- 14 Dec, 2020 1 commit
-
-
Arnd Bergmann authored
gcc -Warray-bounds warns about a serious bug in cyapa_pip_retrieve_data_structure: drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop': include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds] 40 | *((__le16 *)p) = cpu_to_le16(val); drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd' 569 | } __packed cmd; | ^~~ Apparently the '-2' was added to the pointer instead of the value, writing garbage into the stack next to this variable. Fixes: c2c06c41 ("Input: cyapa - add gen6 device module support") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026161332.3708389-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 Dec, 2020 4 commits
-
-
Nemo Han authored
Add new compatible strings and match data to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by:
Nemo Han <nemo.han@unisoc.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201117034949.47877-2-zhang.lyra@gmail.comSigned-off-by:
-
Chunyan Zhang authored
Add new compatible strings to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201117034949.47877-4-zhang.lyra@gmail.comSigned-off-by:
-
Chunyan Zhang authored
Convert the sprd sc27xx vibrator binding to DT schema using json-schema. Signed-off-by:
-
Stefan Riedmueller authored
Make use of generic touchscreen_properties structure to add axis inversion and swapping capabilities. It's configurable via devicetree properties: touchscreen-inverted-x touchscreen-inverted-y touchscreen-swapped-x-y Signed-off-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Link: https://lore.kernel.org/r/20200922093903.157232-1-s.riedmueller@phytec.deSigned-off-by:
-
- 11 Dec, 2020 16 commits
-
-
Dmitry Torokhov authored
If device is set up as a wakeup source, I2C core configures the interrupt line as wake IRQ and PM core automatically configures it for waking up the system on system suspend transition, so we do not have to explicitly call enable_irq_wake() and disable_irq_wake() in suspend/resume. Link: https://lore.kernel.org/r/20201120073920.3214492-2-dmitry.torokhov@gmail.comSigned-off-by:
-
Dmitry Torokhov authored
We should not be configuring the controller as a wakeup source in the driver, but rather rely on I2C core to mark it as such by either instantiating as I2C_CLIENT_WAKEUP or specifying "wakeup-source" device property. Link: https://lore.kernel.org/r/20201120073920.3214492-1-dmitry.torokhov@gmail.comSigned-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085032.2598-1-zhengyongjun3@huawei.comSigned-off-by:
-
Zheng Yongjun authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
-
Roy Im authored
Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Signed-off-by:
Roy Im <roy.im.opensource@diasemi.com> Reviewed-by: Jes Sorensen <Jes.Sorensen@gmail.com>. Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.comSigned-off-by:
-
Roy Im authored
Add device tree binding information for DA7280 haptic driver. Example bindings for DA7280 are added. Signed-off-by:
-
Roy Im authored
This patch adds the da7280 bindings doc and driver to the Dialog Semiconductor support list. Signed-off-by:
-
jingle.wu authored
There are some version of Elan trackpads that send incorrect data when in SMbus mode, unless they are switched to use 0x5f reports instead of standard 0x5e. This patch implements querying device to retrieve chips identifying data, and switching it, when needed to the alternative report. Signed-off-by:
Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071531.32413-1-jingle.wu@emc.com.twSigned-off-by:
-
Jingle Wu authored
The 0x5F is a new trackpoint report type used by some modules. Signed-off-by:
-
Michał Mirosław authored
Add information found in downstream kernels, to make the code less magic. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
-
Zheng Yongjun authored
Simplify the return expression. Signed-off-by:
-
Anson Huang authored
Add COMPILE_TEST support to imx_keypad driver for better compile testing coverage. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1583137573-16628-1-git-send-email-Anson.Huang@nxp.comSigned-off-by:
-
Sergiu Cuciurean authored
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd27 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by:
Sergiu Cuciurean <sergiu.cuciurean@analog.com> Tested-by:
Ronald Tschalär <ronald@innovation.ch> Reviewed-by:
-
Sergiu Cuciurean authored
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd27 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by:
-
Sergiu Cuciurean authored
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd27 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by:
-
Dmitry Torokhov authored
