1 21:25 buffer_size_kb
 -rw-r-----  1 root root 0 May  1 21:25 buffer_subbuf_size_kb
 -r--r-----  1 root root 0 May  1 21:25 buffer_total_size_kb
 -rw-r-----  1 root lkp  0 May  1 21:25 current_tracer
 -rw-r-----  1 root root 0 May  1 21:25 dynamic_events
 -r--r-----  1 root root 0 May  1 21:25 dyn_ftrace_total_info
 -r--r-----  1 root root 0 May  1 21:25 enabled_functions

Where current_tracer now has group "lkp".

 # mount -o remount,gid=1001 .
 # ls -l
 -rw-r-----  1 root tracing 0 May  1 21:25 buffer_size_kb
 -rw-r-----  1 root tracing 0 May  1 21:25 buffer_subbuf_size_kb
 -r--r-----  1 root tracing 0 May  1 21:25 buffer_total_size_kb
 -rw-r-----  1 root lkp     0 May  1 21:25 current_tracer
 -rw-r-----  1 root tracing 0 May  1 21:25 dynamic_events
 -r--r-----  1 root tracing 0 May  1 21:25 dyn_ftrace_total_info
 -r--r-----  1 root tracing 0 May  1 21:25 enabled_functions

Everything changed but the "current_tracer".

Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories.

Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.529542160@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The freeing of eventfs_inode via a kfree_rcu() callback. But the content
of the eventfs_inode was being freed after the last kref. This is
dangerous, as changes are being made that can access the content of an
eventfs_inode from an RCU loop.

Instead of using kfree_rcu() use call_rcu() that calls a function to do
all the freeing of the eventfs_inode after a RCU grace period has expired.

Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.370261163@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 43aa6f97 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:

With two scripts 'A' and 'B' doing:

  Script 'A':
    echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
    while :
    do
      echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
    done

  Script 'B':
    echo > /sys/kernel/tracing/synthetic_events

Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.

Script 'B' removes all synthetic events (including the newly created
"hello" event).

What happens is that the opening of the "enable" file has:

 {
	struct trace_event_file *file = inode->i_private;
	int ret;

	ret = tracing_check_open_get_tr(file->tr);
 [..]

But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".

The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.

Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.

This will protect the tracing file from being freed while a eventfs file
that references it is being opened.

Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull cxl fix from Dave Jiang:
 "Add missing RCH support for endpoint access_coordinate calculation.

  A late bug was reported by Robert Richter that the Restricted CXL Host
  (RCH) support was missing in the CXL endpoint access_coordinate
  calculation.

  The missing support causes the topology iterator to stumble over a
  NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
  support.

  The fix bypasses RCH topology as the access_coordinate calculation is
  not necessary since RCH does not support hotplug and the memory region
  exported should be covered by the HMAT table already.

  A unit test is also added to cxl_test to check against future
  regressions on the topology iterator"

* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH

Pull xen fixes from Juergen Gross:
 "Two fixes when running as Xen PV guests for issues introduced in the
  6.9 merge window, both related to apic id handling"

* tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: return a sane initial apic id when running as PV guest
  x86/xen/smp_pv: Register the boot CPU APIC properly

Pull EFI fix from Ard Biesheuvel:
 "This works around a shortcoming in the memory acceptation API, which
  may apparently hog the CPU for long enough to trigger the softlockup
  watchdog.

  Note that this only affects confidential VMs running under the Intel
  TDX hypervisor, which is why I accepted this for now, but this should
  obviously be fixed properly in the future"

* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: touch soft lockup during memory accept

Pull block fixes from Jens Axboe:
 "Nothing major in here - an nvme pull request with mostly auth/tcp
  fixes, and a single fix for ublk not setting segment count and size
  limits"

* tag 'block-6.9-20240503' of git://git.kernel.dk/linux:
  nvme-tcp: strict pdu pacing to avoid send stalls on TLS
  nvmet: fix nvme status code when namespace is disabled
  nvmet-tcp: fix possible memory leak when tearing down a controller
  nvme: cancel pending I/O if nvme controller is in terminal state
  nvmet-auth: replace pr_debug() with pr_err() to report an error.
  nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
  nvme: find numa distance only if controller has valid numa id
  ublk: remove segment count and size limits
  nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH

Pull sound fixes from Takashi Iwai:
 "As usual in a late stage, we received a fair amount of fixes for ASoC,
  and it became bigger than wished. But all fixes are rather device-
  specific, and they look pretty safe to apply.

