- 04 Nov, 2014 7 commits
-
-
Peter Zijlstra authored
In some cases this can trigger a true flood of output. Requested-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
rtnl_lock_unregistering*() take rtnl_lock() -- a mutex -- inside a wait loop. The wait loop relies on current->state to function, but so does mutex_lock(), nesting them makes for the inner to destroy the outer state. Fix this using the new wait_woken() bits. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <cwang@twopensource.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jerry Chu <hkchu@google.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> Cc: stephen hemminger <stephen@networkplumber.org> Cc: Tom Gundersen <teg@jklm.no> Cc: Tom Herbert <therbert@google.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/20141029173110.GE15602@worktop.programming.kicks-ass.netSigned-off-by:
-
Peter Zijlstra authored
rfcomm_run() is a tad broken in that is has a nested wait loop. One cannot rely on p->state for the outer wait because the inner wait will overwrite it. Fix this using the new wait_woken() facility. Signed-off-by:
-
Peter Zijlstra authored
The kauditd_thread wait loop is a bit iffy; it has a number of problems: - calls try_to_freeze() before schedule(); you typically want the thread to re-evaluate the sleep condition when unfreezing, also freeze_task() issues a wakeup. - it unconditionally does the {add,remove}_wait_queue(), even when the sleep condition is false. Use wait_event_freezable() that does the right thing. Reported-by:Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
-
Peter Zijlstra (Intel) authored
There is no user.. make it go away. Signed-off-by:
-
Peter Zijlstra authored
Provide better implementations of wait_event_freezable() APIs. The problem is with freezer_do_not_count(), it hides the thread from the freezer, even though this thread might not actually freeze/sleep at all. Cc: oleg@redhat.com Cc: Rafael Wysocki <rjw@rjwysocki.net> Signed-off-by:
-
Peter Zijlstra authored
There is a race between kthread_stop() and the new wait_woken() that can result in a lack of progress. CPU 0 | CPU 1 | rfcomm_run() | kthread_stop() ... | if (!test_bit(KTHREAD_SHOULD_STOP)) | | set_bit(KTHREAD_SHOULD_STOP) | wake_up_process() wait_woken() | wait_for_completion() set_current_state(INTERRUPTIBLE) | if (!WQ_FLAG_WOKEN) | schedule_timeout() | | After which both tasks will wait.. forever. Fix this by having wait_woken() check for kthread_should_stop() but only for kthreads (obviously). Signed-off-by:
-
- 28 Oct, 2014 33 commits
-
-
Peter Zijlstra authored
cond_resched() is a preemption point, not strictly a blocking primitive, so exclude it from the ->state test. In particular, preemption preserves task_struct::state. Signed-off-by:
-
Peter Zijlstra authored
Validate we call might_sleep() with TASK_RUNNING, which catches places where we nest blocking primitives, eg. mutex usage in a wait loop. Since all blocking is arranged through task_struct::state, nesting this will cause the inner primitive to set TASK_RUNNING and the outer will thus not block. Another observed problem is calling a blocking function from schedule()->sched_submit_work()->blk_schedule_flush_plug() which will then destroy the task state for the actual __schedule() call that comes after it. Signed-off-by:
-
Peter Zijlstra authored
WARNING: CPU: 1 PID: 1744 at kernel/sched/core.c:7104 __might_sleep+0x58/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff81070e10>] prepare_to_wait+0x50 /0xa0 [<ffffffff8105bc38>] __might_sleep+0x58/0x90 [<ffffffff8148c671>] lock_sock_nested+0x31/0xb0 [<ffffffff81498aaa>] sk_stream_wait_memory+0x18a/0x2d0 Which is a false positive because sk_wait_event() will already have TASK_RUNNING at that point if it would've gone through schedule_timeout(). So annotate with sched_annotate_sleep(); which goes away on !DEBUG builds. Reported-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by:
-
Peter Zijlstra authored
