u128_xor() takes pointers to quantities that are assumed to be at least
64-bit aligned, which is not guaranteed to be the case in the smp_c1()
routine. So switch to crypto_xor() instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

btrtl_dev->ic_info is only available from the controller on cold boot
(the lmp subversion matches the device model and this is used to look up
the ic_info). On warm boots (firmware already loaded),
btrtl_dev->ic_info is null.

Fixes: 05672a2c (Bluetooth: btrtl: Enable central-peripheral role)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Looks like this was missed when patching the source to clear the structures
throughout, causing this one instance to clear the struct after the response
id is assigned.

Fixes: eddb7732 ("Bluetooth: A2MP: Fix not initializing all members")
Signed-off-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Enable the central-peripheral role on RTL8822CE. This enables creating
connections while there is an existing connection in the slave role.

This change can be confirmed in userspace via `bluetoothctl show` which
will now show "Roles: central-peripheral".
Reviewed-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The bt_dev_<level> macros already append a newline.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Many controllers do not allow HCI Create Connection while it is doing
Inquiry. This patch adds Inquiry Cancel before Create Connection in this
case to allow the controller to do Create Connection. User space will be
aware of this Inquiry cancellation and they may issue another discovery
request afterwards.

Sample Command Disallowed response of HCI Create Connection:
< HCI Command: Inquiry (0x01|0x0001) plen 5
        Access code: 0x9e8b33 (General Inquiry)
        Length: 10.24s (0x08)
        Num responses: 0
> HCI Event: Command Status (0x0f) plen 4
      Inquiry (0x01|0x0001) ncmd 2
        Status: Success (0x00)
< HCI Command: Create Connection (0x01|0x0005) plen 13
        Address: XX:XX:XX:XX:XX:XX
        Packet type: 0xcc18
        Page scan repetition mode: R2 (0x02)
        Page scan mode: Mandatory (0x00)
        Clock offset: 0x0000
        Role switch: Allow slave (0x01)
> HCI Event: Command Status (0x0f) plen 4
      Create Connection (0x01|0x0005) ncmd 1
        Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
        Status: Command Disallowed (0x0c)
        Handle: 65535
        Address: XX:XX:XX:XX:XX:XX
        Link type: ACL (0x01)
        Encryption: Disabled (0x00)
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Switch and case where not properly aligned
Signed-off-by: Jagdish Tirumala <t.jag587@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This reverts commit a63f23c9d139377833a139b179793fea79ee198f.

get_unaligned_{le16|le32|le64}(p) is meant to replace code of the form
le16_to_cpu(get_unaligned((__le16 *)p)). There is no need to explicitly
do leXX_to_cpu() if get_unaligned_leXX() is used.

https://lwn.net/Articles/277779/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This enables bcm driver to properly handle ISO packets.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The Realtek RTL8822CE Bluetooth controller support Microsoft vendor
extension and it uses 0xFCF0 for VsMsftOpCode.

The following test step was performed.
- Boot the test device with RTL8822CE and verify the INFO print in
dmesg.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The Intel JeffersonPeak, HarrisonPeak and CyclonePeak Bluetooth
controllers support the Microsoft vendor extension and they are using
0xFC1E for VsMsftOpCode.

< HCI Command: Vendor (0x3f|0x001e) plen 1
        00
> HCI Event: Command Complete (0x0e) plen 15
      Vendor (0x3f|0x001e) ncmd 1
        Status: Success (0x00)
        00 3f 00 00 00 00 00 00 00 01 50

The following test step was performed.
- Boot the test devices with HarrisonPeak and verify INFO print in
dmesg.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The following Qualcomm WCN399x Bluetooth controllers support the
Microsoft vendor extension and they are using 0xFD70 for VsMsftOpCode.
-WCN3990
-WCN3991
-WCN3998

< HCI Command: ogf 0x3f, ocf 0x0170, plen 1
  00
> HCI Event: 0x0e plen 18
  01 70 FD 00 00 1F 00 00 00 00 00 00 00 04 4D 53 46 54

The following test step was performed.
- Boot the device with WCN3991 and verify INFO print in dmesg.
Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Just like MGMT_OP_START_DISCOVERY, we should reject
MGMT_OP_START_SERVICE_DISCOVERY with MGMT_STATUS_BUSY when we are paused
for suspend.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

we should send hci reset command before bt turn off, which can reset bt
firmware status.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Add a missing SUSPEND_SCAN_ENABLE in passive scan, remove the separate
function for configuring le scan during suspend and update the request
complete function to clear both enable and disable tasks.

