Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers()
for each individual queue. But when later passing the SBAL addresses to
qdio_establish(), they need to be in a single array of pointers.
So if the driver uses multiple Input or Output queues, it needs to
allocate a temporary array just to present all its SBAL pointers in this
layout.

This patch slightly changes the format of the QDIO initialization data,
so that drivers can pass a per-queue array where each element points to
a queue's SBAL array.
zfcp doesn't use multiple queues, so the impact there is trivial.
For qeth this brings a nice reduction in complexity, and removes
a page-sized allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

In preparation for a subsequent patch, move the setup of init_data into
the only caller.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

All that qdio_allocate() actually uses from the init_data is the cdev,
and the number of Input and Output Queues. Have the driver pass those as
parameters, and defer the init_data processing into qdio_establish().
This includes writing per-device(!) trace entries, and most of the
sanity checks.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Pull s390 updates from Vasily Gorbik:

 - Update maintainers. Niklas Schnelle takes over zpci and Vineeth
   Vijayan common io code.

 - Extend cpuinfo to include topology information.

 - Add new extended counters for IBM z15 and sampling buffer allocation
   rework in perf code.

 - Add control over zeroing out memory during system restart.

 - CCA protected key block version 2 support and other
   fixes/improvements in crypto code.

 - Convert to new fallthrough; annotations.

 - Replace zero-length arrays with flexible-arrays.

 - QDIO debugfs and other small improvements.

 - Drop 2-level paging support optimization for compat tasks. Varios mm
   cleanups.

 - Remove broken and unused hibernate / power management support.

 - Remove fake numa support which does not bring any benefits.

 - Exclude offline CPUs from CPU topology masks to be more consistent
   with other architectures.

 - Prevent last branching instruction address leaking to userspace.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits)
  s390/mm: cleanup init_new_context() callback
  s390/mm: cleanup virtual memory constants usage
  s390/mm: remove page table downgrade support
  s390/qdio: set qdio_irq->cdev at allocation time
  s390/qdio: remove unused function declarations
  s390/ccwgroup: remove pm support
  s390/ap: remove power management code from ap bus and drivers
  s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc
  s390/mm: cleanup arch_get_unmapped_area() and friends
  s390/ism: remove pm support
  s390/cio: use fallthrough;
  s390/vfio: use fallthrough;
  s390/zcrypt: use fallthrough;
  s390: use fallthrough;
  s390/cpum_sf: Fix wrong page count in error message
  s390/diag: fix display of diagnose call statistics
  s390/ap: Remove ap device suspend and resume callbacks
  s390/pci: Improve handling of unset UID
  s390/pci: Fix zpci_alloc_domain() over allocation
  s390/qdio: pass ISC as parameter to chsc_sadc()
  ...

Pull ARC updates from Vineet Gupta:

 - Support for DSP enabled userspace (save/restore regs)

 - Misc other platform fixes

* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: allow userspace DSP applications to use AGU extensions
  ARC: add support for DSP-enabled userspace applications
  ARC: handle DSP presence in HW
  ARC: add helpers to sanitize config options
  ARC: [plat-axs10x]: PGU: remove unused encoder-slave property

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "As usual, tons of new drivers and other options got merged and are now
  enabled in the defconfig files, usually as loadable modules"

* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
  ARM: omap2plus_defconfig: Update for moved and dropped options
  ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
  ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable zram as loadable modules
  ARM: omap2plus_defconfig: Enable simple-pm-bus
  arm64: defconfig: Enable Qualcomm SDM845 audio configs
  arm64: defconfig: Enable e1000 device
  arm64: defconfig: Enable PHY devices used on QorIQ boards
  arm64: defconfig: Enable RTC devices for QorIQ boards
  arm64: defconfig: Enable flash device drivers for QorIQ boards
  arm64: defconfig: Enable ARM Mali display driver
  arm64: defconfig: Enable QorIQ GPIO driver
  arm64: defconfig: Enable QorIQ IFC NAND controller driver
  arm64: defconfig: Enable ARM SBSA watchdog driver
  arm64: defconfig: Enable QorIQ cpufreq driver
  arm64: defconfig: Enable NXP/FSL SPI controller drivers
  arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
  arm64: defconfig: Enable QorIQ DPAA2 drivers
  arm64: defconfig: Enable QorIQ DPAA1 drivers
  ...

Pull ARM driver updates from Arnd Bergmann:
 "These are the usual updates for SoC specific device drivers and
  related subsystems that don't have their own top-level maintainers:

   - ARM SCMI/SCPI updates to allow pluggable transport layers

   - TEE subsystem cleanups

   - A new driver for the Amlogic secure power domain controller

   - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
     and TI OMAP2+ sysc drivers.

   - Qualcomm SoC driver updates, including a new library module for
     "protection domain" notifications

   - Lots of smaller bugfixes and cleanups in other drivers"

* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
  soc: fsl: qe: fix sparse warnings for ucc_slow.c
  soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
  soc: fsl: qe: fix sparse warnings for ucc_fast.c
  soc: fsl: qe: fix sparse warnings for qe_ic.c
  soc: fsl: qe: fix sparse warnings for ucc.c
  soc: fsl: qe: fix sparse warning for qe_common.c
  soc: fsl: qe: fix sparse warnings for qe.c
  soc: qcom: Fix QCOM_APR dependencies
  soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
  soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
  firmware: imx: add COMPILE_TEST for IMX_SCU driver
  soc: imx: gpc: fix power up sequencing
  soc: imx: increase build coverage for imx8m soc driver
  soc: qcom: apr: Add avs/audio tracking functionality
  dt-bindings: soc: qcom: apr: Add protection domain bindings
  soc: qcom: Introduce Protection Domain Restart helpers
  devicetree: bindings: firmware: add ipq806x to qcom_scm
  memory: tegra: Correct debugfs clk rate-range on Tegra124
  memory: tegra: Correct debugfs clk rate-range on Tegra30
  memory: tegra: Correct debugfs clk rate-range on Tegra20
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...

