- 15 Aug, 2023 9 commits
-
-
Zhang Yi authored
no_recovery is redundant, just drop it. Signed-off-by:
Zhang Yi <yi.zhang@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230811063610.2980059-10-yi.zhang@huaweicloud.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Zhang Yi authored
Adjust the initialization sequence and error handle of journal_t, moving load superblock to the begin, and classify others initialization. Signed-off-by:
-
Zhang Yi authored
If JBD2_FEATURE_INCOMPAT_FAST_COMMIT bit is set, it means the journal have fast commit records need to recover, so the fast commit size should not be too large, and the leftover normal journal size should never less than JBD2_MIN_JOURNAL_BLOCKS. If it happens, the journal->j_last is likely to be wrong and will probably lead to incorrect journal recovery. So add a check into the journal_check_superblock(), and drop the pointless check when initializing the fastcommit parameters. Signed-off-by:
-
Zhang Yi authored
Rename load_superblock() to journal_load_superblock(), move getting and reading superblock from journal_init_common() and journal_get_superblock() to this function, and also rename journal_get_superblock() to journal_check_superblock(), make it a pure check helper to check superblock validity from disk. Signed-off-by:
-
Zhang Yi authored
jbd2_verify_csum_type() helper check checksum type in the superblock for v2 or v3 checksum feature, it always return true if these features are not enabled, and it has only one user, so open code it is more clear. Signed-off-by:
-
Zhang Yi authored
journal_get_superblock() is used to check validity of the jounal supberblock, so move the features checks from jbd2_journal_load() to journal_get_superblock(). Signed-off-by:
-
Zhang Yi authored
Since load_superblock() has been moved to journal_init_common(), the in-memory superblock structure is initialized and contains valid data once the file system has a journal_t object, so it's safe to access it, let's drop the call to journal_get_superblock() from jbd2_journal_check_used_features() and also drop the setting/clearing of the veirfy bit of the superblock buffer. Signed-off-by:
-
Zhang Yi authored
Move the call to load_superblock() from jbd2_journal_load() and jbd2_journal_wipe() early into journal_init_common(), the journal superblock gets read and the in-memory journal_t structure gets initialised after calling jbd2_journal_init_{dev,inode}, it's safe to do following initialization according to it. Signed-off-by: -
Zhang Yi authored
Move load_superblock() declaration and the functions it calls before journal_init_common(). This is a preparation for moving a call to load_superblock() from jbd2_journal_load() and jbd2_journal_wipe() to journal_init_common(). No functional changes. Signed-off-by:
-
- 05 Aug, 2023 3 commits
-
-
Ritesh Harjani authored
Using CR_BEST_AVAIL_LEN only make sense for regular files, as for non-regular files we never normalize the allocation request length i.e. goal len is same as original length (ac_g_ex.fe_len == ac_o_ex.fe_len). Hence there is no scope of trimming the goal length to make it satisfy original request len. Thus this patch avoids using CR_BEST_AVAIL_LEN criteria for non-regular files request. Cc: stable@kernel.org Fixes: 33122aa930f1 ("ext4: Add allocation criteria 1.5 (CR1_5)") Reported-by:Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Ritesh Harjani (IBM) <ritesh.list@gmail.com> Tested-by:
-
Wang Jianjian authored
Since commit f7f497cb ("jbd2: kill t_handle_lock transaction spinlock"), this lock has been no use. Fixes: f7f497cb ("jbd2: kill t_handle_lock transaction spinlock") Signed-off-by:
Wang Jianjian <wangjianjian0@foxmail.com> Reviewed-by:
-
Luís Henriques authored
If the filename casefolding fails, we'll be leaking memory from the fscrypt_name struct, namely from the 'crypto_buf.name' member. Make sure we free it in the error path on both ext4_fname_setup_filename() and ext4_fname_prepare_lookup() functions. Cc: stable@kernel.org Fixes: 1ae98e29 ("ext4: optimize match for casefolded encrypted dirs") Signed-off-by:
Luís Henriques <lhenriques@suse.de> Reviewed-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230803091713.13239-1-lhenriques@suse.deSigned-off-by:
-
- 04 Aug, 2023 3 commits
-
-
Yang Li authored
The code calling function '__cp_buffer_busy' has been removed, so the function should also be removed. silence the warning: fs/jbd2/checkpoint.c:48:20: warning: unused function '__cp_buffer_busy' Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5518Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Zhihao Cheng authored
