[ Upstream commit 510fd8ea ]

bio_add_pc_page() may merge pages when a bio is padded due to a flush.
Fix iteration over the bio to free the correct pages in case of a merge.
Signed-off-by: Heiner Litz <hlitz@ucsc.edu>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e71afda4 ]

This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.

Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cee6c269 ]

If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:

  [  293.689160] nvme nvme0: failed to mark controller CONNECTING
  [  293.689160] nvme nvme0: Removing after probe failure status: 0

Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.

This patch makes it indicate the proper error value when it fails.
  [   25.932367] nvme nvme0: failed to mark controller CONNECTING
  [   25.932369] nvme nvme0: Removing after probe failure status: -16

This situation is able to be easily reproduced by:
  root@target:~# rmmod nvme && modprobe nvme && rmmod nvme
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2181e455 ]

When a shared namespace is removed, we call blk_cleanup_queue()
when the device can still be accessed as the current path and this can
result in submission to a dying queue. Hence, direct_make_request()
called by our mpath device may fail (propagating the failure to userspace).
Instead, we want to failover this I/O to a different path if one exists.
Thus, before we cleanup the request queue, we make sure that the device is
cleared from the current path nor it can be selected again as such.

Fix this by:
- clear the ns from the head->list and synchronize rcu to make sure there is
  no concurrent path search that restores it as the current path
- clear the mpath current path in order to trigger a subsequent path search
  and sync srcu to wait for any ongoing request submissions
- safely continue to namespace removal and blk_cleanup_queue
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 585fb3d9 ]

In edac_create_csrow_object(), the reference to the object is not
released when adding the device to the device hierarchy fails
(device_add()). This may result in a memory leak.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7adc05d2 ]

Do put_device() if device_add() fails.

 [ bp: do device_del() for the successfully created devices in
   edac_create_csrow_objects(), on the unwind path. ]
Signed-off-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20190427214925.GE16338@kroah.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f9481b08 ]

at91sam9g25ek showed the following error at probe:
atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx)
for DMA transfers
atmel_spi: probe of f0000000.spi failed with error -22

Commit 0a919ae4 ("spi: Don't call spi_get_gpio_descs() before device name is set")
moved the calling of spi_get_gpio_descs() after ctrl->dev is set,
but didn't move the !ctrl->num_chipselect check. When there are
chip selects in the device tree, the spi-atmel driver lets the
SPI core discover them when registering the SPI master.
The ctrl->num_chipselect is thus expected to be set by
spi_get_gpio_descs().

Move the !ctlr->num_chipselect after spi_get_gpio_descs() as it was
before the aforementioned commit. While touching this block, get rid
of the explicit comparison with 0 and update the commenting style.

Fixes: 0a919ae4 ("spi: Don't call spi_get_gpio_descs() before device name is set")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 44758baf ]

ACPI GPEs (other than the EC one) can be enabled in two situations.
First, the GPEs with existing _Lxx and _Exx methods are enabled
implicitly by ACPICA during system initialization.  Second, the
GPEs without these methods (like GPEs listed by _PRW objects for
wakeup devices) need to be enabled directly by the code that is
going to use them (e.g. ACPI power management or device drivers).

In the former case, if the status of a given GPE is set to start
with, its handler method (either _Lxx or _Exx) needs to be invoked
to take care of the events (possibly) signaled before the GPE was
enabled.  In the latter case, however, the first caller of
acpi_enable_gpe() for a given GPE should not be expected to care
about any events that might be signaled through it earlier.  In
that case, it is better to clear the status of the GPE before
enabling it, to prevent stale events from triggering unwanted
actions (like spurious system resume, for example).

For this reason, modify acpi_ev_add_gpe_reference() to take an
additional boolean argument indicating whether or not the GPE
status needs to be cleared when its reference counter changes from
zero to one and make acpi_enable_gpe() pass TRUE to it through
that new argument.

Fixes: 18996f2d ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Reported-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@google.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a3fb01ba ]

As is, iolatency recognizes done_bio and cleanup as ending paths. If a
request is marked REQ_NOWAIT and fails to get a request, the bio is
cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error().
This results in underflowing the inflight counter. Fix this by only
accounting bios that were actually submitted.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1b7aebf0 ]

cpuinfo_x86.x86_model is an unsigned type, so comparing against zero
will generate a compilation warning:

  arch/x86/kernel/cpu/cacheinfo.c: In function 'cacheinfo_amd_init_llc_id':
  arch/x86/kernel/cpu/cacheinfo.c:662:19: warning: comparison is always true \
    due to limited range of data type [-Wtype-limits]

Remove the unnecessary lower bound check.

