- 27 Nov, 2020 5 commits
-
-
Daniel Gomez authored
Stop video streaming when requested. When s_stream is called to stop the video streaming, if/else condition calls start_streaming function instead of the one for stopping it. Fixes: 43619059 ("media: imx214: Add imx214 camera sensor driver") Signed-off-by:
Daniel Gomez <daniel@qtec.com> Signed-off-by:
Ricardo Ribalda <ribalda@kernel.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Antti Palosaari authored
SPI bus number must be assigned dynamically for each device, otherwise it will crash when multiple devices are plugged to system. Reported-and-tested-by: syzbot+c60ddb60b685777d9d59@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jia-Ju Bai authored
In msi2500_stop_streaming(), there is an if statement on line 870 to check whether dev->udev is NULL: if (dev->udev) When dev->udev is NULL, it is used on line 877: msi2500_ctrl_msg(dev, CMD_STOP_STREAMING, 0) usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), ...) Thus, a possible null-pointer dereference may occur. To fix this bug, dev->udev is checked before calling msi2500_ctrl_msg(). This bug is found by a static analysis tool STCheck written by us. Signed-off-by:Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add a new label that puts the last used node, and edit the goto statements in the middle of the loop to first go to the new label. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported on: https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/ if gp8psk_usb_in_op() returns an error, the status var is not initialized. Yet, this var is used later on, in order to identify: - if the device was already started; - if firmware has loaded; - if the LNBf was powered on. Using status = 0 seems to ensure that everything will be properly powered up. So, instead of the proposed solution, let's just set status = 0. Reported-by:
syzbot <syzkaller@googlegroups.com> Reported-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 26 Nov, 2020 6 commits
-
-
Sean Young authored
The rc_proto enum values should be ignored for now, otherwise we get warnings like: Documentation/output/lirc.h.rst:6: WARNING: undefined label: rc-proto-max (if the link has no caption the label must precede a section header) Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 72e637fe ("media: rc: validate that "rc_proto" is reasonable") Fixes: cea357bc ("media: lirc: ensure RC_PROTO_MAX has documentation") Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Christian Hewitt authored
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box used by O2.cz. This keymap adds support for the default IR controls. Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Signed-off-by:
-
Kai Muenz authored
Hauppauge MAX S2 or WinTV NOVA HD USB2.0. Signed-off-by:
Kai Muenz <squ@tent.at> Signed-off-by:
-
Keita Suzuki authored
When dvb_create_media_graph fails, the debugfs kept inside client should be released. However, the current implementation does not release them. Fix this by adding a new goto label to call smsdvb_debugfs_release. Fixes: 0d3ab841 ("[media] dvb core: must check dvb_create_media_graph()") Signed-off-by:
Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by:
-
Mauro Carvalho Chehab authored
Add documentation for enum rc_proto and struct lirc_scancode at the generated docs. Signed-off-by:
-
Mauro Carvalho Chehab authored
Make the license for those documents also compatible with GPLv2. Signed-off-by:
-
- 25 Nov, 2020 22 commits
-
-
AngeloGioacchino Del Regno authored
The SDM630/660 SoCs (and variants) have another clock source for the PHY, which must be set to a rate that's equal or greater than the CSI PHY timer clock: failing to do this will produce PHY overflows when trying to get a stream from a very high bandwidth camera sensor and outputting no frame or a partial one. Since I haven't found any usecase in which the csiX_phy clock needs to be higher than the csiXphy_timer, let's just set the same rate on both, which seems to work just perfect. Signed-off-by:
AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
AngeloGioacchino Del Regno authored
