Resolve the following warning reported by checkpatch:

WARNING: Unnecessary ftrace-like logging - prefer using ftrace
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Resolve the following warning reported by checkpatch.pl:

WARNING: Missing or malformed SPDX-License-Identifier tag in line 1

The patch also removes some license info made redundant by the addition
of the SPDX tag.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The patch gets rid of magic numbers replacing them with appropriate
macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Replace opencoded masking and shifting, with BIT(), GENMASK(),
FIELD_GET() and FIELD_PREP() macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The patch moves the bitfields of the PCR register near the macro that
defines its offset, just like for all the other registers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The previous setting did not take into account the CSTN mode.
For the H_WAIT_2 bitfield (bits 0-7) of the LCDC Horizontal Configuration
Register (LCDCR), the IMX25RM manual states that:

In TFT mode, it specifies the number of SCLK periods between the end of
HSYNC and the beginning of OE signal, and the total delay time equals
(H_WAIT_2 + 3) of SCLK periods.
In CSTN mode, it specifies the number of SCLK periods between the end of
HSYNC and the first display data in each line, and the total delay time
equals (H_WAIT_2 + 2) of SCLK periods.

The patch handles both cases.

Fixes: 4e47382f ("fbdev: imxfb: warn about invalid left/right margin")
Fixes: 7e8549bc ("imxfb: Fix margin settings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull s390 updates from Alexander Gordeev:

 - Add machine variable capacity information to /proc/sysinfo.

 - Limit the waste of page tables and always align vmalloc area size and
   base address on segment boundary.

 - Fix a memory leak when an attempt to register interruption sub class
   (ISC) for the adjunct-processor (AP) guest failed.

 - Reset response code AP_RESPONSE_INVALID_GISA to understandable by
   guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
   interruption sub class (ISC) registration attempt.

 - Improve reaction to adjunct-processor (AP)
   AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
   on behalf of a guest.

 - Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
   queue device bound to the vfio_ap device driver when the mediated
   device is attached to a guest, but the queue device is not passed
   through.

 - Rework struct ap_card to hold the whole adjunct-processor (AP) card
   hardware information. As result, all the ugly bit checks are replaced
   by simple evaluations of the required bit fields.

 - Improve handling of some weird scenarios between service element (SE)
   host and SE guest with adjunct-processor (AP) pass-through support.

 - Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
   the previous value of the to be changed control register. This is
   useful if a bit is only changed temporarily and the previous content
   needs to be restored.

 - The kernel starts with machine checks disabled and is expected to
   enable it once trap_init() is called. However the implementation
   allows machine checks early. Consistently enable it in trap_init()
   only.

 - local_mcck_disable() and local_mcck_enable() assume that machine
   checks are always enabled. Instead implement and use
   local_mcck_save() and local_mcck_restore() to disable machine checks
   and restore the previous state.

 - Modification of floating point control (FPC) register of a traced
   process using ptrace interface may lead to corruption of the FPC
   register of the tracing process. Fix this.

 - kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
   control (FPC) register in vCPU, but may lead to corruption of the FPC
   register of the host process. Fix this.

 - Use READ_ONCE() to read a vCPU floating point register value from the
   memory mapped area. This avoids that, depending on code generation, a
   different value is tested for validity than the one that is used.

 - Get rid of test_fp_ctl(), since it is quite subtle to use it
   correctly. Instead copy a new floating point control register value
   into its save area and test the validity of the new value when
   loading it.

 - Remove superfluous save_fpu_regs() call.

 - Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
   provide the vector facility since many years and the need to make the
   task structure size dependent on the vector facility does not exist.

 - Remove the "novx" kernel command line option, as the vector code runs
   without any problems since many years.

 - Add the vector facility to the z13 architecture level set (ALS). All
   hypervisors support the vector facility since many years. This allows
   compile time optimizations of the kernel.

 - Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
   result, the compiled code will have less runtime checks and less
   code.

 - Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.

 - Convert the struct subchannel spinlock from pointer to member.

* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
  Revert "s390: update defconfigs"
  s390/cio: make sch->lock spinlock pointer a member
  s390: update defconfigs
  s390/mm: convert pgste locking functions to C
  s390/fpu: get rid of MACHINE_HAS_VX
  s390/als: add vector facility to z13 architecture level set
  s390/fpu: remove "novx" option
  s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
  KVM: s390: remove superfluous save_fpu_regs() call
  s390/fpu: get rid of test_fp_ctl()
  KVM: s390: use READ_ONCE() to read fpc register value
  KVM: s390: fix setting of fpc register
  s390/ptrace: handle setting of fpc register correctly
  s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
  s390/nmi: consistently enable machine checks in trap_init()
  s390/ctlreg: return old register contents when changing bits
  s390/ap: handle outband SE bind state change
  s390/ap: store TAPQ hwinfo in struct ap_card
  s390/vfio-ap: fix sysfs status attribute for AP queue devices
  s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
  ...

Pull asm-generic cleanups from Arnd Bergmann:
 "A series from Baoquan He cleans up the asm-generic/io.h to remove the
  ioremap_uc() definition from everything except x86, which still needs
  it for pre-PAT systems. This series notably contains a patch from
  Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
  other architecture does, enabling future cleanups.

  Some of my own patches fix -Wmissing-prototype warnings in
  architecture specific code across several architectures. This is now
  needed as the warning is enabled by default. There are still some
  remaining warnings in minor platforms, but the series should catch
  most of the widely used ones make them more consistent with one
  another.