 [ bp: Massage. ]

Fixes: 68091ee7 ("x86/CPU/AMD: Calculate last level cache ID from number of sharing threads")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560954773-11967-1-git-send-email-cai@lca.pwSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 39e3622e ]

Since we changed the Tx ring handling and now depends on bit31 to figure
out the owner of the descriptor, we should initialize this every time
the device goes down-up instead of doing it once on driver init. If the
value is not correctly initialized the device won't have any available
descriptors

Changes since v1:
- Typo fixes

Fixes: 35e07d23 ("net: socionext: remove mmio reads on Tx")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c2bf1fc2 ]

Currently Linux does not follow PCIe spec regarding the required delays
after reset. A concrete example is a Thunderbolt add-in-card that
consists of a PCIe switch and two PCIe endpoints:

  +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
                                  +-01.0-[04-36]-- DS hotplug port
                                  +-02.0-[37]----00.0 xHCI controller
                                  \-04.0-[38-6b]-- DS hotplug port

The root port (1b.0) and the PCIe switch downstream ports are all PCIe
gen3 so they support 8GT/s link speeds.

We wait for the PCIe hierarchy to enter D3cold (runtime):

  pcieport 0000:00:1b.0: power state changed by ACPI to D3cold

When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the
PCIe switch is put to reset and its power is re-applied. This means that
we must follow the rules in PCIe 4.0 section 6.6.1.

For the PCIe gen3 ports we are dealing with here, the following applies:

  With a Downstream Port that supports Link speeds greater than 5.0
  GT/s, software must wait a minimum of 100 ms after Link training
  completes before sending a Configuration Request to the device
  immediately below that Port. Software can determine when Link training
  completes by polling the Data Link Layer Link Active bit or by setting
  up an associated interrupt (see Section 6.7.3.3).

Translating this into the above topology we would need to do this (DLLLA
stands for Data Link Layer Link Active):

  pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0
  pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0
  pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0

I've instrumented the kernel with additional logging so we can see the
actual delays the kernel performs:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
  pcieport 0000:00:1b.0: waking up bus
  pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:00:1b.0: PME# disabled
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:01:00.0: PME# disabled
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:00.0: PME# disabled
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:01.0: PME# disabled
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: PME# disabled
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:04.0: PME# disabled
  pcieport 0000:02:01.0: PME# enabled
  pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
  pcieport 0000:02:04.0: PME# enabled
  pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)
  ...
  thunderbolt 0000:03:00.0: PME# disabled
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  xhci_hcd 0000:37:00.0: PME# disabled

For the switch upstream port (01:00.0) we wait for 100ms but not taking
into account the DLLLA requirement. We then wait 10ms for D3hot -> D0
transition of the root port and the two downstream hotplug ports. This
means that we deviate from what the spec requires.

Performing the same check for system sleep (s2idle) transitions we can
see following when resuming from s2idle:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0)
  pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001)
  pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702)
  pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001)
  pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00)
  pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400)
  pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151)
  pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00)
  pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161)
  pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402)
  pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802)
  pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302)
  pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)

This is even worse. None of the mandatory delays are performed. If this
would be S3 instead of s2idle then according to PCI FW spec 3.2 section
4.6.8.  there is a specific _DSM that allows the OS to skip the delays
but this platform does not provide the _DSM and does not go to S3 anyway
so no firmware is involved that could already handle these delays.

In this particular Intel Coffee Lake platform these delays are not
actually needed because there is an additional delay as part of the ACPI
power resource that is used to turn on power to the hierarchy but since
that additional delay is not required by any of standards (PCIe, ACPI)
it is not present in the Intel Ice Lake, for example where missing the
mandatory delays causes pciehp to start tearing down the stack too early
(links are not yet trained).

For this reason, change the PCIe portdrv PM resume hooks so that they
perform the mandatory delays before the downstream component gets
resumed. We perform the delays before port services are resumed because
otherwise pciehp might find that the link is not up (even if it is just
training) and tears-down the hierarchy.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eea1c227 ]

The commit 7640ead9 partially resolved the issue of callees
incorrectly pruning the callers.
With introduction of bounded loops and jmps_processed heuristic
single verifier state may contain multiple branches and calls.
It's possible that new verifier state (for future pruning) will be
allocated inside callee. Then callee will exit (still within the same
verifier state). It will go back to the caller and there R6-R9 registers
will be read and will trigger mark_reg_read. But the reg->live for all frames
but the top frame is not set to LIVE_NONE. Hence mark_reg_read will fail
to propagate liveness into parent and future walking will incorrectly
conclude that the states are equivalent because LIVE_READ is not set.
In other words the rule for parent/live should be:
whenever register parentage chain is set the reg->live should be set to LIVE_NONE.
is_state_visited logic already follows this rule for spilled registers.

