- 09 Feb, 2022 9 commits
-
-
zhanglianjie authored
After the buffer object is successfully mapped, call amdgpu_bo_kunmap before the function returns. Signed-off-by:
zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
zhanglianjie authored
After the buffer object is successfully mapped, call radeon_bo_kunmap before the function returns. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Mukul Joshi authored
A few MQD manager functions are duplicated for all versions of MQD manager. Remove this duplication by moving the common functions into kfd_mqd_manager.c file. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Mukul Joshi authored
Cleanup the kfd code by removing the unused old debugger implementation. The address watch was only ever implemented in the upstream driver for GFXv7 (Kaveri). The user mode tools runtime using this API was never open-sourced. Work on the old debugger prototype that used this API has been discontinued years ago. Only a small piece of resetting wavefronts is kept and is moved to kfd_device_queue_manager.c. Signed-off-by:
-
Mukul Joshi authored
With no HWS, TLB flushing will not work in SVM code. Fix this by calling kfd_flush_tlb() which works for both HWS and no HWS case. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Yang Wang authored
it will cause hwmon node of power1_label is not created. v2: the hwmon node of "power1_label" is always needed for all ASICs. and the patch will remove ASIC type check for "power1_label". Fixes: ae07970a ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh") Signed-off-by:
Yang Wang <KevinYang.Wang@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Yang Wang authored
PPT limit cannot be queried from VF Fixes: f3527a64 ("drm/amd/pm: Enable sysfs required by rocm-smi tool for One VF mode") Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
-
Tao Zhou authored
Replace reset queue for specific PASID with unmap all queues, reset queue could break CP scheduler. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
-
Tao Zhou authored
As the function is used in more different cases, use a more general name. Signed-off-by:
-
- 07 Feb, 2022 31 commits
-
-
Alex Deucher authored
To align with other headers. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Alex Deucher authored
To align with other headers. Reviewed-by:
-
Alex Deucher authored
MIT. Reviewed-by:
-
Alex Deucher authored
Fixes hangs on driver load with multiple displays on DCN 2.0 parts. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215511 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1877 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1886 Fixes: ee2698cf ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split") Reviewed-by:
-
Alex Deucher authored
These have been at production level for a while. Drop the flag. Reviewed-by:
-
Maíra Canal authored
Include the header with the prototype to silence the following clang warnings: drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:29:6: warning: no previous prototype for function 'amdgpu_dpm_get_active_displays' [-Wmissing-prototypes] void amdgpu_dpm_get_active_displays(struct amdgpu_device *adev) ^ drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:29:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void amdgpu_dpm_get_active_displays(struct amdgpu_device *adev) ^ static drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:76:5: warning: no previous prototype for function 'amdgpu_dpm_get_vrefresh' [-Wmissing-prototypes] u32 amdgpu_dpm_get_vrefresh(struct amdgpu_device *adev) ^ drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:76:1: note: declare 'static' if the function is not intended to be used outside of this translation unit u32 amdgpu_dpm_get_vrefresh(struct amdgpu_device *adev) ^ static 2 warnings generated. Besides that, remove the duplicated prototype of the function amdgpu_dpm_get_vblank_time in order to keep the consistency of the headers. Fixes: 6ddbd37f ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations") Reviewed-by:Evan Quan <evan.quan@amd.com> Signed-off-by:
Maíra Canal <maira.canal@usp.br> Signed-off-by:
-
Tom Rix authored
clang static analysis reports this error amdgpu_smu.c:2289:9: warning: Called function pointer is null (null dereference) return smu->ppt_funcs->emit_clk_levels( ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There is a logic error in the earlier check of emit_clk_levels. The error value is set to the ret variable but ret is never used. Return directly and remove the unneeded ret variable. Fixes: 5d64f9bb ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset") Reviewed-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Christian König authored
We want to have lockdep annotation here, so make sure that we reserve the PD while removing PRTs even if it isn't strictly necessary since the VM object is about to be destroyed anyway. Signed-off-by:
-
Christian König authored
Since newly added BOs don't have any mappings it's ok to add them without holding the VM lock. Only when we add per VM BOs the lock is mandatory. Signed-off-by:
Bhardwaj, Rajneesh <Rajneesh.Bhardwaj@amd.com> Acked-by:
-
Martin Tsai authored
[Why] The link encoder mapping could return a null one and causes system crash. [How] Let the mapping can get an available link encoder without endpoint identification check. Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by:
Martin Tsai <martin.tsai@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Aric Cyr authored
This version brings along the following fixes: -fix for build failure uninitalized error -Bug fix for DP2 using uncertified cable -limit unbounded request to 5k -fix DP LT sequence on EQ fail -Bug fixes for S3/S4 Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Anthony Koo authored
Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Ilya authored
[Why] The number of lanes wasn't being reset to maximum when reducing link rate due to an EQ failure. This could result in having fewer lanes in the verified link capabilities, a lower maximum link bandwidth, and fewer modes being supported. [How] Reset the number of lanes to max when dropping link rate due to EQ failure during link training. Reviewed-by:
Ilya <Ilya.Bakoulin@amd.com> Tested-by:
-
Zhan Liu authored
[Why] Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will be cleared to 0 at S3 resume. [How] Keep eDP Vdd on when eDP stream is already enabled. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Zhan Liu <Zhan.Liu@amd.com> Tested-by:
-
Paul Hsieh authored
[Why] VBIOS light up eDP with 6bpc but driver use 8bpc without disable valid stream then re-enable valid stream. Some panels can't runtime change color depth. [How] Change fastboot timing validation function. Not only check LANE_COUNT, LINK_RATE...etc Reviewed-by:
Paul Hsieh <paul.hsieh@amd.com> Tested-by:
-
Dmytro Laktyushkin authored
Fix clamping to match register field size Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
-
Bing Guo authored
Why: When resume from sleep or hiberation, blocked MST Topology discovery might need to be used. How: Added "DETECT_REASON_RESUMEFROMS3S4" to enum dc_detect_reason; use it to require blocked MST Topology discovery. Reviewed-by:
Bing Guo <Bing.Guo@amd.com> Tested-by:
-
Eric Bernstein authored
remove static from optc31_set_drr Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
Eric Bernstein <eric.bernstein@amd.com> Tested-by:
-
Dmytro Laktyushkin authored
Unbounded requesting is unsupported on pipe split modes and this change prevents us running into such a situation with wide modes. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] Found when running igt@kms_atomic. Userspace attempts to do a TEST_COMMIT when 0 streams which calls dc_remove_stream_from_ctx. This in turn calls link_enc_unassign which ends up modifying stream->link = NULL directly, causing the global link_enc to be removed preventing further link activity and future link validation from passing. [How] We take care of link_enc unassignment at the start of link_enc_cfg_link_encs_assign so this call is no longer necessary. Fixes global state from being modified while unlocked. Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Eric Bernstein authored
[Why] Build failure due to ‘status’ may be used uninitialized [How] Initialize status to LINK_TRAINING_SUCCESS Reviewed-by:
-
Evan Quan authored
As there is no internal cache for enabled ppfeatures now. Thus the 2nd parameter will be not needed any more. Signed-off-by:
-
Evan Quan authored
As the enabled ppfeatures are just retrieved ahead. We can use that directly instead of retrieving again and again. Signed-off-by:
-
Evan Quan authored
The following scenarios make the driver cache for enabled ppfeatures outdated and invalid: - Other tools interact with PMFW to change the enabled ppfeatures. - PMFW may enable/disable some features behind driver's back. E.g. for sienna_cichild, on gfxoff entering, PMFW will disable gfx related DPM features. All those are performed without driver's notice. Also considering driver does not actually interact with PMFW such frequently, the benefit brought by such cache is very limited. Signed-off-by: -
Evan Quan authored
The supported features should be retrieved just after EnableAllDpmFeatures message complete. And the check(whether some dpm feature is supported) is only needed when we decide to enable or disable it. Signed-off-by:
-
Evan Quan authored
Use uint64_t instead of an array of uint32_t. This can avoid some non-necessary intermediate uint32_t -> uint64_t conversions. Signed-off-by:
-
Evan Quan authored
Instead of having two which do the same thing. Signed-off-by:
-
Evan Quan authored
As other dGPU asics, Renoir should use smu_cmn_get_enabled_mask() for that job. Signed-off-by:
-
Roman Li authored
[Why] pflip interrupt order are mapped 1 to 1 to otg id. e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2... Linux DM registers pflip interrupts per number of crtcs. In fused pipe case crtc numbers can be less than otg id. e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2 so DM only registers irq_src 26,27. This is a bug since if pipe#2 remains unfused DM never gets otg2 pflip interrupt (irq_src=28) That may results in gfx failure due to pflip timeout. [How] Register pflip interrupts per max num of otg instead of num_crtc Signed-off-by:
Roman Li <Roman.Li@amd.com> Reviewed-by:
-
Aaron Liu authored
Bypass group programming (utcl2_harvest) aims to forbid UTCL2 to send invalidation command to harvested SE/SA. Once invalidation command comes into harvested SE/SA, SE/SA has no response and system hang. This patch is to add checking if the GART table is already allocated before invalidating TLB. The new procedure is as following: 1. Calling amdgpu_gtt_mgr_init() in amdgpu_ttm_init(). After this step GTT BOs can be allocated, but GART mappings are still ignored. 2. Calling amdgpu_gart_table_vram_alloc() from the GMC code. This allocates the GART backing store. 3. Initializing the hardware, and programming the backing store into VMID0 for all VMHUBs. 4. Calling amdgpu_gtt_mgr_recover() to make sure the table is updated with the GTT allocations done before it was allocated. Signed-off-by:
Aaron Liu <aaron.liu@amd.com> Acked-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Aaron Liu authored
Confirmed with hardware team, there is harvesting for gc 10.3.1. Signed-off-by:
-