  David McKay fixes a bug in __generic_cmpxchg_local() when this is used
  on 64-bit architectures. This could currently only affect parisc64 and
  sparc64.

  Additional cleanups address from Linus Walleij, Uwe Kleine-König,
  Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
  between architectures"

* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: Fix 32 bit __generic_cmpxchg_local
  Hexagon: Make pfn accessors statics inlines
  ARC: mm: Make virt_to_pfn() a static inline
  mips: remove extraneous asm-generic/iomap.h include
  sparc: Use $(kecho) to announce kernel images being ready
  arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
  csky: fix arch_jump_label_transform_static override
  arch: add do_page_fault prototypes
  arch: add missing prepare_ftrace_return() prototypes
  arch: vdso: consolidate gettime prototypes
  arch: include linux/cpu.h for trap_init() prototype
  arch: fix asm-offsets.c building with -Wmissing-prototypes
  arch: consolidate arch_irq_work_raise prototypes
  hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
  asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
  mips: io: remove duplicated codes
  arch/*/io.h: remove ioremap_uc in some architectures
  mips: add <asm-generic/io.h> including

Pull module updates from Luis Chamberlain:
 "Just one cleanup and one documentation improvement change. No
  functional changes"

* tag 'modules-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  kernel/module: improve documentation for try_module_get()
  module: Remove redundant TASK_UNINTERRUPTIBLE

Pull sysctl updates from Luis Chamberlain:
 "To help make the move of sysctls out of kernel/sysctl.c not incur a
  size penalty sysctl has been changed to allow us to not require the
  sentinel, the final empty element on the sysctl array. Joel Granados
  has been doing all this work.

  In the v6.6 kernel we got the major infrastructure changes required to
  support this. For v6.7 we had all arch/ and drivers/ modified to
  remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
  directory only.

  The kernel/ directory is left but we'll save that for v6.9-rc1 as
  those patches are still being reviewed. After that we then can expect
  also the removal of the no longer needed check for procname == NULL.

  Let us recap the purpose of this work:

   - this helps reduce the overall build time size of the kernel and run
     time memory consumed by the kernel by about ~64 bytes per array

   - the extra 64-byte penalty is no longer inncurred now when we move
     sysctls out from kernel/sysctl.c to their own files

  Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
  see further work by Thomas Weißschuh with the constificatin of the
  struct ctl_table.

  Due to Joel Granados's work, and to help bring in new blood, I have
  suggested for him to become a maintainer and he's accepted. So for
  v6.9-rc1 I look forward to seeing him sent you a pull request for
  further sysctl changes. This also removes Iurii Zaikin as a maintainer
  as he has moved on to other projects and has had no time to help at
  all"

* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: remove struct ctl_path
  sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
  coda: Remove the now superfluous sentinel elements from ctl_table array
  sysctl: Remove the now superfluous sentinel elements from ctl_table array
  fs: Remove the now superfluous sentinel elements from ctl_table array
  cachefiles: Remove the now superfluous sentinel element from ctl_table array
  sysclt: Clarify the results of selftest run
  sysctl: Add a selftest for handling empty dirs
  sysctl: Fix out of bounds access for empty sysctl registers
  MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
  MAINTAINERS: remove Iurii Zaikin from proc sysctl

Pull header cleanups from Kent Overstreet:
 "The goal is to get sched.h down to a type only header, so the main
  thing happening in this patchset is splitting out various _types.h
  headers and dependency fixups, as well as moving some things out of
  sched.h to better locations.

  This is prep work for the memory allocation profiling patchset which
  adds new sched.h interdepencencies"

* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
  Kill sched.h dependency on rcupdate.h
  kill unnecessary thread_info.h include
  Kill unnecessary kernel.h include
  preempt.h: Kill dependency on list.h
  rseq: Split out rseq.h from sched.h
  LoongArch: signal.c: add header file to fix build error
  restart_block: Trim includes
  lockdep: move held_lock to lockdep_types.h
  sem: Split out sem_types.h
  uidgid: Split out uidgid_types.h
  seccomp: Split out seccomp_types.h
  refcount: Split out refcount_types.h
  uapi/linux/resource.h: fix include
  x86/signal: kill dependency on time.h
  syscall_user_dispatch.h: split out *_types.h
  mm_types_task.h: Trim dependencies
  Split out irqflags_types.h
  ipc: Kill bogus dependency on spinlock.h
  shm: Slim down dependencies
  workqueue: Split out workqueue_types.h
  ...

Pull bcachefs updates from Kent Overstreet:

 - btree write buffer rewrite: instead of adding keys to the btree write
   buffer at transaction commit time, we now journal them with a
   different journal entry type and copy them from the journal to the
   write buffer just prior to journal write.

   This reduces the number of atomic operations on shared cachelines in
   the transaction commit path and is a signicant performance
   improvement on some workloads: multithreaded 4k random writes went
   from ~650k iops to ~850k iops.

 - Bring back optimistic spinning for six locks: the new implementation
   doesn't use osq locks; instead we add to the lock waitlist as normal,
   and then spin on the lock_acquired bit in the waitlist entry, _not_
   the lock itself.

 - New ioctls:

    - BCH_IOCTL_DEV_USAGE_V2, which allows for new data types

    - BCH_IOCTL_OFFLINE_FSCK, which runs the kernel implementation of
      fsck but without mounting: useful for transparently using the
      kernel version of fsck from 'bcachefs fsck' when the kernel
      version is a better match for the on disk filesystem.

