- 17 Aug, 2021 1 commit
-
-
Michael Ellerman authored
Replace "cat file | grep pattern" with "grep pattern file", and quote a few variables. Together that fixes all shellcheck errors. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210817125154.3369884-1-mpe@ellerman.id.au
-
- 16 Aug, 2021 2 commits
-
-
Randy Dunlap authored
Prefer stderr instead of stdout for error messages. This is a good practice and can help CI error detecting and reporting (0day in this case). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210815222334.9575-1-rdunlap@infradead.org
-
Michael Ellerman authored
As reported by lkp, if NUMA=n we see a build error: arch/powerpc/platforms/pseries/hotplug-cpu.c: In function 'pseries_cpu_hotplug_init': arch/powerpc/platforms/pseries/hotplug-cpu.c:1022:8: error: 'node_to_cpumask_map' undeclared 1022 | node_to_cpumask_map[node]); Use cpumask_of_node() which has an empty stub for NUMA=n, and when NUMA=y does a lookup from node_to_cpumask_map[]. Fixes: bd1dd4c5 ("powerpc/pseries: Prevent free CPU ids being reused on another node") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210816041032.2839343-1-mpe@ellerman.id.au
-
- 15 Aug, 2021 2 commits
-
-
Fangrui Song authored
Object files used to link .tmp_vmlinux.kallsyms1 have many R_PPC64_ADDR64 relocations in non-SHF_WRITE sections. There are many text relocations (e.g. in .rela___ksymtab_gpl+* and .rela__mcount_loc sections) in a -pie link and are disallowed by LLD: ld.lld: error: can't create dynamic relocation R_PPC64_ADDR64 against local symbol in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output >>> defined in arch/powerpc/kernel/head_64.o >>> referenced by arch/powerpc/kernel/head_64.o:(__restart_table+0x10) Newer GNU ld configured with "--enable-textrel-check=error" will report an error as well: $ ld-new -EL -m elf64lppc -pie ... -o .tmp_vmlinux.kallsyms1 ... ld-new: read-only segment has dynamic relocations Add "-z notext" to suppress the errors. Non-CONFIG_RELOCATABLE builds use the default -no-pie mode and thus R_PPC64_ADDR64 relocations can be resolved at link-time. Reported-by: Itaru Kitayama <itaru.kitayama@riken.jp> Co-developed-by: Bill Wendling <morbo@google.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Bill Wendling <morbo@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210813200511.1905703-1-morbo@google.com
-
Christophe Leroy authored
Using asm goto in __WARN_FLAGS() and WARN_ON() allows more flexibility to GCC. For that add an entry to the exception table so that program_check_exception() knowns where to resume execution after a WARNING. Here are two exemples. The first one is done on PPC32 (which benefits from the previous patch), the second is on PPC64. unsigned long test(struct pt_regs *regs) { int ret; WARN_ON(regs->msr & MSR_PR); return regs->gpr[3]; } unsigned long test9w(unsigned long a, unsigned long b) { if (WARN_ON(!b)) return 0; return a / b; } Before the patch: 000003a8 <test>: 3a8: 81 23 00 84 lwz r9,132(r3) 3ac: 71 29 40 00 andi. r9,r9,16384 3b0: 40 82 00 0c bne 3bc <test+0x14> 3b4: 80 63 00 0c lwz r3,12(r3) 3b8: 4e 80 00 20 blr 3bc: 0f e0 00 00 twui r0,0 3c0: 80 63 00 0c lwz r3,12(r3) 3c4: 4e 80 00 20 blr 0000000000000bf0 <.test9w>: bf0: 7c 89 00 74 cntlzd r9,r4 bf4: 79 29 d1 82 rldicl r9,r9,58,6 bf8: 0b 09 00 00 tdnei r9,0 bfc: 2c 24 00 00 cmpdi r4,0 c00: 41 82 00 0c beq c0c <.test9w+0x1c> c04: 7c 63 23 92 divdu r3,r3,r4 c08: 4e 80 00 20 blr c0c: 38 60 00 00 li r3,0 c10: 4e 80 00 20 blr After the patch: 000003a8 <test>: 3a8: 81 23 00 84 lwz r9,132(r3) 3ac: 71 29 40 00 andi. r9,r9,16384 3b0: 40 82 00 0c bne 3bc <test+0x14> 3b4: 80 63 00 0c lwz r3,12(r3) 3b8: 4e 80 00 20 blr 3bc: 0f e0 00 00 twui r0,0 0000000000000c50 <.test9w>: c50: 7c 89 00 74 cntlzd r9,r4 c54: 79 29 d1 82 rldicl r9,r9,58,6 c58: 0b 09 00 00 tdnei r9,0 c5c: 7c 63 23 92 divdu r3,r3,r4 c60: 4e 80 00 20 blr c70: 38 60 00 00 li r3,0 c74: 4e 80 00 20 blr In the first exemple, we see GCC doesn't need to duplicate what happens after the trap. In the second exemple, we see that GCC doesn't need to emit a test and a branch in the likely path in addition to the trap. We've got some WARN_ON() in .softirqentry.text section so it needs to be added in the OTHER_TEXT_SECTIONS in modpost.c Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/389962b1b702e3c78d169e59bcfac56282889173.1618331882.git.christophe.leroy@csgroup.eu
-
- 14 Aug, 2021 1 commit
-
-
Christophe Leroy authored