This is a genuine bug in add_unformed_module(), we cannot use blocking primitives inside a wait loop. So rewrite the wait_event_interruptible() usage to use the fresh wait_woken() stuff. Reported-by:
-
Peter Zijlstra authored
smp_hotplug_thread::{setup,unpark} functions can sleep too, so be consistent and do the same for all callbacks. __might_sleep+0x74/0x80 kmem_cache_alloc_trace+0x4e/0x1c0 perf_event_alloc+0x55/0x450 perf_event_create_kernel_counter+0x2f/0x100 watchdog_nmi_enable+0x8d/0x160 watchdog_enable+0x45/0x90 smpboot_thread_fn+0xec/0x2b0 kthread+0xe4/0x100 ret_from_fork+0x7c/0xb0 Signed-off-by: -
Peter Zijlstra authored
n_tty_{read,write} are wait loops with sleeps in. Wait loops rely on task_struct::state and sleeps do too, since that's the only means of actually sleeping. Therefore the nested sleeps destroy the wait loop state. Fix this by using the new woken_wake_function and wait_woken() stuff, which registers wakeups in wait and thereby allows shrinking the task_state::state changes to the actual sleep part. Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tglx@linutronix.de Cc: ilya.dryomov@inktank.com Cc: umgwanakikbuti@gmail.com Cc: oleg@redhat.com Link: http://lkml.kernel.org/r/20140924082242.323011233@infradead.orgSigned-off-by:
-
Peter Zijlstra authored
inotify_read is a wait loop with sleeps in. Wait loops rely on task_struct::state and sleeps do too, since that's the only means of actually sleeping. Therefore the nested sleeps destroy the wait loop state and the wait loop breaks the sleep functions that assume TASK_RUNNING (mutex_lock). Fix this by using the new woken_wake_function and wait_woken() stuff, which registers wakeups in wait and thereby allows shrinking the task_state::state changes to the actual sleep part. Signed-off-by:
-
Peter Zijlstra authored
do_wait() is a big wait loop, but we set TASK_RUNNING too late; we end up calling potential sleeps before we reset it. Not strictly a bug since we're guaranteed to exit the loop and not call schedule(); put in annotations to quiet might_sleep(). WARNING: CPU: 0 PID: 1 at ../kernel/sched/core.c:7123 __might_sleep+0x7e/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8109a788>] do_wait+0x88/0x270 Call Trace: [<ffffffff81694991>] dump_stack+0x4e/0x7a [<ffffffff8109877c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff8109886c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff810bca6e>] __might_sleep+0x7e/0x90 [<ffffffff811a1c15>] might_fault+0x55/0xb0 [<ffffffff8109a3fb>] wait_consider_task+0x90b/0xc10 [<ffffffff8109a804>] do_wait+0x104/0x270 [<ffffffff8109b837>] SyS_wait4+0x77/0x100 [<ffffffff8169d692>] system_call_fastpath+0x16/0x1b Signed-off-by:
-
Peter Zijlstra authored
Add more might_sleep() checks, suppose someone put a wait_event() like thing in a wait loop.. Can't put might_sleep() in ___wait_event() because there's the locked primitives which call ___wait_event() with locks held. Signed-off-by:
-
Peter Zijlstra authored
There are a few places that call blocking primitives from wait loops, provide infrastructure to support this without the typical task_struct::state collision. We record the wakeup in wait_queue_t::flags which leaves task_struct::state free to be used by others. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: tglx@linutronix.de Cc: ilya.dryomov@inktank.com Cc: umgwanakikbuti@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140924082242.051202318@infradead.orgSigned-off-by:
-
Peter Zijlstra authored
We're going to make might_sleep() test for TASK_RUNNING, because blocking without TASK_RUNNING will destroy the task state by setting it to TASK_RUNNING. There are a few occasions where its 'valid' to call blocking primitives (and mutex_lock in particular) and not have TASK_RUNNING, typically such cases are right before we set TASK_RUNNING anyhow. Robustify the code by not assuming this; this has the beneficial side effect of allowing optional code emission for fixing the above might_sleep() false positives. Signed-off-by:
-
Wanpeng Li authored
Use nr_cpus_allowed to bail from select_task_rq() when only one cpu can be used, and saves some cycles for pinned tasks. Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
-
Wanpeng Li authored
There is no need to do balance during fork since SCHED_DEADLINE tasks can't fork. This patch avoid the SD_BALANCE_FORK check. Signed-off-by:
-
Juri Lelli authored
How we deal with updates to exclusive cpusets is currently broken. As an example, suppose we have an exclusive cpuset composed of two cpus: A[cpu0,cpu1]. We can assign SCHED_DEADLINE task to it up to the allowed bandwidth. If we want now to modify cpusetA's cpumask, we have to check that removing a cpu's amount of bandwidth doesn't break AC guarantees. This thing isn't checked in the current code. This patch fixes the problem above, denying an update if the new cpumask won't have enough bandwidth for SCHED_DEADLINE tasks that are currently active. Signed-off-by:
Juri Lelli <juri.lelli@arm.com> Signed-off-by:
-
Juri Lelli authored
Exclusive cpusets are the only way users can restrict SCHED_DEADLINE tasks affinity (performing what is commonly called clustered scheduling). Unfortunately, such thing is currently broken for two reasons: - No check is performed when the user tries to attach a task to an exlusive cpuset (recall that exclusive cpusets have an associated maximum allowed bandwidth). - Bandwidths of source and destination cpusets are not correctly updated after a task is migrated between them. This patch fixes both things at once, as they are opposite faces of the same coin. The check is performed in cpuset_can_attach(), as there aren't any points of failure after that function. The updated is split in two halves. We first reserve bandwidth in the destination cpuset, after we pass the check in cpuset_can_attach(). And we then release bandwidth from the source cpuset when the task's affinity is actually changed. Even if there can be time windows when sched_setattr() may erroneously fail in the source cpuset, we are fine with it, as we can't perfom an atomic update of both cpusets at once. Reported-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Reported-by:
Vincent Legout <vincent@legout.info> Signed-off-by:
-
Wanpeng Li authored
As Kirill mentioned (https://lkml.org/lkml/2013/1/29/118): | If rq has already had 2 or more pushable tasks and we try to add a | pinned task then call of push_rt_task will just waste a time. Just switched pinned task is not able to be pushed. If the rq has had several dl tasks before they have already been considered as candidates to be pushed (or pulled). This patch implements the same behavior as rt class which introduced by commit 10447917 ("sched/rt: Do not try to push tasks if pinned task switches to RT"). Suggested-by:
Kirill V Tkhai <tkhai@yandex.ru> Acked-by:
-
Oleg Nesterov authored
task_preempt_count() is pointless if preemption counter is per-cpu, currently this is x86 only. It is only valid if the task is not running, and even in this case the only info it can provide is the state of PREEMPT_ACTIVE bit. Change its single caller to check p->on_rq instead, this should be the same if p->state != TASK_RUNNING, and kill this helper. Signed-off-by:
-
Oleg Nesterov authored
Both callers of finish_task_switch() need to recalculate this_rq() and pass it as an argument, plus __schedule() does this again after context_switch(). It would be simpler to call this_rq() once in finish_task_switch() and return the this rq to the callers. Note: probably "int cpu" in __schedule() should die; it is not used and both rcu_note_context_switch() and wq_worker_sleeping() do not really need this argument. Signed-off-by:
-
Oleg Nesterov authored
finish_task_switch() enables preemption, so post_schedule(rq) can be called on the wrong (and even dead) CPU. Afaics, nothing really bad can happen, but in this case we can wrongly clear rq->post_schedule on that CPU. And this simply looks wrong in any case. Signed-off-by:
-
Oleg Nesterov authored
task_preempt_count() has nothing to do with the actual preempt counter, thread_info->saved_preempt_count is only valid right after switch_to(). __trace_sched_switch_state() can use preempt_count(), prev is still the current task when trace_sched_switch() is called. Signed-off-by:
-
Rik van Riel authored
In pseudo-interleaved numa_groups, all tasks try to relocate to the group's preferred_nid. When a group is spread across multiple NUMA nodes, this can lead to tasks swapping their location with other tasks inside the same group, instead of swapping location with tasks from other NUMA groups. This can keep NUMA groups from converging. Examining all nodes, when dealing with a task in a pseudo-interleaved NUMA group, avoids this problem. Note that only CPUs in nodes that improve the task or group score are examined, so the loop isn't too bad. Tested-by:
Vinod Chegu <chegu_vinod@hp.com> Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Rik van Riel authored
On systems with complex NUMA topologies, the node scoring is adjusted to allow workloads to converge on nodes that are near each other. The way a task group's preferred nid is determined needs to be adjusted, in order for the preferred_nid to be consistent with group_weight scoring. This ensures that we actually try to converge workloads on adjacent nodes. Signed-off-by:
-
Rik van Riel authored
In order to do task placement on systems with complex NUMA topologies, it is necessary to count the faults on nodes nearby the node that is being examined for a potential move. In case of a system with a backplane interconnect, we are dealing with groups of NUMA nodes; each of the nodes within a group is the same number of hops away from nodes in other groups in the system. Optimal placement on this topology is achieved by counting all nearby nodes equally. When comparing nodes A and B at distance N, nearby nodes are those at distances smaller than N from nodes A or B. Placement strategy on a system with a glueless mesh NUMA topology needs to be different, because there are no natural groups of nodes determined by the hardware. Instead, when dealing with two nodes A and B at distance N, N >= 2, there will be intermediate nodes at distance < N from both nodes A and B. Good placement can be achieved by right shifting the faults on nearby nodes by the number of hops from the node being scored. In this context, a nearby node is any node less than the maximum distance in the system away from the node. Those nodes are skipped for efficiency reasons, there is no real policy reason to do so. Placement policy on directly connected NUMA systems is not affected. Signed-off-by:
-
Rik van Riel authored
Preparatory patch for adding NUMA placement on systems with complex NUMA topology. Also fix a potential divide by zero in group_weight() Signed-off-by:
-
Rik van Riel authored
Smaller NUMA systems tend to have all NUMA nodes directly connected to each other. This includes the degenerate case of a system with just one node, ie. a non-NUMA system. Larger systems can have two kinds of NUMA topology, which affects how tasks and memory should be placed on the system. On glueless mesh systems, nodes that are not directly connected to each other will bounce traffic through intermediary nodes. Task groups can be run closer to each other by moving tasks from a node to an intermediary node between it and the task's preferred node. On NUMA systems with backplane controllers, the intermediary hops are incapable of running programs. This creates "islands" of nodes that are at an equal distance to anywhere else in the system. Each kind of topology requires a slightly different placement algorithm; this patch provides the mechanism to detect the kind of NUMA topology of a system. Signed-off-by:
-
Rik van Riel authored
Export some information that is necessary to do placement of tasks on systems with multi-level NUMA topologies. Signed-off-by:
-
Kirill Tkhai authored
1) switched_to_dl() check is wrong. We reschedule only if rq->curr is deadline task, and we do not reschedule if it's a lower priority task. But we must always preempt a task of other classes. 2) dl_task_timer(): Policy does not change in case of priority inheritance. rt_mutex_setprio() changes prio, while policy remains old. So we lose some balancing logic in dl_task_timer() and switched_to_dl() when we check policy instead of priority. Boosted task may be rq->curr. (I didn't change switched_from_dl() because no check is necessary there at all). I've looked at this place(switched_to_dl) several times and even fixed this function, but found just now... I suppose some performance tests may work better after this. Signed-off-by:
Kirill Tkhai <ktkhai@parallels.com> Signed-off-by:
-
Chen Hanxiao authored
Signed-off-by:
Chen Hanxiao <chenhanxiao@cn.fujitsu.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
-
Oleg Nesterov authored
preempt_schedule_context() does preempt_enable_notrace() at the end and this can call the same function again; exception_exit() is heavy and it is quite possible that need-resched is true again. 1. Change this code to dec preempt_count() and check need_resched() by hand. 2. As Linus suggested, we can use the PREEMPT_ACTIVE bit and avoid the enable/disable dance around __schedule(). But in this case we need to move into sched/core.c. 3. Cosmetic, but x86 forgets to declare this function. This doesn't really matter because it is only called by asm helpers, still it make sense to add the declaration into asm/preempt.h to match preempt_schedule(). Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Kirill Tkhai authored
File /proc/sys/kernel/numa_balancing_scan_size_mb allows writing of zero. This bash command reproduces problem: $ while :; do echo 0 > /proc/sys/kernel/numa_balancing_scan_size_mb; \ echo 256 > /proc/sys/kernel/numa_balancing_scan_size_mb; done divide error: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 24112 Comm: bash Not tainted 3.17.0+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88013c852600 ti: ffff880037a68000 task.ti: ffff880037a68000 RIP: 0010:[<ffffffff81074191>] [<ffffffff81074191>] task_scan_min+0x21/0x50 RSP: 0000:ffff880037a6bce0 EFLAGS: 00010246 RAX: 0000000000000a00 RBX: 00000000000003e8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013c852600 RBP: ffff880037a6bcf0 R08: 0000000000000001 R09: 0000000000015c90 R10: ffff880239bf6c00 R11: 0000000000000016 R12: 0000000000003fff R13: ffff88013c852600 R14: ffffea0008d1b000 R15: 0000000000000003 FS: 00007f12bb048700(0000) GS:ffff88007da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000001505678 CR3: 0000000234770000 CR4: 00000000000006f0 Stack: ffff88013c852600 0000000000003fff ffff880037a6bd18 ffffffff810741d1 ffff88013c852600 0000000000003fff 000000000002bfff ffff880037a6bda8 ffffffff81077ef7 ffffea0008a56d40 0000000000000001 0000000000000001 Call Trace: [<ffffffff810741d1>] task_scan_max+0x11/0x40 [<ffffffff81077ef7>] task_numa_fault+0x1f7/0xae0 [<ffffffff8115a896>] ? migrate_misplaced_page+0x276/0x300 [<ffffffff81134a4d>] handle_mm_fault+0x62d/0xba0 [<ffffffff8103e2f1>] __do_page_fault+0x191/0x510 [<ffffffff81030122>] ? native_smp_send_reschedule+0x42/0x60 [<ffffffff8106dc00>] ? check_preempt_curr+0x80/0xa0 [<ffffffff8107092c>] ? wake_up_new_task+0x11c/0x1a0 [<ffffffff8104887d>] ? do_fork+0x14d/0x340 [<ffffffff811799bb>] ? get_unused_fd_flags+0x2b/0x30 [<ffffffff811799df>] ? __fd_install+0x1f/0x60 [<ffffffff8103e67c>] do_page_fault+0xc/0x10 [<ffffffff8150d322>] page_fault+0x22/0x30 RIP [<ffffffff81074191>] task_scan_min+0x21/0x50 RSP <ffff880037a6bce0> ---[ end trace 9a826d16936c04de ]--- Also fix race in task_scan_min (it depends on compiler behaviour). Signed-off-by:
-
Yasuaki Ishimatsu authored