The CSIPHY on SDM630/660 needs a slightly longer T_HS_CLK_MISS configuration on lanes CFG4. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Add support for the Qualcomm SDM630/636/660 and SDA variants' camera subsystem. These SoCs are equipped with: - 3x CSI PHY 3-Phase v1.0 (downstream csiphy-v3.5) - 4x CSID v5.0 - 2x ISPIF v3.0 - 2x VFE 4.8 As a note, this camera subsystem is very similar to the one that is found in the MSM8998/APQ8098 SoCs. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Add bindings for qcom,sdm660-camss in order to support the camera subsystem on SDM630/660 and SDA variants. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
AngeloGioacchino Del Regno authored
Add the support for VFE 4.8 in the camss-vfe-4-7 driver, as this one really is a minor revision, requiring the very same management and basically having the same register layout as VFE 4.7, but needing a different QoS and DS configuration, using a different register to enable the wm and habing the same UB size for both instances (instead of a different size between instance 0 and 1). Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation to add support for VFE 4.8, rename these functions by adding the vfe version that they are referred to (for example, vfe_get_ub_size -> vfe47_get_ub_size), as these are the only ones that will be different for the VFE version 4.8. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Resetting the ISPIF VFE0 context is wrong if we are using the VFE1 for dual-camera or simply because a secondary camera is connected to it: in this case the reset will always happen on the VFE0 ctx of the ISPIF, which is .. useless. Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose where to do the (or what to) reset based on the VFE line id. Signed-off-by:
-
Sean Young authored
The enum rc_proto value RC_PROTO_MAX has no documentation, this is causing a warning while building the documentation. Fixes: 72e637fe ("media: rc: validate that "rc_proto" is reasonable") Reported-by:
-
Sean Young authored
This allows the timeout to be set with the LIRC_SET_REC_TIMEOUT ioctl. The timeout was hardcoded at just over 20ms, but returned 120ms when queried with the LIRC_GET_REC_TIMEOUT ioctl. This also ensures the idle threshold is set correctly with a base clock other than 8Mhz. Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Sean Young authored
If a user holds a button down on a remote, then no ir idle interrupt will be generated until the user releases the button, depending on how quickly the remote repeats. No IR is processed until that point, which means that holding down a button may not do anything. This also resolves an issue on a Cubieboard 1 where the IR receiver is picking up ambient infrared as IR and spews out endless "rc rc0: IR event FIFO is full!" messages unless you choose to live in the dark. Cc: stable@vger.kernel.org Tested-by:
Hans Verkuil <hverkuil@xs4all.nl> Acked-by:
-
Dave Stevenson authored
The flag V4L2_SUBDEV_FL_HAS_EVENTS is required if the subdev can generate events. It can create events from the ctrl handler, therefore this is required. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Rui Miguel Silva authored
Convert imx7 mipi csi2 bindings documentation to yaml schema, remove the textual document and update MAINTAINERS entry. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
-
Rui Miguel Silva authored
Convert imx7-csi bindings documentation to yaml schema, remove the textual bindings document and update MAINTAINERS entry. Signed-off-by:
-
Rui Miguel Silva authored
Convert ov2680 sensor bindings documentation to yaml schema, remove the textual bindings document and update MAINTAINERS entry. Signed-off-by:
-
Nigel Christian authored
Comment has 'the' repeated twice. Let's clean it up. This patch reduces checkpatch warnings for this file to nil. Signed-off-by:
Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by:
-
Xu Wang authored
Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove it. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Reviewed-by:
-
Bingbu Cao authored
OTP data access of ov2740 need enable the streaming mode to load and it could be done in any time, so driver need allow the OTP data access during streaming instead of return EBUSY, this patch try to read the OTP data out in STREAMON if OTP data is not ready before first time streaming start. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Qingwu Zhang <qingwu.zhang@intel.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Bingbu Cao authored
OTP data access of ov2740 in probe need power up, it may cause the camera flash LED blink during probe if the LED use same power rail with camera, this patch move the OTP data access out of probe, it will only occur on demand from user by nvmem sysfs. Signed-off-by:
-
Hugues Fruchet authored
Add support of BT656 embedded synchronization bus. This mode allows to save hardware synchro lines hsync & vsync by replacing them with synchro codes embedded in data stream. This bus type is only compatible with 8 bits width data bus. Due to reserved values 0x00 & 0xff used for synchro codes, valid data vary from 0x1 to 0xfe, this is up to sensor to clip accordingly pixel data. As a consequence of this clipping, JPEG is not supported with this bus type. DCMI crop feature is also not available with this bus type. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Add support of BT656 embedded synchronization bus mode in DCMI driver. Add "bus-type" property and make it required so that there is no ambiguity between parallel mode (bus-type=5) and BT656 mode (bus-type=6). BT656 mode allows to save hardware synchro lines hsync & vsync by replacing them with synchro codes embedded in data stream, hence hsync-active & vsync-active properties are useless in this mode. With DCMI, BT656 bus mode is only compatible with 8 bits width data bus. Signed-off-by:
-
Tianshu Qiu authored
Add a v4l2 sub-device driver for the OminiVision ov9734 image sensor which can deliver maximum 720p image frames at 30 fps. This driver also add vertical blanking, exposure, test pattern, digital and analog gain control for the image sensor. Signed-off-by:
Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by:
-
Andy Shevchenko authored
There are few nice macros in mm.h, some of which we may use here. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
- 17 Nov, 2020 7 commits
-
-
Hans Verkuil authored
In two places time32 structures were defined, but they are not used if CONFIG_COMPAT_32BIT_TIME is not set. Put these two structs under #ifdef CONFIG_COMPAT_32BIT_TIME as well to clearly indicate that they are only used if that config option is set. Signed-off-by:
-
Qinglang Miao authored
Fix to goto snd_error in error handling case when fails to do snd_ctl_add, as done elsewhere in this function. Fixes: 28cae868 ("[media] solo6x10: move out of staging into drivers/media/pci.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Hans Verkuil authored
Fix this smatch error: saa7134-video.c:1286 saa7134_g_fmt_vid_overlay() error: we previously assumed 'f->fmt.win.clips' could be null (see line 1279) This is actually a false error since if f->fmt.win.clips is NULL, clipcount will be set to 0, so the clips array won't be touched, but it doesn't hurt to make this explicit in the code. Signed-off-by:
-
Zebediah Figura authored
cx231xx_close_extension and hence cx231xx_audio_fini() are called with the cx231xx device lock held, but snd_cx231xx_pcm_close() also grabs that mutex when closing the file on behalf of arecord. There seems to be no reason to wait for sound card resources to be released, so let the release be asynchronous. Tested with a Hauppauge 955Q (2040:b123) and Linux 5.9.6; the hang described in the bug no longer occurs and disconnecting the device correctly terminates arecord with ENODEV. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=204087Signed-off-by:
Zebediah Figura <zfigura@codeweavers.com> Signed-off-by:
-
Sakari Ailus authored
Prevent NULL (or close to NULL) pointer dereference in various places by registering the video device only when the V4L2 m2m framework has been set up. Fixes: commit 96d8eab5 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device") Signed-off-by:
-
Dikshita Agarwal authored
remove check for V4L2_CTRL_TYPE_BUTTON from v4l2_ctrl_request_clone and v4l2_ctrl_request_setup(). Signed-off-by:
Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by:
-
Helen Koike authored
All the items in the TODO list were addressed, uapi was reviewed, documentation written, checkpatch errors fixed, several bugs fixed. There is no big reason to keep this driver in staging, so move it out. Dt-bindings Verified with: make ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml Fields of MAINTAINERS file sorted according to output of ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order [dt-bindings: media: rkisp1: move rockchip-isp1 bindings out of staging] [dt-bindings: media: rkisp1: move rockchip-isp1 bindings out of staging] [hverkuil: fix various checkpatch alignment warnings] Signed-off-by:
Helen Koike <helen.koike@collabora.com> Acked-by:
-