Merge tag 'for-5.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix excessive bio splitting that caused performance regressions

 - Fix logic bug in DM integrity discard support's integrity tag testing

 - Fix DM integrity warning on ppc64le due to missing cast

* tag 'for-5.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: fix logic bug in integrity tag testing
  Revert "dm: always call blk_queue_split() in dm_process_bio()"
  dm integrity: fix ppc64le warning

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)

   - Add more 32 GT/s link speed decoding and improve the implementation
     (Yicong Yang)

  Resource management:

   - Add support for sizing programmable host bridge apertures and fix a
     related alpha Nautilus regression (Ivan Kokshaysky)

  Interrupts:

   - Add boot interrupt quirk mechanism for Xeon chipsets and document
     boot interrupts (Sean V Kelley)

  PCIe native device hotplug:

   - When possible, disable in-band presence detect and use PDS
     (Alexandru Gagniuc)

   - Add DMI table for devices that don't use in-band presence detection
     but don't advertise that correctly (Stuart Hayes)

   - Fix hang when powering slots up/down via sysfs (Lukas Wunner)

   - Fix an MSI interrupt race (Stuart Hayes)

  Virtualization:

   - Add ACS quirks for Zhaoxin devices (Raymond Pang)

  Error handling:

   - Add Error Disconnect Recover (EDR) support so firmware can report
     devices disconnected via DPC and we can try to recover (Kuppuswamy
     Sathyanarayanan)

  Peer-to-peer DMA:

   - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
     Maier)

  ASPM:

   - Reduce severity of common clock config message (Chris Packham)

   - Clear the correct bits when enabling L1 substates, so we don't go
     to the wrong state (Yicong Yang)

  Endpoint framework:

   - Replace EPF linkup ops with notifier call chain and improve locking
     (Kishon Vijay Abraham I)

   - Fix concurrent memory allocation in OB address region (Kishon Vijay
     Abraham I)

   - Move PF function number assignment to EPC core to support multiple
     function creation methods (Kishon Vijay Abraham I)

   - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)

   - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
     Offset (Kishon Vijay Abraham I)

   - Add support for testing DMA transfers (Kishon Vijay Abraham I)

   - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)

   - Add support for tests to clear IRQ (Kishon Vijay Abraham I)

   - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)

  Amlogic Meson PCIe controller driver:

   - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
     Pommarel)

   - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
     Pommarel)

  Cadence PCIe controller driver:

   - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:

   - Add two VMD Device IDs that require bus restriction mode (Sushma
     Kalakota)

  Mobiveil PCIe controller driver:

   - Refactor and modularize mobiveil driver (Hou Zhiqiang)

   - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)

  Microsoft Hyper-V host bridge driver:

   - Add support for Hyper-V PCI protocol version 1.3 and
     PCI_BUS_RELATIONS2 (Long Li)

   - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
     Feng)

   - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:

   - Use pci_parse_request_of_pci_ranges() (Rob Herring)

   - Add support for endpoint mode and related DT updates (Vidya Sagar)

   - Reduce -EPROBE_DEFER error message log level (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)

  Synopsys DesignWare PCIe controller driver:

   - Refactor core initialization code for endpoint mode (Vidya Sagar)

   - Fix endpoint MSI-X to use correct table address (Kishon Vijay
     Abraham I)

  TI DRA7xx PCIe controller driver:

   - Fix MSI IRQ handling (Vignesh Raghavendra)

  TI Keystone PCIe controller driver:

   - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)

  Miscellaneous:

   - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
     Feng)

   - Use ioremap(), not phys_to_virt(), for platform ROM to fix video
     ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"

* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
  misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
  PCI: tegra: Print -EPROBE_DEFER error message at debug level
  misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
  misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
  tools: PCI: Add 'e' to clear IRQ
  misc: pci_endpoint_test: Add ioctl to clear IRQ
  misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
  PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
  PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
  PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
  misc: pci_endpoint_test: Add support to get DMA option from userspace
  tools: PCI: Add 'd' command line option to support DMA
  misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
  PCI: endpoint: functions/pci-epf-test: Print throughput information
  PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
  PCI: pciehp: Fix MSI interrupt race
  PCI: pciehp: Fix indefinite wait on sysfs requests
  PCI: endpoint: Fix clearing start entry in configfs
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194
  PCI: sysfs: Revert "rescan" file renames
  ...

Include originally "late" updates for OMAP and Qualcomm,
now that it's not late any more.

* arm/late: (122 commits)
  ARM: OMAP2+: Drop legacy platform data for ti81xx edma
  ARM: dts: Configure interconnect target module for ti816x edma
  ARM: dts: Configure interconnect target module for dm814x tptc3
  ARM: dts: Configure interconnect target module for dm814x tptc2
  ARM: dts: Configure interconnect target module for dm814x tptc1
  ARM: dts: Configure interconnect target module for dm814x tptc0
  ARM: dts: Configure interconnect target module for dm814x tpcc
  ARM: OMAP2+: Drop legacy platform data for dm814x cpsw
  ARM: dts: Configure interconnect target module for dm814x cpsw
  clk: ti: Fix dm814x clkctrl for ethernet
  arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
  arm64: dts: sdm845: add IPA information
  arm64: dts: qcom: db845c: add analog audio support
  arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
  arm64: dts: qcom: c630: Enable audio support
  arm64: dts: qcom: sdm845: add apr nodes
  arm64: dts: qcom: sdm845: add slimbus nodes
  arm64: dts: qcom: sc7180: Update reg names for SDHC
  arm64: dts: qcom: qcs404: Enable CQE support for eMMC
  arm64: dts: msm8916: Add fastrpc node
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...