Instead of special-casing retrieval of number of X/Y electrodes based on the firmware, let's select default values and mark registers as non-existent on firmwares that do not support this operation. Also mark "report rate" register as non-existent for generic firmwares as having it set to 0 does not make sense. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Simon Budig <simon.budig@kernelconcepts.de> Link: https://lore.kernel.org/r/X9FZFs3NZADoIhhH@google.comSigned-off-by:
-
- 10 Dec, 2020 7 commits
-
-
Stephan Gerhold authored
The Samsung touchkey controllers are often used with external pull-up for the interrupt line and the I2C lines, so we might need to enable a regulator to bring the lines into usable state. Otherwise, this might cause spurious interrupts and reading from I2C will fail. Implement support for a "vddio-supply" that is enabled by the tm2-touchkey driver so that the regulator gets enabled when needed. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201203131242.44397-3-stephan@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
The Samsung touchkey controllers are often used with external pull-up for the interrupt line and the I2C lines, so we might need to enable a regulator to bring the lines into usable state. Otherwise, this might cause spurious interrupts and reading from I2C will fail. Document support for a "vddio-supply" that is enabled by the tm2-touchkey driver so that the regulator gets enabled when needed. Signed-off-by:
-
Stephan Gerhold authored
Convert the device tree bindings for tm2-touchkey to the YAML format. While we're at it, clarify the descriptions a bit to make it clear that this driver can be used for many different MCUs that all implement a similar I2C protocol. Depending on the MCU the voltage requirements may be different, on some devices the controller uses 2.2V, 2.8V or even 3.3V for vcc-supply instead of 1.8V. Signed-off-by:
-
Fuqian Huang authored
devm_add_action_or_reset() is introduced as a helper function which internally calls devm_add_action(). If devm_add_action() fails then it will execute the action mentioned and return the error code. This reduce source code size (avoid writing the action twice) and reduce the likelyhood of bugs. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/linux-input/20190708123323.11943-1-huangfq.daxian@gmail.comSigned-off-by:
-
Lubomir Rintel authored
This adds support for the power button attached to the Embedded Controller on a Dell Wyse 3020 "Ariel" board. The Embedded Controller's SPI interface is actually capable sending and receiving the PS/2 keyboard and mouse protocol data, which looks like a good fit for a serio driver. Howerver, I don't know of any machines where this is actually used. My board only has a single power button and no way to connect an actual keyboard or a mouse. Using the atkbd driver with serio would be an overkill and would be inconvenient for the userspace. Therefore this driver registers an input device that is only capable of reporting the power button presses and releases. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.skSigned-off-by:
-
Lubomir Rintel authored
Add binding document for the Dell Wyse 3020 a.k.a. "Ariel" Power Button. Signed-off-by:
-
Dmitry Torokhov authored
The driver has its own HID descriptor parsing code, that had and still has several issues discovered by syzbot and other tools. Ideally we should move the driver over to the HID subsystem, so that it uses proven parsing code. However the devices in question are EOL, and GTCO is not willing to extend resources for that, so let's simply remove the driver. Note that our HID support has greatly improved over the last 10 years, we may also consider reverting 6f8d9e26 ("hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School Products to blacklist") and see if GTCO devices actually work with normal HID drivers. Link: https://lore.kernel.org/r/X8wbBtO5KidME17K@google.comSigned-off-by:
-
- 04 Dec, 2020 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in the Kconfig help text. Fix it by replacing "theses" with "these". Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201204193635.1152241-1-colin.king@canonical.comSigned-off-by:
-
- 03 Dec, 2020 5 commits
-
-
Andrzej Pietrasiewicz authored
Document inhibiting input devices and its relation to being a wakeup source. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200617101822.8558-1-andrzej.p@collabora.comSigned-off-by:
-
Patrik Fimml authored
