In tas5805m_refresh, we switch pages to update the DSP volume control,
but we need to switch back to page 0 before trying to alter the
soft-mute control. This latter page-switch was missing.

Fixes: ec452684 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/1fea38a71ea6ab0225d19ab28d1fa12828d762d0.1675497326.git.daniel.beer@igorinstitute.comSigned-off-by: Mark Brown <broonie@kernel.org>

There's some setup we need to do in order to get the DSP initialized,
and this can't be done until a bit-clock is ready. In an earlier version
of this driver, this work was done in a DAPM callback.

The DAPM callback doesn't guarantee that the bit-clock is running, so
the work was moved instead to the trigger callback. Unfortunately this
callback runs in atomic context, and the setup code needs to do I2C
transactions.

Here we use a work_struct to kick off the setup in a thread instead.

Fixes: ec452684 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/85d8ba405cb009a7a3249b556dc8f3bdb1754fdf.1675497326.git.daniel.beer@igorinstitute.comSigned-off-by: Mark Brown <broonie@kernel.org>

As interrupts are Level-triggered,unless and until we deassert the register
the interrupts are generated which causes spurious interrupts unhandled.

Now we deasserted the interrupt at top half which solved the below
"nobody cared" warning.

warning reported in dmesg:
	irq 80: nobody cared (try booting with the "irqpoll" option)
	CPU: 5 PID: 2735 Comm: irq/80-AudioDSP
		Not tainted 5.15.86-15817-g4c19f3e06d49 #1 1bd3fd932cf58caacc95b0504d6ea1e3eab22289
	Hardware name: Google Skyrim/Skyrim, BIOS Google_Skyrim.15303.0.0 01/03/2023
	Call Trace:
	<IRQ>
	dump_stack_lvl+0x69/0x97
	 __report_bad_irq+0x3a/0xae
	note_interrupt+0x1a9/0x1e3
	handle_irq_event_percpu+0x4b/0x6e
	handle_irq_event+0x36/0x5b
	handle_fasteoi_irq+0xae/0x171
	 __common_interrupt+0x48/0xc4
	</IRQ>

	handlers:
	acp_irq_handler [snd_sof_amd_acp] threaded [<000000007e089f34>] acp_irq_thread [snd_sof_amd_acp]
	Disabling IRQ #80
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20230203123254.1898794-1-Vsujithkumar.Reddy@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Modify clock_stop_timeout value for rt715-sdca according to
the requirement of internal clock trimming.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/574b6586267a458cac78c5ac4d5b10bd@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

While looking through legacy platform data users, I noticed that
the DT probing never uses data from the DT properties, as the
platform_data structure gets overwritten directly after it
is initialized.

There have never been any boards defining the platform_data in
the mainline kernel either, so this driver so far only worked
with patched kernels or with the default values.

For the benefit of possible downstream users, fix the DT probe
by no longer overwriting the data.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230126162203.2986339-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Correct reversed values used in min/max rates, leading to incorrect
playback constraints.

Cc: <stable@vger.kernel.org>
Fixes: 43b8c7dc ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124123049.285395-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This model requires an additional detection quirk to enable the
internal microphone - BIOS doesn't seem to support AcpDmicConnected
(nothing in acpidump output).
Signed-off-by: fengwk <fengwk94@gmail.com>
Link: https://lore.kernel.org/r/Y8wmCutc74j/tyHP@archSigned-off-by: Mark Brown <broonie@kernel.org>

If the swidget is NULL we skip the preparing of the widget and jump to
handle the sink path of the widget.
If the prepare fails in this case we would undo the prepare but the swidget
is NULL (we skipped the prepare for the widget).

To avoid NULL pointer dereference in this case we must check swidget
against NULL pointer once again.

Fixes: 0ad84b11 ("ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230120102125.30653-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

This series addresses problems with echo reference devices
reported in:
"[BUG][ADL-N] Kernel panic when echo reference stream is opened"
https://github.com/thesofproject/linux/issues/4083

commit f77a066f ("ASoC: hdmi-codec: Allow playback and capture
to be disabled") added new no_i2s_playback/capture.
We need to zero clear HDMI pdata first, otherwise unexpected flag
will be added.

Fixes: f77a066f ("ASoC: hdmi-codec: Allow playback and capture to be disabled")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k01hlnqj.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "id" comes from the user.  Change the type to unsigned to prevent
an array underflow.

Fixes: f4ea22f7 ("ASoC: SOF: ipc4: Add support for mtrace log extraction")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/Y8laruWOEwOC/dx9@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.

To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.

Link: https://github.com/thesofproject/linux/issues/4083Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230119163459.2235843-5-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.

To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.

Link: https://github.com/thesofproject/linux/issues/4083Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230119163459.2235843-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.

To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.

Link: https://github.com/thesofproject/linux/issues/4083Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230119163459.2235843-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.

To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.

Link: https://github.com/thesofproject/linux/issues/4083Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230119163459.2235843-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

This series contains one fix (first patch) followed by a nice to have safety
belts in case we get a widget from topology which is not handled by SOF and will
not have corresponding swidget associated with.

The existing code return when a widget doesn't need to
prepare/unprepare. This will prevent widgets in the sink path from being
prepared/unprepared.

