Add 8 new mirred tdc tests that target mirred to block:

- Add mirred mirror to egress block action
- Add mirred mirror to ingress block action
- Add mirred redirect to egress block action
- Add mirred redirect to ingress block action
- Try to add mirred action with both dev and block
- Try to add mirred action without specifying neither dev nor block
- Replace mirred redirect to dev action with redirect to block
- Replace mirred redirect to block action with mirror to dev
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240202020726.529170-1-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A wrapper function is available since the commit 890cc39a
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/f87065d0-e398-4ffa-bfa4-9ff99d73f206@web.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A wrapper function is available since the commit 890cc39a
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/46f64db3-3f8f-4c6c-8d70-38daeefccac1@web.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The two tests that make use of multicast routig (router.sh and
router_multicast.sh) are currently failing in the netdev CI because the
kernel is missing multicast routing support.

Fix by adding the required config entries.

Fixes: 6d4efada ("selftests: forwarding: Add multicast routing test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208165538.1303021-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge netdev bits of io_uring busy polling support.

Jens Axboe says:

====================
io_uring: add napi busy polling support

I finally got around to testing this patchset in its current form, and
results look fine to me. It Works. Using the basic ping/pong test that's
part of the liburing addition, without enabling NAPI I get:

Stock settings, no NAPI, 100k packets:

 rtt(us) min/avg/max/mdev = 31.730/37.006/87.960/0.497

 and with -t10 -b enabled:

 rtt(us) min/avg/max/mdev = 23.250/29.795/63.511/1.203

In short, this patchset enables per io_uring NAPI enablement, rather
than need to enable that globally. This allows targeted NAPI usage with
io_uring.

Here's Stefan's v15 posting, which predates this one:

https://lore.kernel.org/io-uring/20230608163839.2891748-1-shr@devkernel.io/
====================

Link: https://lore.kernel.org/r/20240206163422.646218-1-axboe@kernel.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This adds the napi_busy_loop_rcu() function. This function assumes that
the calling function is already holding the rcu read lock and
napi_busy_loop() does not need to take the rcu read lock. Add a
NAPI_F_NO_SCHED flag, which tells __napi_busy_loop() to abort if we
need to reschedule rather than drop the RCU read lock and reschedule.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Link: https://lore.kernel.org/r/20230608163839.2891748-3-shr@devkernel.ioSigned-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This splits off the key part of the napi_busy_poll function into its own
function, __napi_busy_poll, and changes the prefer_busy_poll bool to be
flag based to allow passing in more flags in the future.

This is done in preparation for an additional napi_busy_poll() function,
that doesn't take the rcu_read_lock(). The new function is introduced
in the next patch.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Link: https://lore.kernel.org/r/20230608163839.2891748-2-shr@devkernel.ioSigned-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Jinjian Song says:

====================
net: wwan: t7xx: Add fastboot interface

Add support for t7xx WWAN device firmware flashing & coredump collection
using fastboot interface.

Using fastboot protocol command through /dev/wwan0fastboot0 WWAN port to
support firmware flashing and coredump collection, userspace get device
mode from /sys/bus/pci/devices/${bdf}/t7xx_mode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On early detection of wwan device in fastboot mode, driver sets
up CLDMA0 HW tx/rx queues for raw data transfer and then create
fastboot port to userspace.

Application can use this port to flash firmware and collect
core dump by fastboot protocol commands.
E.g., flash firmware through fastboot port:
 - "download:%08x": write data to memory with the download size.
 - "flash:%s": write the previously downloaded image to the named partition.
 - "reboot": reboot the device.

Link: https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.mdSigned-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To support cases such as FW update or Core dump, the t7xx
device is capable of signaling the host that a special port
needs to be created before the handshake phase.

Adds the infrastructure required to create the early ports
which also requires a different configuration of CLDMA queues.