    - BCH_IOCTL_ONLINE_FSCK: online fsck. Not all passes are supported
      yet, but the passes that are supported are fully featured - errors
      may be corrected as normal.

   The new ioctls use the new 'thread_with_file' abstraction for kicking
   off a kthread that's tied to a file descriptor returned to userspace
   via the ioctl.

 - btree_paths within a btree_trans are now dynamically growable,
   instead of being limited to 64. This is important for the
   check_directory_structure phase of fsck, and also fixes some issues
   we were having with btree path overflow in the reflink btree.

 - Trigger refactoring; prep work for the upcoming disk space accounting
   rewrite

 - Numerous bugfixes :)

* tag 'bcachefs-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (226 commits)
  bcachefs: eytzinger0_find() search should be const
  bcachefs: move "ptrs not changing" optimization to bch2_trigger_extent()
  bcachefs: fix simulateously upgrading & downgrading
  bcachefs: Restart recovery passes more reliably
  bcachefs: bch2_dump_bset() doesn't choke on u64s == 0
  bcachefs: improve checksum error messages
  bcachefs: improve validate_bset_keys()
  bcachefs: print sb magic when relevant
  bcachefs: __bch2_sb_field_to_text()
  bcachefs: %pg is banished
  bcachefs: Improve would_deadlock trace event
  bcachefs: fsck_err()s don't need to manually check c->sb.version anymore
  bcachefs: Upgrades now specify errors to fix, like downgrades
  bcachefs: no thread_with_file in userspace
  bcachefs: Don't autofix errors we can't fix
  bcachefs: add missing bch2_latency_acct() call
  bcachefs: increase max_active on io_complete_wq
  bcachefs: add time_stats for btree_node_read_done()
  bcachefs: don't clear accessed bit in btree node fill
  bcachefs: Add an option to control btree node prefetching
  ...

Pull smb client fixes from Steve French:
 "Various smb client fixes, most related to better handling special file
  types:

   - Improve handling of special file types:
      - performance improvement (better compounding and better caching
        of readdir entries that are reparse points)
      - extend support for creating special files (sockets, fifos,
        block/char devices)
      - fix renaming and hardlinking of reparse points
      - extend support for creating symlinks with IO_REPARSE_TAG_SYMLINK

   - Multichannel logging improvement

   - Exception handling fix

   - Minor cleanups"

* tag 'v6.8-rc-part1-smb-client' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: remove unneeded return statement
  cifs: make cifs_chan_update_iface() a void function
  cifs: delete unnecessary NULL checks in cifs_chan_update_iface()
  cifs: get rid of dup length check in parse_reparse_point()
  smb: client: stop revalidating reparse points unnecessarily
  cifs: Pass unbyteswapped eof value into SMB2_set_eof()
  smb3: Improve exception handling in allocate_mr_list()
  cifs: fix in logging in cifs_chan_update_iface
  smb: client: handle special files and symlinks in SMB3 POSIX
  smb: client: cleanup smb2_query_reparse_point()
  smb: client: allow creating symlinks via reparse points
  smb: client: fix hardlinking of reparse points
  smb: client: fix renaming of reparse points
  smb: client: optimise reparse point querying
  smb: client: allow creating special files via reparse points
  smb: client: extend smb2_compound_op() to accept more commands
  smb: client: Fix minor whitespace errors and warnings

Pull nfs client updates from Anna Schumaker:
 "New Features:
   - Always ask for type with READDIR
   - Remove nfs_writepage()

  Bugfixes:
   - Fix a suspicious RCU usage warning
   - Fix a blocklayoutdriver reference leak
   - Fix the block driver's calculation of layoutget size
   - Fix handling NFS4ERR_RETURNCONFLICT
   - Fix _xprt_switch_find_current_entry()
   - Fix v4.1 backchannel request timeouts
   - Don't add zero-length pnfs block devices
   - Use the parent cred in nfs_access_login_time()

  Cleanups:
   - A few improvements when dealing with referring calls from the
     server
   - Clean up various unused variables, struct fields, and function
     calls
   - Various tracepoint improvements"

* tag 'nfs-for-6.8-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (21 commits)
  NFSv4.1: Use the nfs_client's rpc timeouts for backchannel
  SUNRPC: Fixup v4.1 backchannel request timeouts
  rpc_pipefs: Replace one label in bl_resolve_deviceid()
  nfs: Remove writepage
  NFS: drop unused nfs_direct_req bytes_left
  pNFS: Fix the pnfs block driver's calculation of layoutget size
  nfs: print fileid in lookup tracepoints
  nfs: rename the nfs_async_rename_done tracepoint
  nfs: add new tracepoint at nfs4 revalidate entry point
  SUNRPC: fix _xprt_switch_find_current_entry logic
  NFSv4.1/pnfs: Ensure we handle the error NFS4ERR_RETURNCONFLICT
  NFSv4.1: if referring calls are complete, trust the stateid argument
  NFSv4: Track the number of referring calls in struct cb_process_state
  NFS: Use parent's objective cred in nfs_access_login_time()
  NFSv4: Always ask for type with READDIR
  pnfs/blocklayout: Don't add zero-length pnfs_block_dev
  blocklayoutdriver: Fix reference leak of pnfs_device_node
  SUNRPC: Fix a suspicious RCU usage warning
  SUNRPC: Create a helper function for accessing the rpc_clnt's xprt_switch
  SUNRPC: Remove unused function rpc_clnt_xprt_switch_put()
  ...

