- 26 Jul, 2020 4 commits
-
-
Ravi Bangoria authored
'ea' returned by analyse_instr() needs to be aligned down to cache block size for CACHEOP instructions. analyse_instr() does not set size for CACHEOP, thus size also needs to be calculated manually. Fixes: 27985b2a ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly") Fixes: 74c68810 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint") Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200723090813.303838-4-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
Pedro Miraglia Franco de Carvalho noticed that on p8/p9, DAR value is inconsistent with different type of load/store. Like for byte,word etc. load/stores, DAR is set to the address of the first byte of overlap between watch range and real access. But for quadword load/ store it's sometime set to the address of the first byte of real access whereas sometime set to the address of the first byte of overlap. This issue has been fixed in p10. In p10(ISA 3.1), DAR is always set to the address of the first byte of overlap. Commit 27985b2a ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly") wrongly assumes that DAR is set to the address of the first byte of overlap for all load/stores on p8/p9 as well. Fix that. With the fix, we now rely on 'ea' provided by analyse_instr(). If analyse_instr() fails, generate event unconditionally on p8/p9, and on p10 generate event only if DAR is within a DAWR range. Note: 8xx is not affected. Fixes: 27985b2a ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly") Fixes: 74c68810 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint") Reported-by:
Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com> Signed-off-by:
-
Ravi Bangoria authored
Milton Miller reported that we are aligning start and end address to wrong size SZ_512M. It should be SZ_512. Fix that. While doing this change I also found a case where ALIGN() comparison fails. Within a given aligned range, ALIGN() of two addresses does not match when start address is pointing to the first byte and end address is pointing to any other byte except the first one. But that's not true for ALIGN_DOWN(). ALIGN_DOWN() of any two addresses within that range will always point to the first byte. So use ALIGN_DOWN() instead of ALIGN(). Fixes: e68ef121 ("powerpc/watchpoint: Use builtin ALIGN*() macros") Reported-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
POWER6 only supports AMR update via privileged mode (MSR[PR] = 0, SPRN_AMR=29) The PR=1 (userspace) alias for that SPR (SPRN_AMR=13) was only supported from POWER7. Since we don't allow userspace modifying of AMR value we should disable pkey support on P6 and before. The hypervisor will still report pkey support via "ibm,processor-storage-keys". Hence also check for P7 CPU_FTR bit to decide on pkey support. Fixes: f491fe3f ("powerpc/book3s64/pkeys: Simplify the key initialization") Reported-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
- 24 Jul, 2020 2 commits
-
-
Michael Ellerman authored
When I "fixed" the ppc64e build in Nick's recent patch, I typoed the CONFIG symbol, resulting in one that doesn't exist. Fix it to use the correct symbol. Reported-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Fixes: 7fa95f9a ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by:
-
Michael Ellerman authored
ppc64_book3e_allmodconfig fails with: arch/powerpc/lib/test_emulate_step.c: In function 'test_pld': arch/powerpc/lib/test_emulate_step.c:113:7: error: implicit declaration of function 'cpu_has_feature' 113 | if (!cpu_has_feature(CPU_FTR_ARCH_31)) { | ^~~~~~~~~~~~~~~ Add an include of cpu_has_feature.h to fix it. Fixes: b6b54b42 ("powerpc/sstep: Add tests for prefixed integer load/stores") Signed-off-by:
-
- 23 Jul, 2020 23 commits
-
-
Michael Ellerman authored
