- 03 Apr, 2019 2 commits
-
-
Khalid Elmously authored
BugLink: http://bugs.launchpad.net/bugs/1786013Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Khalid Elmously authored
BugLink: http://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
- 01 Apr, 2019 38 commits
-
-
Andrea Righi authored
Buglink: https://bugs.launchpad.net/bugs/1812845 Parity page is incorrectly unmapped in finish_parity_scrub(), triggering a reference counter bug on i386, i.e.: [ 157.662401] kernel BUG at mm/highmem.c:349! [ 157.666725] invalid opcode: 0000 [#1] SMP PTI The reason is that kunmap(p_page) was completely left out, so we never did an unmap for the p_page and the loop unmapping the rbio page was iterating over the wrong number of stripes: unmapping should be done with nr_data instead of rbio->real_stripes. Test case to reproduce the bug: - create a raid5 btrfs filesystem: # mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde - mount it: # mount /dev/sdb /mnt - run btrfs scrub in a loop: # while :; do btrfs scrub start -BR /mnt; done BugLink: https://bugs.launchpad.net/bugs/1812845 Fixes: 5a6ac9ea ("Btrfs, raid56: support parity scrub on raid56") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1822271Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by:
-
Wanpeng Li authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit bbeac283 upstream. Reported by syzkaller: The kvm-intel.unrestricted_guest=0 WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] CPU: 5 PID: 1014 Comm: warn_test Tainted: G W OE 4.13.0-rc3+ #8 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] Call Trace: ? put_pid+0x3a/0x50 ? rcu_read_lock_sched_held+0x79/0x80 ? kmem_cache_free+0x2f2/0x350 kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 ? __this_cpu_preempt_check+0x13/0x20 The syszkaller folks reported a residual mmio emulation request to userspace due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs several threads to launch the same vCPU, the thread which lauch this vCPU after the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will trigger the warning. #define _GNU_SOURCE #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/wait.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/mman.h> #include <fcntl.h> #include <unistd.h> #include <linux/kvm.h> #include <stdio.h> int kvmcpu; struct kvm_run *run; void* thr(void* arg) { int res; res = ioctl(kvmcpu, KVM_RUN, 0); printf("ret1=%d exit_reason=%d suberror=%d\n", res, run->exit_reason, run->internal.suberror); return 0; } void test() { int i, kvm, kvmvm; pthread_t th[4]; kvm = open("/dev/kvm", O_RDWR); kvmvm = ioctl(kvm, KVM_CREATE_VM, 0); kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0); run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0); srand(getpid()); for (i = 0; i < 4; i++) { pthread_create(&th[i], 0, thr, 0); usleep(rand() % 10000); } for (i = 0; i < 4; i++) pthread_join(th[i], 0); } int main() { for (;;) { int pid = fork(); if (pid < 0) exit(1); if (pid == 0) { test(); exit(0); } int status; while (waitpid(pid, &status, __WALL) != pid) {} } return 0; } This patch fixes it by resetting the vcpu->mmio_needed once we receive the triple fault to avoid the residue. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 34333cc6 upstream. Regarding segments with a limit==0xffffffff, the SDM officially states: When the effective limit is FFFFFFFFH (4 GBytes), these accesses may or may not cause the indicated exceptions. Behavior is implementation-specific and may vary from one execution to another. In practice, all CPUs that support VMX ignore limit checks for "flat segments", i.e. an expand-up data or code segment with base=0 and limit=0xffffffff. This is subtly different than wrapping the effective address calculation based on the address size, as the flat segment behavior also applies to accesses that would wrap the 4g boundary, e.g. a 4-byte access starting at 0xffffffff will access linear addresses 0xffffffff, 0x0, 0x1 and 0x2. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 946c522b upstream. The VMCS.EXIT_QUALIFCATION field reports the displacements of memory operands for various instructions, including VMX instructions, as a naturally sized unsigned value, but masks the value by the addr size, e.g. given a ModRM encoded as -0x28(%ebp), the -0x28 displacement is reported as 0xffffffd8 for a 32-bit address size. Despite some weird wording regarding sign extension, the SDM explicitly states that bits beyond the instructions address size are undefined: In all cases, bits of this field beyond the instructionâ€