Pull ext4 updates from Ted Ts'o:
 "Various ext4 bug fixes and cleanups. The fixes are mostly in the
  fstrim and mballoc code paths.

  Also enable dioread_nolock in the case where the block size is less
  than the page size (dioread_nolock has been default in the bs == ps
  case for quite some time)"

* tag 'ext4_for_linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix inconsistent between segment fstrim and full fstrim
  ext4: fallback to complex scan if aligned scan doesn't work
  ext4: convert ext4_da_do_write_end() to take a folio
  ext4: allow for the last group to be marked as trimmed
  ext4: move ext4_check_bdev_write_error() into nojournal mode
  jbd2: abort journal when detecting metadata writeback error of fs dev
  jbd2: remove unused 'JBD2_CHECKPOINT_IO_ERROR' and 'j_atomic_flags'
  jbd2: replace journal state flag by checking errseq
  jbd2: add errseq to detect client fs's bdev writeback error
  ext4: improving calculation of 'fe_{len|start}' in mb_find_extent()
  ext4: clarify handling of unwritten bh in __ext4_block_zero_page_range()
  ext4: treat end of range as exclusive in ext4_zero_range()
  ext4: enable dioread_nolock as default for bs < ps case
  ext4: delete redundant calculations in ext4_mb_get_buddy_page_lock()
  ext4: reduce unnecessary memory allocation in alloc_flex_gd()
  ext4: avoid online resizing failures due to oversized flex bg
  ext4: remove unnecessary check from alloc_flex_gd()
  ext4: unify the type of flexbg_size to unsigned int

Pull unicode updates from Gabriel Krisman Bertazi:
 "Other than the update to MAINTAINERS, this PR has only a fix to stop
  ecryptfs from inadvertently mounting case-insensitive filesystems that
  it cannot handle, which would otherwise caused post-mount failures"

* tag 'unicode-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
  MAINTAINERS: update unicode maintainer e-mail address
  ecryptfs: Reject casefold directory inodes

Fix the size check added to dns_resolver_preparse() for the V1 server-list
header so that it doesn't give EINVAL if the size supplied is the same as
the size of the header struct (which should be valid).

This can be tested with:

        echo -n -e '\0\0\01\xff\0\0' | keyctl padd dns_resolver desc @p

which will give "add_key: Invalid argument" without this fix.

Fixes: 1997b3cb ("keys, dns: Fix missing size check of V1 server-list header")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/ZZ4fyY4r3rqgZL+4@xpf.sh.intel.com/Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull crypto updates from Herbert Xu:
 "API:
   - Add incremental lskcipher/skcipher processing

  Algorithms:
   - Remove SHA1 from drbg
   - Remove CFB and OFB

  Drivers:
   - Add comp high perf mode configuration in hisilicon/zip
   - Add support for 420xx devices in qat
   - Add IAA Compression Accelerator driver"

* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
  crypto: iaa - Account for cpu-less numa nodes
  crypto: scomp - fix req->dst buffer overflow
  crypto: sahara - add support for crypto_engine
  crypto: sahara - remove error message for bad aes request size
  crypto: sahara - remove unnecessary NULL assignments
  crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
  crypto: sahara - use dev_err_probe()
  crypto: sahara - use devm_clk_get_enabled()
  crypto: sahara - use BIT() macro
  crypto: sahara - clean up macro indentation
  crypto: sahara - do not resize req->src when doing hash operations
  crypto: sahara - fix processing hash requests with req->nbytes < sg->length
  crypto: sahara - improve error handling in sahara_sha_process()
  crypto: sahara - fix wait_for_completion_timeout() error handling
  crypto: sahara - fix ahash reqsize
  crypto: sahara - handle zero-length aes requests
  crypto: skcipher - remove excess kerneldoc members
  crypto: shash - remove excess kerneldoc members
  crypto: qat - generate dynamically arbiter mappings
  crypto: qat - add support for ring pair level telemetry
  ...

Pull tpm updates from Jarkko Sakkinen:
 "Just a couple fixes and no new features"

* tag 'tpmdd-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: cr50: fix kernel-doc warning and spelling
  tpm: nuvoton: Use i2c_get_match_data()

Pull hardening updates from Kees Cook:

 - Introduce the param_unknown_fn type and other clean ups (Andy
   Shevchenko)

 - Various __counted_by annotations (Christophe JAILLET, Gustavo A. R.
   Silva, Kees Cook)

 - Add KFENCE test to LKDTM (Stephen Boyd)

 - Various strncpy() refactorings (Justin Stitt)

 - Fix qnx4 to avoid writing into the smaller of two overlapping buffers

 - Various strlcpy() refactorings

* tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  qnx4: Use get_directory_fname() in qnx4_match()
  qnx4: Extract dir entry filename processing into helper
  atags_proc: Add __counted_by for struct buffer and use struct_size()
  tracing/uprobe: Replace strlcpy() with strscpy()
  params: Fix multi-line comment style
  params: Sort headers
  params: Use size_add() for kmalloc()
  params: Do not go over the limit when getting the string length
  params: Introduce the param_unknown_fn type
  lkdtm: Add kfence read after free crash type
  nvme-fc: replace deprecated strncpy with strscpy
  nvdimm/btt: replace deprecated strncpy with strscpy
  nvme-fabrics: replace deprecated strncpy with strscpy
  drm/modes: replace deprecated strncpy with strscpy_pad
  afs: Add __counted_by for struct afs_acl and use struct_size()
  VMCI: Annotate struct vmci_handle_arr with __counted_by
  i40e: Annotate struct i40e_qvlist_info with __counted_by
  HID: uhid: replace deprecated strncpy with strscpy
  samples: Replace strlcpy() with strscpy()
  SUNRPC: Replace strlcpy() with strscpy()

Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Currently in case the goal length is a multiple of stripe size we use
ext4_mb_scan_aligned() to find the stripe size aligned physical blocks.
In case we are not able to find any, we again go back to calling
ext4_mb_choose_next_group() to search for a different suitable block
group. However, since the linear search always begins from the start,
most of the times we end up with the same BG and the cycle continues.