powerpc BUG_ON() and WARN_ON() are based on using twnei instruction. For catching simple conditions like a variable having value 0, this is efficient because it does the test and the trap at the same time. But most conditions used with BUG_ON or WARN_ON are more complex and forces GCC to format the condition into a 0 or 1 value in a register. This will usually require 2 to 3 instructions. The most efficient solution would be to use __builtin_trap() because GCC is able to optimise the use of the different trap instructions based on the requested condition, but this is complex if not impossible for the following reasons: - __builtin_trap() is a non-recoverable instruction, so it can't be used for WARN_ON - Knowing which line of code generated the trap would require the analysis of DWARF information. This is not a feature we have today. As mentioned in commit 8d4fbcfb ("Fix WARN_ON() on bitfield ops") the way WARN_ON() is implemented is suboptimal. That commit also mentions an issue with 'long long' condition. It fixed it for WARN_ON() but the same problem still exists today with BUG_ON() on PPC32. It will be fixed by using the generic implementation. By using the generic implementation, gcc will naturally generate a branch to the unconditional trap generated by BUG(). As modern powerpc implement zero-cycle branch, that's even more efficient. And for the functions using WARN_ON() and its return, the test on return from WARN_ON() is now also used for the WARN_ON() itself. On PPC64 we don't want it because we want to be able to use CFAR register to track how we entered the code that trapped. The CFAR register would be clobbered by the branch. A simple test function: unsigned long test9w(unsigned long a, unsigned long b) { if (WARN_ON(!b)) return 0; return a / b; } Before the patch: 0000046c <test9w>: 46c: 7c 89 00 34 cntlzw r9,r4 470: 55 29 d9 7e rlwinm r9,r9,27,5,31 474: 0f 09 00 00 twnei r9,0 478: 2c 04 00 00 cmpwi r4,0 47c: 41 82 00 0c beq 488 <test9w+0x1c> 480: 7c 63 23 96 divwu r3,r3,r4 484: 4e 80 00 20 blr 488: 38 60 00 00 li r3,0 48c: 4e 80 00 20 blr After the patch: 00000468 <test9w>: 468: 2c 04 00 00 cmpwi r4,0 46c: 41 82 00 0c beq 478 <test9w+0x10> 470: 7c 63 23 96 divwu r3,r3,r4 474: 4e 80 00 20 blr 478: 0f e0 00 00 twui r0,0 47c: 38 60 00 00 li r3,0 480: 4e 80 00 20 blr So we see before the patch we need 3 instructions on the likely path to handle the WARN_ON(). With the patch the trap goes on the unlikely path. See below the difference at the entry of system_call_exception where we have several BUG_ON(), allthough less impressing. With the patch: 00000000 <system_call_exception>: 0: 81 6a 00 84 lwz r11,132(r10) 4: 90 6a 00 88 stw r3,136(r10) 8: 71 60 00 02 andi. r0,r11,2 c: 41 82 00 70 beq 7c <system_call_exception+0x7c> 10: 71 60 40 00 andi. r0,r11,16384 14: 41 82 00 6c beq 80 <system_call_exception+0x80> 18: 71 6b 80 00 andi. r11,r11,32768 1c: 41 82 00 68 beq 84 <system_call_exception+0x84> 20: 94 21 ff e0 stwu r1,-32(r1) 24: 93 e1 00 1c stw r31,28(r1) 28: 7d 8c 42 e6 mftb r12 ... 7c: 0f e0 00 00 twui r0,0 80: 0f e0 00 00 twui r0,0 84: 0f e0 00 00 twui r0,0 Without the patch: 00000000 <system_call_exception>: 0: 94 21 ff e0 stwu r1,-32(r1) 4: 93 e1 00 1c stw r31,28(r1) 8: 90 6a 00 88 stw r3,136(r10) c: 81 6a 00 84 lwz r11,132(r10) 10: 69 60 00 02 xori r0,r11,2 14: 54 00 ff fe rlwinm r0,r0,31,31,31 18: 0f 00 00 00 twnei r0,0 1c: 69 60 40 00 xori r0,r11,16384 20: 54 00 97 fe rlwinm r0,r0,18,31,31 24: 0f 00 00 00 twnei r0,0 28: 69 6b 80 00 xori r11,r11,32768 2c: 55 6b 8f fe rlwinm r11,r11,17,31,31 30: 0f 0b 00 00 twnei r11,0 34: 7d 8c 42 e6 mftb r12 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b286e07fb771a664b631cd07a40b09c06f26e64b.1618331881.git.christophe.leroy@csgroup.eu
-
- 13 Aug, 2021 11 commits
-
-
Aneesh Kumar K.V authored
PAPR interface currently supports two different ways of communicating resource grouping details to the OS. These are referred to as Form 0 and Form 1 associativity grouping. Form 0 is the older format and is now considered deprecated. This patch adds another resource grouping named FORM2. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132223.225214-6-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
This helper is only used with the dispatch trace log collection. A later patch will add Form2 affinity support and this change helps in keeping that simpler. Also add a comment explaining we don't expect the code to be called with FORM0 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132223.225214-5-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
The associativity details of the newly added resourced are collected from the hypervisor via "ibm,configure-connector" rtas call. Update the numa distance details of the newly added numa node after the above call. Instead of updating NUMA distance every time we lookup a node id from the associativity property, add helpers that can be used during boot which does this only once. Also remove the distance update from node id lookup helpers. Currently, we duplicate parsing code for ibm,associativity and ibm,associativity-lookup-arrays in the kernel. The associativity array provided by these device tree properties are very similar and hence can use a helper to parse the node id and numa distance details. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132223.225214-4-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