Following process will corrupt ext4 image: Step 1: jbd2_journal_commit_transaction __jbd2_journal_insert_checkpoint(jh, commit_transaction) // Put jh into trans1->t_checkpoint_list journal->j_checkpoint_transactions = commit_transaction // Put trans1 into journal->j_checkpoint_transactions Step 2: do_get_write_access test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty __jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2 Step 3: drop_cache journal_shrink_one_cp_list jbd2_journal_try_remove_checkpoint if (!trylock_buffer(bh)) // lock bh, true if (buffer_dirty(bh)) // buffer is not dirty __jbd2_journal_remove_checkpoint(jh) // remove jh from trans1->t_checkpoint_list Step 4: jbd2_log_do_checkpoint trans1 = journal->j_checkpoint_transactions // jh is not in trans1->t_checkpoint_list jbd2_cleanup_journal_tail(journal) // trans1 is done Step 5: Power cut, trans2 is not committed, jh is lost in next mounting. Fix it by checking 'jh->b_transaction' before remove it from checkpoint. Cc: stable@kernel.org Fixes: 46f881b5 ("jbd2: fix a race when checking checkpoint buffer busy") Signed-off-by:
Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by:
-
Zhang Yi authored
journal_clean_one_cp_list() has been merged into journal_shrink_one_cp_list(), but do chekpoint buffer cleanup from the committing process is just a best effort, it should stop scan once it meet a busy buffer, or else it will cause a lot of invalid buffer scan and checks. We catch a performance regression when doing fs_mark tests below. Test cmd: ./fs_mark -d scratch -s 1024 -n 10000 -t 1 -D 100 -N 100 Before merging checkpoint buffer cleanup: FSUse% Count Size Files/sec App Overhead 95 10000 1024 8304.9 49033 After merging checkpoint buffer cleanup: FSUse% Count Size Files/sec App Overhead 95 10000 1024 7649.0 50012 FSUse% Count Size Files/sec App Overhead 95 10000 1024 2107.1 50871 After merging checkpoint buffer cleanup, the total loop count in journal_shrink_one_cp_list() could be up to 6,261,600+ (50,000+ ~ 100,000+ in general), most of them are invalid. This patch fix it through passing 'shrink_type' into journal_shrink_one_cp_list() and add a new 'SHRINK_BUSY_STOP' to indicate it should stop once meet a busy buffer. After fix, the loop count descending back to 10,000+. After this fix: FSUse% Count Size Files/sec App Overhead 95 10000 1024 8558.4 49109 Cc: stable@kernel.org Fixes: b98dba27 ("jbd2: remove journal_clean_one_cp_list()") Signed-off-by:
-
- 03 Aug, 2023 11 commits
-
-
Kemeng Shi authored
We named criteria with CR_XXX, correct stale comment to criteria with raw number. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
-
Kemeng Shi authored
Return good group when it's found in loop to remove futher check if good group is found after loop. Signed-off-by:
-
Kemeng Shi authored
Return good group when it's found in loop to remove futher check if good group is found after loop. Signed-off-by:
-
Kemeng Shi authored
Remove ext4_set_bit_atomic and ext4_clear_bit_atomic which are defined but not used. Signed-off-by:
-
Kemeng Shi authored
Replace the traditional ternary conditional operator with with max()/min() Signed-off-by:
-
Kemeng Shi authored
The return at end of void function is unnecessary, just remove it. Signed-off-by:
-
Kemeng Shi authored
Use intuitive is_power_of_2 helper in ext4_mb_regular_allocator. Signed-off-by:
-
Kemeng Shi authored
Return good group when it's found in loop to remove unnecessary NULL initialization of grp and futher check if good group is found after loop. Signed-off-by:
-
Kemeng Shi authored
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it in int. If ngroups is bigger than max number described by int, it will be treat as a negative number. Then "return group + 1 >= ngroups ? 0 : group + 1;" may keep returning 0. Switch int to ext4_group_t in next_linear_group to fix the overflow. Fixes: 196e402a ("ext4: improve cr 0 / cr 1 group scanning") Signed-off-by:
-
Kemeng Shi authored
Group corruption check will access memory of grp and will trigger kernel crash if grp is NULL. So do NULL check before corruption check. Fixes: 5354b2af ("ext4: allow ext4_get_group_info() to fail") Signed-off-by:
-
Ojaswin Mujoo authored
Replace CR_FAST with ext4_mb_cr_expensive() inline function for better readability. This function returns true if the criteria is one of the expensive/slower ones where lots of disk IO/prefetching is acceptable. No functional changes are intended in this patch. Signed-off-by:
Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by:
-
- 29 Jul, 2023 14 commits
-
-
Jan Kara authored
The multi-mount protection kthread checks for read-only filesystem and aborts in that case. The remount code actually handles stopping of the kthread on remount so the only purpose of the check is in case of emergency remount read-only. Replace the check for read-only filesystem with a check for shutdown filesystem as running MMP on such is risky anyway and it makes ordering of things during remount simpler. Signed-off-by:
-
Jan Kara authored
JBD2 code will quickly return without doing anything when there's nothing to commit so there's no point in the read-only check in ext4_force_commit(). Just drop it. Signed-off-by:
-
Jan Kara authored