With large fliesystems, the CPU can be stuck in this loop for hours
which can slow down the whole system. Hence, until we figure out a
better way to continue the search (rather than starting from beginning)
in ext4_mb_choose_next_group(), lets just fallback to
ext4_mb_complex_scan_group() in case aligned scan fails, as it is much
more likely to find the needed blocks.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ee033f6dfa0a7f2934437008a909c3788233950f.1702455010.git.ojaswin@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

There's nothing page-specific happening in ext4_da_do_write_end();
it's merely used for its refcount & lock, both of which are folio
properties.  Saves four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231214053035.1018876-1-willy@infradead.orgSigned-off-by: Theodore Ts'o <tytso@mit.edu>

The ext4 filesystem tracks the trim status of blocks at the group
level.  When an entire group has been trimmed then it is marked as
such and subsequent trim invocations with the same minimum trim size
will not be attempted on that group unless it is marked as able to be
trimmed again such as when a block is freed.

Currently the last group can't be marked as trimmed due to incorrect
logic in ext4_last_grp_cluster(). ext4_last_grp_cluster() is supposed
to return the zero based index of the last cluster in a group. This is
then used by ext4_try_to_trim_range() to determine if the trim
operation spans the entire group and as such if the trim status of the
group should be recorded.

ext4_last_grp_cluster() takes a 0 based group index, thus the valid
values for grp are 0..(ext4_get_groups_count - 1). Any group index
less than (ext4_get_groups_count - 1) is not the last group and must
have EXT4_CLUSTERS_PER_GROUP(sb) clusters. For the last group we need
to calculate the number of clusters based on the number of blocks in
the group. Finally subtract 1 from the number of clusters as zero
based indexing is expected.  Rearrange the function slightly to make
it clear what we are calculating and returning.

Reproducer:
// Create file system where the last group has fewer blocks than
// blocks per group
$ mkfs.ext4 -b 4096 -g 8192 /dev/nvme0n1 8191
$ mount /dev/nvme0n1 /mnt

Before Patch:
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group not marked as trimmed so second invocation still discards blocks
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed

After Patch:
fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group marked as trimmed so second invocation DOESN'T discard any blocks
fstrim -v /mnt
/mnt: 0 B (0 bytes) trimmed

Fixes: 45e4ab32 ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Cc:  <stable@vger.kernel.org> # 4.19+
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213051635.37731-1-surajjs@amazon.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull pstore updates from Kees Cook:

 - Do not allow misconfigured ECC sizes (Sergey Shtylyov)

 - Allow for odd number of CPUs (Weichen Chen)

 - Refactor error handling to use cleanup.h

* tag 'pstore-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: inode: Use cleanup.h for struct pstore_private
  pstore: inode: Use __free(pstore_iput) for inode allocations
  pstore: inode: Convert mutex usage to guard(mutex)
  pstore: inode: Convert kfree() usage to __free(kfree)
  pstore: ram_core: fix possible overflow in persistent_ram_init_ecc()
  pstore/ram: Fix crash when setting number of cpus to an odd number

Pull overlayfs updates from Amir Goldstein:
 "This is a very small update with no bug fixes and no new features.

  The larger update of overlayfs for this cycle, the re-factoring of
  overlayfs code into generic backing_file helpers, was already merged
  via Christian.

  Summary:

   - Simplify/clarify some code

     No bug fixes here, just some changes following questions from Al
     about overlayfs code that could be a little more simple to follow.

   - Overlayfs documentation style fixes

     Mainly fixes for ReST formatting suggested by documentation
     developers"

* tag 'ovl-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  overlayfs.rst: fix ReST formatting
  overlayfs.rst: use consistent feature names
  ovl: initialize ovl_copy_up_ctx.destname inside ovl_do_copy_up()
  ovl: remove redundant ofs->indexdir member

Pull erofs updates from Gao Xiang:
 "In this cycle, we'd like to enable basic sub-page compressed data
  support for Android ecosystem (for vendors to try out 16k page size
  with 4k-block images in their compatibility mode) as well as container
  images (so that 4k-block images can be parsed on arm64 cloud servers
  using 64k page size.)

  In addition, there are several bugfixes and cleanups as usual. All
  commits have been in -next for a while and no potential merge conflict
  is observed.

  Summary:

   - Add basic sub-page compressed data support

   - Fix a memory leak on MicroLZMA and DEFLATE compression

   - Fix a rare LZ4 inplace decompression issue on recent x86 CPUs

   - Fix a KASAN issue reported by syzbot around crafted images

   - Some cleanups"

* tag 'erofs-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: make erofs_{err,info}() support NULL sb parameter
  erofs: avoid debugging output for (de)compressed data
  erofs: allow partially filled compressed bvecs
  erofs: enable sub-page compressed block support
  erofs: refine z_erofs_transform_plain() for sub-page block support
  erofs: fix ztailpacking for subpage compressed blocks
  erofs: fix up compacted indexes for block size < 4096
  erofs: record `pclustersize` in bytes instead of pages
  erofs: support I/O submission for sub-page compressed blocks
  erofs: fix lz4 inplace decompression
  erofs: fix memory leak on short-lived bounced pages

Pull fscrypt updates from Eric Biggers:
 "Adjust the timing of the fscrypt keyring destruction, to prepare for
  btrfs's fscrypt support.