Cc: <stable@vger.kernel.org> # 6.1
Link: https://github.com/thesofproject/linux/issues/4021Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Skip preparing/unpreparing widgets if the swidget pointer is NULL. This
will be true in the case of virtual widgets in topology that were added
for reusing the legacy HDA machine driver with SOF.

Fixes: 9862dcf7 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We should unprepare the widget if its use_count = 1.

Fixes: 9862dcf7 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

If there is a connection between a playback stream and a capture stream,
all widgets that are connected to the playback stream and the capture
stream will be in the list.
So, we have to start with the exactly right widget type.
snd_soc_dapm_aif_out is for capture stream and a playback stream should
start with a snd_soc_dapm_aif_in widget.
Contrarily, snd_soc_dapm_dai_in is for playback stream, and a capture
stream should start with a snd_soc_dapm_dai_out widget.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230117123534.2075-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

On shutdown reference to i915 driver needs to be released to not spam
logs with unnecessary warnings. While at it do some additional cleanup
to make sure DSP is powered down and interrupts from device are
disabled.

Fixes: 1affc44e ("ASoC: Intel: avs: PCI driver implementation")
Reported-by: Kornel Dulęba <korneld@google.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230113190310.1451693-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.

While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().

Fixes: a164137c ("ASoC: Intel: add machine driver for SOF+ES8336")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230112112852.67714-6-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.

While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().

Fixes: 9a87fc1e ("ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230112112852.67714-5-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.

While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().

Fixes: a232b96d ("ASoC: Intel: bytcr_rt5640: use HID translation util")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230112112852.67714-4-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.

While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().

Fixes: 02c0a3b3 ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230112112852.67714-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.

While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().

Fixes: 3c22a73f ("ASoC: Intel: bytcht_es8316: fix HID handling")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230112112852.67714-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.

While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().

Fixes: 02527c3f ("ASoC: amd: add Machine driver for Jadeite platform")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230112112356.67643-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adding DMI entries to support new acer/emdoor platforms.
Suggested-by: shanshengwang <shansheng.wang@amd.com>
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230111102130.2276391-1-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

The fsl-asoc-card AC'97 support currently tries to route to Playback and
Capture widgets provided by the AC'97 CODEC. This doesn't work since the
generic AC'97 driver registers with an "AC97" at the front of the stream
and hence widget names, update to reflect reality. It's not clear to me
if or how this ever worked.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-2-a5d7469d4f67@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback"
and "AC97 Capture" respectively. This is the same name used by the generic
AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card
when it attempts to use these widgets in routing. Add a "CPU" in the name
like the regular DAIs registered by the driver to disambiguate.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-1-a5d7469d4f67@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

On SC7280 ADSP bypassed platform, there are only three clocks for TX
macro.  This is already reflected in "clock-names" but not in "clocks"
property:

  sc7280-herobrine-zombie-lte.dtb: codec@3220000: clocks: [[219, 8], [219, 7], [220]] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221225115907.55250-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

SM8250 DTS uses additional "va" clock in WSA macro device node:

  sm8250-sony-xperia-edo-pdx203.dtb: codec@3240000: clock-names: ['mclk', 'npl', 'macro', 'dcodec', 'va', 'fsgen'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221225115907.55250-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Older Qualcomm platforms like APQ8016 do not have hardware support for
SoundWire, so kernel configurations made specifically for those platforms
will usually not have CONFIG_SOUNDWIRE enabled.

Unfortunately commit 8d89cf6f ("ASoC: qcom: cleanup and fix
dependency of QCOM_COMMON") breaks those kernel configurations, because
SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.

The soundwire helpers in common.c are only used by two of the Qualcomm
audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for
all platforms is unnecessary.

There is no need to stuff all common code into a single module. Fix the
issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW
module/option that is selected only by the machine drivers that make
use of them. This also allows reverting the imply/depends changes from
the previous fix because both SM8250 and SC8280XP already depend on
SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE
is really enabled.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 8d89cf6f ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231115506.82991-1-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230104025754.3019235-1-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.

This fixes commit 4ff028f6 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.

Fixes: 4ff028f6 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from tongjian <tongjian@huaqin.corp-partner.google.com>:

Add MAX98360A for RT5682S, MAX98360A works same as rt1019. So, it can
be supported.

Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.

Fixes: a91eb199 ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.itSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Mars Chen <chenxiangrui@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20221228103812.450956-1-chenxiangrui@huaqin.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

ASUS VivoBook 13 OLED (M5402RA) needs this quirk to get the built-in microphone working properly.
Signed-off-by: Aniol Martí <aniol@aniolmarti.cat>
Link: https://lore.kernel.org/r/20221227224932.9771-1-aniol@aniolmarti.catSigned-off-by: Mark Brown <broonie@kernel.org>

RT9120 uses PM runtime autosuspend to decrease the frequently on/off
spent time. This exists one case, when pcm is closed and dev PM is
waiting for autosuspend time expired to enter runtime suspend state.
At the mean time, system is going to enter suspend, dev PM runtime
suspend won't be called. It makes the rt9120 suspend consumption
current not as expected.

This patch can fix the rt9120 dev PM issue during runtime autosuspend
and system suspend by binding dev PM runtime and ASoC component PM.

Fixes: 80b949f3 ("ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1672301033-3675-1-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>