Userspace might want to implement a policy to temporarily disregard input from certain devices, including not treating them as wakeup sources. An example use case is a laptop, whose keyboard can be folded under the screen to create tablet-like experience. The user then must hold the laptop in such a way that it is difficult to avoid pressing the keyboard keys. It is therefore desirable to temporarily disregard input from the keyboard, until it is folded back. This obviously is a policy which should be kept out of the kernel, but the kernel must provide suitable means to implement such a policy. This patch adds a sysfs interface for exactly this purpose. To implement the said interface it adds an "inhibited" property to struct input_dev, and effectively creates four states a device can be in: closed uninhibited, closed inhibited, open uninhibited, open inhibited. It also defers calling driver's ->open() and ->close() to until they are actually needed, e.g. it makes no sense to prepare the underlying device for generating events (->open()) if the device is inhibited. uninhibit closed <------------ closed uninhibited ------------> inhibited | ^ inhibit | ^ 1st | | 1st | | open | | open | | | | | | | | last | | last | | close | | close v | uninhibit v | open <------------ open uninhibited ------------> inhibited The top inhibit/uninhibit transition happens when users == 0. The bottom inhibit/uninhibit transition happens when users > 0. The left open/close transition happens when !inhibited. The right open/close transition happens when inhibited. Due to all transitions being serialized with dev->mutex, it is impossible to have "diagonal" transitions between closed uninhibited and open inhibited or between open uninhibited and closed inhibited. No new callbacks are added to drivers, because their open() and close() serve exactly the purpose to tell the driver to start/stop providing events to the input core. Consequently, open() and close() - if provided - are called in both inhibit and uninhibit paths. Signed-off-by:Patrik Fimml <patrikf@chromium.org> Co-developed-by:
-
Andrzej Pietrasiewicz authored
Use the newly added helper in relevant input drivers. Signed-off-by:
-
Andrzej Pietrasiewicz authored
A helper function for drivers to decide if the device is used or not. A lockdep check is introduced as inspecting ->users should be done under input device's mutex. Signed-off-by:
-
Dmitry Torokhov authored
Marking main interrupt as wakeup interrupt in probe allows us to drop custom suspend/resume methods whose only purpose was to configure interrupt for waking up the system. Signed-off-by:
-
- 02 Dec, 2020 1 commit
-
-
Dmitry Torokhov authored
Now that normal input devices support polling mode, and all users of input_polled_dev API have been converted, we can remove it. Signed-off-by:
-
- 23 Nov, 2020 3 commits
-
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* Fall through */ comment with the new pseudo-keyword macro fallthrough. Notice that Clang doesn't recognize /* Fall through */ comments as implicit fall-through markings. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/d2944854e3e118b837755abf4cbdb497662001b7.1605896060.git.gustavoars@kernel.orgSigned-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Signed-off-by:
-
Zhang Qilong authored
In omap4_keypad_probe, the patch fix several bugs. 1) pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak. 2) In err_unmap, forget to disable runtime of device, pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced. 3) In err_pm_disable, it will call pm_runtime_put_sync twice not one time. To fix this we factor out code reading revision and disabling touchpad, and drop PM reference once we are done talking to the device. Fixes: f77621cc ("Input: omap-keypad - dynamically handle register offsets") Fixes: 5ad567ff ("Input: omap4-keypad - wire up runtime PM handling") Signed-off-by:Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201120133918.2559681-1-zhangqilong3@huawei.comSigned-off-by:
-
- 20 Nov, 2020 2 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'cmd' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'in1' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out1' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out2' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out3' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out4' not described in 'VMMOUSE_CMD' Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-16-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'keyboard' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'touchpad' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'tp_info' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'tp_info_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'init_mt_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'capsl_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'bl_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'data' not described in 'message' Signed-off-by:
-