Pull SPDX updates from Greg KH:
 "Here are three SPDX patches for 5.7-rc1.

  One fixes up the SPDX tag for a single driver, while the other two go
  through the tree and add SPDX tags for all of the .gitignore files as
  needed.

  Nothing too complex, but you will get a merge conflict with your
  current tree, that should be trivial to handle (one file modified by
  two things, one file deleted.)

  All three of these have been in linux-next for a while, with no
  reported issues other than the merge conflict"

* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  ASoC: MT6660: make spdxcheck.py happy
  .gitignore: add SPDX License Identifier
  .gitignore: remove too obvious comments

Pull xen updates from Juergen Gross:

 - a cleanup patch removing an unused function

 - a small fix for the xen pciback driver

 - a series for making the unwinder hyppay with the Xen PV guest idle
   task stacks

* tag 'for-linus-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: Make the secondary CPU idle tasks reliable
  x86/xen: Make the boot CPU idle task reliable
  xen-pciback: fix INTERRUPT_TYPE_* defines
  xen/xenbus: remove unused xenbus_map_ring()

Pull workqueue updates from Tejun Heo:
 "Nothing too interesting. Just two trivial patches"

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Mark up unlocked access to wq->first_flusher
  workqueue: Make workqueue_init*() return void

Pull cgroup updates from Tejun Heo:

 - Christian extended clone3 so that processes can be spawned into
   cgroups directly.

   This is not only neat in terms of semantics but also avoids grabbing
   the global cgroup_threadgroup_rwsem for migration.

 - Daniel added !root xattr support to cgroupfs.

   Userland already uses xattrs on cgroupfs for bookkeeping. This will
   allow delegated cgroups to support such usages.

 - Prateek tried to make cpuset hotplug handling synchronous but that
   led to possible deadlock scenarios. Reverted.

 - Other minor changes including release_agent_path handling cleanup.

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1: Document the cpuset_v2_mode mount option
  Revert "cpuset: Make cpuset hotplug synchronous"
  cgroupfs: Support user xattrs
  kernfs: Add option to enable user xattrs
  kernfs: Add removed_size out param for simple_xattr_set
  kernfs: kvmalloc xattr value instead of kmalloc
  cgroup: Restructure release_agent_path handling
  selftests/cgroup: add tests for cloning into cgroups
  clone3: allow spawning processes into cgroups
  cgroup: add cgroup_may_write() helper
  cgroup: refactor fork helpers
  cgroup: add cgroup_get_from_file() helper
  cgroup: unify attach permission checking
  cpuset: Make cpuset hotplug synchronous
  cgroup.c: Use built-in RCU list checking
  kselftest/cgroup: add cgroup destruction test
  cgroup: Clean up css_set task traversal

Pull kgdb updates from Daniel Thompson:
 "Pretty quiet this cycle. Just a couple of small fixes from myself both
  of which were reviewed by Doug Anderson to keep me honest (thanks)"

* tag 'kgdb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Censor attempts to set PROMPT without ENABLE_MEM_READ
  kdb: Eliminate strncpy() warnings by replacing with strscpy()

Pull ARM updates from Russell King:

 - replace setup_irq() with request_irq() for ebsa110, footbridge, rpc

 - fix clang assembly error in kexec code

 - remove .fixup section in boot stub

 - decompressor / EFI cache flushing updates

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8966/1: rpc: replace setup_irq() by request_irq()
  ARM: 8965/2: footbridge: replace setup_irq() by request_irq()
  ARM: 8964/1: ebsa110: replace setup_irq() by request_irq()
  ARM: 8962/1: kexec: drop invalid assembly argument
  ARM: decompressor: switch to by-VA cache maintenance for v7 cores
  ARM: decompressor: prepare cache_clean_flush for doing by-VA maintenance
  ARM: decompressor: factor out routine to obtain the inflated image size
  ARM: 8959/1: Remove unused .fixup section in boot stub
  ARM: allow unwinder to unwind recursive functions

When building arm allyesconfig:

drivers/remoteproc/omap_remoteproc.c:174:44: error: too many arguments
to function call, expected 2, have 3
        timer->timer_ops->set_load(timer->odt, 0, 0);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~                ^
1 error generated.

This is due to commit 02e6d546 ("clocksource/drivers/timer-ti-dm:
Enable autoreload in set_pwm") in the clockevents tree interacting with
commit e28edc57 ("remoteproc/omap: Request a timer(s) for remoteproc
usage") from the rpmsg tree.

This should have been fixed during the merge of the remoteproc tree
since it happened after the clockevents tree merge; however, it does not
look like my email was noticed by either maintainer and I did not pay
attention when the pull was sent since I was on CC.

Fixes: c6570114 ("Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc")
Link: https://lore.kernel.org/lkml/20200327185055.GA22438@ubuntu-m2-xlarge-x86/Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If all the bytes are equal to DISCARD_FILLER, we want to accept the
buffer. If any of the bytes are different, we must do thorough
tag-by-tag checking.

The condition was inverted.