Also make related code cleanup that will allow adding FORM2_AFFINITY in later patches. No functional change in this patch. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132223.225214-3-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
No functional change in this patch. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132223.225214-2-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
No functional change in this patch. arch_debugfs_dir is the generic kernel name declared in linux/debugfs.h for arch-specific debugfs directory. Architectures like x86/s390 already use the name. Rename powerpc specific powerpc_debugfs_root to arch_debugfs_dir. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132831.233794-2-aneesh.kumar@linux.ibm.com
-
Aneesh Kumar K.V authored
Similar to x86/s390 add a debugfs file to tune tlb_single_page_flush_ceiling. Also add a debugfs entry for tlb_local_single_page_flush_ceiling. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210812132831.233794-1-aneesh.kumar@linux.ibm.com
-
Pratik R. Sampat authored
In the numa=off kernel command-line configuration init_chip_info() loops around the number of chips and attempts to copy the cpumask of that node which is NULL for all iterations after the first chip. Hence, store the cpu mask for each chip instead of derving cpumask from node while populating the "chips" struct array and copy that to the chips[i].mask Fixes: 053819e0 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level") Cc: stable@vger.kernel.org # v4.3+ Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com> Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> [mpe: Rename goto label to out_free_chip_cpu_mask] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
-
Emmanuel Gil Peyrot authored
This selects the nintendo-otp module when building for this platform. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210801073822.12452-6-linkmauve@linkmauve.fr
-
Emmanuel Gil Peyrot authored
This can be used by the newly-added nintendo-otp nvmem module. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210801073822.12452-5-linkmauve@linkmauve.fr
-
Emmanuel Gil Peyrot authored
This is wrong, but needed in order to avoid overlapping ranges with the OTP area added in the next commit. A refactor of this part of the device tree is needed: according to Wiibrew[1], this area starts at 0x0d800000 and spans 0x400 bytes (that is, 0x100 32-bit registers), encompassing PIC and GPIO registers, amongst the ones already exposed in this device tree, which should become children of the control@d800000 node. [1] https://wiibrew.org/wiki/Hardware/Hollywood_RegistersSigned-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210801073822.12452-4-linkmauve@linkmauve.fr
-
- 10 Aug, 2021 23 commits
-
-
Marc Zyngier authored
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210802162630.2219813-13-maz@kernel.org
-
Cédric Le Goater authored
On P10, the feature doing an automatic "save & restore" of a VCPU interrupt context is set by default in OPAL. When a VP context is pulled out, the state of the interrupt registers are saved by the XIVE interrupt controller under the internal NVP structure representing the VP. This saves a costly store/load in guest entries and exits. If OPAL advertises the "save & restore" feature in the device tree, it should also have set the 'H' bit in the CAM line. Check that when vCPUs are connected to their ICP in KVM before going any further. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210720134209.256133-3-clg@kaod.org
-
Cédric Le Goater authored
Use it to hold platform specific features. P9 DD2 introduced single-escalation support. P10 will add others. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210720134209.256133-2-clg@kaod.org
-
Cédric Le Goater authored
There is no need to use the lockup detector ("noirqdebug") for IPIs. The ipistorm benchmark measures a ~10% improvement on high systems when this flag is set. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210719130614.195886-1-clg@kaod.org
-
Cédric Le Goater authored
The default domain of the PCI/MSIs is not the XIVE domain anymore. To list the IRQ mappings under XMON and debugfs, query the IRQ data from the low level XIVE domain. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-32-clg@kaod.org
-
Cédric Le Goater authored
PCI MSIs now live in an MSI domain but the underlying calls, which will EOI the interrupt in real mode, need an HW IRQ number mapped in the XICS IRQ domain. Grab it there. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-31-clg@kaod.org