Fixes: dce0a4be ("Bluetooth: Set missing suspend task bits")
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

In hci_uart_write_work, there is a loop/goto checking the value of
HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying
hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns.

In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets
HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending
hci_uart_write_work worker will do hci_uart_dequeue properly.

However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after
the loop breaks, but before HCI_UART_SENDING is cleared in
hci_uart_write_work, the schedule_work is skipped incorrectly.

Fix this race by changing the order of HCI_UART_SENDING and
HCI_UART_TX_WAKEUP modification.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Fixes: 82f5169b ("Bluetooth: hci_uart: add serdev driver support library")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Add support to read FW build version from debugfs node.
This info can be read from
/sys/kernel/debug/bluetooth/hci0/firmware_info
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When alt mode 6 is not available, fallback to the kernel <= 5.7 behavior
of always using alt mode 1.

Prior to kernel 5.8, btusb would always use alt mode 1 for WBS (Wide
Band Speech aka mSBC aka transparent SCO).  In commit baac6276
("Bluetooth: btusb: handle mSBC audio over USB Endpoints") this
was changed to use alt mode 6, which is the recommended mode in the
Bluetooth spec (Specifications of the Bluetooth System, v5.0, Vol 4.B
§2.2.1).  However, many if not most BT USB adapters do not support alt
mode 6.  In fact, I have been unable to find any which do.

In kernel 5.8, this was changed to use alt mode 6, and if not available,
use alt mode 0.  But mode 0 has a zero byte max packet length and can
not possibly work.  It is just there as a zero-bandwidth dummy mode to
work around a USB flaw that would prevent device enumeration if
insufficient bandwidth were available for the lowest isoc mode
supported.

In effect, WBS was broken for all USB-BT adapters that do not support
alt 6, which appears to nearly all of them.

Then in commit 461f95f0 ("Bluetooth: btusb: USB alternate setting 1 for
WBS") the 5.7 behavior was restored, but only for Realtek adapters.

I've tested a Broadcom BRCM20702A and CSR 8510 adapter, both work with
the 5.7 behavior and do not with the 5.8.

So get rid of the Realtek specific flag and use the 5.7 behavior for all
adapters as a fallback when alt 6 is not available.  This was the
kernel's behavior prior to 5.8 and I can find no adapters for which it
is not correct.  And even if there is an adapter for which this does not
work, the current behavior would be to fall back to alt 0, which can not
possibly work either, and so is no better.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Some resource should be released in the error handling path of the probe
function, as already done in the remove function.

The remove function was fixed in commit 5052de8d ("soc: qcom: smd:
Transition client drivers from smd to rpmsg")

Fixes: 1511cc75 ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Pull staging / IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 5.11-rc1

  Lots of different things in here:

   - loads of driver updates

   - so many coding style cleanups

   - new IIO drivers

   - Android ION code is finally removed from the tree

   - wimax drivers are moved to staging on their way out of the kernel

  Nothing really exciting, just the constant grind of kernel development :)

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
  staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe()
  staging: most: Fix spelling mistake "tranceiver" -> "transceiver"
  staging: qlge: remove duplicate word in comment
  staging: comedi: mf6x4: Fix AI end-of-conversion detection
  staging: greybus: Add TODO item about modernizing the pwm code
  pinctrl: ralink: add a pinctrl driver for the rt2880 family
  dt-bindings: pinctrl: rt2880: add binding document
  staging: rtl8723bs: remove ELEMENT_ID enum
  staging: rtl8723bs: remove unused macros
  staging: rtl8723bs: replace EID_EXTCapability
  staging: rtl8723bs: replace EID_BSSIntolerantChlReport
  staging: rtl8723bs: replace EID_BSSCoexistence
  staging: rtl8723bs: replace _MME_IE_
  staging: rtl8723bs: replace _WAPI_IE_
  staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_
  staging: rtl8723bs: replace _ERPINFO_IE_
  staging: rtl8723bs: replace _CHLGETXT_IE_
  staging: rtl8723bs: replace _COUNTRY_IE_
  staging: rtl8723bs: replace _IBSS_PARA_IE_
  staging: rtl8723bs: replace _TIM_IE_
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 5.11-rc1.

  Continuing the tradition of previous -rc1 pulls, there seems to be
  more and more tiny driver subsystems flowing through this tree.