™ s address size are undefined. Failure to sign extend the displacement results in KVM incorrectly treating a negative displacement as a large positive displacement when the address size of the VMX instruction is smaller than KVM's native size, e.g. a 32-bit address size on a 64-bit KVM. The very original decoding, added by commit 064aea77 ("KVM: nVMX: Decoding memory operands of VMX instructions"), sort of modeled sign extension by truncating the final virtual/linear address for a 32-bit address size. I.e. it messed up the effective address but made it work by adjusting the final address. When segmentation checks were added, the truncation logic was kept as-is and no sign extension logic was introduced. In other words, it kept calculating the wrong effective address while mostly generating the correct virtual/linear address. As the effective address is what's used in the segment limit checks, this results in KVM incorreclty injecting #GP/#SS faults due to non-existent segment violations when a nested VMM uses negative displacements with an address size smaller than KVM's native address size. Using the -0x28(%ebp) example, an EBP value of 0x1000 will result in KVM using 0x100000fd8 as the effective address when checking for a segment limit violation. This causes a 100% failure rate when running a 32-bit KVM build as L1 on top of a 64-bit KVM L0. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by: -
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit cc5034a5 upstream. Add missing break statement in order to prevent the code from falling through to case CB_TARGET_MASK. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: dd220a00 ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sakari Ailus authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 9dd0627d upstream. The UVC video driver converts the timestamp from hardware specific unit to one known by the kernel at the time when the buffer is dequeued. This is fine in general, but the streamoff operation consists of the following steps (among other things): 1. uvc_video_clock_cleanup --- the hardware clock sample array is released and the pointer to the array is set to NULL, 2. buffers in active state are returned to the user and 3. buf_finish callback is called on buffers that are prepared. buf_finish includes calling uvc_video_clock_update that accesses the hardware clock sample array. The above is serialised by a queue specific mutex. Address the problem by skipping the clock conversion if the hardware clock sample array is already released. Fixes: 9c0863b1 ("[media] vb2: call buf_finish from __queue_cancel") Reported-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Zhang, Jun authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 1d1f898d upstream. The rcu_gp_kthread_wake() function is invoked when it might be necessary to wake the RCU grace-period kthread. Because self-wakeups are normally a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from this kthread, it naturally refuses to do the wakeup. Unfortunately, natural though it might be, this heuristic fails when rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler that interrupted the grace-period kthread just after the final check of the wait-event condition but just before the schedule() call. In this case, a wakeup is required, even though the call to rcu_gp_kthread_wake() is within the RCU grace-period kthread's context. Failing to provide this wakeup can result in grace periods failing to start, which in turn results in out-of-memory conditions. This race window is quite narrow, but it actually did happen during real testing. It would of course need to be fixed even if it was strictly theoretical in nature. This patch does not Cc stable because it does not apply cleanly to earlier kernel versions. Fixes: 48a7639c ("rcu: Make callers awaken grace-period kthread") Reported-by:
"He, Bo" <bo.he@intel.com> Co-developed-by:
"Zhang, Jun" <jun.zhang@intel.com> Co-developed-by:
"xiao, jin" <jin.xiao@intel.com> Co-developed-by:
Bai, Jie A <jie.a.bai@intel.com> Signed-off: "Zhang, Jun" <jun.zhang@intel.com> Signed-off: "He, Bo" <bo.he@intel.com> Signed-off: "xiao, jin" <jin.xiao@intel.com> Signed-off: Bai, Jie A <jie.a.bai@intel.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.ibm.com> Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.comSigned-off-by:
-