Fixes: 7640ead9 ("bpf: verifier: make sure callees don't prune with caller differences")
Fixes: f4d7e40a ("bpf: introduce function calls (verification)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ac28ec07 ]

commit c16015f3 ("ASoC: rsnd: add .get_id/.get_id_sub")
introduces rsnd_ctu_id which calcualates and gives
the main Device id of the CTU by dividing the id by 4.
rsnd_mod_id uses this interface to get the CTU main
Device id. But this commit forgets to revert the main
Device id calcution previously done in rsnd_ctu_probe_
which also divides the id by 4. This path corrects the
same to get the correct main Device id.

The issue is observered when rsnd_ctu_probe_ is done for CTU1

Fixes: c16015f3 ("ASoC: rsnd: add .get_id/.get_id_sub")
Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 64d701c6 ]

in the case of IPoIB with SRIOV enabled hardware
ip link show command incorrecly prints
0 instead of a VF hardware address.

Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0     link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off

v1->v2: just copy an address without modifing ifla_vf_mac
v2->v3: update the changelog
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit efa14c39 ]

In some circumstances, the hardware can hand us a null receive
descriptor, with no data attached but otherwise valid. Unfortunately,
the driver was ill-equipped to handle such an event, and would stop
processing packets at that point.

To fix this, use the Descriptor Done bit instead of the size to
determine whether or not a descriptor is ready to be processed. Add some
checks to allow for unused buffers.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 098eadce ]

Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.

It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.

[1] https://patchwork.kernel.org/patch/3787671/Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fdbdd7e8 ]

In which case it simply returns "unknown", like when it can't figure out
the evsel->name value.

This makes this code more robust and fixes a problem in 'perf trace'
where a NULL evsel was being passed to a routine that only used the
evsel for printing its name when a invalid syscall id was passed.
Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f30ztaasku3z935cn3ak3h53@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 69d927bb ]

Recent probing at the Linux Kernel Memory Model uncovered a
'surprise'. Strongly ordered architectures where the atomic RmW
primitive implies full memory ordering and
smp_mb__{before,after}_atomic() are a simple barrier() (such as x86)
fail for:

	*x = 1;
	atomic_inc(u);
	smp_mb__after_atomic();
	r0 = *y;

Because, while the atomic_inc() implies memory order, it
(surprisingly) does not provide a compiler barrier. This then allows
the compiler to re-order like so:

	atomic_inc(u);
	*x = 1;
	smp_mb__after_atomic();
	r0 = *y;

Which the CPU is then allowed to re-order (under TSO rules) like:

	atomic_inc(u);
	r0 = *y;
	*x = 1;

And this very much was not intended. Therefore strengthen the atomic
RmW ops to include a compiler barrier.

NOTE: atomic_{or,and,xor} and the bitops already had the compiler
barrier.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8c655784 ]

With gcc-4.6.3:

    WARNING: vmlinux.o(.text.unlikely+0x24c64): Section mismatch in reference from the function __integrity_init_keyring() to the function .init.text:set_platform_trusted_keys()
    The function __integrity_init_keyring() references
    the function __init set_platform_trusted_keys().
    This is often because __integrity_init_keyring lacks a __init
    annotation or the annotation of set_platform_trusted_keys is wrong.

Indeed, if the compiler decides not to inline __integrity_init_keyring(),
a warning is issued.

Fix this by adding the missing __init annotation.

Fixes: 9dc92c45 ("integrity: Define a trusted platform keyring")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 543ac280 ]

Counting with invalid event coding for free-running counter may cause
OOPs, e.g. uncore_iio_free_running_0/event=1/.

Current code only validate the event with free-running event format,
event=0xff,umask=0xXY. Non-free-running event format never be checked
for the PMU with free-running counters.

Add generic hw_config() to check and reject the invalid event coding
for free-running PMU.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Fixes: 0f519f03 ("perf/x86/intel/uncore: Support IIO free-running counters on SKX")
Link: https://lkml.kernel.org/r/1556672028-119221-2-git-send-email-kan.liang@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d0e1a507 ]

Tom Vaden reported false failure of the check_msr() function, because
some servers can do POST tracing and enable LBR tracing during
bootup.

