- 12 Oct, 2017 27 commits
-
-
LEROY Christophe authored
On SEC2, when using the old descriptors type (hmac snoop no afeu) for doing IPsec, the CICV out pointeur points out of the allocated memory. [ 2.502554] ============================================================================= [ 2.510740] BUG dma-kmalloc-256 (Not tainted): Redzone overwritten [ 2.516907] ----------------------------------------------------------------------------- [ 2.516907] [ 2.526535] Disabling lock debugging due to kernel taint [ 2.531845] INFO: 0xde858108-0xde85810b. First byte 0xf8 instead of 0xcc [ 2.538549] INFO: Allocated in 0x806181a9 age=0 cpu=0 pid=58 [ 2.544229] __kmalloc+0x374/0x564 [ 2.547649] talitos_edesc_alloc+0x17c/0x48c [ 2.551929] aead_edesc_alloc+0x80/0x154 [ 2.555863] aead_encrypt+0x30/0xe0 [ 2.559368] __test_aead+0x5a0/0x1f3c [ 2.563042] test_aead+0x2c/0x110 [ 2.566371] alg_test_aead+0x5c/0xf4 [ 2.569958] alg_test+0x1dc/0x5a0 [ 2.573305] cryptomgr_test+0x50/0x70 [ 2.576984] kthread+0xd8/0x134 [ 2.580155] ret_from_kernel_thread+0x5c/0x64 [ 2.584534] INFO: Freed in ipsec_esp_encrypt_done+0x130/0x240 age=6 cpu=0 pid=0 [ 2.591839] ipsec_esp_encrypt_done+0x130/0x240 [ 2.596395] flush_channel+0x1dc/0x488 [ 2.600161] talitos2_done_4ch+0x30/0x200 [ 2.604185] tasklet_action+0xa0/0x13c [ 2.607948] __do_softirq+0x148/0x6cc [ 2.611623] irq_exit+0xc0/0x124 [ 2.614869] call_do_irq+0x24/0x3c [ 2.618292] do_IRQ+0x78/0x108 [ 2.621369] ret_from_except+0x0/0x14 [ 2.625055] finish_task_switch+0x58/0x350 [ 2.629165] schedule+0x80/0x134 [ 2.632409] schedule_preempt_disabled+0x38/0xc8 [ 2.637042] cpu_startup_entry+0xe4/0x190 [ 2.641074] start_kernel+0x3f4/0x408 [ 2.644741] 0x3438 [ 2.646857] INFO: Slab 0xdffbdb00 objects=9 used=1 fp=0xde8581c0 flags=0x0080 [ 2.653978] INFO: Object 0xde858008 @offset=8 fp=0xca4395df [ 2.653978] [ 2.661032] Redzone de858000: cc cc cc cc cc cc cc cc ........ [ 2.669029] Object de858008: 00 00 00 02 00 00 00 02 00 6b 6b 6b 1e 83 ea 28 .........kkk...( [ 2.677628] Object de858018: 00 00 00 70 1e 85 80 64 ff 73 1d 21 6b 6b 6b 6b ...p...d.s.!kkkk [ 2.686228] Object de858028: 00 20 00 00 1e 84 17 24 00 10 00 00 1e 85 70 00 . .....$......p. [ 2.694829] Object de858038: 00 18 00 00 1e 84 17 44 00 08 00 00 1e 83 ea 28 .......D.......( [ 2.703430] Object de858048: 00 80 00 00 1e 84 f0 00 00 80 00 00 1e 85 70 10 ..............p. [ 2.712030] Object de858058: 00 20 6b 00 1e 85 80 f4 6b 6b 6b 6b 00 80 02 00 . k.....kkkk.... [ 2.720629] Object de858068: 1e 84 f0 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk [ 2.729230] Object de858078: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 2.737830] Object de858088: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 2.746429] Object de858098: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 2.755029] Object de8580a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 2.763628] Object de8580b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 2.772229] Object de8580c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 2.780829] Object de8580d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [ 2.789430] Object de8580e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 73 b0 ea 9f kkkkkkkkkkkks... [ 2.798030] Object de8580f8: e8 18 80 d6 56 38 44 c0 db e3 4f 71 f7 ce d1 d3 ....V8D...Oq.... [ 2.806629] Redzone de858108: f8 bd 3e 4f ..>O [ 2.814279] Padding de8581b0: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ [ 2.822283] CPU: 0 PID: 0 Comm: swapper Tainted: G B 4.9.50-g995be12679 #179 [ 2.831819] Call Trace: [ 2.834301] [dffefd20] [c01aa9a8] check_bytes_and_report+0x100/0x194 (unreliable) [ 2.841801] [dffefd50] [c01aac3c] check_object+0x200/0x530 [ 2.847306] [dffefd80] [c01ae584] free_debug_processing+0x290/0x690 [ 2.853585] [dffefde0] [c01aec8c] __slab_free+0x308/0x628 [ 2.859000] [dffefe80] [c05057f4] ipsec_esp_encrypt_done+0x130/0x240 [ 2.865378] [dffefeb0] [c05002c4] flush_channel+0x1dc/0x488 [ 2.870968] [dffeff10] [c05007a8] talitos2_done_4ch+0x30/0x200 [ 2.876814] [dffeff30] [c002fe38] tasklet_action+0xa0/0x13c [ 2.882399] [dffeff60] [c002f118] __do_softirq+0x148/0x6cc [ 2.887896] [dffeffd0] [c002f954] irq_exit+0xc0/0x124 [ 2.892968] [dffefff0] [c0013adc] call_do_irq+0x24/0x3c [ 2.898213] [c0d4be00] [c000757c] do_IRQ+0x78/0x108 [ 2.903113] [c0d4be30] [c0015c08] ret_from_except+0x0/0x14 [ 2.908634] --- interrupt: 501 at finish_task_switch+0x70/0x350 [ 2.908634] LR = finish_task_switch+0x58/0x350 [ 2.919327] [c0d4bf20] [c085e1d4] schedule+0x80/0x134 [ 2.924398] [c0d4bf50] [c085e2c0] schedule_preempt_disabled+0x38/0xc8 [ 2.930853] [c0d4bf60] [c007f064] cpu_startup_entry+0xe4/0x190 [ 2.936707] [c0d4bfb0] [c096c434] start_kernel+0x3f4/0x408 [ 2.942198] [c0d4bff0] [00003438] 0x3438 [ 2.946137] FIX dma-kmalloc-256: Restoring 0xde858108-0xde85810b=0xcc [ 2.946137] [ 2.954158] FIX dma-kmalloc-256: Object at 0xde858008 not freed This patch reworks the handling of the CICV out in order to properly handle all cases. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