Base on the v5 patch version of follow series:
'net: wwan: t7xx: fw flashing & coredump support'
(https://patchwork.kernel.org/project/netdevbpf/patch/3777bb382f4b0395cb594a602c5c79dbab86c9e0.1674307425.git.m.chetan.kumar@linux.intel.com/)
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for userspace to get/set the device mode, device's state
machine changes between (unknown/ready/reset/fastboot).

Get the device state mode:
 - 'cat /sys/bus/pci/devices/${bdf}/t7xx_mode'

Set the device state mode:
 - reset(cold reset): 'echo reset > /sys/bus/pci/devices/${bdf}/t7xx_mode'
 - fastboot: 'echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode'
Reload driver to get the new device state after setting operation.
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new WWAN port that connects to the device fastboot protocol
interface.
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Matthew Wood says:

====================
netconsole: Add userdata append support

Add the ability to add custom userdata to every outbound netconsole message
as a collection of key/value pairs, allowing users to add metadata to every
netconsole message which can be used for  for tagging, filtering, and
aggregating log messages.

In a previous patch series the ability to prepend the uname release was
added towards the goals above. This patch series builds on that
idea to allow any userdata, keyed by a user provided name, to be
included in netconsole messages.

If CONFIG_NETCONSOLE_DYNAMIC is enabled an additional userdata
directory will be presented in the netconsole configfs tree, allowing
the addition of userdata entries.

    /sys/kernel/config/netconsole/
			<target>/
				enabled
				release
				dev_name
				local_port
				remote_port
				local_ip
				remote_ip
				local_mac
				remote_mac
				userdata/
					<key>/
						value
					<key>/
						value
          ...

v1->v2:
 * Updated netconsole_target docs, kdoc is now clean
v2->v3:
 * Remove inline keyword from to_userdat* functions
 * Break up some lines that exceeded 80 chars
 * Replace typos and remove {} from single line if statement
 * Remove unused variable

Testing for this series is as follows:

Build every patch without CONFIG_NETCONSOLE_DYNAMIC, and also built
with CONFIG_NETCONSOLE_DYNAMIC enabled for every patch after the config
option was added

Test Userdata configfs

    # Adding userdata
    cd /sys/kernel/config/netconsole/ && mkdir cmdline0 && cd cmdline0
    mkdir userdata/release && echo hotfix1 > userdata/release/value
    preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
    [[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail
    mkdir userdata/testing && echo something > userdata/testing/value
    preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
    [[ "$preview" == $'release=hotfix1\ntesting=something' ]] && echo pass || echo fail
    #
    # Removing Userdata
    rmdir userdata/testing
    preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
    [[ "$preview" == $'release=hotfix1' ]] && echo pass || echo fail
    rmdir userdata/release
    preview=$(for f in `ls userdata`; do echo $f=$(cat userdata/$f/value); done)
    [[ "$preview" == $'' ]] && echo pass || echo fail
    #
    # Adding userdata key with too large of 6.7.0-rc8-virtme,12,481,17954104,-directory name [<54 chars]
    mkdir userdata/testing12345678901234567890123456789012345678901234567890
    [[ $? == 1 ]] && echo pass || echo fail
    #
    # Adding userdata value with too large of value [<200 chars]
    mkdir userdata/testing
    echo `for i in {1..201};do printf "%s" "v";done` > userdata/testing/value
    [[ $? == 1 ]] && echo pass || echo fail
    rmdir userdata/testing

- Output:

    pass
    pass
    pass
    pass
    pass
    mkdir: cannot create directory ‘cmdline0/userdata/testing12345678901234567890123456789012345678901234567890’: File name too long
    pass
    bash: echo: write error: Message too long
    pass

Test netconsole messages (w/ msg fragmentation)

    echo `for i in {1..996};do printf "%s" "v";done` > /dev/kmsg

- Output:

    6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=0/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv6.7.0-rc8-virtme,12,484,84321212,-,ncfrag=952/997;vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