Kan confirmed that check_msr patch was to fix a bug report in
guest, so it's ok to disable it for real HW.
Reported-by: Tom Vaden <tom.vaden@hpe.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tom Vaden <tom.vaden@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190616141313.GD2500@krava
[ Readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 509466b7 ]

runnable_avg_yN_inv[] is only used in kernel/sched/pelt.c but was
included in several other places because they need other macros all
came from kernel/sched/sched-pelt.h which was generated by
Documentation/scheduler/sched-pelt. As the result, it causes compilation
a lot of warnings,

  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  ...

Silence it by appending the __maybe_unused attribute for it, so all
generated variables and macros can still be kept in the same file.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1559596304-31581-1-git-send-email-cai@lca.pwSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e3b929b0 ]

Non-inline io_schedule() was introduced in:

  commit 10ab5643 ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")

Keep in line with io_schedule_timeout(), otherwise "/proc/<pid>/wchan" will
report io_schedule() rather than its callers when waiting for IO.
Reported-by: Jilong Kou <koujilong@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 10ab5643 ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")
Link: https://lkml.kernel.org/r/20190603091338.2695-1-gaoxiang25@huawei.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b8d6d007 ]

After commit b38ff407, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
  mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
  'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4

In fact, the selector is not mandatory, allow the user to provide an empty
selector.

Fixes: b38ff407 ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 66311422 ]

wbc_account_io() collects information on cgroup ownership of writeback
pages to determine which cgroup should own the inode.  Pages can stay
associated with dead memcgs but we want to avoid attributing IOs to
dead blkcgs as much as possible as the association is likely to be
stale.  However, currently, pages associated with dead memcgs
contribute to the accounting delaying and/or confusing the
arbitration.

Fix it by ignoring pages associated with dead memcgs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7602843f ]

Dulicate call of null_del_dev() will trigger null pointer error like below.
The reason is a race condition between nullb_device_power_store() and
nullb_group_drop_item().

  CPU#0                         CPU#1
  ----------------              -----------------
  do_rmdir()
   >configfs_rmdir()
    >client_drop_item()
     >nullb_group_drop_item()
                                nullb_device_power_store()
				>null_del_dev()

      >test_and_clear_bit(NULLB_DEV_FL_UP
       >null_del_dev()
       ^^^^^
       Duplicated null_dev_dev() triger null pointer error

				>clear_bit(NULLB_DEV_FL_UP

The fix could be keep the sequnce of clear NULLB_DEV_FL_UP and null_del_dev().

[  698.613600] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[  698.613608] #PF error: [normal kernel read fault]
[  698.613611] PGD 0 P4D 0
[  698.613619] Oops: 0000 [#1] SMP PTI
[  698.613627] CPU: 3 PID: 6382 Comm: rmdir Not tainted 5.0.0+ #35
[  698.613631] Hardware name: LENOVO 20LJS2EV08/20LJS2EV08, BIOS R0SET33W (1.17 ) 07/18/2018
[  698.613644] RIP: 0010:null_del_dev+0xc/0x110 [null_blk]
[  698.613649] Code: 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b eb 97 e8 47 bb 2a e8 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <8b> 77 18 48 89 fb 4c 8b 27 48 c7 c7 40 57 1e c1 e8 bf c7 cb e8 48
[  698.613654] RSP: 0018:ffffb887888bfde0 EFLAGS: 00010286
[  698.613659] RAX: 0000000000000000 RBX: ffff9d436d92bc00 RCX: ffff9d43a9184681
[  698.613663] RDX: ffffffffc11e5c30 RSI: 0000000068be6540 RDI: 0000000000000000
[  698.613667] RBP: ffffb887888bfdf0 R08: 0000000000000001 R09: 0000000000000000
[  698.613671] R10: ffffb887888bfdd8 R11: 0000000000000f16 R12: ffff9d436d92bc08
[  698.613675] R13: ffff9d436d94e630 R14: ffffffffc11e5088 R15: ffffffffc11e5000
[  698.613680] FS:  00007faa68be6540(0000) GS:ffff9d43d14c0000(0000) knlGS:0000000000000000
[  698.613685] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  698.613689] CR2: 0000000000000018 CR3: 000000042f70c002 CR4: 00000000003606e0
[  698.613693] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  698.613697] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  698.613700] Call Trace:
[  698.613712]  nullb_group_drop_item+0x50/0x70 [null_blk]
[  698.613722]  client_drop_item+0x29/0x40
[  698.613728]  configfs_rmdir+0x1ed/0x300
[  698.613738]  vfs_rmdir+0xb2/0x130
[  698.613743]  do_rmdir+0x1c7/0x1e0
[  698.613750]  __x64_sys_rmdir+0x17/0x20
[  698.613759]  do_syscall_64+0x5a/0x110
[  698.613768]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3a30964a ]