  Lots of different things, all of which have been in linux-next for a
  while with no reported issues:

   - extcon driver updates

   - habannalab driver updates

   - mei driver updates

   - uio driver updates

   - binder fixes and features added

   - soundwire driver updates

   - mhi bus driver updates

   - phy driver updates

   - coresight driver updates

   - fpga driver updates

   - speakup driver updates

   - slimbus driver updates

   - various small char and misc driver updates"

* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
  extcon: max77693: Fix modalias string
  extcon: fsa9480: Support TI TSU6111 variant
  extcon: fsa9480: Rewrite bindings in YAML and extend
  dt-bindings: extcon: add binding for TUSB320
  extcon: Add driver for TI TUSB320
  slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
  siox: Make remove callback return void
  siox: Use bus_type functions for probe, remove and shutdown
  spmi: Add driver shutdown support
  spmi: fix some coding style issues at the spmi core
  spmi: get rid of a warning when built with W=1
  uio: uio_hv_generic: use devm_kzalloc() for private data alloc
  uio: uio_fsl_elbc_gpcm: use device-managed allocators
  uio: uio_aec: use devm_kzalloc() for uio_info object
  uio: uio_cif: use devm_kzalloc() for uio_info object
  uio: uio_netx: use devm_kzalloc() for or uio_info object
  uio: uio_mf624: use devm_kzalloc() for uio_info object
  uio: uio_sercos3: use device-managed functions for simple allocs
  uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
  uio: uio_dmem_genirq: convert simple allocations to device-managed
  ...

Merge tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core updates for 5.11-rc1

  This time there was a lot of different work happening here for some
  reason:

   - redo of the fwnode link logic, speeding it up greatly

   - auxiliary bus added (this was a tag that will be pulled in from
     other trees/maintainers this merge window as well, as driver
     subsystems started to rely on it)

   - platform driver core cleanups on the way to fixing some long-time
     api updates in future releases

   - minor fixes and tweaks.

  All have been in linux-next with no (finally) reported issues. Testing
  there did helped in shaking issues out a lot :)"

* tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
  driver core: platform: don't oops in platform_shutdown() on unbound devices
  ACPI: Use fwnode_init() to set up fwnode
  misc: pvpanic: Replace OF headers by mod_devicetable.h
  misc: pvpanic: Combine ACPI and platform drivers
  usb: host: sl811: Switch to use platform_get_mem_or_io()
  vfio: platform: Switch to use platform_get_mem_or_io()
  driver core: platform: Introduce platform_get_mem_or_io()
  dyndbg: fix use before null check
  soc: fix comment for freeing soc_dev_attr
  driver core: platform: use bus_type functions
  driver core: platform: change logic implementing platform_driver_probe
  driver core: platform: reorder functions
  driver core: make driver_probe_device() static
  driver core: Fix a couple of typos
  driver core: Reorder devices on successful probe
  driver core: Delete pointless parameter in fwnode_operations.add_links
  driver core: Refactor fw_devlink feature
  efi: Update implementation of add_links() to create fwnode links
  of: property: Update implementation of add_links() to create fwnode links
  driver core: Use device's fwnode to check if it is waiting for suppliers
  ...

Pull tty / serial updates from Greg KH:
 "Here is the "large" set of tty and serial patches for 5.11-rc1.

  Nothing major at all, some cleanups and some driver removals, always a
  nice sign:

   - build warning cleanups

   - vt locking and logic unwinding and cleanups

   - tiny serial driver fixes and updates

   - removal of the synclink serial driver as it's no longer needed

   - removal of dead termiox code

  All of this has been in linux-next for a while with no reported issues"

* tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits)
  serial: 8250_pci: Drop bogus __refdata annotation
  tty: serial: meson: enable console as module
  serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access
  serial: imx: Move imx_uart_probe_dt() content into probe()
  serial: imx: Remove unneeded of_device_get_match_data() NULL check
  tty: Fix whitespace inconsistencies in vt_io_ioctl
  serial_core: Check for port state when tty is in error state
  dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC
  tty: use const parameters in port-flag accessors
  tty: use assign_bit() in port-flag accessors
  earlycon: drop semicolon from earlycon macro
  tty: Remove dead termiox code
  tty/serial/imx: Enable TXEN bit in imx_poll_init().
  tty : serial: jsm: Fixed file by adding spacing
  tty: serial: uartlite: Support probe deferral
  earlycon: simplify earlycon-table implementation
  tty: serial: bcm63xx: lower driver dependencies
  serial: mxs-auart: Remove unneeded platform_device_id
  serial: 8250-mtk: Fix reference leak in mtk8250_probe
  serial: imx: Remove unused .id_table support
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big USB and thunderbolt pull request for 5.11-rc1.