Test empty userdatum

    cd /sys/kernel/config/netconsole/ && mkdir cmdline0
    mkdir cmdline0/userdata/empty
    echo test > /dev/kmsg
    rmdir cmdline0/userdata/empty

- Output:

Test netconsole messages (w/o userdata fragmentation)

    cd /sys/kernel/config/netconsole/ && mkdir cmdline0
    mkdir cmdline0/userdata/release && echo hotfix1 > cmdline0/userdata/release/value
    mkdir cmdline0/userdata/testing && echo something > cmdline0/userdata/testing/value
    echo test > /dev/kmsg
    rmdir cmdline0/userdata/release
    rmdir cmdline0/userdata/testing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Regardless of whether the original message body or formatted userdata
exceeds the MAX_PRINT_CHUNK, append userdata to the netconsole message
starting with the first chunk that has available space after writing the
body.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Append userdata to outgoing unfragmented (<1000 bytes) netconsole messages.
When sending messages the userdata string is already formatted and stored
in netconsole_target->userdata_complete.

Always write the outgoing message to buf, so userdata can be appended in
a standard fashion. This is a change from only using buf when the
release needs to be prepended to the message.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store a formatted string for userdata that will be appended to netconsole
messages. The string has a capacity of 4KB, as calculated by the userdatum
entry length of 256 bytes and a max of 16 userdata entries.

Update the stored netconsole_target->userdata_complete string with the new
formatted userdata values when a userdatum is created, edited, or
removed. Each userdata entry contains a trailing newline, which will be
formatted as such in netconsole messages::

    6.7.0-rc8-virtme,12,500,1646292204,-;test
    release=foo
    something=bar
    6.7.0-rc8-virtme,12,500,1646292204,-;another test
    release=foo
    something=bar

Enforcement of MAX_USERDATA_ITEMS is done in userdatum_make_item;
update_userdata will not check for this case but will skip any userdata
children over the limit of MAX_USERDATA_ITEMs.

If a userdata entry/dir is created but no value is provided, that entry
will be skipped. This is in part because update_userdata() can't be
called in userdatum_make_item() since the item will not have been added
to the userdata config_group children yet. To preserve the experience of
adding an empty userdata that doesn't show up in the netconsole
messages, purposefully skip empty userdata items even when
update_userdata() can be called.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create configfs machinery for netconsole userdata appending, which depends
on CONFIG_NETCONSOLE_DYNAMIC (for configfs interface). Add a userdata
config_group to netconsole_target for managing userdata entries as a tree
under the netconsole configfs subsystem. Directory names created under the
userdata directory become userdatum keys; the userdatum value is the
content of the value file.

Include the minimum-viable-changes for userdata configfs config_group.
init_target_config_group() ties in the complete configfs machinery to
avoid unused func/variable errors during build. Initializing the
netconsole_target->group is moved to init_target_config_group, which
will also init and add the userdata config_group.

Each userdatum entry has a limit of 256 bytes (54 for
the key/directory, 200 for the value, and 2 for '=' and '\n'
characters), which is enforced by the configfs functions for updating
the userdata config_group.

When a new netconsole_target is created, initialize the userdata
config_group and add it as a default group for netconsole_target
config_group, allowing the userdata configfs sub-tree to be presented
in the netconsole configfs tree under the userdata directory.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new User Data section to the netconsole docs to describe the
appending of user data capability (for netconsole dynamic configuration)
with usage and netconsole output examples.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move newline trimming logic from `dev_name_store()` to a new function
(trim_newline()) for shared use in netconsole.c
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to support a nested userdata config_group in later patches,
use a config_group for netconsole_target instead of a
config_item. It's a no-op functionality-wise, since
config_group maintains all features of a config_item via the cg_item
member.
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Address checkpatch lint suggestions in preparation for later changes
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

for_each_netdev_dump() can be used with RCU protection,
no need for rtnl if we are going to use dev_hold()/dev_put().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240207153514.3640952-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-06 (ixgbe)

This series contains updates to ixgbe driver only.