Fixes: 84597a44 ("dm integrity: add optional discard support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The cpuset in cgroup v1 accepts a special "cpuset_v2_mode" mount
option that make cpuset.cpus and cpuset.mems behave more like those in
cgroup v2.  Document it to make other people more aware of this feature
that can be useful in some circumstances.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This reverts commit effd58c9.

blk_queue_split() is causing excessive IO splitting -- because
blk_max_size_offset() depends on 'chunk_sectors' limit being set and
if it isn't (as is the case for DM targets!) it falls back to
splitting on a 'max_sectors' boundary regardless of offset.

"Fix" this by reverting back to _not_ using blk_queue_split() in
dm_process_bio() for normal IO (reads and writes).  Long-term fix is
still TBD but it should focus on training blk_max_size_offset() to
call into a DM provided hook (to call DM's max_io_len()).

Test results from simple misaligned IO test on 4-way dm-striped device
with chunksize of 128K and stripesize of 512K:

xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev

before this revert:

253,0   21        1     0.000000000  2206  Q   R 224 + 4072 [xfs_io]
253,0   21        2     0.000008267  2206  X   R 224 / 480 [xfs_io]
253,0   21        3     0.000010530  2206  X   R 224 / 256 [xfs_io]
253,0   21        4     0.000027022  2206  X   R 480 / 736 [xfs_io]
253,0   21        5     0.000028751  2206  X   R 480 / 512 [xfs_io]
253,0   21        6     0.000033323  2206  X   R 736 / 992 [xfs_io]
253,0   21        7     0.000035130  2206  X   R 736 / 768 [xfs_io]
253,0   21        8     0.000039146  2206  X   R 992 / 1248 [xfs_io]
253,0   21        9     0.000040734  2206  X   R 992 / 1024 [xfs_io]
253,0   21       10     0.000044694  2206  X   R 1248 / 1504 [xfs_io]
253,0   21       11     0.000046422  2206  X   R 1248 / 1280 [xfs_io]
253,0   21       12     0.000050376  2206  X   R 1504 / 1760 [xfs_io]
253,0   21       13     0.000051974  2206  X   R 1504 / 1536 [xfs_io]
253,0   21       14     0.000055881  2206  X   R 1760 / 2016 [xfs_io]
253,0   21       15     0.000057462  2206  X   R 1760 / 1792 [xfs_io]
253,0   21       16     0.000060999  2206  X   R 2016 / 2272 [xfs_io]
253,0   21       17     0.000062489  2206  X   R 2016 / 2048 [xfs_io]
253,0   21       18     0.000066133  2206  X   R 2272 / 2528 [xfs_io]
253,0   21       19     0.000067507  2206  X   R 2272 / 2304 [xfs_io]
253,0   21       20     0.000071136  2206  X   R 2528 / 2784 [xfs_io]
253,0   21       21     0.000072764  2206  X   R 2528 / 2560 [xfs_io]
253,0   21       22     0.000076185  2206  X   R 2784 / 3040 [xfs_io]
253,0   21       23     0.000077486  2206  X   R 2784 / 2816 [xfs_io]
253,0   21       24     0.000080885  2206  X   R 3040 / 3296 [xfs_io]
253,0   21       25     0.000082316  2206  X   R 3040 / 3072 [xfs_io]
253,0   21       26     0.000085788  2206  X   R 3296 / 3552 [xfs_io]
253,0   21       27     0.000087096  2206  X   R 3296 / 3328 [xfs_io]
253,0   21       28     0.000093469  2206  X   R 3552 / 3808 [xfs_io]
253,0   21       29     0.000095186  2206  X   R 3552 / 3584 [xfs_io]
253,0   21       30     0.000099228  2206  X   R 3808 / 4064 [xfs_io]
253,0   21       31     0.000101062  2206  X   R 3808 / 3840 [xfs_io]
253,0   21       32     0.000104956  2206  X   R 4064 / 4096 [xfs_io]
253,0   21       33     0.001138823     0  C   R 4096 + 200 [0]

after this revert:

253,0   18        1     0.000000000  4430  Q   R 224 + 3896 [xfs_io]
253,0   18        2     0.000018359  4430  X   R 224 / 256 [xfs_io]
253,0   18        3     0.000028898  4430  X   R 256 / 512 [xfs_io]
253,0   18        4     0.000033535  4430  X   R 512 / 768 [xfs_io]
253,0   18        5     0.000065684  4430  X   R 768 / 1024 [xfs_io]
253,0   18        6     0.000091695  4430  X   R 1024 / 1280 [xfs_io]
253,0   18        7     0.000098494  4430  X   R 1280 / 1536 [xfs_io]
253,0   18        8     0.000114069  4430  X   R 1536 / 1792 [xfs_io]
253,0   18        9     0.000129483  4430  X   R 1792 / 2048 [xfs_io]
253,0   18       10     0.000136759  4430  X   R 2048 / 2304 [xfs_io]
253,0   18       11     0.000152412  4430  X   R 2304 / 2560 [xfs_io]
253,0   18       12     0.000160758  4430  X   R 2560 / 2816 [xfs_io]
253,0   18       13     0.000183385  4430  X   R 2816 / 3072 [xfs_io]
253,0   18       14     0.000190797  4430  X   R 3072 / 3328 [xfs_io]
253,0   18       15     0.000197667  4430  X   R 3328 / 3584 [xfs_io]
253,0   18       16     0.000218751  4430  X   R 3584 / 3840 [xfs_io]
253,0   18       17     0.000226005  4430  X   R 3840 / 4096 [xfs_io]
253,0   18       18     0.000250404  4430  Q   R 4120 + 176 [xfs_io]
253,0   18       19     0.000847708     0  C   R 4096 + 24 [0]
253,0   18       20     0.000855783     0  C   R 4120 + 176 [0]

Fixes: effd58c9 ("dm: always call blk_queue_split() in dm_process_bio()")
Cc: stable@vger.kernel.org
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This reverts commit a49e4629 ("cpuset: Make cpuset hotplug synchronous") as
it may deadlock with cpu hotplug path.