  Also document that CephFS supports fscrypt now"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fs: move fscrypt keyring destruction to after ->put_super
  f2fs: move release of block devices to after kill_block_super()
  fscrypt: document that CephFS supports fscrypt now
  fscrypt: update comment for do_remove_key()
  fscrypt.rst: update definition of struct fscrypt_context_v2

Pull nfsd updates from Chuck Lever:
 "The bulk of the patches for this release are clean-ups and minor bug
  fixes.

  There is one significant revert to mention: support for RDMA Read
  operations in the server's RPC-over-RDMA transport implementation has
  been fixed so it waits for Read completion in a way that avoids tying
  up an nfsd thread. This prevents a possible DoS vector if an
  RPC-over-RDMA client should become unresponsive during RDMA Read
  operations.

  As always I am grateful to NFSD contributors, reviewers, and testers"

* tag 'nfsd-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
  nfsd: rename nfsd_last_thread() to nfsd_destroy_serv()
  SUNRPC: discard sv_refcnt, and svc_get/svc_put
  svc: don't hold reference for poolstats, only mutex.
  SUNRPC: remove printk when back channel request not found
  svcrdma: Implement multi-stage Read completion again
  svcrdma: Copy construction of svc_rqst::rq_arg to rdma_read_complete()
  svcrdma: Add back svcxprt_rdma::sc_read_complete_q
  svcrdma: Add back svc_rdma_recv_ctxt::rc_pages
  svcrdma: Clean up comment in svc_rdma_accept()
  svcrdma: Remove queue-shortening warnings
  svcrdma: Remove pointer addresses shown in dprintk()
  svcrdma: Optimize svc_rdma_cc_init()
  svcrdma: De-duplicate completion ID initialization helpers
  svcrdma: Move the svc_rdma_cc_init() call
  svcrdma: Remove struct svc_rdma_read_info
  svcrdma: Update the synopsis of svc_rdma_read_special()
  svcrdma: Update the synopsis of svc_rdma_read_call_chunk()
  svcrdma: Update synopsis of svc_rdma_read_multiple_chunks()
  svcrdma: Update synopsis of svc_rdma_copy_inline_range()
  svcrdma: Update the synopsis of svc_rdma_read_data_item()
  ...

Pull dlm updates from David Teigland:
 "This set cleans up the interface between nfs lockd and dlm, which is
  handling nfs file locking for gfs2 and ocfs2. Very basic lockd
  functionality is fixed, in which the fl owner was using the lockd pid
  instead of the owner value from nfs"

* tag 'dlm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: update format header reflect current format
  dlm: fix format seq ops type 4
  dlm: implement EXPORT_OP_ASYNC_LOCK
  dlm: use FL_SLEEP to determine blocking vs non-blocking
  dlm: use fl_owner from lockd
  dlm: use kernel_connect() and kernel_bind()

Merge tag 'afs-fix-rotation-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull afs updates from David Howells:
 "The majority of the patches are aimed at fixing and improving the AFS
  filesystem's rotation over server IP addresses, but there are also
  some fixes from Oleg Nesterov for the use of read_seqbegin_or_lock().

   - Fix fileserver probe handling so that the next round of probes
     doesn't break ongoing server/address rotation by clearing all the
     probe result tracking. This could occasionally cause the rotation
     algorithm to drop straight through, give a 'successful' result
     without actually emitting any RPC calls, leaving the reply buffer
     in an undefined state.

     Instead, detach the probe results into a separate struct and
     allocate a new one each time we start probing and update the
     pointer to it. Probes are also sent in order of address preference
     to try and improve the chance that the preferred one will complete
     first.

   - Fix server rotation so that it uses configurable address
     preferences across on the probes that have completed so far than
     ranking them by RTT as the latter doesn't necessarily give the best
     route. The preference list can be altered by writing into
     /proc/net/afs/addr_prefs.

   - Fix the handling of Read-Only (and Backup) volume callbacks as
     there is one per volume, not one per file, so if someone performs a
     command that, say, offlines the volume but doesn't change it, when
     it comes back online we don't spam the server with a status fetch
     for every vnode we're using. Instead, check the Creation timestamp
     in the VolSync record when prompted by a callback break.

   - Handle volume regression (ie. a RW volume being restored from a
     backup) by scrubbing all cache data for that volume. This is
     detected from the VolSync creation timestamp.

   - Adjust abort handling and abort -> error mapping to match better
     with what other AFS clients do.