Jedrzej continues cleanup work from conversion away from ixgbe_status;
s32 values are changed to int, various style issues are addressed, and
some return statements refactored to address some smatch warnings.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ixgbe: Clarify the values of the returning status
  ixgbe: Rearrange args to fix reverse Christmas tree
  ixgbe: Convert ret val type from s32 to int
====================

Link: https://lore.kernel.org/r/20240206214054.1002919-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Biju Das says:

====================
Add HW checksum offload support for RZ/G2L GbEthernet IP

This patch series aims to add HW checksum offload supported by TOE module
found on the RZ/G2L Gb ethernet IP.

TOE has hardware support for calculating IP header and TCP/UDP/ICMP
checksum for both IPv4 and IPv6.

For Rx, the 4-byte result of checksum calculation is attached to the
Ethernet frames.First 2-bytes is result of IPv4 header checksum and next
2-bytes is TCP/UDP/ICMP checksum.

If a frame does not have checksum error, 0x0000 is attached as checksum
calculation result. For unsupported frames 0xFFFF is attached as checksum
calculation result. In case of an IPv6 packet, IPv4 checksum is always set
to 0xFFFF.

For Tx, the result of checksum calculation is set to the checksum field of
each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported
frames, those fields are not changed. If a transmission frame is an UDPv4
frame and its checksum value in the UDP header field is 0x0000, TOE does
not calculate checksum for UDP part of this frame as it is optional
function as per standards.

Add Tx/Rx checksum offload supported by TOE for IPv4 and TCP/UDP protocols.

Results of iperf3 in Mbps

RZ/V2L:
TCP(Tx/Rx) results with checksum offload Enabled:	{921,932}
TCP(Tx/Rx) results with checksum offload Disabled:	{867,612}

UDP(Tx/Rx) results with checksum offload Enabled:	{950,946}
UDP(Tx/Rx) results with checksum offload Disabled:	{952,920}

RZ/G2L:
TCP(Tx/Rx) results with checksum offload Enabled:	{920,936}
TCP(Tx/Rx) results with checksum offload Disabled:	{871,626}

UDP(Tx/Rx) results with checksum offload Enabled:	{953,950}
UDP(Tx/Rx) results with checksum offload Disabled:	{954,920}

RZ/G2LC:
TCP(Tx/Rx) results with checksum offload Enabled:	{927,936}
TCP(Tx/Rx) results with checksum offload Disabled:	{889,626}

UDP(Tx/Rx) results with checksum offload Enabled:	{950,946}
UDP(Tx/Rx) results with checksum offload Disabled:	{949,944}
====================

Link: https://lore.kernel.org/r/20240207092838.160627-1-biju.das.jz@bp.renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TOE has hardware support for calculating IP header and TCP/UDP/ICMP
checksum for both IPv4 and IPv6.

Add Tx checksum offload supported by TOE for IPv4 and TCP/UDP.

For Tx, the result of checksum calculation is set to the checksum field of
each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported
frames, those fields are not changed. If a transmission frame is an UDPv4
frame and its checksum value in the UDP header field is 0x0000, TOE does
not calculate checksum for UDP part of this frame as it is optional
function as per standards.

We can test this functionality by the below commands

ethtool -K eth0 tx on --> to turn on Tx checksum offload
ethtool -K eth0 tx off --> to turn off Tx checksum offload
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240207092838.160627-3-biju.das.jz@bp.renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TOE has hardware support for calculating IP header and TCP/UDP/ICMP
checksum for both IPv4 and IPv6.

Add Rx checksum offload supported by TOE for IPv4 and TCP/UDP protocols.

For Rx, the 4-byte result of checksum calculation is attached to the
Ethernet frames.First 2-bytes is result of IPv4 header checksum and next
2-bytes is TCP/UDP/ICMP checksum.