Link: http://lkml.kernel.org/r/F0388D99-84D7-453B-9B6B-EEFF0E7BE4CC@lca.pwSigned-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Prateek Sood <prsood@codeaurora.org>

Otherwise:

In file included from drivers/md/dm-integrity.c:13:
drivers/md/dm-integrity.c: In function 'dm_integrity_status':
drivers/md/dm-integrity.c:3061:10: error: format '%llu' expects
argument of type 'long long unsigned int', but argument 4 has type
'long int' [-Werror=format=]
   DMEMIT("%llu %llu",
          ^~~~~~~~~~~
    atomic64_read(&ic->number_of_mismatches),
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device-mapper.h:550:46: note: in definition of macro 'DMEMIT'
      0 : scnprintf(result + sz, maxlen - sz, x))
                                              ^
cc1: all warnings being treated as errors

Fixes: 7649194a ("dm integrity: remove sector type casts")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull devicetree updates from Rob Herring:

 - Unit test for overlays with GPIO hogs

 - Improve dma-ranges parsing to handle dma-ranges with multiple entries

 - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9

 - Improve overlay error reporting

 - Device link support for power-domains and hwlocks bindings

 - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
   PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
   ITE Tech

 - Add deprecated Marvell vendor prefix 'mrvl'

 - A bunch of binding conversions to DT schema continues. Of note, the
   common serial and USB connector bindings are converted.

 - Add more Arm CPU compatibles

 - Drop Mark Rutland as DT maintainer :(

* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
  MAINTAINERS: drop an old reference to stm32 pwm timers doc
  MAINTAINERS: dt: update etnaviv file reference
  dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
  dt-bindings: uniphier-system-bus: fix warning in the example
  dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
  dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
  dt-bindings: power: Fix example for power-domain
  dt-bindings: arm: Add some constraints for PSCI nodes
  of: some unittest overlays not untracked
  of: gpio unittest kfree() wrong object
  dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
  dt-bindings: serial: sh-sci: Convert to json-schema
  dt-bindings: serial: Document serialN aliases
  dt-bindings: thermal: tsens: Set 'additionalProperties: false'
  dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
  dt-bindings: vendor-prefixes: Add Beacon vendor prefix
  dt-bindings: vendor-prefixes: Add Topwise
  of: of_private.h: Replace zero-length array with flexible-array member
  docs: dt: fix a broken reference to input.yaml
  docs: dt: fix references to ap806-system-controller.txt
  ...

Pull SCSI updates from James Bottomley:
 "This series has a huge amount of churn because it pulls in Mauro's doc
  update changing all our txt files to rst ones.

  Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
  zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
  some other minor updates.

  The major core change is Hannes moving functions out of the aacraid
  driver and into the core"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
  scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
  scsi: ufs: Do not rely on prefetched data
  scsi: dc395x: remove dc395x_bios_param
  scsi: libiscsi: Fix error count for active session
  scsi: hpsa: correct race condition in offload enabled
  scsi: message: fusion: Replace zero-length array with flexible-array member
  scsi: qedi: Add PCI shutdown handler support
  scsi: qedi: Add MFW error recovery process
  scsi: ufs: Enable block layer runtime PM for well-known logical units
  scsi: ufs-qcom: Override devfreq parameters
  scsi: ufshcd: Let vendor override devfreq parameters
  scsi: ufshcd: Update the set frequency to devfreq
  scsi: ufs: Resume ufs host before accessing ufs device
  scsi: ufs-mediatek: customize the delay for enabling host
  scsi: ufs: make HCE polling more compact to improve initialization latency
  scsi: ufs: allow custom delay prior to host enabling
  scsi: ufs-mediatek: use common delay function
  scsi: ufs: introduce common and flexible delay function
  scsi: ufs: use an enum for host capabilities
  scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
  ...

Pull MTD updates from Miquel Raynal:
 "MTD core changes:
   - Fix issue where write_cached_data() fails but write() still returns
     success

   - maps: sa1100-flash: Replace zero-length array with flexible-array
     member

   - phram: Fix a double free issue in error path

   - Convert fallthrough comments into statements

   - MAINTAINERS: Add the IRC channel to the MTD related subsystems

  Raw NAND core changes:
   - Add support for manufacturer specific suspend/resume operation

   - Add support for manufacturer specific lock/unlock operation

   - Replace zero-length array with flexible-array member

   - Fix a typo ("manufecturer")

   - Ensure nand_soft_waitrdy wait period is enough

  Raw NAND controller driver changes:
   - Brcmnand:
       * Add support for flash-edu for dma transfers (+ bindings)

   - Cadence:
       * Reinit completion before executing a new command
       * Change bad block marker size
       * Fix the calculation of the avaialble OOB size
       * Get meta data size from registers

   - Qualcom:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release resources on failure within qcom_nandc_alloc()

   - Allwinner:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Marvell:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release DMA channel on error

   - Freescale:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Macronix:
       * Add support for Macronix NAND randomizer (+ bindings)

   - Ams-delta:
       * Rename structures and functions to gpio_nand*
       * Make the driver custom I/O ready
       * Drop useless local variable
       * Support custom driver initialisation
       * Add module device tables
       * Handle more GPIO pins as optional
       * Make read pulses optional
       * Don't hardcode read/write pulse widths
       * Push inversion handling to gpiolib
       * Enable OF partition info support
       * Drop board specific partition info
       * Use struct gpio_nand_platdata
       * Write protect device during probe