Viresh Kumar authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 1fad17fb upstream. If wakeup_source_add() is called right after wakeup_source_remove() for the same wakeup source, timer_setup() may be called for a potentially scheduled timer which is incorrect. To avoid that, move the wakeup source timer cancellation from wakeup_source_drop() to wakeup_source_remove(). Moreover, make wakeup_source_remove() clear the timer function after canceling the timer to let wakeup_source_not_registered() treat unregistered wakeup sources in the same way as the ones that have never been registered. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ [ rjw: Subject, changelog, merged two patches together ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Yihao Wu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit dd838821 upstream. Commit 62a063b8 "nfsd4: fix crash on writing v4_end_grace before nfsd startup" is trying to fix a NULL dereference issue, but it mistakenly checks if the nfsd server is started. So fix it. Fixes: 62a063b8 "nfsd4: fix crash on writing v4_end_grace before nfsd startup" Cc: stable@vger.kernel.org Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by:
Yihao Wu <wuyihao@linux.alibaba.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit b602345d upstream. If the result of an NFSv3 readdir{,plus} request results in the "offset" on one entry having to be split across 2 pages, and is sized so that the next directory entry doesn't fit in the requested size, then memory corruption can happen. When encode_entry() is called after encoding the last entry that fits, it notices that ->offset and ->offset1 are set, and so stores the offset value in the two pages as required. It clears ->offset1 but *does not* clear ->offset. Normally this omission doesn't matter as encode_entry_baggage() will be called, and will set ->offset to a suitable value (not on a page boundary). But in the case where cd->buflen < elen and nfserr_toosmall is returned, ->offset is not reset. This means that nfsd3proc_readdirplus will see ->offset with a value 4 bytes before the end of a page, and ->offset1 set to NULL. It will try to write 8bytes to ->offset. If we are lucky, the next page will be read-only, and the system will BUG: unable to handle kernel paging request at... If we are unlucky, some innocent page will have the first 4 bytes corrupted. nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly writes 8 bytes to the offset wherever it is. Fix this by clearing ->offset after it is used, and copying the ->offset handling code from nfsd3_proc_readdirplus into nfsd3_proc_readdir. (Note that the commit hash in the Fixes tag is from the 'history' tree - this bug predates git). Fixes: 0b1d57cf ("[PATCH] kNFSd: Fix nfs3 dentry encoding") Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654 Cc: stable@vger.kernel.org (v2.6.12+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 8127d827 upstream. If the I/O completion failed with a fatal error, then we should just exit nfs_pageio_complete_mirror() rather than try to recoalesce. Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 4d91969e upstream. Whether we need to exit early, or just reprocess the list, we must not lost track of the request which failed to get recoalesced. Fixes: 03d5eb65 ("NFS: Fix a memory leak in nfs_do_recoalesce") Signed-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit e406f12d upstream. mddev->sync_thread can be set to NULL on kzalloc failure downstream. The patch checks for such a scenario and frees allocated resources. Committer node: Added similar fix to raid5.c, as suggested by Guoqing. Cc: stable@vger.kernel.org # v3.16+ Acked-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 5a99d99e upstream. Auxtrace records might have up to 7 bytes of padding appended. Adjust the overlap accordingly. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190206103947.15750-3-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit c3fcadf0 upstream. Define auxtrace record alignment so that it can be referenced elsewhere. Note this is preparation for patch "perf intel-pt: Fix overlap calculation for padding" Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 03997612 upstream. CYC packet timestamp calculation depends upon CBR which was being cleared upon overflow (OVF). That can cause errors due to failing to synchronize with sideband events. Even if a CBR change has been lost, the old CBR is still a better estimate than zero. So remove the clearing of CBR. Signed-off-by:
-
Peng Tao authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit d600ad1f upstream. For ERESTARTSYS/EIO/EROFS/ENOSPC/E2BIG in layoutget, we should just bail out instead of hiding the error and retrying inband IO. Change all the call sites to pop the error all the way up. Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 0bdb50c5 upstream. A dm-raid array with devices larger than 4GB won't assemble on a 32 bit host since _check_data_dev_sectors() was added in 4.16. This is because to_sector() treats its argument as an "unsigned long" which is 32bits (4GB) on a 32bit host. Using "unsigned long long" is more correct. Kernels as early as 4.2 can have other problems due to to_sector() being used on the size of a device. Fixes: 0cf45031 ("dm raid: add support for the MD RAID0 personality") cc: stable@vger.kernel.org (v4.2+) Reported-and-tested-by:
Guillaume Perréal <gperreal@free.fr> Signed-off-by:
NeilBrown <neil@brown.name> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit e2477233 upstream. Fix boolean expressions by using logical AND operator '&&' instead of bitwise operator '&'. This issue was detected with the help of Coccinelle. Fixes: 4fa084af ("ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.") Cc: stable@vger.kernel.org Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 36da5ff0 upstream. The 83xx has 8 SPRG registers and uses at least SPRG4 for DTLB handling LRU. Fixes: 2319f123 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround") Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jordan Niethe authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 7b62f9bd upstream. Currently the opal log is globally readable. It is kernel policy to limit the visibility of physical addresses / kernel pointers to root. Given this and the fact the opal log may contain this information it would be better to limit the readability to root. Fixes: bfc36894 ("powerpc/powernv: Add OPAL message log interface") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Reviewed-by:
Stewart Smith <stewart@linux.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 6d183ca8 upstream. 'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC deny the use of BATS for mapping memory. This patch makes sure that the specific wii RAM mapping function takes it into account as well. Fixes: de32400d ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by:
Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 9580b71b upstream. Clear the on-stack STACK_FRAME_REGS_MARKER on exception exit in order to avoid confusing stacktrace like the one below. Call Trace: [c0e9dca0] [c01c42a0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c4684] kasan_report+0xfc/0x180 [c0e9dd10] [c0895130] memchr+0x24/0x74 [c0e9dd30] [c00a9e38] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab710] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc60] vprintk_emit+0x188/0x1c4 --- interrupt: c0e9df00 at 0x400f330 LR = init_stack+0x1f00/0x2000 [c0e9de80] [c00ae3c4] printk+0xa8/0xcc (unreliable) [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 With this patch the trace becomes: Call Trace: [c0e9dca0] [c01c42c0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c46a4] kasan_report+0xfc/0x180 [c0e9dd10] [c0895150] memchr+0x24/0x74 [c0e9dd30] [c00a9e58] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab730] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc80] vprintk_emit+0x188/0x1c4 [c0e9de80] [c00ae3e4] printk+0xa8/0xcc [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 Cc: stable@vger.kernel.org Signed-off-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 01215d3e upstream. The jh pointer may be used uninitialized in the two cases below and the compiler complain about it when enabling JBUFFER_TRACE macro, fix them. In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here struct journal_head *jh; ^ In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here struct journal_head *jh; ^ Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 904cdbd4 upstream. Now, we capture a data corruption problem on ext4 while we're truncating an extent index block. Imaging that if we are revoking a buffer which has been journaled by the committing transaction, the buffer's jbddirty flag will not be cleared in jbd2_journal_forget(), so the commit code will set the buffer dirty flag again after refile the buffer. fsx kjournald2 jbd2_journal_commit_transaction jbd2_journal_revoke commit phase 1~5... jbd2_journal_forget belongs to older transaction commit phase 6 jbddirty not clear __jbd2_journal_refile_buffer __jbd2_journal_unfile_buffer test_clear_buffer_jbddirty mark_buffer_dirty Finally, if the freed extent index block was allocated again as data block by some other files, it may corrupt the file data after writing cached pages later, such as during unmount time. (In general, clean_bdev_aliases() related helpers should be invoked after re-allocation to prevent the above corruption, but unfortunately we missed it when zeroout the head of extra extent blocks in ext4_ext_handle_unwritten_extents()). This patch mark buffer as freed and set j_next_transaction to the new transaction when it already belongs to the committing transaction in jbd2_journal_forget(), so that commit code knows it should clear dirty bits when it is done with the buffer. This problem can be reproduced by xfstests generic/455 easily with seeds (3246 3247 3248 3249). Signed-off-by:
-
Jay Dolan authored
serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup() BugLink: https://bugs.launchpad.net/bugs/1822271 commit 78d3820b upstream. The four port Pericom chips have the fourth port at the wrong address. Make use of quirk to fix it. Fixes: c8d19242 ("serial: 8250: added acces i/o products quad and octal serial cards") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jay Dolan <jay.dolan@accesio.com> Signed-off-by:
-
Jay Dolan authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit b896b03b upstream. Have the correct number of ports created for ACCES serial cards. Two port cards show up as four ports, and four port cards show up as eight. Fixes: c8d19242 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by:
-
Arnaldo Carvalho de Melo authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 7d7d1bf1 upstream. We can't access kernel files directly from tools/, so copy the required bits, and make sure that we detect when the original files, in the kernel, gets modified. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-z7e76274ch5j4nugv048qacb@git.kernel.orgSigned-off-by:
Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by:
-
Sowjanya Komatineni authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit f4e3f4ae upstream. Tegra186 and prior supports maximum 4K bytes per packet transfer including 12 bytes of packet header. This patch fixes max write length limit to account packet header size for transfers. Cc: stable@vger.kernel.org # 4.4+ Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
QiaoChong authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 21698fd5 upstream. In the original code before 181bf1e8 the loop was continuing until it finds the first matching superios[i].io and p->base. But after 181bf1e8 the logic changed and the loop now returns the pointer to the first mismatched array element which is then used in get_superio_dma() and get_superio_irq() and thus returning the wrong value. Fix the condition so that it now returns the correct pointer. Fixes: 181bf1e8 ("parport_pc: clean up the modified while loops using for") Cc: Alan Cox <alan@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
QiaoChong <qiaochong@loongson.cn> [rewrite the commit message] Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 9ed3f222 upstream. When an output port driver is removed, also remove references to it from any masters. Failing to do this causes a NULL ptr dereference when configuring another output port: > BUG: unable to handle kernel NULL pointer dereference at 000000000000000d > RIP: 0010:master_attr_store+0x9d/0x160 [intel_th_gth] > Call Trace: > dev_attr_store+0x1b/0x30 > sysfs_kf_write+0x3c/0x50 > kernfs_fop_write+0x125/0x1a0 > __vfs_write+0x3a/0x190 > ? __vfs_write+0x5/0x190 > ? _cond_resched+0x1a/0x50 > ? rcu_all_qs+0x5/0xb0 > ? __vfs_write+0x5/0x190 > vfs_write+0xb8/0x1b0 > ksys_write+0x55/0xc0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x5a/0x140 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: b27a6a3f ("intel_th: Add Global Trace Hub driver") CC: stable@vger.kernel.org # v4.4+ Reported-by:
Ammy Yi <ammy.yi@intel.com> Signed-off-by:
-
Zev Weiss authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 8cf7630b upstream. This bug has apparently existed since the introduction of this function in the pre-git era (4500e917 in Thomas Gleixner's history.git, "[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of neighbour sysctls."). As a minimal fix we can simply duplicate the corresponding check in do_proc_dointvec_conv(). Link: http://lkml.kernel.org/r/20190207123426.9202-3-zev@bewilderbeest.netSigned-off-by:
Zev Weiss <zev@bewilderbeest.net> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> [2.6.2+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Roman Penyaev authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 401592d2 upstream. When VM_NO_GUARD is not set area->size includes adjacent guard page, thus for correct size checking get_vm_area_size() should be used, but not area->size. This fixes possible kernel oops when userspace tries to mmap an area on 1 page bigger than was allocated by vmalloc_user() call: the size check inside remap_vmalloc_range_partial() accounts non-existing guard page also, so check successfully passes but vmalloc_to_page() returns NULL (guard page does not physically exist). The following code pattern example should trigger an oops: static int oops_mmap(struct file *file, struct vm_area_struct *vma) { void *mem; mem = vmalloc_user(4096); BUG_ON(!mem); /* Do not care about