LEROY Christophe authored
AEAD tests fail when destination SG list has more than 1 element. [ 2.058752] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos [ 2.066965] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67 00000010: c0 43 ff 74 c0 43 ff e0 de 83 d1 20 de 84 8e 54 00000020: de 83 d7 c4 [ 2.082138] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos [ 2.090435] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67 00000010: de 84 ea 58 c0 93 1a 24 de 84 e8 59 de 84 f1 20 00000020: 00 00 00 00 [ 2.105721] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos [ 2.114259] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79 00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30 00000090: c0 99 74 3c [ 2.166410] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos [ 2.174794] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79 00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30 00000090: c0 99 74 3c [ 2.226486] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos) [ 2.236459] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos) [ 2.247196] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos [ 2.255555] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79 00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30 00000090: c0 99 74 3c c0 96 e5 b8 [ 2.309004] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos [ 2.317562] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79 00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30 00000090: c0 99 74 3c c0 96 e5 b8 [ 2.370710] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos [ 2.379177] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 [ 2.397863] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos [ 2.406134] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 [ 2.424789] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos [ 2.433491] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79 00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30 00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc [ 2.488832] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos [ 2.497387] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74 00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65 00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79 00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30 00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc This patch fixes that. Signed-off-by:
-
Christian Lamparter authored
This patch adds aes-gcm support to crypto4xx. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christian Lamparter authored
This patch adds aes-ccm support. Signed-off-by:
-
Christian Lamparter authored
This patch enhances existing interfaces and functions to support AEAD ciphers in the next patches. Signed-off-by:
-
Christian Lamparter authored
Thanks to the big overhaul of crypto4xx_build_pd(), the request-local sa_in, sa_out and state_record allocation can be simplified. There's no need to setup any dma coherent memory anymore and much of the support code can be removed. Signed-off-by:
-
Christian Lamparter authored
If the crypto4xx device is continuously loaded by dm-crypt and ipsec work, it will start to work intermittent after a few (between 20-30) seconds, hurting throughput and latency. This patch contains various stability improvements in order to fix this issue. So far, the hardware has survived more than a day without suffering any stalls under the continuous load. Signed-off-by:
-
Christian Lamparter authored
crypto4xx_core.c:179:6: warning: symbol 'crypto4xx_free_state_record' was not declared. Should it be static? crypto4xx_core.c:331:5: warning: symbol 'crypto4xx_get_n_gd' was not declared. Should it be static? crypto4xx_core.c:652:6: warning: symbol 'crypto4xx_return_pd' was not declared. Should it be static? crypto4xx_return_pd() is not used by anything. Therefore it is removed. Signed-off-by:
-
Christian Lamparter authored
This patch overhauls and fixes code related to crypto4xx_build_pd() * crypto4xx_build_pd() did not handle chained source scatterlist. This is fixed by replacing the buggy indexed-access of &src[idx] with sg_next() in the gather array setup loop. * The redundant is_hash, direction, save_iv and pd_ctl members in the crypto4xx_ctx struct have been removed. - is_hash can be derived from the crypto_async_request parameter. - direction is already part of the security association's bf.dir bitfield. - save_iv is unused. - pd_ctl always had the host_ready bit enabled anyway. (the hash_final case is rather pointless, since the ahash code has been deactivated). * make crypto4xx_build_pd()'s caller responsible for converting the IV to the LE32 format. * change crypto4xx_ahash_update() and crypto4xx_ahash_digest() to initialize a temporary destination scatterlist. This allows the removal of an ugly cast of req->result (which is a pointer to an u8-array) to a scatterlist pointer. * change crypto4xx_build_pd() return type to int. After all it returns -EINPROGRESS/-EBUSY. * fix crypto4xx_build_pd() thread-unsafe sa handling. Signed-off-by: -