   - Ingenic:
       * Use devm_platform_ioremap_resource()
       * Add dependency on MIPS || COMPILE_TEST

   - Denali:
       * Deassert write protect pin

   - ST:
       * Use dma_request_chan() instead dma_request_slave_channel()

  Raw NAND chip driver changes:
   - Toshiba:
       * Support reading the number of bitflips for BENAND (Built-in ECC NAND)

   - Macronix:
       * Add support for deep power down mode
       * Add support for block protection

  SPI-NAND core changes:
   - Do not erase the block before writing a bad block marker

   - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB

   - Stop using spinand->oobbuf for buffering bad block markers

   - Rework detect procedure for different READ_ID operation

  SPI-NAND driver changes:
   - Toshiba:
       * Support for new Kioxia Serial NAND
       * Rename function name to change suffix and prefix (8Gbit)
       * Add comment about Kioxia ID

   - Micron:
       * Add new Micron SPI NAND devices with multiple dies
       * Add M70A series Micron SPI NAND devices
       * identify SPI NAND device with Continuous Read mode
       * Add new Micron SPI NAND devices
       * Describe the SPI NAND device MT29F2G01ABAGD
       * Generalize the OOB layout structure and function names

  SPI NOR core changes:
   - Move all the manufacturer specific quirks/code out of the core, to
     make the core logic more readable and thus ease maintenance.

   - Move the SFDP logic out of the core, it provides a better
     separation between the SFDP parsing and core logic.

   - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers
     must not be able to use structures that are meant just for the SPI
     NOR core.

   - Use the spi-mem direct mapping API to let advanced controllers
     optimize the read/write operations when they support direct
     mapping.

   - Add generic formula for the Status Register block protection
     handling. It fixes some long standing locking limitations and eases
     the addition of the 4bit block protection support.

   - Add block protection support for flashes with 4 block protection
     bits in the Status Register.

  SPI NOR controller drivers changes:
   - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor
     driver.

   - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts.

  HyperBus changes:
   - Print error msg when compatible is wrong or missing

   - Move mapping of direct access window from core to individual
     drivers"

* tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits)
  mtd: Convert fallthrough comments into statements
  mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND)
  MAINTAINERS: Add the IRC channel to the MTD related subsystems
  mtd: Fix issue where write_cached_data() fails but write() still returns success
  mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member
  mtd: phram: fix a double free issue in error path
  mtd: spinand: toshiba: Support for new Kioxia Serial NAND
  mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)
  mtd: rawnand: macronix: Add support for deep power down mode
  mtd: rawnand: Add support for manufacturer specific suspend/resume operation
  mtd: spi-nor: Enable locking for n25q512ax3/n25q512a
  mtd: spi-nor: Add SR 4bit block protection support
  mtd: spi-nor: Add generic formula for SR block protection handling
  mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size
  mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member
  mtd: spi-nor: Clear WEL bit when erase or program errors occur
  MAINTAINERS: update entry after SPI NOR controller move
  mtd: spi-nor: Trim what is exposed in spi-nor.h
  mtd: spi-nor: Drop the MFR definitions
  mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table
  ...

Pull dmaengine updates from Vinod Koul:
 "Core:
   - Some code cleanup and optimization in core by Andy

   - Debugfs support for displaying dmaengine channels by Peter

  Drivers:
   - New driver for uniphier-xdmac controller

   - Updates to stm32 dma, mdma and dmamux drivers and PM support

   - More updates to idxd drivers

   - Bunch of changes in tegra-apb driver and cleaning up of pm
     functions

   - Bunch of spelling fixes and Replace zero-length array patches

   - Shutdown hook for fsl-dpaa2-qdma driver

   - Support for interleaved transfers for ti-edma and virtualization
     support for k3-dma driver

   - Support for reset and updates in xilinx_dma driver

   - Improvements and locking updates in at_hdma driver"

* tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
  dt-bindings: dma: renesas,usb-dmac: add r8a77961 support
  dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq
  dmaengine: tegra-apb: Improve DMA synchronization
  dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler
  dmaengine: tegra-apb: mark PM functions as __maybe_unused
  dmaengine: fix spelling mistake "exceds" -> "exceeds"
  dmaengine: sprd: Set request pending flag when DMA controller is active
  dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow
  dmaengine: idxd: remove global token limit check
  dmaengine: idxd: reflect shadow copy of traffic class programming
  dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc
  dmaengine: Create debug directories for DMA devices
  dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
  dmaengine: Add basic debugfs support
  dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma'
  dmaengine: ti: edma: fix null dereference because of a typo in pointer name
  dmaengine: fsl-dpaa2-qdma: Adding shutdown hook
  dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver
  dt-bindings: dmaengine: Add UniPhier external DMA controller bindings
  dmaengine: ti: k3-udma: Implement support for atype (for virtualization)
  ...

Pull i2c updates from Wolfram Sang:
 "I2C has:

   - using defines for bus speeds to avoid mistakes in hardcoded values;
     lots of small driver updates because of that. Thanks, Andy!

   - API change: i2c_setup_smbus_alert() was renamed to
     i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree
     users have been converted

   - in the core, a rare race condition when deleting the cdev has been
     fixed. Thanks, Kevin!

   - lots of driver updates. Thanks, everyone!

  I also want to mention: The amount of review and testing tags given
  was quite high this time. Thank you to these people, too. I hope we
  can keep it like this!"