If a frame does not have checksum error, 0x0000 is attached as checksum
calculation result. For unsupported frames 0xFFFF is attached as checksum
calculation result. In case of an IPv6 packet, IPv4 checksum is always set
to 0xFFFF.

We can test this functionality by the below commands

ethtool -K eth0 rx on --> to turn on Rx checksum offload
ethtool -K eth0 rx off --> to turn off Rx checksum offload
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240207092838.160627-2-biju.das.jz@bp.renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The variable capability is being assigned a value that is never
read and is being re-assigned later. The assignment is redundant and
can be removed. Also remove empty line before assignment to capability.

Cleans up clang scan build warning:
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c:1189:2: warning:
Value stored to 'capability' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206115049.1879389-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 759ab1ed ("net: store netdevs in an xarray")
Jakub added net->dev_by_index to map ifindex to netdevices.

We can get rid of the old hash table (net->dev_index_head),
one patch at a time, if performance is acceptable.

This patch removes unpleasant code to something more readable.

As a bonus, /proc/net/dev gets netdevices sorted by their ifindex.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240207165318.3814525-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert EEE handling to use linkmode bitmaps. This prepares for removing
the legacy bitmaps from struct ethtool_keee. No functional change
intended. When replacing _bnxt_fw_to_ethtool_adv_spds() with
_bnxt_fw_to_linkmode(), remove the fw_pause argument because it's
always passed as 0.

Note:
There's a discussion on whether the underlying implementation is correct,
but it's independent of this mechanical conversion w/o functional change.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/9123bf18-a0d0-404e-a7c4-d6c466b4c5e8@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Variable opaque_fid is being assigned twice with the same value
in two identical statements. Remove the redundant first assignment.

Cleans up clang scan build warning:
drivers/net/ethernet/qlogic/qed/qed_rdma.c:1796:2: warning: Value
stored to 'opaque_fid' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240205215530.1851115-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The variable okay is being initialized with a value that is never
read, it is being re-assigned later on. The initialization is
redundant and can be removed.  Also clean up assignment to
variable freespace using an assignment and mask operation.

Cleans up clang scan build warning:
drivers/net/ethernet/xircom/xirc2ps_cs.c:1244:5: warning: Value stored
to 'okay' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240205213643.1850420-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The convention is to not use the "inline" keyword for functions in C
files, but to let the compiler choose.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206112927.4134375-2-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The convention is to not use "inline" functions in C files, and let the
compiler decide whether to inline or not.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206112927.4134375-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After commit f86ad77f ("net: dsa: bcm_sf2: Utilize b53_{enable,
disable}_port"), bcm_sf2.c no longer calls b53_eee_enable_set(), and all
its callers are in b53_common.c.

We also need to move it, because it is called within b53_common.c before
its definition, and we want to avoid forward declarations.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240206112527.4132299-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Adding support for the Adva timecard.
The card uses different drivers to provide access to the
firmware SPI flash (Altera based).
Other parts of the code are the same and could be reused.
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240205153046.3642-1-maimon.sagi@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since NUM_XMIT_BUFFS is always 1, building m68k with sun3_defconfig and
-Warraybounds, this build warning is visible[1]:

drivers/net/ethernet/i825xx/sun3_82586.c: In function 'sun3_82586_timeout':
drivers/net/ethernet/i825xx/sun3_82586.c:990:122: warning: array subscript 1 is above array bounds of 'volatile struct transmit_cmd_struct *[1]' [-Warray-bounds=]
  990 |                 printk("%s: command-stats: %04x %04x\n",dev->name,swab16(p->xmit_cmds[0]->cmd_status),swab16(p->xmit_cmds[1]->cmd_status));
      |                                                                                                               ~~~~~~~~~~~~^~~
...
drivers/net/ethernet/i825xx/sun3_82586.c:156:46: note: while referencing 'xmit_cmds'
  156 |         volatile struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS];

Avoid accessing index 1 since it doesn't exist.