From Nick's cover letter: Linux powerpc new system call instruction and ABI System Call Vectored (scv) ABI ============================== The scv instruction is introduced with POWER9 / ISA3, it comes with an rfscv counter-part. The benefit of these instructions is performance (trading slower SRR0/1 with faster LR/CTR registers, and entering the kernel with MSR[EE] and MSR[RI] left enabled, which can reduce MSR updates. The scv instruction has 128 levels (not enough to cover the Linux system call space). Assignment and advertisement ---------------------------- The proposal is to assign scv levels conservatively, and advertise them with HWCAP feature bits as we add support for more. Linux has not enabled FSCR[SCV] yet, so executing the scv instruction will cause the kernel to log a "SCV facility unavilable" message, and deliver a SIGILL with ILL_ILLOPC to the process. Linux has defined a HWCAP2 bit PPC_FEATURE2_SCV for SCV support, but does not set it. This change allocates the zero level ('scv 0'), advertised with PPC_FEATURE2_SCV, which will be used to provide normal Linux system calls (equivalent to 'sc'). Attempting to execute scv with other levels will cause a SIGILL to be delivered the same as before, but will not log a "SCV facility unavailable" message (because the processor facility is enabled). Calling convention ------------------ The proposal is for scv 0 to provide the standard Linux system call ABI with the following differences from sc convention[1]: - LR is to be volatile across scv calls. This is necessary because the scv instruction clobbers LR. From previous discussion, this should be possible to deal with in GCC clobbers and CFI. - cr1 and cr5-cr7 are volatile. This matches the C ABI and would allow the kernel system call exit to avoid restoring the volatile cr registers (although we probably still would anyway to avoid information leaks). - Error handling: The consensus among kernel, glibc, and musl is to move to using negative return values in r3 rather than CR0[SO]=1 to indicate error, which matches most other architectures, and is closer to a function call. Notes ----- - r0,r4-r8 are documented as volatile in the ABI, but the kernel patch as submitted currently preserves them. This is to leave room for deciding which way to go with these. Some small benefit was found by preserving them[1] but I'm not convinced it's worth deviating from the C function call ABI just for this. Release code should follow the ABI. Previous discussions: https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208691.html https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209268.html [1] https://github.com/torvalds/linux/blob/master/Documentation/powerpc/syscall64-abi.rst [2] https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209263.html -
Michael Ellerman authored
Update our memcmp selftest, to test the case where we're comparing up to the end of a page and the subsequent page is not mapped. We have to make sure we don't read off the end of the page and cause a fault. We had a bug there in the past, fixed in commit d9470757 ("powerpc/64: Fix memcmp reading past the end of src/dest"). Signed-off-by:
-
Pratik Rajesh Sampat authored
POWER9 onwards the support for the registers HID1, HID4, HID5 has been receded. Although mfspr on the above registers worked in Power9, In Power10 simulator is unrecognized. Moving their assignment under the check for machines lower than Power9 Signed-off-by:
Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Pratik Rajesh Sampat authored
Replace the variable name from using "pnv_first_spr_loss_level" to "deep_spr_loss_state". pnv_first_spr_loss_level is supposed to be the earliest state that has OPAL_PM_LOSE_FULL_CONTEXT set, in other places the kernel uses the "deep" states as terminology. Hence renaming the variable to be coherent to its semantics. Signed-off-by:
-
Pratik Rajesh Sampat authored
The POWER9 idle driver contains implementation-specific details that means it is not suitable to run on any processor that implements ISA v3.0 (e.g., POWER10), so only init the driver when running on a POWER9. Signed-off-by:
-
Santosh Sivaraj authored
hash_low_64.S was removed in commit a43c0eb8 ("powerpc/mm: Convert 4k insert from asm to C") and flush_hash_page() is no longer called from any assembly routine. Signed-off-by:
Santosh Sivaraj <santosh@fossix.org> [mpe: Tweak comment wording] Signed-off-by:
-
Leonardo Bras authored
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got defined as H_DISABLE_AND_GETC instead. This define was introduced with a typo in commit <b13a96cf> ("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was later used without having the typo noticed. Signed-off-by:
Leonardo Bras <leobras.c@gmail.com> Acked-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Christoph Hellwig authored
Both the ->dump method and snprintf return an int. So switch to an int and properly handle errors from ->dump. Fixes: 5456ffde ("powerpc/spufs: simplify spufs core dumping") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Wen Xiong authored
Several device drivers hit EEH(Extended Error handling) when triggering kdump on Pseries PowerVM. This patch implemented a reset of the PHBs in pci general code when triggering kdump. PHB reset stop all PCI transactions from normal kernel. We have tested the patch in several enviroments: - direct slot adapters - adapters under the switch - a VF adapter in PowerVM - a VF adapter/adapter in KVM guest. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> [mpe: Fix broken whitespace, subject & SOB formatting] Signed-off-by:
-
Nicholas Piggin authored
powerpc return from interrupt and return from system call sequences are context synchronising. Signed-off-by:
-
Palmer Dabbelt authored
This primitive has been renamed, but because it was spelled incorrectly in the first place it must have escaped the fixup patch. As far as I can tell this logic is still correct: smp_mb__after_spinlock() uses the default smp_mb() implementation, which is "sync" rather than "hwsync" but those are the same (though I'm not that familiar with PowerPC). Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Balamuruhan S authored
fix checkpatch.pl warnings by moving extern declaration from source file to headerfile. Signed-off-by:
Balamuruhan S <bala24@linux.ibm.com> Signed-off-by:
-
Balamuruhan S authored
retrieve prefix instruction operands RA and pc relative bit R values using macros and adopt it in sstep.c and test_emulate_step.c. Signed-off-by:
-
Balamuruhan S authored
testcases for `paddi` instruction to cover the negative case, if R is equal to 1 and RA is not equal to 0, the instruction form is invalid. Signed-off-by:
-
Balamuruhan S authored
add provision to declare test is a negative scenario, verify whether emulation fails and avoid executing it. Signed-off-by:
-
Jordan Niethe authored
Currently prefixed instructions are dumped as two separate word instructions. Use mread_instr() so that prefixed instructions are read as such and update the incrementor in the loop to take this into account. 'dump_func' is print_insn_powerpc() which comes from ppc-dis.c which is taken from binutils. When this is updated prefixed instructions will be disassembled. Currently dumping prefixed instructions looks like this: 0:mon> di c000000000094168 c000000000094168 0x06000000 .long 0x6000000 c00000000009416c 0x392a0003 addi r9,r10,3 c000000000094170 0x913f0028 stw r9,40(r31) c000000000094174 0xe93f002a lwa r9,40(r31) c000000000094178 0x7d234b78 mr r3,r9 c00000000009417c 0x383f0040 addi r1,r31,64 c000000000094180 0xebe1fff8 ld r31,-8(r1) c000000000094184 0x4e800020 blr c000000000094188 0x60000000 nop ... c000000000094190 0x3c4c0121 addis r2,r12,289 c000000000094194 0x38429670 addi r2,r2,-27024 c000000000094198 0x7c0802a6 mflr r0 c00000000009419c 0x60000000 nop c0000000000941a0 0xe9240100 ld r9,256(r4) c0000000000941a4 0x39400001 li r10,1 After this it looks like: 0:mon> di c000000000094168 c000000000094168 0x06000000 0x392a0003 .long 0x392a000306000000 c000000000094170 0x913f0028 stw r9,40(r31) c000000000094174 0xe93f002a lwa r9,40(r31) c000000000094178 0x7d234b78 mr r3,r9 c00000000009417c 0x383f0040 addi r1,r31,64 c000000000094180 0xebe1fff8 ld r31,-8(r1) c000000000094184 0x4e800020 blr c000000000094188 0x60000000 nop ... c000000000094190 0x3c4c0121 addis r2,r12,289 c000000000094194 0x38429570 addi r2,r2,-27280 c000000000094198 0x7c0802a6 mflr r0 c00000000009419c 0x60000000 nop c0000000000941a0 0xe9240100 ld r9,256(r4) c0000000000941a4 0x39400001 li r10,1 c0000000000941a8 0x3d02000b addis r8,r2,11 Signed-off-by:
-
Jordan Niethe authored