* 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
  i2c: rcar: clean up after refactoring i2c_timings
  macintosh: convert to i2c_new_scanned_device
  i2c: drivers: Use generic definitions for bus frequencies
  i2c: algo: Use generic definitions for bus frequencies
  i2c: stm32f7: switch to I²C generic property parsing
  i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
  i2c: core: Allow override timing properties with 0
  i2c: core: Provide generic definitions for bus frequencies
  i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()
  i2c: imx: remove duplicate print after platform_get_irq()
  i2c: designware: Fix spelling typos in the comments
  i2c: designware: Discard i2c_dw_read_comp_param() function
  i2c: designware: Detect the FIFO size in the common code
  i2c: dev: Fix the race between the release of i2c_dev and cdev
  i2c: qcom-geni: Drop of_platform.h include
  i2c: qcom-geni: Grow a dev pointer to simplify code
  i2c: qcom-geni: Let firmware specify irq trigger flags
  i2c: stm32f7: do not backup read-only PECR register
  i2c: smbus: remove outdated references to irq level triggers
  i2c: convert SMBus alert setup function to return an ERRPTR
  ...

Pull sound updates from Takashi Iwai:
 "This became again a busy development cycle.  There are few ALSA core
  updates (merely API cleanups and sparse fixes), with the majority of
  other changes are found in ASoC scene.

  Here are some highlights:

  ALSA core:
   - More helper macros for sparse warning fixes (e.g. bitwise types)
   - Slight optimization of PCM OSS locks
   - Make common handling for PCM / compress buffers (for SOF)

  ASoC:
   - Lots of code refactoring and modernization for (still ongoing)
     componentization works
   - Conversion of SND_SOC_ALL_CODECS to use imply
   - Continued refactoring and fixing of the Intel SOF/SST support,
     including the initial (but still incomplete) SoundWire support
   - SoundWire and more advanced clocking support for Realtek RT5682
   - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
     DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
     and TLV320ADCX140

  HD-audio:
   - Optimizations in HDMI jack handling
   - A few new quirks and fixups for Realtek codecs

  USB-audio:
   - Delayed registration support
   - New quirks for Motu, Kingston, Presonus"

* tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
  ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor
  Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h"
  ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups
  ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
  ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
  ALSA: hda/realtek - a fake key event is triggered by running shutup
  ALSA: hda: default enable CA0132 DSP support
  ASoC: amd: acp3x-pcm-dma: clean up two indentation issues
  ASoC: tlv320adcx140: Remove undocumented property
  ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function
  ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
  ASoC: Intel: boards: add sof_sdw machine driver
  ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms
  ASoC: rt5682: move DAI clock registry to I2S mode
  ASoC: pxa: magician: convert to use i2c_new_client_device()
  ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities
  Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
  ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
  ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks
  ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers
  ...

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.7 kernel cycle.

  There are no core changes this time, only driver developments:

   - New driver for the Dialog Semiconductor DA9062 Power Management
     Integrated Circuit (PMIC).

   - Renesas SH-PFC has improved consistency, with group and register
     checks in the configuration checker.

   - New subdriver for the Qualcomm IPQ6018.

   - Add the RGMII pin control functionality to Qualcomm IPQ8064.

   - Performance and code quality cleanups in the Mediatek driver.

   - Improve the Broadcom BCM2835 support to cover all the GPIOs that
     exist in it.

   - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on
     suspend.

   - Add some missing groups and functions to the Ingenic driver.

   - Convert some of the Freescale device tree bindings to use the new
     and all improved JSON YAML markup.

   - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC
     driver.

   - Support high impedance mode in the Spreadtrum/Unisoc driver"

* tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits)
  pinctrl: qcom: fix compilation error
  pinctrl: qcom: use scm_call to route GPIO irq to Apps
  pinctrl: sprd: Add pin high impedance mode support
  pinctrl: sprd: Use the correct pin output configuration
  pinctrl: tegra: Add SFIO/GPIO programming on Tegra194
  pinctrl: tegra: Renumber the GG.0 and GG.1 pins
  pinctrl: tegra: Do not add default pin range on Tegra194
  pinctrl: tegra: Pass struct tegra_pmx for pin range check
  pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo
  pinctrl: tegra: Fix whitespace issues for improved readability
  pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow
  pinctrl: freescale: drop the dependency on ARM64 for i.MX8M
  Revert "pinctrl: mvebu: armada-37xx: use use platform api"
  dt-bindings: pinctrl: at91: Fix a typo ("descibe")
  pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm
  pinctrl: sprd: Fix the kconfig warning
  pinctrl: ingenic: add hdmi-ddc pin control group
  pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member
  pinctrl: sprd: Allow the SPRD pinctrl driver building into a module
  pinctrl: Export some needed symbols at module load time
  ...

Pull hwspinlock updates from Bjorn Andersson:
 "This marks all hwspinlock driver COMPILE_TESTable and replaces the
  zero-length array in hwspinlock_device with a flexible-array member"

* tag 'hwlock-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  hwspinlock: hwspinlock_internal.h: Replace zero-length array with flexible-array member
  hwspinlock: Allow drivers to be built with COMPILE_TEST

Pull remoteproc updates from Bjorn Andersson:

 - a range of improvements to the OMAP remoeteproc driver; among other
   things adding devicetree, suspend/resume and watchdog support, and
   adds support the remoteprocs in the DRA7xx SoC

 - support for 64-bit firmware, extends the ELF loader to support this
   and fixes for a number of race conditions in the recovery handling

 - a generic mechanism to allow remoteproc drivers to sync state with
   remote processors during a panic, and uses this to prepare Qualcomm
   remote processors for post mortem analysis

 - fixes to cleanly recover from crashes in the modem firmware on
   production Qualcomm devices

* tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (37 commits)
  remoteproc/omap: Switch to SPDX license identifiers
  remoteproc/omap: Add watchdog functionality for remote processors
  remoteproc/omap: Report device exceptions and trigger recovery
  remoteproc/omap: Add support for runtime auto-suspend/resume
  remoteproc/omap: Add support for system suspend/resume
  remoteproc/omap: Request a timer(s) for remoteproc usage
  remoteproc/omap: Check for undefined mailbox messages
  remoteproc/omap: Remove the platform_data header
  remoteproc/omap: Add support for DRA7xx remote processors
  remoteproc/omap: Initialize and assign reserved memory node
  remoteproc/omap: Add the rproc ops .da_to_va() implementation
  remoteproc/omap: Add support to parse internal memories from DT
  remoteproc/omap: Add a sanity check for DSP boot address alignment
  remoteproc/omap: Add device tree support
  dt-bindings: remoteproc: Add OMAP remoteproc bindings
  remoteproc: qcom: Introduce panic handler for PAS and ADSP
  remoteproc: qcom: q6v5: Add common panic handler
  remoteproc: Introduce "panic" callback in ops
  remoteproc: Traverse rproc_list under RCU read lock
  remoteproc: Fix NULL pointer dereference in rproc_virtio_notify
  ...

Pull percpu updates from Dennis Zhou:
 "This is just a few documentation fixes for percpu refcount and bitmap
  helpers that went in v5.6, and moving my emails to all be at korg"

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: update copyright emails to dennis@kernel.org
  include/bitmap.h: add new functions to documentation
  include/bitmap.h: add missing parameter in docs
  percpu_ref: Fix comment regarding percpu_ref_init flags

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - GICv4.1 support

   - 32bit host removal

  PPC:
   - secure (encrypted) using under the Protected Execution Framework
     ultravisor

  s390:
   - allow disabling GISA (hardware interrupt injection) and protected
     VMs/ultravisor support.

  x86:
   - New dirty bitmap flag that sets all bits in the bitmap when dirty
     page logging is enabled; this is faster because it doesn't require
     bulk modification of the page tables.

   - Initial work on making nested SVM event injection more similar to
     VMX, and less buggy.

   - Various cleanups to MMU code (though the big ones and related
     optimizations were delayed to 5.8). Instead of using cr3 in
     function names which occasionally means eptp, KVM too has
     standardized on "pgd".

   - A large refactoring of CPUID features, which now use an array that
     parallels the core x86_features.

   - Some removal of pointer chasing from kvm_x86_ops, which will also
     be switched to static calls as soon as they are available.

   - New Tigerlake CPUID features.

   - More bugfixes, optimizations and cleanups.

  Generic:
   - selftests: cleanups, new MMU notifier stress test, steal-time test

   - CSV output for kvm_stat"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
  x86/kvm: fix a missing-prototypes "vmread_error"
  KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
  KVM: VMX: Add a trampoline to fix VMREAD error handling
  KVM: SVM: Annotate svm_x86_ops as __initdata
  KVM: VMX: Annotate vmx_x86_ops as __initdata
  KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
  KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
  KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
  KVM: VMX: Configure runtime hooks using vmx_x86_ops
  KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
  KVM: x86: Move init-only kvm_x86_ops to separate struct
  KVM: Pass kvm_init()'s opaque param to additional arch funcs
  s390/gmap: return proper error code on ksm unsharing
  KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
  KVM: Fix out of range accesses to memslots
  KVM: X86: Micro-optimize IPI fastpath delay
  KVM: X86: Delay read msr data iff writes ICR MSR
  KVM: PPC: Book3S HV: Add a capability for enabling secure guests
  KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
  KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
  ...

Pull x86 fix from Ingo Molnar:
 "A single fix addressing Sparse warnings. <asm/bitops.h> is changed
  non-trivially to avoid the warnings, but generated code is not
  supposed to be affected"

* tag 'x86-urgent-2020-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix bitops.h warning with a moved cast

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
 "Just a couple of updates for linux-5.7:

   - A new Kconfig option to enable IMA architecture specific runtime
     policy rules needed for secure and/or trusted boot, as requested.

   - Some message cleanup (eg. pr_fmt, additional error messages)"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: add a new CONFIG for loading arch-specific policies
  integrity: Remove duplicate pr_fmt definitions
  IMA: Add log statements for failure conditions
  IMA: Update KBUILD_MODNAME for IMA files to ima

Merge updates from Andrew Morton:
 "A large amount of MM, plenty more to come.

  Subsystems affected by this patch series:
   - tools
   - kthread
   - kbuild
   - scripts
   - ocfs2
   - vfs
   - mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap,
         sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy,
         hugetlbfs, hugetlb"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
  include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP
  mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS
  selftests/vm: fix map_hugetlb length used for testing read and write
  mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge()
  mm/hugetlb.c: clean code by removing unnecessary initialization
  hugetlb_cgroup: add hugetlb_cgroup reservation docs
  hugetlb_cgroup: add hugetlb_cgroup reservation tests
  hugetlb: support file_region coalescing again
  hugetlb_cgroup: support noreserve mappings
  hugetlb_cgroup: add accounting for shared mappings
  hugetlb: disable region_add file_region coalescing
  hugetlb_cgroup: add reservation accounting for private mappings
  mm/hugetlb_cgroup: fix hugetlb_cgroup migration
  hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations
  hugetlb_cgroup: add hugetlb_cgroup reservation counter
  hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race
  hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
  mm/memblock.c: remove redundant assignment to variable max_addr
  mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
  mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk()
  ...