The driver may not be able to disable the ring through firmware
when downing the netdev during reset process, which may cause
hardware accessing freed buffer problem.

This patch delays the ring buffer clearing to reset uninit
process because hardware will not access the ring buffer after
hardware reset is completed.

Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8f9eed1a ]

If hns3_nic_net_xmit does not return NETDEV_TX_BUSY when doing
a loopback selftest, the skb is not freed in hns3_clean_tx_ring
or hns3_nic_net_xmit, which causes skb not freed problem.

This patch fixes it by freeing skb when hns3_nic_net_xmit does
not return NETDEV_TX_OK.

Fixes: c39c4d98 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 75718800 ]

The netdev is dereferenced before null checking in the function
hns3_setup_tc.

This patch moves the dereferencing after the null checking.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cb94d52b ]

The driver needs to assign a lossless traffic class for the MPA ll2
connection to ensure no packets are dropped when returning from the
driver as they will never be re-transmitted by the peer.

Fixes: ae3488ff ("qed: Add ll2 connection for processing unaligned MPA packets")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cbb99c0f ]

Add the CPUID enumeration for Intel's de-feature bits to accommodate
passing these de-features through to kvm guests.

These de-features are (from SDM vol 1, section 8.1.8):
 - X86_FEATURE_FDP_EXCPTN_ONLY: If CPUID.(EAX=07H,ECX=0H):EBX[bit 6] = 1, the
   data pointer (FDP) is updated only for the x87 non-control instructions that
   incur unmasked x87 exceptions.
 - X86_FEATURE_ZERO_FCS_FDS: If CPUID.(EAX=07H,ECX=0H):EBX[bit 13] = 1, the
   processor deprecates FCS and FDS; it saves each as 0000H.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: marcorr@google.com
Cc: Peter Feiner <pfeiner@google.com>
Cc: pshier@google.com
Cc: Robert Hoo <robert.hu@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190605220252.103406-1-aaronlewis@google.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6da9f775 ]

When debugging options are turned on, the rcu_read_lock() function
might not be inlined. This results in lockdep's print_lock() function
printing "rcu_read_lock+0x0/0x70" instead of rcu_read_lock()'s caller.
For example:

[   10.579995] =============================
[   10.584033] WARNING: suspicious RCU usage
[   10.588074] 4.18.0.memcg_v2+ #1 Not tainted
[   10.593162] -----------------------------
[   10.597203] include/linux/rcupdate.h:281 Illegal context switch in
RCU read-side critical section!
[   10.606220]
[   10.606220] other info that might help us debug this:
[   10.606220]
[   10.614280]
[   10.614280] rcu_scheduler_active = 2, debug_locks = 1
[   10.620853] 3 locks held by systemd/1:
[   10.624632]  #0: (____ptrval____) (&type->i_mutex_dir_key#5){.+.+}, at: lookup_slow+0x42/0x70
[   10.633232]  #1: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70
[   10.640954]  #2: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70

These "rcu_read_lock+0x0/0x70" strings are not providing any useful
information.  This commit therefore forces inlining of the rcu_read_lock()
function so that rcu_read_lock()'s caller is instead shown.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cb36ff78 ]

The content of SND_SOC_DAIFMT_FORMAT_MASK is a number, not a bitfield,
so the test to check if the format is i2s is wrong. Because of this the
clock setting may be wrong. For example, the sample clock gets inverted
in DSP B mode, when it should not.

Fix the lrclk invert helper function

Fixes: 1a11d88f ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e32d045c ]

Add the CPUID model number of Ice Lake Neural Network Processor for Deep
Learning Inference (ICL-NNPI) to the Intel family list. Ice Lake NNPI uses
model number 0x9D and this will be documented in a future version of Intel
Software Development Manual.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190606012419.13250-1-rajneesh.bhardwaj@linux.intel.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e63e1b0d ]

Call cond_resched() after each fuzz test iteration.  This avoids stall
warnings if fuzz_iterations is set very high for testing purposes.