  A major par of changes are series of fixes for ASoC meson and SOF
  drivers as well as for Realtek and Cirrus codecs. In addition, recent
  emu10k1 regression fixes and usual HD-audio quirks are included"

* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
  ALSA: hda/realtek: Fix build error without CONFIG_PM
  ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
  ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
  ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
  ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
  ASoC: cs35l56: fix usages of device_get_named_child_node()
  ASoC: da7219-aad: fix usage of device_get_named_child_node()
  ASoC: meson: cards: select SND_DYNAMIC_MINORS
  ASoC: meson: axg-tdm: add continuous clock support
  ASoC: meson: axg-tdm-interface: manage formatters in trigger
  ASoC: meson: axg-card: make links nonatomic
  ASoC: meson: axg-fifo: use threaded irq to check periods
  ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
  ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
  ALSA: emu10k1: fix E-MU dock initialization
  ALSA: emu10k1: use mutex for E-MU FPGA access locking
  ALSA: emu10k1: move the whole GPIO event handling to the workqueue
  ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
  ALSA: emu10k1: fix E-MU card dock presence monitoring
  ASoC: rt715-sdca: volume step modification
  ...

Pull drm fixes from Dave Airlie:
 "Weekly fixes, mostly made up from amdgpu and some panel changes.

  Otherwise xe, nouveau, vmwgfx and a couple of others, all seems pretty
  on track.

  amdgpu:
   - Fix VRAM memory accounting
   - DCN 3.1 fixes
   - DCN 2.0 fix
   - DCN 3.1.5 fix
   - DCN 3.5 fix
   - DCN 3.2.1 fix
   - DP fixes
   - Seamless boot fix
   - Fix call order in amdgpu_ttm_move()
   - Fix doorbell regression
   - Disable panel replay temporarily

  amdkfd:
   - Flush wq before creating kfd process

  xe:
   - Fix UAF on rebind worker
   - Fix ADL-N display integration

  imagination:
   - fix page-count macro

  nouveau:
   - avoid page-table allocation failures
   - fix firmware memory allocation

  panel:
   - ili9341: avoid OF for device properties; respect deferred probe;
     fix usage of errno codes

  ttm:
   - fix status output

  vmwgfx:
   - fix legacy display unit
   - fix read length in fence signalling"

* tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
  drm/xe/display: Fix ADL-N detection
  drm/panel: ili9341: Use predefined error codes
  drm/panel: ili9341: Respect deferred probe
  drm/panel: ili9341: Correct use of device property APIs
  drm/xe/vm: prevent UAF in rebind_work_func()
  drm/amd/display: Disable panel replay by default for now
  drm/amdgpu: fix doorbell regression
  drm/amdkfd: Flush the process wq before creating a kfd_process
  drm/amd/display: Disable seamless boot on 128b/132b encoding
  drm/amd/display: Fix DC mode screen flickering on DCN321
  drm/amd/display: Add VCO speed parameter for DCN31 FPU
  drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
  drm/amd/display: Allocate zero bw after bw alloc enable
  drm/amd/display: Fix incorrect DSC instance for MST
  drm/amd/display: Atom Integrated System Info v2_2 for DCN35
  drm/amd/display: Add dtbclk access to dcn315
  drm/amd/display: Ensure that dmcub support flag is set for DCN20
  drm/amd/display: Handle Y carry-over in VCP X.Y calculation
  drm/amdgpu: Fix VRAM memory accounting
  drm/vmwgfx: Fix invalid reads in fence signaled events
  ...

Pull spi fixes from Mark Brown:
 "A few small fixes for v6.9,

  The core fix is for issues with reuse of a spi_message in the case
  where we've got queued messages (a relatively rare occurrence with
  modern code so it wasn't noticed in testing).

  We also avoid an issue with the Kunpeng driver by simply removing the
  debug interface that could trigger it, and address issues with
  confusing and corrupted output when printing the IP version of the AXI
  SPI engine"

* tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix null pointer dereference within spi_sync
  spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs
  spi: axi-spi-engine: fix version format string

In current driver qcom_slim_ngd_up_worker() indefinitely
waiting for ctrl->qmi_up completion object. This is
resulting in workqueue lockup on Kthread.

Added wait_for_completion_interruptible_timeout to
allow the thread to wait for specific timeout period and
bail out instead waiting infinitely.

Fixes: a899d324 ("slimbus: qcom-ngd-ctrl: add Sub System Restart support")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430091238.35209-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'drm-misc-fixes-2024-05-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

imagination:
- fix page-count macro

nouveau:
- avoid page-table allocation failures
- fix firmware memory allocation

panel:
- ili9341: avoid OF for device properties; respect deferred probe; fix
usage of errno codes

ttm:
- fix status output

vmwgfx:
- fix legacy display unit
- fix read length in fence signalling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502192117.GA12158@linux.fritz.box

- Fix UAF on rebind worker
- Fix ADL-N display integration
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6bontwst3mbxozs6u3ad5n3g5zmaucrngbfwv4hkfhpscnwlym@wlwjgjx6pwue

Merge tag 'amd-drm-fixes-6.9-2024-05-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.9-2024-05-01:

amdgpu:
- Fix VRAM memory accounting
- DCN 3.1 fixes
- DCN 2.0 fix
- DCN 3.1.5 fix
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP fixes
- Seamless boot fix
- Fix call order in amdgpu_ttm_move()
- Fix doorbell regression
- Disable panel replay temporarily

amdkfd:
- Flush wq before creating kfd process
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240501135054.1919108-1-alexander.deucher@amd.com

Pull btrfs fixes from David Sterba:

 - set correct ram_bytes when splitting ordered extent. This can be
   inconsistent on-disk but harmless as it's not used for calculations
   and it's only advisory for compression

 - fix lockdep splat when taking cleaner mutex in qgroups disable ioctl

 - fix missing mutex unlock on error path when looking up sys chunk for
   relocation

* tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: set correct ram_bytes when splitting ordered extent
  btrfs: take the cleaner_mutex earlier in qgroup disable
  btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()

Pull s390 fixes from Alexander Gordeev:

 - The function __storage_key_init_range() expects the end address to be
   the first byte outside the range to be initialized. Fix the callers
   that provide the last byte within the range instead.

