- 07 May, 2024 27 commits
-
-
Qu Wenruo authored
Since our inline extent cannot accept anything larger than a sector, there is really no need to pass all the compressed pages to insert_inline_extent(). And just in case, expand the ASSERT()s to make sure we only try inline with compressed size no larger than sectorsize. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
Currently we have two wrappers to allocate and free a page for compression usage: - btrfs_alloc_compr_page() - btrfs_free_compr_page() The allocator would try to grab a page from the pool, and only allocate a new page if the pool is empty. The reclaimer would check if the pool is full, and if not full it would put the page into the pool. This patch converts both helpers to use folio interfaces, and allowing further conversion of compression path to folios. Signed-off-by:
-
Qu Wenruo authored
For all the supported compression algorithms, the compression path would always need to grab the page cache, then do the compression. Normally we would get a page reference without any problem, since the write path should have already locked the pages in the write range. For the sake of error handling, we should handle the page cache miss case. Adds a common wrapper, btrfs_compress_find_get_page(), which calls find_get_page(), and do the error handling along with an error message. Callers inside compression path would only need to call btrfs_compress_find_get_page(), and error out if it returned any error. Signed-off-by:
-
Filipe Manana authored
Nowadays before starting a reflink operation we do this: 1) Take the VFS lock of the inodes in exclusive mode (a rw semaphore); 2) Take the mmap lock of the inodes (struct btrfs_inode::i_mmap_lock); 3) Flush all delalloc in the source and target ranges; 4) Wait for all ordered extents in the source and target ranges to complete; 5) Lock the source and destination ranges in the inodes' io trees. In step 5 we lock the source range because: 1) We needed to serialize against mmap writes, but that is not needed anymore because nowadays we do that through the inode's i_mmap_lock (step 2). This happens since commit 8c99516a ("btrfs: exclude mmaps while doing remap"); 2) To serialize against a concurrent relocation and avoid generating a delayed ref for an extent that was just dropped by relocation, see commit d8b55242 ("Btrfs: fix race between reflink/dedupe and relocation"). Locking the source range however blocks any concurrent reads for that range and makes test case generic/733 fail. So instead of locking the source range during reflinks, make relocation read lock the inode's i_mmap_lock, so that it serializes with a concurrent reflink while still able to run concurrently with mmap writes and allow concurrent reads too. Reviewed-by:
Boris Burkov <boris@bur.io> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Dan Carpenter authored
This check "if (inherit->num_qgroups > PAGE_SIZE)" is confusing and unnecessary. The problem with the check is that static checkers flag it as a potential mixup of between units of bytes vs number of elements. Fortunately, the check can safely be deleted because the next check is correct and applies an even stricter limit: if (size != struct_size(inherit, qgroups, inherit->num_qgroups)) return -EINVAL; The "inherit" struct ends in a variable array of __u64 and "inherit->num_qgroups" is the number of elements in the array. At the start of the function we check that: if (size < sizeof(*inherit) || size > PAGE_SIZE) return -EINVAL; Thus, since we verify that the whole struct fits within one page, that means that the number of elements in the inherit->qgroups[] array must be less than PAGE_SIZE. Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Goldwyn Rodrigues authored
Use folio instead of page in put_file_data(). Add a warning in case higher order folio is found, this will be implemented in the future. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Convert page references to folios and call the respective folio functions. Since find_or_create_page() takes a mask argument, call __filemap_get_folio() instead of filemap_grab_folio(). The patch assumes folio size is PAGE_SIZE, add a warning in case it's a higher order that will be implemented in the future. Signed-off-by:
-
Goldwyn Rodrigues authored
Convert usage of page to folio in prealloc_file_extent_cluster() Reviewed-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Anand Jain authored
Unify naming of return value to the preferred way. Signed-off-by:
-
Tavian Barnes authored
We recently tracked down a race condition that triggered a read for an extent buffer with EXTENT_BUFFER_UPTODATE already set. While this read was in progress, other concurrent readers would see the UPTODATE bit and return early as if the read was already complete, making accesses to the extent buffer conflict with the read operation that was overwriting it. Add a WARN_ON() to end_bbio_meta_read() for this situation to make similar races easier to spot in the future. Reviewed-by:
Tavian Barnes <tavianator@tavianator.com> Reviewed-by:
-
Tavian Barnes authored
We are clearing the bit and waking up any waiters in two different places. Factor that code out into a static helper function. Reviewed-by:
-
Filipe Manana authored
When unlocking a write lock on a drew lock, at btrfs_drew_write_unlock(), it's pointless to wake up tasks waiting to acquire a read lock if we didn't decrement the 'writers' counter down to 0, since a read lock can only be acquired when the counter reaches a value of 0. Doing so is harmless from a functional point of view, but it's not efficient due to unnecessarily waking up tasks just for them to sleep again on the waitqueue. So change this to wake up readers only if we decremented the 'writers' counter to 0. Signed-off-by:
-
Filipe Manana authored
There's no point in having a static writepages callback in inode.c that does nothing besides calling extent_writepages from extent_io.c. So just remove the callback at inode.c and rename extent_writepages() to btrfs_writepages(). Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Filipe Manana authored
There's no point in having a static readahead callback in inode.c that does nothing besides calling extent_readahead() from extent_io.c. So just remove the callback at inode.c and rename extent_readahead() to btrfs_readahead(). Reviewed-by:
-
Filipe Manana authored
The __btrfs_tree_lock() and __btrfs_tree_read_lock() are using a naming with a double underscore prefix, which is specially not proper for exported functions. Remove the double underscore prefix from their name and add the "_nested" suffix. Reviewed-by:
-
Filipe Manana authored
The functions btrfs_tree_lock() and btrfs_tree_read_lock() are very trivial so that can be made inline and avoid call overhead, as they are very often called inside critical sections (when searching a btree for example, attempting to lock a child node/leaf while holding a lock on the parent). So make them static inline, which even reduces the size of the btrfs module a little bit. Before this change: $ size fs/btrfs/btrfs.ko text data bss dec hex filename 1718786 156276 16920 1891982 1cde8e fs/btrfs/btrfs.ko After this change: $ size fs/btrfs/btrfs.ko text data bss dec hex filename 1718650 156260 16920 1891830 1cddf6 fs/btrfs/btrfs.ko Running fs_mark also showed a tiny improvement with this script: $ cat test.sh #!/bin/bash DEV=/dev/nullb0 MNT=/mnt/nullb0 FILES=100000 THREADS=$(nproc --all) echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $DEV mount $DEV $MNT OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k" for ((i = 1; i <= $THREADS; i++)); do OPTS="$OPTS -d $MNT/d$i" done fs_mark $OPTS umount $MNT Before this change: FSUse% Count Size Files/sec App Overhead 10 1200000 0 180894.0 10705410 16 2400000 0 228211.4 10765738 23 3600000 0 215969.6 11011072 30 4800000 0 199077.1 11145587 46 6000000 0 176624.1 11658470 After this change: FSUse% Count Size Files/sec App Overhead 10 1200000 0 185312.3 10708377 16 2400000 0 229320.4 10858013 23 3600000 0 217958.7 11006167 30 4800000 0 205122.9 11112899 46 6000000 0 178039.1 11438852 Reviewed-by: -
Filipe Manana authored
When creating a snapshot we first check with btrfs_lookup_dir_item() if there is a name collision in the parent directory and then return an error if there's a collision. Then later on when trying to insert a dir item for the snapshot we BUG_ON() if the return value is -EEXIST or -EOVERFLOW: static noinline int create_pending_snapshot(...) { (...) /* check if there is a file/dir which has the same name. */ dir_item = btrfs_lookup_dir_item(...); (...) ret = btrfs_insert_dir_item(...); /* We have check then name at the beginning, so it is impossible. */ BUG_ON(ret == -EEXIST || ret == -EOVERFLOW); if (ret) { btrfs_abort_transaction(trans, ret); goto fail; } (...) } It's impossible to get the -EEXIST because we previously checked for a potential collision with btrfs_lookup_dir_item() and we know that after that no one could have added a colliding name because at this point the transaction is in its critical section, state TRANS_STATE_COMMIT_DOING, so no one can join this transaction to add a colliding name and neither can anyone start a new transaction to do that. As for the -EOVERFLOW, that can't happen as long as we have the extended references feature enabled, which is a mkfs default for many years now. In either case, the BUG_ON() is excessive as we can properly deal with any error and can abort the transaction and jump to the 'fail' label, in which case we'll also get the useful stack trace (just like a BUG_ON()) from the abort if the error is either -EEXIST or -EOVERFLOW. So remove the BUG_ON(). Reviewed-by:
-
- 06 May, 2024 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Two more fixes, both have some visible effects on user space: - add check if quotas are enabled when passing qgroup inheritance info, this affects snapper that could fail to create a snapshot - do check for leaf/node flag WRITTEN earlier so that nodes are completely validated before access, this used to be done by integrity checker but it's been removed and left an unhandled case" * tag 'for-6.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: make sure that WRITTEN is set on all metadata blocks btrfs: qgroup: do not check qgroup inherit if qgroup is disabled -
Linus Torvalds authored
This reverts commit 07ed11af. Stephen Rostedt reports: "I went to run my tests on my VMs and the tests hung on boot up. Unfortunately, the most I ever got out was: [ 93.607888] Testing event system initcall: OK [ 93.667730] Running tests on all trace events: [ 93.669757] Testing all events: OK [ 95.631064] ------------[ cut here ]------------ Timed out after 60 seconds" and further debugging points to a possible circular locking dependency between the console_owner locking and the worker pool locking. Reverting the commit allows Steve's VM to boot to completion again. [ This may obviously result in the "[TTM] Buffer eviction failed" messages again, which was the reason for that original revert. But at this point this seems preferable to a non-booting system... ] Reported-and-bisected-by:
Steven Rostedt <rostedt@goodmis.org> Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/Acked-by:
Maxime Ripard <mripard@kernel.org> Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Timo Lindfors <timo.lindfors@iki.fi> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull slab fixes from Vlastimil Babka: - Fix for cleanup infrastructure (Dan Carpenter) This makes the __free(kfree) cleanup hooks not crash on error pointers. - SLUB fix for freepointer checking (Nicolas Bouchinet) This fixes a recently introduced bug that manifests when init_on_free, CONFIG_SLAB_FREELIST_HARDENED and consistency checks (slub_debug=F) are all enabled, and results in false-positive freepointer corrupt reports for caches that store freepointer outside of the object area. * tag 'slab-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: make __free(kfree) accept error pointers mm/slub: avoid zeroing outside-object freepointer for single free
-
Linus Torvalds authored
Merge tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay Pull auxdisplay fixes from Andy Shevchenko: - A couple of non-critical build fixes to Character LCD library - Miscellaneous fixes here and there * tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: auxdisplay: charlcd: Don't rebuild when CONFIG_PANEL_BOOT_MESSAGE=y auxdisplay: charlcd: Add missing MODULE_DESCRIPTION() auxdisplay: seg-led-gpio: Convert to platform remove callback returning void auxdisplay: linedisp: Group display drivers together
-
- 05 May, 2024 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
epoll can call out to vfs_poll() with a file pointer that may race with the last 'fput()'. That would make f_count go down to zero, and while the ep->mtx locking means that the resulting file pointer tear-down will be blocked until the poll returns, it means that f_count is already dead, and any use of it won't actually get a reference to the file any more: it's dead regardless. Make sure we have a valid ref on the file pointer before we call down to vfs_poll() from the epoll routines. Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/ Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Fix error logging and check user-supplied data when injecting an error in the versal EDAC driver * tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/versal: Do not log total error counts EDAC/versal: Check user-supplied data before injecting an error EDAC/versal: Do not register for NOC errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix incorrect delay handling in the plpks (keystore) code - Fix a panic when an LPAR boots with a frozen PE Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna Jain. * tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE powerpc/pseries: make max polling consistent for longer H_CALLs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc x86 fixes from Ingo Molnar: - Remove the broken vsyscall emulation code from the page fault code - Fix kexec crash triggered by certain SEV RMP table layouts - Fix unchecked MSR access error when disabling the x2APIC via iommu=off * tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Remove broken vsyscall emulation code from the page fault code x86/apic: Don't access the APIC when disabling x2APIC x86/sev: Add callback to apply RMP table fixups for kexec x86/e820: Add a new e820 table update helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Fix suspicious RCU usage in __do_softirq()" * tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Fix suspicious RCU usage in __do_softirq()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc/other driver fixes and new device ids for 6.9-rc7 that resolve some reported problems. Included in here are: - iio driver fixes - mei driver fix and new device ids - dyndbg bugfix - pvpanic-pci driver bugfix - slimbus driver bugfix - fpga new device id All have been in linux-next with no reported problems" * tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: slimbus: qcom-ngd-ctrl: Add timeout for wait operation dyndbg: fix old BUG_ON in >control parser misc/pvpanic-pci: register attributes via pci_driver fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card mei: me: add lunar lake point M DID mei: pxp: match against PCI_CLASS_DISPLAY_OTHER iio:imu: adis16475: Fix sync mode setting iio: accel: mxc4005: Reset chip on probe() and resume() iio: accel: mxc4005: Interrupt handling fixes dt-bindings: iio: health: maxim,max30102: fix compatible check iio: pressure: Fixes SPI support for BMP3xx devices iio: pressure: Fixes BME280 SPI driver data
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes for reported problems for 6.9-rc7. Included in here are: - usb core fixes for found issues - typec driver fixes for reported problems - usb gadget driver fixes for reported problems - xhci build fixes - dwc3 driver fixes for reported issues All of these have been in linux-next this past week with no reported problems" * tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Check for port partner validity before consuming it usb: typec: tcpm: enforce ready state when queueing alt mode vdm usb: typec: tcpm: unregister existing source caps before re-registration usb: typec: tcpm: clear pd_event queue in PORT_RESET usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device usb: ohci: Prevent missed ohci interrupts usb: typec: qcom-pmic: fix pdphy start() error handling usb: typec: qcom-pmic: fix use-after-free on late probe errors usb: gadget: f_fs: Fix a race condition when processing setup packets. USB: core: Fix access violation during port device removal usb: dwc3: core: Prevent phy suspend during init usb: xhci-plat: Don't include xhci.h usb: gadget: uvc: use correct buffer size when parsing configfs lists usb: gadget: composite: fix OS descriptors w_value logic usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - a new ID for ASUS ROG RAIKIRI controllers added to xpad driver - amimouse driver structure annotated with __refdata to prevent section mismatch warnings. * tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: amimouse - mark driver struct with __refdata to prevent section mismatch Input: xpad - add support for ASUS ROG RAIKIRI
-