  Nothing major in here, just the grind of constant development to
  support new hardware and fix old issues:

   - thunderbolt updates for new USB4 hardware

   - cdns3 major driver updates

   - lots of typec updates and additions as more hardware is available

   - usb serial driver updates and fixes

   - other tiny USB driver updates

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: phy: convert comma to semicolon
  usb: ucsi: convert comma to semicolon
  usb: typec: tcpm: convert comma to semicolon
  usb: typec: tcpm: Update vbus_vsafe0v on init
  usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
  usb: typec: Add class for plug alt mode device
  USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
  USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
  USB: typec: tcpm: Fix PR_SWAP error handling
  USB: typec: tcpm: Hard Reset after not receiving a Request
  USB: gadget: f_fs: remove likely/unlikely
  usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
  USB: gadget: f_midi: setup SuperSpeed Plus descriptors
  USB: gadget: f_acm: add support for SuperSpeed Plus
  USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
  usb: typec: intel_pmc_mux: Configure cable generation value for USB4
  MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
  usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
  usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
  usb: cdns3: fix NULL pointer dereference on no platform data
  ...

Pull sound updates from Takashi Iwai:
 "Lots of changes (slightly more code increase than usual) at this time,
  while most of code changes are ASoC driver-specific.

  Here are some highlights:

  Core:

   - The new auxiliary bus implementation for Intel DSP, which will be
     used by other drivers as well

   - Lots of ASoC core cleanups and refactoring

   - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others

   - Compress-offload API enhancement for the pause during draining

  HD- and USB-audio:

   - Enhancements of the USB-audio implicit feedback support, including
     better full-duplex operations

   - Continued CA0132 improvements and fixes

   - A few new quirk entries, HDMI audio fixes

  ASoC:

   - Support for boot time selection of Intel DSP firmware, which should
     help distros/users testing new stuff more easily; the kconfig was
     moved to boot time option, too

   - Some basic DPCM support in audio graph card

   - Removal of old pre-DT Freescale drivers

   - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
     Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
     RT715, Qualcomm SM8250 and simple GPIO based muxes"

* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
  ALSA: pcm: oss: Fix potential out-of-bounds shift
  ALSA: usb-audio: Fix potential out-of-bounds shift
  ALSA: hda/ca0132 - Add ZxR surround DAC setup.
  ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
  ALSA: hda/hdmi: packet buffer index must be set before reading value
  ASoC: SOF: imx: update kernel-doc description
  ASoC: mediatek: mt8183: delete some unreachable code
  ASoC: mediatek: mt8183: add PM ops to machine drivers
  ASoC: topology: Fix wrong size check
  ASoC: topology: Add missing size check
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
  ALSA: usb-audio: Fix control 'access overflow' errors from chmap
  ALSA: hda/hdmi: always print pin NIDs as hexadecimal
  ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
  ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
  ...

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

Merge misc updates from Andrew Morton:

 - a few random little subsystems

 - almost all of the MM patches which are staged ahead of linux-next
   material. I'll trickle to post-linux-next work in as the dependents
   get merged up.

Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
  mm: cleanup kstrto*() usage
  mm: fix fall-through warnings for Clang
  mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
  mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
  mm:backing-dev: use sysfs_emit in macro defining functions
  mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
  mm: use sysfs_emit for struct kobject * uses
  mm: fix kernel-doc markups
  zram: break the strict dependency from lzo
  zram: add stat to gather incompressible pages since zram set up
  zram: support page writeback
  mm/process_vm_access: remove redundant initialization of iov_r
  mm/zsmalloc.c: rework the list_add code in insert_zspage()
  mm/zswap: move to use crypto_acomp API for hardware acceleration
  mm/zswap: fix passing zero to 'PTR_ERR' warning
  mm/zswap: make struct kernel_param_ops definitions const
  userfaultfd/selftests: hint the test runner on required privilege
  userfaultfd/selftests: fix retval check for userfaultfd_open()
  userfaultfd/selftests: always dump something in modes
  userfaultfd: selftests: make __{s,u}64 format specifiers portable
  ...

Range checks can folded into proper conversion function.  kstrto*() exist
for all arithmetic types.

Link: https://lkml.kernel.org/r/20201122123759.GC92364@localhost.localdomainSigned-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of
warnings by explicitly adding a break statement instead of just letting
the code fall through to the next, and by adding a fallthrough
pseudo-keyword in places where the code is intended to fall through.