Christian Lamparter authored
The hardware expects that the keys, IVs (and inner/outer hashes) are in the le32 format. This patch changes all hardware interface declarations to use the correct LE32 data format for each field. In order to pass __CHECK_ENDIAN__ checks, crypto4xx_memcpy_le has to be honest about the endianness of its parameters. The function was split and moved to the common crypto4xx_core.h header. This allows the compiler to generate better code if the sizes/len is a constant (various *_IV_LEN). Please note that the hardware isn't consistent with the endiannes of the save_digest field in the state record struct though. The hashes produced by GHASH and CBC (for CCM) will be in LE32. Whereas md5 and sha{1/,256,...} do not need any conversion. Signed-off-by: -
Christian Lamparter authored
Previously, If the crypto4xx driver used all available security contexts, it would simply refuse new requests with -EAGAIN. CRYPTO_TFM_REQ_MAY_BACKLOG was ignored. in case of dm-crypt.c's crypt_convert() function this was causing the following errors to manifest, if the system was pushed hard enough: | EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino .. | EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino .. | EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino .. | JBD2: Detected IO errors while flushing file data on dm-1-8 | Aborting journal on device dm-1-8. | EXT4-fs error : ext4_journal_check_start:56: Detected aborted journal | EXT4-fs (dm-1): Remounting filesystem read-only | EXT4-fs : ext4_writepages: jbd2_start: 2048 pages, inode 498...; err -30 (This did cause corruptions due to failed writes) To fix this mess, the crypto4xx driver needs to notifiy the user to slow down. This can be achieved by returning -EBUSY on requests, once the crypto hardware was falling behind. Note: -EBUSY has two different meanings. Setting the flag CRYPTO_TFM_REQ_MAY_BACKLOG implies that the request was successfully queued, by the crypto driver. To achieve this requirement, the implementation introduces a threshold check and adds logic to the completion routines in much the same way as AMD's Cryptographic Coprocessor (CCP) driver do. Note2: Tests showed that dm-crypt starved ipsec traffic. Under load, ipsec links dropped to 0 Kbits/s. This is because dm-crypt's callback would instantly queue the next request. In order to not starve ipsec, the driver reserves a small portion of the available crypto contexts for this purpose. Signed-off-by:
-
Christian Lamparter authored
If crypto4xx is used in conjunction with dm-crypt, the available ring buffer elements are not enough to handle the load properly. On an aes-cbc-essiv:sha256 encrypted swap partition the read performance is abyssal: (tested with hdparm -t) /dev/mapper/swap_crypt: Timing buffered disk reads: 14 MB in 3.68 seconds = 3.81 MB/sec The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256. This improves the performance considerably: /dev/mapper/swap_crypt: Timing buffered disk reads: 104 MB in 3.03 seconds = 34.31 MB/sec Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD can be easily calculated from their respective PPC4XX_NUM_* constant. Signed-off-by:
-
Christian Lamparter authored
This patch fixes a type mismatch error that I accidentally introduced when I moved and refactored the dynamic_contents helpers. Signed-off-by:
-
Christian Lamparter authored
I used aes-cbc as a template for ofb. But sadly I forgot to update set_key method to crypto4xx_setkey_aes_ofb(). this was caught by the testmgr: alg: skcipher: Test 1 failed (invalid result) on encr. for ofb-aes-ppc4xx 00000000: 76 49 ab ac 81 19 b2 46 ce e9 8e 9b 12 e9 19 7d 00000010: 50 86 cb 9b 50 72 19 ee 95 db 11 3a 91 76 78 b2 00000020: 73 be d6 b8 e3 c1 74 3b 71 16 e6 9e 22 22 95 16 00000030: 3f f1 ca a1 68 1f ac 09 12 0e ca 30 75 86 e1 a7 With the correct set_key method, the aes-ofb cipher passes the test. name : ofb(aes) driver : ofb-aes-ppc4xx module : crypto4xx priority : 300 refcnt : 1 selftest : passed internal : no type : ablkcipher async : yes blocksize : 16 min keysize : 16 max keysize : 32 ivsize : 16 geniv : <default> Signed-off-by:
-
Christian Lamparter authored
The hmac_mc parameter of set_dynamic_sa_command_1() was defined but not used. On closer inspection it turns out, it was never wired up. Signed-off-by:
-
Stephan Mueller authored
The code is simplified by using two __be64 values for the operation instead of using two arrays of u8. This allows to get rid of the memory alignment code. In addition, the crypto_xor can be replaced with a native XOR operation. Finally, the definition of the variables is re-arranged such that the data structures come before simple variables to potentially reduce memory space. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Tudor-Dan Ambarus authored