There are quite a few places where instructions are printed, this is done using a '%x' format specifier. With the introduction of prefixed instructions, this does not work well. Currently in these places, ppc_inst_val() is used for the value for %x so only the first word of prefixed instructions are printed. When the instructions are word instructions, only a single word should be printed. For prefixed instructions both the prefix and suffix should be printed. To accommodate both of these situations, instead of a '%x' specifier use '%s' and introduce a helper, __ppc_inst_as_str() which returns a char *. The char * __ppc_inst_as_str() returns is buffer that is passed to it by the caller. It is cumbersome to require every caller of __ppc_inst_as_str() to now declare a buffer. To make it more convenient to use __ppc_inst_as_str(), wrap it in a macro that uses a compound statement to allocate a buffer on the caller's stack before calling it. Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Segher Boessenkool <segher@kernel.crashing.org> [mpe: Drop 0x prefix to match most existings uses, especially xmon] Signed-off-by:
-
Jordan Niethe authored
Use the existing support for testing compute type instructions to test Prefixed Add Immediate (paddi). The R bit of the paddi instruction controls whether current instruction address is used. Add test cases for when R=1 and for R=0. paddi has a 34 bit immediate field formed by concatenating si0 and si1. Add tests for the extreme values of this field. Skip the paddi tests if ISA v3.1 is unsupported. Some of these test cases were added by Balamuruhan S. Signed-off-by:
-
Jordan Niethe authored
An a array of struct compute_test's are used to declare tests for compute instructions. Add a cpu_feature field to struct compute_test as an optional way to specify a cpu feature that must be present. If not present then skip the test. Signed-off-by:
-
Jordan Niethe authored
The tests for emulation of compute instructions execute and emulate an instruction and then compare the results to verify the emulation. In ISA v3.1 there are instructions that operate relative to the NIP. Therefore set the NIP in the regs used for the emulated instruction to the location of the executed instruction so they will give the same result. This is a rework of a patch by Balamuruhan S. Signed-off-by:
-
Jordan Niethe authored
Add tests for the prefixed versions of the floating-point load/stores that are currently tested. This includes the following instructions: * Prefixed Load Floating-Point Single (plfs) * Prefixed Load Floating-Point Double (plfd) * Prefixed Store Floating-Point Single (pstfs) * Prefixed Store Floating-Point Double (pstfd) Skip the new tests if ISA v3.10 is unsupported. Signed-off-by:
-
Jordan Niethe authored
Add tests for the prefixed versions of the integer load/stores that are currently tested. This includes the following instructions: * Prefixed Load Doubleword (pld) * Prefixed Load Word and Zero (plwz) * Prefixed Store Doubleword (pstd) Skip the new tests if ISA v3.1 is unsupported. Signed-off-by:
-
- 22 Jul, 2020 11 commits
-
-
Nicholas Piggin authored
Add support for the scv instruction on POWER9 and later CPUs. For now this implements the zeroth scv vector 'scv 0', as identical to 'sc' system calls, with the exception that LR is not preserved, nor are volatile CR registers, and error is not indicated with CR0[SO], but by returning a negative errno. rfscv is implemented to return from scv type system calls. It can not be used to return from sc system calls because those are defined to preserve LR. getpid syscall throughput on POWER9 is improved by 26% (428 to 318 cycles), largely due to reducing mtmsr and mtspr. Signed-off-by:
-
Nicholas Piggin authored
The scv instruction causes an interrupt which can enter the kernel with MSR[EE]=1, thus allowing interrupts to hit at any time. These must not be taken as normal interrupts, because they come from MSR[PR]=0 context, and yet the kernel stack is not yet set up and r13 is not set to the PACA). Treat this as a soft-masked interrupt regardless of the soft masked state. This does not affect behaviour yet, because currently all interrupts are taken with MSR[EE]=0. Signed-off-by:
-
Athira Rajeev authored
PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This field controls whether BHRB entries are written when BHRB recording is enabled by other bits. This patch implements support for this BHRB disable bit. By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to this bit will have BHRB enabled. This addresses backward compatibility (for older OS), since this bit will be cleared and hardware will be writing to BHRB by default. This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 (there by the core will run faster) and enable this feature only on runtime ie, on explicit need from user. Also save/restore MMCRA in the restore path of state-loss idle state to make sure we keep BHRB disabled if it was not enabled on request at runtime. Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Athira Rajeev authored
PowerISA v3.1 introduce filtering support for PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter support for "ind_call" and "cond" in power10_bhrb_filter_map(). Signed-off-by:
-
Athira Rajeev authored
Commit bb19af81 ("powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer") added a check in bhrb_read() to filter the kernel address from BHRB buffer. This patch modified it to avoid that check for PowerISA v3.1 based processors, since PowerISA v3.1 allows only MSR[PR]=1 address to be written to BHRB buffer. Signed-off-by:
-
Athira Rajeev authored
Base enablement patch to register performance monitoring hardware support for power10. Patch introduce the raw event encoding format, defines the supported list of events, config fields for the event attributes and their corresponding bit values which are exported via sysfs. Patch also enhances the support function in isa207_common.c to include power10 pmu hardware. Reported-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Madhavan Srinivasan authored
Add Power10 feature function to DT CPU features, along with a Power10 specific init() to initialize PMU SPRs, sets the oprofile_cpu_type and cpu_features. This will enable performance monitoring unit (PMU) for Power10 in CPU features with "performance-monitor-power10". For Power ISA v3.1, BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB feature at boot for Power10. Signed-off-by:
-
Madhavan Srinivasan authored
PowerISA v3.1 added three new perfromance monitoring unit (PMU) speical purpose register (SPR). They are Monitor Mode Control Register 3 (MMCR3), Sampled Instruction Event Register 2 (SIER2), Sampled Instruction Event Register 3 (SIER3). Patch here adds a new dump function dump_310_sprs to print these SPR values. Signed-off-by:
-
Athira Rajeev authored
Power ISA v3.1 has added new performance monitoring unit (PMU) special purpose registers (SPRs). They are: Monitor Mode Control Register 3 (MMCR3) Sampled Instruction Event Register A (SIER2) Sampled Instruction Event Register B (SIER3) Add support to save/restore these new SPRs while entering/exiting guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3. Add new SPRs to KVM API documentation. Signed-off-by:
-
Madhavan Srinivasan authored
PowerISA v3.1 includes new performance monitoring unit(PMU) special purpose registers (SPRs). They are Monitor Mode Control Register 3 (MMCR3) Sampled Instruction Event Register 2 (SIER2) Sampled Instruction Event Register 3 (SIER3) MMCR3 is added for further sampling related configuration control. SIER2/SIER3 are added to provide additional information about the sampled instruction. Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of these new SPRs, updates the struct thread_struct to include these new SPRs, include MMCR3 in struct mmcr_regs. This is needed to support programming of MMCR3 SPR during event_enable/disable. Patch also adds the sysfs support for the MMCR3 SPR along with SPRN_ macros for these new pmu SPRs. Signed-off-by:
-
Athira Rajeev authored
Events of type PERF_TYPE_HW_CACHE was described for Power PMU as: int (*cache_events)[type][op][result]; where type, op, result values unpacked from the event attribute config value is used to generate the raw event code at runtime. So far the event code values which used to create these cache-related events were within 32 bit and `int` type worked. In power10, some of the event codes are of 64-bit value and hence update the Power PMU cache_events to `u64` type in `power_pmu` struct. Also propagate this change to existing all PMU driver code paths which are using ppmu->cache_events. Signed-off-by:
-