   - Fix offline and busy volume state handling as they only apply to
     individual server instances and not entire volumes and the rotation
     algorithm should go and look at other servers if available. Also
     make it sleep briefly before each retry if all the volume instances
     are unavailable"

* tag 'afs-fix-rotation-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (40 commits)
  afs: trace: Log afs_make_call(), including server address
  afs: Fix offline and busy message emission
  afs: Fix fileserver rotation
  afs: Overhaul invalidation handling to better support RO volumes
  afs: Parse the VolSync record in the reply of a number of RPC ops
  afs: Don't leave DONTUSE/NEWREPSITE servers out of server list
  afs: Fix comment in afs_do_lookup()
  afs: Apply server breaks to mmap'd files in the call processor
  afs: Move the vnode/volume validity checking code into its own file
  afs: Defer volume record destruction to a workqueue
  afs: Make it possible to find the volumes that are using a server
  afs: Combine the endpoint state bools into a bitmask
  afs: Keep a record of the current fileserver endpoint state
  afs: Dispatch vlserver probes in priority order
  afs: Dispatch fileserver probes in priority order
  afs: Mark address lists with configured priorities
  afs: Provide a way to configure address priorities
  afs: Remove the unimplemented afs_cmp_addr_list()
  afs: Add some more info to /proc/net/afs/servers
  rxrpc: Create a procfile to display outstanding client conn bundles
  ...

Pull jfs updates from David Kleikamp:
 "Stability improvements"

* tag 'jfs-6.8' of github.com:kleikamp/linux-shaggy:
  jfs: Add missing set_freezable() for freezable kthread
  jfs: fix array-index-out-of-bounds in diNewExt
  jfs: fix shift-out-of-bounds in dbJoin
  jfs: fix uaf in jfs_evict_inode
  jfs: fix array-index-out-of-bounds in dbAdjTree
  jfs: fix slab-out-of-bounds Read in dtSearch
  UBSAN: array-index-out-of-bounds in dtSplitRoot
  FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree

Pull gfs2 updates from Andreas Gruenbacher:

 - Add support for non-blocking lookup (MAY_NOT_BLOCK / LOOKUP_RCU)

 - Various minor fixes and cleanups

* tag 'gfs2-v6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix freeze consistency check in log_write_header
  gfs2: Refcounting fix in gfs2_thaw_super
  gfs2: Minor gfs2_{freeze,thaw}_super cleanup
  gfs2: Use wait_event_freezable_timeout() for freezable kthread
  gfs2: Add missing set_freezable() for freezable kthread
  gfs2: Remove use of error flag in journal reads
  gfs2: Lift withdraw check out of gfs2_ail1_empty
  gfs2: Rename gfs2_withdrawn to gfs2_withdrawing_or_withdrawn
  gfs2: Mark withdraws as unlikely
  gfs2: Minor gfs2_ail1_empty cleanup
  gfs2: use is_subdir()
  gfs2: d_obtain_alias(ERR_PTR(...)) will do the right thing
  gfs2: Use GL_NOBLOCK flag for non-blocking lookups
  gfs2: Add GL_NOBLOCK flag
  gfs2: rgrp: fix kernel-doc warnings
  gfs2: fix kernel BUG in gfs2_quota_cleanup
  gfs2: Fix inode_go_instantiate description
  gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump

Pull btrfs updates from David Sterba:
 "There are no exciting changes for users, it's been mostly API
  conversions and some fixes or refactoring.

  The mount API conversion is a base for future improvements that would
  come with VFS. Metadata processing has been converted to folios, not
  yet enabling the large folios but it's one patch away once everything
  gets tested enough.

  Core changes:

   - convert extent buffers to folios:
      - direct API conversion where possible
      - performance can drop by a few percent on metadata heavy
        workloads, the folio sizes are not constant and the calculations
        add up in the item helpers
      - both regular and subpage modes
      - data cannot be converted yet, we need to port that to iomap and
        there are some other generic changes required

   - convert mount to the new API, should not be user visible:
      - options deprecated long time ago have been removed: inode_cache,
        recovery
      - the new logic that splits mount to two phases slightly changes
        timing of device scanning for multi-device filesystems
      - LSM options will now work (like for selinux)

   - convert delayed nodes radix tree to xarray, preserving the
     preload-like logic that still allows to allocate with GFP_NOFS

   - more validation of sysfs value of scrub_speed_max

   - refactor chunk map structure, reduce size and improve performance

   - extent map refactoring, smaller data structures, improved
     performance

   - reduce size of struct extent_io_tree, embedded in several
     structures

   - temporary pages used for compression are cached and attached to a
     shrinker, this may slightly improve performance

   - in zoned mode, remove redirty extent buffer tracking, zeros are
     written in case an out-of-order is detected and proper data are
     written to the actual write pointer

   - cleanups, refactoring, error message improvements, updated tests

   - verify and update branch name or tag

   - remove unwanted text"

* tag 'for-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (89 commits)
  btrfs: pass btrfs_io_geometry into btrfs_max_io_len
  btrfs: pass struct btrfs_io_geometry to set_io_stripe
  btrfs: open code set_io_stripe for RAID56
  btrfs: change block mapping to switch/case in btrfs_map_block
  btrfs: factor out block mapping for single profiles
  btrfs: factor out block mapping for RAID5/6
  btrfs: reduce scope of data_stripes in btrfs_map_block
  btrfs: factor out block mapping for RAID10
  btrfs: factor out block mapping for DUP profiles
  btrfs: factor out RAID1 block mapping
  btrfs: factor out block-mapping for RAID0
  btrfs: re-introduce struct btrfs_io_geometry
  btrfs: factor out helper for single device IO check
  btrfs: migrate btrfs_repair_io_failure() to folio interfaces
  btrfs: migrate eb_bitmap_offset() to folio interfaces
  btrfs: migrate various end io functions to folios
  btrfs: migrate subpage code to folio interfaces
  btrfs: migrate get_eb_page_index() and get_eb_offset_in_page() to folios
  btrfs: don't double put our subpage reference in alloc_extent_buffer
  btrfs: cleanup metadata page pointer usage
  ...