 - 3270 Channel Command Word (CCW) may contain zero data address in case
   there is no data in the request. Add data availability check to avoid
   erroneous non-zero value as result of virt_to_dma32(NULL) application
   in cases there is no data

 - Add missing CFI directives for an unwinder to restore the return
   address in the vDSO assembler code

 - NUL-terminate kernel buffer when duplicating user space memory region
   on Channel IO (CIO) debugfs write inject

 - Fix wrong format string in zcrypt debug output

 - Return -EBUSY code when a CCA card is temporarily unavailabile

 - Restore a loop that retries derivation of a protected key from a
   secure key in cases the low level reports temporarily unavailability
   with -EBUSY code

* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/paes: Reestablish retry loop in paes
  s390/zcrypt: Use EBUSY to indicate temp unavailability
  s390/zcrypt: Handle ep11 cprb return code
  s390/zcrypt: Fix wrong format string in debug feature printout
  s390/cio: Ensure the copied buf is NUL terminated
  s390/vdso: Add CFI for RA register to asm macro vdso_func
  s390/3270: Fix buffer assignment
  s390/mm: Fix clearing storage keys for huge pages
  s390/mm: Fix storage key clearing for guest huge pages

Pull xtensa fixes from Max Filippov:

 - fix unused variable warning caused by empty flush_dcache_page()
   definition

 - fix stack unwinding on windowed noMMU XIP configurations

 - fix Coccinelle warning 'opportunity for min()' in xtensa ISS platform
   code

* tag 'xtensa-20240502' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: remove redundant flush_dcache_page and ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE macros
  tty: xtensa/iss: Use min() to fix Coccinelle warning
  xtensa: fix MAKE_PC_FROM_RA second argument

With recent sanity checks for topology information added, there are now
warnings issued for APs when running as a Xen PV guest:

  [Firmware Bug]: CPU   1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0001

This is due to the initial APIC ID obtained via CPUID for PV guests is
always 0.

Avoid the warnings by synthesizing the CPUID data to contain the same
initial APIC ID as xen_pv_smp_config() is using for registering the
APIC IDs of all CPUs.

Fixes: 52128a7a ("86/cpu/topology: Make the APIC mismatch warnings complete")
Signed-off-by: Juergen Gross <jgross@suse.com>

Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.

Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.

Fix warning when initializing display:

	xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
	------------[ cut here ]------------
	xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))

And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cb)
Fixes: 44e69495 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "Two driver fixes:

   - The firewire-ohci driver for 1394 OHCI hardware does not fill time
     stamp for response packet when handling asynchronous transaction to
     local destination. This brings an inconvenience that the response
     packet is not equivalent between the transaction to local and
     remote. It is fixed by fulfilling the time stamp with hardware
     time. The fix should be applied to Linux kernel v6.5 or later as
     well.

   - The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has
     long-standing issue about the behaviour when user space application
     passes less size of buffer than expected. It is fixed by returning
     zero according to the convention of UNIX-like systems"

* tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: fulfill timestamp for some local asynchronous transaction
  firewire: nosy: ensure user_length is taken into account when fetching packet contents

The topology core expects the boot APIC to be registered from earhy APIC
detection first and then again when the firmware tables are evaluated. This
is used for detecting the real BSP CPU on a kexec kernel.

The recent conversion of XEN/PV to register fake APIC IDs failed to
register the boot CPU APIC correctly as it only registers it once. This
causes the BSP detection mechanism to trigger wrongly:

   CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 0 > 1

Additionally this results in one CPU being ignored.

Register the boot CPU APIC twice so that the XEN/PV fake enumeration
behaves like real firmware.
Reported-by: Juergen Gross <jgross@suse.com>
Fixes: e7530702 ("x86/xen/smp_pv: Register fake APICs")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87a5l8s2fg.ffs@tglxSigned-off-by: Juergen Gross <jgross@suse.com>

Pull thermal control fixes from Rafael Wysocki:
 "Fix a memory leak and a few locking issues (that may cause the kernel
  to crash in principle if all goes wrong) in the thermal debug code
  introduced during the 6.8 development cycle"

* tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Prevent use-after-free from occurring after cdev removal
  thermal/debugfs: Fix two locking issues with thermal zone debug
  thermal/debugfs: Free all thermal zone debug memory on zone removal