While we're at it, also call cond_resched() after finishing testing each
test vector.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 464c258a ]

When sid == 0 (we are resetting keycreate_sid to the default value), we
should skip the KEY__CREATE check.

Before this patch, doing a zero-sized write to /proc/self/keycreate
would check if the current task can create unlabeled keys (which would
usually fail with -EACCESS and generate an AVC). Now it skips the check
and correctly sets the task's keycreate_sid to 0.

Bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1719067

Tested using the reproducer from the report above.

Fixes: 4eb582cf ("[PATCH] keys: add a way to store the appropriate context for newly-created keys")
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit be22203a ]

MFC v6 and v7 has no register to read min scratch buffer size, so it has
to be read conditionally only if hardware supports it. This fixes following
NULL pointer exception on SoCs with MFC v6/v7:

8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = f25837f9
[00000000] *pgd=bd93d835
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: btmrvl_sdio btmrvl bluetooth mwifiex_sdio mwifiex ecdh_generic ecc
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at s5p_mfc_get_min_scratch_buf_size+0x30/0x3c
LR is at s5p_mfc_get_min_scratch_buf_size+0x28/0x3c
...
[<c074f998>] (s5p_mfc_get_min_scratch_buf_size) from [<c0745bc0>] (s5p_mfc_irq+0x814/0xa5c)
[<c0745bc0>] (s5p_mfc_irq) from [<c019a218>] (__handle_irq_event_percpu+0x64/0x3f8)
[<c019a218>] (__handle_irq_event_percpu) from [<c019a5d8>] (handle_irq_event_percpu+0x2c/0x7c)
[<c019a5d8>] (handle_irq_event_percpu) from [<c019a660>] (handle_irq_event+0x38/0x5c)
[<c019a660>] (handle_irq_event) from [<c019ebc4>] (handle_fasteoi_irq+0xc4/0x180)
[<c019ebc4>] (handle_fasteoi_irq) from [<c0199270>] (generic_handle_irq+0x24/0x34)
[<c0199270>] (generic_handle_irq) from [<c0199888>] (__handle_domain_irq+0x7c/0xec)
[<c0199888>] (__handle_domain_irq) from [<c04ac298>] (gic_handle_irq+0x58/0x9c)
[<c04ac298>] (gic_handle_irq) from [<c0101ab0>] (__irq_svc+0x70/0xb0)
Exception stack(0xe73ddc60 to 0xe73ddca8)
...
[<c0101ab0>] (__irq_svc) from [<c01967d8>] (console_unlock+0x5a8/0x6a8)
[<c01967d8>] (console_unlock) from [<c01981d0>] (vprintk_emit+0x118/0x2d8)
[<c01981d0>] (vprintk_emit) from [<c01983b0>] (vprintk_default+0x20/0x28)
[<c01983b0>] (vprintk_default) from [<c01989b4>] (printk+0x30/0x54)
[<c01989b4>] (printk) from [<c07500b8>] (s5p_mfc_init_decode_v6+0x1d4/0x284)
[<c07500b8>] (s5p_mfc_init_decode_v6) from [<c07230d0>] (vb2_start_streaming+0x24/0x150)
[<c07230d0>] (vb2_start_streaming) from [<c0724e4c>] (vb2_core_streamon+0x11c/0x15c)
[<c0724e4c>] (vb2_core_streamon) from [<c07478b8>] (vidioc_streamon+0x64/0xa0)
[<c07478b8>] (vidioc_streamon) from [<c0709640>] (__video_do_ioctl+0x28c/0x45c)
[<c0709640>] (__video_do_ioctl) from [<c0709bc8>] (video_usercopy+0x260/0x8a4)
[<c0709bc8>] (video_usercopy) from [<c02b3820>] (do_vfs_ioctl+0xb0/0x9fc)
[<c02b3820>] (do_vfs_ioctl) from [<c02b41a0>] (ksys_ioctl+0x34/0x58)
[<c02b41a0>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xe73ddfa8 to 0xe73ddff0)
...
---[ end trace 376cf5ba6e0bee93 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit aee450cb ]

Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:

kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~

98 copies of the above.

The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 64f883cd ]

If vpif_probe() fails on v4l2_device_register() and vpif_probe_complete(),
then memory allocated at initialize_vpif() for global vpif_obj.dev[i]
become unreleased.

The patch adds deallocation of vpif_obj.dev[i] on the error path.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>