We should not have dirty inodes on read-only filesystem. Also silently bailing without writing anything would be a problem when we enable quotas during remount while the filesystem is read-only. So drop the read-only check. Signed-off-by:
-
Jan Kara authored
We better should not be initializing inode tables on read-only filesystem. The following transaction start will warn us and make the function bail anyway so drop the pointless check. Signed-off-by:
-
Jan Kara authored
Now that filesystem abort marks the filesystem as shutdown, we shouldn't be ever hitting the sb_rdonly() check in ext4_journal_check_start(). Since this is a suitable place for catching all sorts of programming errors, convert the check to WARN_ON instead of dropping it. Signed-off-by:
-
Jan Kara authored
When the filesystem gets first remounted read-only and then unmounted, ext4_quota_off() will try to start a transaction (and fail) on read-only filesystem to cleanup inode flags for legacy quota files. Just bail before trying to start a transaction instead since that is going to issue a warning. Signed-off-by:
-
Jan Kara authored
EXT4_MF_FS_ABORTED flag has practically the same intent as EXT4_FLAGS_SHUTDOWN flag. The shutdown flag is checked in many more places than the aborted flag which is mostly the historical artifact where we were relying on SB_RDONLY checks instead of the aborted flag checks. There are only three places - ext4_sync_file(), __ext4_remount(), and mballoc debug code - which check aborted flag and not shutdown flag and this is arguably a bug. Avoid these inconsistencies by removing EXT4_MF_FS_ABORTED flag and using EXT4_FLAGS_SHUTDOWN everywhere. Signed-off-by:
-
Jan Kara authored
'abort' mount option is the only mount option that has special handling and sets a bit in sbi->s_mount_flags. There is not strong reason for that so just simplify the code and make 'abort' set a bit in sbi->s_mount_opt2 as any other mount option. This simplifies the code and will allow us to drop EXT4_MF_FS_ABORTED completely in the following patch. Signed-off-by:
-
Jan Kara authored
Currently ext4_forced_shutdown() takes struct ext4_sb_info but most callers need to get it from struct super_block anyway. So just pass in struct super_block to save all callers from some boilerplate code. No functional changes. Signed-off-by:
-
Jan Kara authored
sb_rdonly() helper instead of directly checking sb->s_flags. Signed-off-by:
-
Jan Kara authored
ext4_freeze() and ext4_unfreeze() checks for sb_rdonly(). However this check is pointless as VFS already checks for read-only filesystem before calling filesystem specific methods. Remove the pointless checks. Signed-off-by:
-
Guoqing Cai authored
In jbd2_journal_load(), when journal_reset fails, it prints an incorrect warn log. Fix this by changing the goto statement to return statement. Also, return actual error code from jbd2_journal_recover() and journal_reset(). Signed-off-by:
Guoqing Cai <u202112087@hust.edu.cn> Reviewed-by:
-
Baokun Li authored
Let's say we want to allocate 2 blocks starting from 4294966386, after predicting the file size, start is aligned to 4294965248, len is changed to 2048, then end = start + size = 0x100000000. Since end is of type ext4_lblk_t, i.e. uint, end is truncated to 0. This causes (pa->pa_lstart >= end) to always hold when checking if the current extent to be allocated crosses already preallocated blocks, so the resulting ac_g_ex may cross already preallocated blocks. Hence we convert the end type to loff_t and use pa_logical_end() to avoid overflow. Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
-
Baokun Li authored
When we calculate the end position of ext4_free_extent, this position may be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not the first case of adjusting the best extent, that is, new_bex_end > 0, the following BUG_ON will be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:5116! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279 RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430 Call Trace: <TASK> ext4_mb_use_best_found+0x203/0x2f0 ext4_mb_try_best_found+0x163/0x240 ext4_mb_regular_allocator+0x158/0x1550 ext4_mb_new_blocks+0x86a/0xe10 ext4_ext_map_blocks+0xb0c/0x13a0 ext4_map_blocks+0x2cd/0x8f0 ext4_iomap_begin+0x27b/0x400 iomap_iter+0x222/0x3d0 __iomap_dio_rw+0x243/0xcb0 iomap_dio_rw+0x16/0x80 ========================================================= A simple reproducer demonstrating the problem: mkfs.ext4 -F /dev/sda -b 4096 100M mount /dev/sda /tmp/test fallocate -l1M /tmp/test/tmp fallocate -l10M /tmp/test/file fallocate -i -o 1M -l16777203M /tmp/test/file fsstress -d /tmp/test -l 0 -n 100000 -p 8 & sleep 10 && killall -9 fsstress rm -f /tmp/test/tmp xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192" We simply refactor the logic for adjusting the best extent by adding a temporary ext4_free_extent ex and use extent_logical_end() to avoid overflow, which also simplifies the code. Cc: stable@kernel.org # 6.4 Fixes: 93cdf49f ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by:
-