mem leak */ return remap_vmalloc_range(vma, mem, 0); } And userspace simply mmaps size + PAGE_SIZE: mmap(NULL, 8192, PROT_WRITE|PROT_READ, MAP_PRIVATE, fd, 0); Possible candidates for oops which do not have any explicit size checks: *** drivers/media/usb/stkwebcam/stk-webcam.c: v4l_stk_mmap[789] ret = remap_vmalloc_range(vma, sbuf->buffer, 0); Or the following one: *** drivers/video/fbdev/core/fbmem.c static int fb_mmap(struct file *file, struct vm_area_struct * vma) ... res = fb->fb_mmap(info, vma); Where fb_mmap callback calls remap_vmalloc_range() directly without any explicit checks: *** drivers/video/fbdev/vfb.c static int vfb_mmap(struct fb_info *info, struct vm_area_struct *vma) { return remap_vmalloc_range(vma, (void *)info->fix.smem_start, vma->vm_pgoff); } Link: http://lkml.kernel.org/r/20190103145954.16942-2-rpenyaev@suse.deSigned-off-by:
Roman Penyaev <rpenyaev@suse.de> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Joe Perches <joe@perches.com> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Phuong Nguyen authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit d9140a0d upstream. This commit fixes the issue that USB-DMAC hangs silently after system resumes on R-Car Gen3 hence renesas_usbhs will not work correctly when using USB-DMAC for bulk transfer e.g. ethernet or serial gadgets. The issue can be reproduced by these steps: 1. modprobe g_serial 2. Suspend and resume system. 3. connect a usb cable to host side 4. Transfer data from Host to Target 5. cat /dev/ttyGS0 (Target side) 6. echo "test" > /dev/ttyACM0 (Host side) The 'cat' will not result anything. However, system still can work normally. Currently, USB-DMAC driver does not have system sleep callbacks hence this driver relies on the PM core to force runtime suspend/resume to suspend and reinitialize USB-DMAC during system resume. After the commit 17218e00 ("PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()"), PM core will not force runtime suspend/resume anymore so this issue happens. To solve this, make system suspend resume explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks. SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC suspended after and initialized before renesas_usbhs." Signed-off-by:
Phuong Nguyen <phuong.nguyen.xw@renesas.com> Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: <stable@vger.kernel.org> # v4.16+ [shimoda: revise the commit log and add Cc tag] Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Paul Cercueil authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit bc5d922c upstream. Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz. This results in a theorical divider of 41.999993 which is then rounded up to 42. The .round_rate function would then return (180 MHz / 42) as the clock, rounded down, so 4.285714 MHz. Calling clk_set_rate on 4.285714 MHz would round the rate again, and give a theorical divider of 42,0000028, now rounded up to 43, and the rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not what we requested. Fix this by rounding up the divisions. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 1c2d1421 upstream. When ext2 filesystem is created with 64k block size, ext2_max_size() will return value less than 0. Also, we cannot write any file in this fs since the sb->maxbytes is less than 0. The core of the problem is that the size of block index tree for such large block size is more than i_blocks can carry. So fix the computation to count with this possibility. File size limits computed with the new function for the full range of possible block sizes look like: bits file_size 10 17247252480 11 275415851008 12 2196873666560 13 2197948973056 14 2198486220800 15 2198754754560 16 2198888906752 CC: stable@vger.kernel.org Reported-by:
yangerkun <yangerkun@huawei.com> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit f96c3ac8 upstream. When computing maximum size of filesystem possible with given number of group descriptor blocks, we forget to include s_first_data_block into the number of blocks. Thus for filesystems with non-zero s_first_data_block it can happen that computed maximum filesystem size is actually lower than current filesystem size which confuses the code and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on flex_gd->count == 0. The problem can be reproduced like: truncate -s 100g /tmp/image mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768 mount -t ext4 -o loop /tmp/image /mnt resize2fs /dev/loop0 262145 resize2fs /dev/loop0 300000 Fix the problem by properly including s_first_data_block into the computed number of filesystem blocks. Fixes: 1c6bd717 "ext4: convert file system to meta_bg if needed..." Signed-off-by:
-