While offling node by hot removing memory, the following divide error occurs: divide error: 0000 [#1] SMP [...] Call Trace: [...] handle_mm_fault [...] ? try_to_wake_up [...] ? wake_up_state [...] __do_page_fault [...] ? do_futex [...] ? put_prev_entity [...] ? __switch_to [...] do_page_fault [...] page_fault [...] RIP [<ffffffff810a7081>] task_numa_fault RSP <ffff88084eb2bcb0> The issue occurs as follows: 1. When page fault occurs and page is allocated from node 1, task_struct->numa_faults_buffer_memory[] of node 1 is incremented and p->numa_faults_locality[] is also incremented as follows: o numa_faults_buffer_memory[] o numa_faults_locality[] NR_NUMA_HINT_FAULT_TYPES | 0 | 1 | ---------------------------------- ---------------------- node 0 | 0 | 0 | remote | 0 | node 1 | 0 | 1 | locale | 1 | ---------------------------------- ---------------------- 2. node 1 is offlined by hot removing memory. 3. When page fault occurs, fault_types[] is calculated by using p->numa_faults_buffer_memory[] of all online nodes in task_numa_placement(). But node 1 was offline by step 2. So the fault_types[] is calculated by using only p->numa_faults_buffer_memory[] of node 0. So both of fault_types[] are set to 0. 4. The values(0) of fault_types[] pass to update_task_scan_period(). 5. numa_faults_locality[1] is set to 1. So the following division is calculated. static void update_task_scan_period(struct task_struct *p, unsigned long shared, unsigned long private){ ... ratio = DIV_ROUND_UP(private * NUMA_PERIOD_SLOTS, (private + shared)); } 6. But both of private and shared are set to 0. So divide error occurs here. The divide error is rare case because the trigger is node offline. This patch always increments denominator for avoiding divide error. Signed-off-by:Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Kirill Tkhai authored
Unlocked access to dst_rq->curr in task_numa_compare() is racy. If curr task is exiting this may be a reason of use-after-free: task_numa_compare() do_exit() ... current->flags |= PF_EXITING; ... release_task() ... ~~delayed_put_task_struct()~~ ... schedule() rcu_read_lock() ... cur = ACCESS_ONCE(dst_rq->curr) ... ... rq->curr = next; ... context_switch() ... finish_task_switch() ... put_task_struct() ... __put_task_struct() ... free_task_struct() task_numa_assign() ... get_task_struct() ... As noted by Oleg: <<The lockless get_task_struct(tsk) is only safe if tsk == current and didn't pass exit_notify(), or if this tsk was found on a rcu protected list (say, for_each_process() or find_task_by_vpid()). IOW, it is only safe if release_task() was not called before we take rcu_read_lock(), in this case we can rely on the fact that delayed_put_pid() can not drop the (potentially) last reference until rcu_read_unlock(). And as Kirill pointed out task_numa_compare()->task_numa_assign() path does get_task_struct(dst_rq->curr) and this is not safe. The task_struct itself can't go away, but rcu_read_lock() can't save us from the final put_task_struct() in finish_task_switch(); this reference goes away without rcu gp>> The patch provides simple check of PF_EXITING flag. If it's not set, this guarantees that call_rcu() of delayed_put_task_struct() callback hasn't happened yet, so we can safely do get_task_struct() in task_numa_assign(). Locked dst_rq->lock protects from concurrency with the last schedule(). Reusing or unmapping of cur's memory may happen without it. Suggested-by: -
Juri Lelli authored
dl_task_timer() is racy against several paths. Daniel noticed that the replenishment timer may experience a race condition against an enqueue_dl_entity() called from rt_mutex_setprio(). With his own words: rt_mutex_setprio() resets p->dl.dl_throttled. So the pattern is: start_dl_timer() throttled = 1, rt_mutex_setprio() throlled = 0, sched_switch() -> enqueue_task(), dl_task_timer-> enqueue_task() throttled is 0 => BUG_ON(on_dl_rq(dl_se)) fires as the scheduling entity is already enqueued on the -deadline runqueue. As we do for the other races, we just bail out in the replenishment timer code. Reported-by:
-