Link: https://github.com/KSPP/linux/issues/115
Link: https://lkml.kernel.org/r/f5756988b8842a3f10008fbc5b0a654f828920a9.1605896059.git.gustavoars@kernel.orgSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert the unbounded uses of sprintf to sysfs_emit.

A few conversions may now not end in a newline if the output buffer is
overflowed.

Link: https://lkml.kernel.org/r/0c90a90f466167f8c37de4b737553cf49c4a277f.1605376435.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the function to use sysfs_emit_at while neatening the uses of
sprintf and overwriting the last space char with a newline to avoid
possible output buffer overflow.

Miscellanea:

 - in shmem_enabled_show, the removal of the indirected use of fmt
   allows __printf verification

Link: https://lkml.kernel.org/r/b612a93825e5ea330cb68d2e8b516e9687a06cc6.1605376435.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The cocci script used in commit bdacbb8d04f ("mm: Use sysfs_emit for
struct kobject * uses") does not convert the name##_show macro because the
macro uses concatenation via ##.

Convert it by hand.

Link: https://lkml.kernel.org/r/45ec6cfc177d743f9c0ebaf35e43969dce43af42.1605376435.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert the only use of sprintf with struct kobject * that the cocci
script could not convert.

Miscellanea:

 - Neaten the uses of a constant string with sysfs_emit to use a const
   char * to reduce overall object size

Link: https://lkml.kernel.org/r/7df6be66bbd68e1a0bca9d35aca1341dbf94d2a7.1605376435.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm: Convert sysfs sprintf family to sysfs_emit", v2.

Use the new sysfs_emit family and not the sprintf family.

This patch (of 5):

Use the sysfs_emit function instead of the sprintf family.

Done with cocci script as in commit 3c6bff3c ("RDMA: Convert sysfs
kobject * show functions to use sysfs_emit()")

Link: https://lkml.kernel.org/r/cover.1605376435.git.joe@perches.com
Link: https://lkml.kernel.org/r/9c249215bad6df616ba0410ad980042694970c1b.1605376435.git.joe@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kernel-doc markups should use this format:
        identifier - description

Fix some issues on mm files:

1) The definition for get_user_pages_locked() doesn't follow it.  Also,
   it expects a short descrpition at the header, followed by a long one,
   after the parameters.  Fix it.

2) Kernel-doc requires that a kernel-doc markup to be immediately below
   the function prototype, as otherwise it will rename it.  So, move
   get_pfnblock_flags_mask() description to the right place.

3) Make invalidate_mapping_pagevec() to also follow the expected
   kernel-doc format.

While here, fix a few minor English syntax issues, as suggested
by Matthew:
	will used -> will be used
	similar with -> similar to

Link: https://lkml.kernel.org/r/80e85dddc92d333bc2159ee8a2294921612e8745.1605521731.git.mchehab+huawei@kernel.orgSigned-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Suggested-by: Mattew Wilcox <willy@infradead.org>	[English fixes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

From the beginning, the zram block device always enabled CRYPTO_LZO,
since lzo-rle is hardcoded as the fallback compression algorithm.  As a
consequence, on systems where another compression algorithm is chosen
(e.g.  CRYPTO_ZSTD), the lzo kernel module becomes unused, while still
having to be built/loaded.

This patch removes the hardcoded lzo-rle dependency and allows the user
to select the default compression algorithm for zram at build time.  The
previous behaviour is kept, as the default algorithm is still lzo-rle.

Link: https://lkml.kernel.org/r/20201207121245.50529-1-rsalvaterra@gmail.comSigned-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, zram supports the stat via /sys/block/zram/mm_stat to represent
how many of incompressible pages are stored at the moment but it couldn't
show how many times incompressible pages were wrote down since zram set
up.  It's also good indication to see how zram is effective in the system.

Link: https://lkml.kernel.org/r/20201130201907.1284910-1-minchan@kernel.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is demand to writeback specific process pages to backing store
instead of all idles pages in the system due to storage wear out concerns
and to launching latency of apps which are most of the time idle but are
critical for resume latency.

This patch extends the writeback knob to support a specific page
writeback.

Link: https://lkml.kernel.org/r/20201020190506.3758660-1-minchan@kernel.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pointer iov_r is being initialized with a value that is never read and
it is being updated later with a new value.  The initialization is
redundant and can be removed.

Link: https://lkml.kernel.org/r/20201102120614.694917-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Rework the list_add code to make it more readable and simple.

Link: https://lkml.kernel.org/r/20201015130107.65195-1-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>