DH_KPP_SECRET_MIN_SIZE and dh_data_size() are both returning unsigned values. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
p->key_size, p->p_size, p->g_size are all of unsigned int type. Signed-off-by:
-
Tudor-Dan Ambarus authored
ECDH_KPP_SECRET_MIN_SIZE and params->key_size are both returning unsigned values. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Arvind Yadav authored
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by:
-
Christophe Jaillet authored
If the cipher name does not start with 'ecb(' we should bail out, as done in the 'create()' function in 'crypto/xts.c'. Fixes: 700cb3f5 ("crypto: lrw - Convert to skcipher") Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe Jaillet authored
All error handling paths 'goto err_drop_spawn' except this one. In order to avoid some resources leak, we should do it as well here. Fixes: 700cb3f5 ("crypto: lrw - Convert to skcipher") Signed-off-by:
-
- 07 Oct, 2017 11 commits
-
-
Corentin LABBE authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Corentin LABBE authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
-
Corentin LABBE authored
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by:
-
Colin Ian King authored
The variable len is set to zero, never read and then later updated to p - name, so clearly the zero'ing of len is redundant and can be removed. Detected by clang scan-build: " warning: Value stored to 'len' is never read" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Allen authored
Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Signed-off-by:
-
Mathias Krause authored
If the algorithm we're parallelizing is asynchronous we might change CPUs between padata_do_parallel() and padata_do_serial(). However, we don't expect this to happen as we need to enqueue the padata object into the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel queue. Ensure we're not switching CPUs for a given padata object by tracking the CPU within the padata object. If the serial callback gets called on the wrong CPU, defer invoking padata_reorder() via a kernel worker on the CPU we're expected to run on. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Mathias Krause authored
The reorder timer function runs on the CPU where the timer interrupt was handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask set. Ensure the padata_reorder() callback runs on the correct CPU, which is one in the 'pcpu' CPU mask set and, preferrably, the next expected one. Do so by comparing the current CPU with the expected target CPU. If they match, call padata_reorder() right away. If they differ, schedule a work item on the target CPU that does the padata_reorder() call for us. Signed-off-by:
-
Mathias Krause authored
The parallel queue per-cpu data structure gets initialized only for CPUs in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer may run on a different CPU and might wrongly decide it's the target CPU for the next reorder item as per-cpu memory gets memset(0) and we might be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0. Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index' compare in padata_get_next() fail in this case by initializing the cpu_index member of all per-cpu parallel queues. Use -1 for unused ones. Signed-off-by:
-
Mikulas Patocka authored
In 32-bit mode, the x86 architecture can hold full 32-bit pointers. Therefore, the code that copies the current address to the %ecx register and uses %ecx-relative addressing is useless, we could just use absolute addressing. The processors have a stack of return addresses for branch prediction. If we use a call instruction and pop the return address, it desynchronizes the return stack and causes branch prediction misses. This patch also moves the data to the .rodata section. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
amd authored
Use the provided mechanism in dmaengine.h to invoke the completion callback. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
amd authored
Clean up the mapped pages and the unmap object once we are done with it. This enables the final clean-up of the object once the transfer is complete. Signed-off-by:
-
- 22 Sep, 2017 2 commits
-
-
raveendra padasalagi authored
Add support to explicity ACK mailbox message because after sending message we can know the send status via error attribute of brcm_message. This is needed to support "txdone_ack" supported in mailbox controller driver. Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by:
Anup Patel <anup.patel@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Geliang Tang authored
Fix checkpatch.pl warnings: WARNING: void function return statements are not generally useful FILE: crypto/rmd128.c:218: FILE: crypto/rmd160.c:261: FILE: crypto/rmd256.c:233: FILE: crypto/rmd320.c:280: FILE: crypto/tcrypt.c:385: FILE: drivers/crypto/ixp4xx_crypto.c:538: FILE: drivers/crypto/marvell/cesa.c:81: FILE: drivers/crypto/ux500/cryp/cryp_core.c:1755: Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