-
Cédric Le Goater authored
pnv_opal_pci_msi_eoi() is called from KVM to EOI passthrough interrupts when in real mode. Adding MSI domain broke the hack using the 'ioda.irq_chip' field to deduce the owning PHB. Fix that by using the IRQ chip data in the MSI domain. The 'ioda.irq_chip' field is now unused and could be removed from the pnv_phb struct. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-30-clg@kaod.org
-
Cédric Le Goater authored
Before MSI domains, the default IRQ chip of PHB3 MSIs was patched by pnv_set_msi_irq_chip() with the custom EOI handler pnv_ioda2_msi_eoi() and the owning PHB was deduced from the 'ioda.irq_chip' field. This path has been deprecated by the MSI domains but it is still in use by the P8 CAPI 'cxl' driver. Rewriting this driver to support MSI would be a waste of time. Nevertheless, we can still remove the IRQ chip patch and set the IRQ chip data instead. This is cleaner. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-29-clg@kaod.org
-
Cédric Le Goater authored
desc->irq_data points to the top level IRQ data descriptor which is not necessarily in the XICS IRQ domain. MSIs are in another domain for instance. Fix that by looking for a mapping on the low level XICS IRQ domain. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-28-clg@kaod.org
-
Cédric Le Goater authored
The pnv_ioda2_msi_eoi() chip handler is not used anymore for MSIs. Simply use the check on the PSI-MSI chip. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-27-clg@kaod.org
-
Cédric Le Goater authored
MSIs should be fully managed by the PCI and IRQ subsystems now. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-26-clg@kaod.org
-
Cédric Le Goater authored
MSIs should be fully managed by the PCI and IRQ subsystems now. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-25-clg@kaod.org
-
Cédric Le Goater authored
That was a workaround in the XICS domain because of the lack of MSI domain. This is now handled. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-24-clg@kaod.org
-
Cédric Le Goater authored
The PowerNV and pSeries platforms now have support for both the XICS and XIVE IRQ domains. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-23-clg@kaod.org
-
Cédric Le Goater authored
PHB3s need an extra OPAL call to EOI the interrupt. The call takes an OPAL HW IRQ number but it is translated into a vector number in OPAL. Here, we directly use the vector number of the in-the-middle "PNV-MSI" domain instead of grabbing the OPAL HW IRQ number in the XICS parent domain. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-22-clg@kaod.org
-
Cédric Le Goater authored
XICS doesn't have any state associated with the IRQ. The support is straightforward and simpler than for XIVE. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-21-clg@kaod.org
-
Cédric Le Goater authored
It really helps to know how the HW is configured when tweaking the IRQ subsystem. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-20-clg@kaod.org
-
Cédric Le Goater authored
and clean up the error path. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-19-clg@kaod.org
-
Cédric Le Goater authored
This moves the IRQ initialization done under the different ICS backends in the common part of XICS. The 'map' handler becomes a simple 'check' on the HW IRQ at the FW level. As we don't need an ICS anymore in xics_migrate_irqs_away(), the XICS domain does not set a chip data for the IRQ. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-18-clg@kaod.org
-
Cédric Le Goater authored
We always had only one ICS per machine. Simplify the XICS driver by removing the ICS list. The ICS stored in the chip data of the XICS domain becomes useless and we don't need it anymore to migrate away IRQs from a CPU. This will be removed in a subsequent patch. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-17-clg@kaod.org
-
Cédric Le Goater authored
PCI MSI interrupt numbers are now mapped in a PCI-MSI domain but the underlying calls handling the passthrough of the interrupt in the guest need a number in the XIVE IRQ domain. Use the IRQ data mapped in the XIVE IRQ domain and not the one in the PCI-MSI domain. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-16-clg@kaod.org
-
Cédric Le Goater authored
The routine kvmppc_set_passthru_irq() calls kvmppc_xive_set_mapped() and kvmppc_xive_clr_mapped() with an IRQ descriptor. Use directly the host IRQ number to remove a useless conversion. Add some debug. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-15-clg@kaod.org
-
Cédric Le Goater authored
Passthrough PCI MSI interrupts are detected in KVM with a check on a specific EOI handler (P8) or on XIVE (P9). We can now check the PCI-MSI IRQ chip which is cleaner. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210701132750.1475580-14-clg@kaod.org
-