Pull xfs updates from Chandan Babu:
 "New features/functionality:
   - Online repair:
       - Reserve disk space for online repairs
       - Fix misinteraction between the AIL and btree bulkloader because
         of which the bulk load fails to queue a buffer for writeback if
         it happens to be on the AIL list
       - Prevent transaction reservation overflows when reaping blocks
         during online repair
       - Whenever possible, bulkloader now copies multiple records into
         a block
       - Support repairing of
           1. Per-AG free space, inode and refcount btrees
           2. Ondisk inodes
           3. File data and attribute fork mappings
       - Verify the contents of
           1. Inode and data fork of realtime bitmap file
           2. Quota files
   - Introduce MF_MEM_PRE_REMOVE. This will be used to notify tasks
     about a pmem device being removed

  Bug fixes:
   - Fix memory leak of recovered attri intent items
   - Fix UAF during log intent recovery
   - Fix realtime geometry integer overflows
   - Prevent scrub from live locking in xchk_iget
   - Prevent fs shutdown when removing files during low free disk space
   - Prevent transaction reservation overflow when extending an RT
     device
   - Prevent incorrect warning from being printed when extending a
     filesystem
   - Fix an off-by-one error in xreap_agextent_binval
   - Serialize access to perag radix tree during deletion operation
   - Fix perag memory leak during growfs
   - Allow allocation of minlen realtime extent when the maximum sized
     realtime free extent is minlen in size

  Cleanups:
   - Remove duplicate boilerplate code spread across functionality
     associated with different log items
   - Cleanup resblks interfaces
   - Pass defer ops pointer to defer helpers instead of an enum
   - Initialize di_crc in xfs_log_dinode to prevent KMSAN warnings
   - Use static_assert() instead of BUILD_BUG_ON_MSG() to validate size
     of structures and structure member offsets. This is done in order
     to be able to share the code with userspace
   - Move XFS documentation under a new directory specific to XFS
   - Do not invoke deferred ops' ->create_done callback if the deferred
     operation does not have an intent item associated with it
   - Remove duplicate inclusion of header files from scrub/health.c
   - Refactor Realtime code
   - Cleanup attr code"

* tag 'xfs-6.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (123 commits)
  xfs: use the op name in trace_xlog_intent_recovery_failed
  xfs: fix a use after free in xfs_defer_finish_recovery
  xfs: turn the XFS_DA_OP_REPLACE checks in xfs_attr_shortform_addname into asserts
  xfs: remove xfs_attr_sf_hdr_t
  xfs: remove struct xfs_attr_shortform
  xfs: use xfs_attr_sf_findname in xfs_attr_shortform_getvalue
  xfs: remove xfs_attr_shortform_lookup
  xfs: simplify xfs_attr_sf_findname
  xfs: move the xfs_attr_sf_lookup tracepoint
  xfs: return if_data from xfs_idata_realloc
  xfs: make if_data a void pointer
  xfs: fold xfs_rtallocate_extent into xfs_bmap_rtalloc
  xfs: simplify and optimize the RT allocation fallback cascade
  xfs: reorder the minlen and prod calculations in xfs_bmap_rtalloc
  xfs: remove XFS_RTMIN/XFS_RTMAX
  xfs: remove rt-wrappers from xfs_format.h
  xfs: factor out a xfs_rtalloc_sumlevel helper
  xfs: tidy up xfs_rtallocate_extent_exact
  xfs: merge the calls to xfs_rtallocate_range in xfs_rtallocate_block
  xfs: reflow the tail end of xfs_rtallocate_extent_block
  ...

Pull fsnotify updates from Jan Kara:
 "fanotify changes allowing use of fanotify directory events even for
  filesystems such as FUSE which don't report proper fsid"

* tag 'fsnotify_for_v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: allow "weak" fsid when watching a single filesystem
  fanotify: store fsid in mark instead of in connector

Pull small quota cleanup from Jan Kara.

* tag 'fs_for_v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: convert dquot_claim_space_nodirty() to return void

Make erofs_err() and erofs_info() support NULL sb parameter for more
general usage.
Suggested-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Link: https://lore.kernel.org/r/20240103123202.3054718-1-guochunhai@vivo.comReviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

Syzbot reported a KMSAN warning,
erofs: (device loop0): z_erofs_lz4_decompress_mem: failed to decompress -12 in[46, 4050] out[917]
=====================================================
BUG: KMSAN: uninit-value in hex_dump_to_buffer+0xae9/0x10f0 lib/hexdump.c:194
  ..
  print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276
  z_erofs_lz4_decompress_mem fs/erofs/decompressor.c:252 [inline]
  z_erofs_lz4_decompress+0x257e/0x2a70 fs/erofs/decompressor.c:311
  z_erofs_decompress_pcluster fs/erofs/zdata.c:1290 [inline]
  z_erofs_decompress_queue+0x338c/0x6460 fs/erofs/zdata.c:1372
  z_erofs_runqueue+0x36cd/0x3830
  z_erofs_read_folio+0x435/0x810 fs/erofs/zdata.c:1843

The root cause is that the printed decompressed buffer may be filled
incompletely due to decompression failure.  Since they were once only
used for debugging, get rid of them now.

Reported-and-tested-by: syzbot+6c746eea496f34b3161d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000321c24060d7cfa1c@google.comReviewed-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231227151903.2900413-1-hsiangkao@linux.alibaba.com

From 2.46 to 2.47
Signed-off-by: Steve French <stfrench@microsoft.com>