Link: https://github.com/KSPP/linux/issues/325 [1]
Cc: Sam Creasey <sammy@sammy.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240206161651.work.876-kees@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/stmicro/stmmac/common.h
  38cc3c6d ("net: stmmac: protect updates of 64-bit statistics counters")
  fd5a6a71 ("net: stmmac: est: Per Tx-queue error count for HLBF")
  c5c3e1bf ("net: stmmac: Offload queueMaxSDU from tc-taprio")

drivers/net/wireless/microchip/wilc1000/netdev.c
  c9013880 ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000")
  328efda2 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added")

net/unix/garbage.c
  11498715 ("af_unix: Remove io_uring code for GC.")
  1279f9d9 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from WiFi and netfilter.

  Current release - regressions:

   - nic: intel: fix old compiler regressions

   - netfilter: ipset: missing gc cancellations fixed

  Current release - new code bugs:

   - netfilter: ctnetlink: fix filtering for zone 0

  Previous releases - regressions:

   - core: fix from address in memcpy_to_iter_csum()

   - netfilter: nfnetlink_queue: un-break NF_REPEAT

   - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.

   - devlink: avoid potential loop in devlink_rel_nested_in_notify_work()

   - iwlwifi:
       - mvm: fix a battery life regression
       - fix double-free bug

   - mac80211: fix waiting for beacons logic

   - nic: nfp: flower: prevent re-adding mac index for bonded port

  Previous releases - always broken:

   - rxrpc: fix generation of serial numbers to skip zero

   - tipc: check the bearer type before calling tipc_udp_nl_bearer_add()

   - tunnels: fix out of bounds access when building IPv6 PMTU error

   - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
     missed

   - nic: atlantic: fix DMA mapping for PTP hwts ring

  Misc:

   - selftests: more fixes to deal with very slow hosts"

* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  s390/qeth: Fix potential loss of L3-IP@ in case of network issues
  netfilter: ipset: Missing gc cancellations fixed
  octeontx2-af: Initialize maps.
  net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
  net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
  net: intel: fix old compiler regressions
  MAINTAINERS: Maintainer change for rds
  selftests: cmsg_ipv6: repeat the exact packet
  ...

Pull pinctrl fix from Linus Walleij:
 "A single fix for the AMD driver which affects developer laptops, the
  pinctrl/GPIO driver won't probe on some systems"

* tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Add IRQF_ONESHOT to the interrupt request

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Narrow down target/match revision to u8 in nft_compat.

2) Bail out with unused flags in nft_compat.

3) Restrict layer 4 protocol to u16 in nft_compat.

4) Remove static in pipapo get command that slipped through when
   reducing set memory footprint.

5) Follow up incremental fix for the ipset performance regression,
   this includes the missing gc cancellation, from Jozsef Kadlecsik.

6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0
   as no filtering, from Felix Huettner.

7) Reject direction for NFT_CT_ID.

8) Use timestamp to check for set element expiration while transaction
   is handled to prevent garbage collection from removing set elements
   that were just added by this transaction. Packet path and netlink
   dump/get path still use current time to check for expiration.

9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal.

10) map_index needs to be percpu and per-set, not just percpu.
    At this time its possible for a pipapo set to fill the all-zero part
    with ones and take the 'might have bits set' as 'start-from-zero' area.
    From Florian Westphal. This includes three patches:

    - Change scratchpad area to a structure that provides space for a
      per-set-and-cpu toggle and uses it of the percpu one.

    - Add a new free helper to prepare for the next patch.

    - Remove the scratch_aligned pointer and makes AVX2 implementation
      use the exact same memory addresses for read/store of the matching
      state.

netfilter pull request 24-02-08

* tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  netfilter: ipset: Missing gc cancellations fixed
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
====================

Link: https://lore.kernel.org/r/20240208112834.1433-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>