Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to
be set explicitly with this flag.
Signed-off-by: Chris Ye <lzye@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The mcp2221 driver GPIO output handling has has several issues.

* A wrong value is used for the GPIO direction.

* Wrong offsets are calculated for some GPIO set value/set direction
  operations, when offset is larger than 0.

This has been fixed by introducing proper manifest constants for the
direction encoding, and using 'offsetof' when calculating GPIO
register offsets.

The updated driver has been tested with the Sparx5 pcb134/pcb135
board, which has the mcp2221 device with several (output) GPIO's.

Fixes: 328de1c5 ("HID: mcp2221: add GPIO functionality support")
Reviewed-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Some HID devices don't use a report ID because they only have a single
report. In those cases, the report ID in struct hid_report will be zero
and the data for the report will start at the first byte, so don't skip
over the first byte.
Signed-off-by: Pablo Ceballos <pceballos@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The i2c-hid driver would quietly fail to probe the i2c-hid sensor-hub
with an ACPI device-id of SMO91D0 every other boot.

Specifically, the i2c_smbus_read_byte() "Make sure there is something at
this address" check would fail every other boot.

It seems that the BIOS does not properly reset/power-cycle the device
leaving it in a confused state where it refuses to respond to i2c-xfers.
On boots where probing the device failed, the driver-core puts the device
in D3 after the probe-failure, which causes the probe to succeed the next
boot.

Putting the device in D3 from the shutdown-handler fixes the sensors not
working every other boot.

This has been tested on both a Lenovo Miix 2-10 and a Dell Venue 8 Pro 5830
both of which use an i2c-hid sensor-hub with an ACPI id of SMO91D0.

Note that it is safe to call acpi_device_set_power() with a NULL pointer
as first argument, so on none ACPI enumerated devices this change is a
no-op.

Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This device needs HID_QUIRK_MULTI_INPUT in order to be presented to userspace
in a consistent way.
Reported-and-tested-by: David Gámiz Jiménez <david.gamiz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M)
exposes media control hotkeys as a USB HID consumer control device, but
these keys do not work in the current (5.8-rc1) kernel due to the
incorrect HID report descriptor. Fix the problem by modifying the
internal HID report descriptor.

More specifically, the keyboard report descriptor specifies the
logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage
boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an
incorrect interpretation of input reports, causing inputs to be ignored.
By setting the Logical Minimum to zero, we align the logical boundary
with the Usage ID boundary.

Some notes:

* There seem to be multiple variants of the VA104M keyboard. This
  patch specifically targets 04b4:07b1 variant.

* The device works out-of-the-box on Windows platform with the generic
  consumer control device driver (hidserv.inf). This suggests that
  Windows either ignores the Logical Minimum/Logical Maximum or
  interprets the Usage ID assignment differently from the linux
  implementation; Maybe there are other devices out there that only
  works on Windows due to this problem?
Signed-off-by: Frank Yang <puilp0502@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The usb-hid keyboard-dock for the Acer Switch 10 SW5-012 model declares
an application and hid-usage page of 0x0088 for the INPUT(4) report which
it sends. This reports contains 2 8-bit fields which are declared as
HID_MAIN_ITEM_VARIABLE.

The keyboard-touchpad combo never actually generates this report, except
when the touchpad is toggled on/off with the Fn + F7 hotkey combo. The
toggle on/off is handled inside the keyboard-dock, when the touchpad is
toggled off it simply stops sending events.

When the touchpad is toggled on/off an INPUT(4) report is generated with
the first content byte set to 120/121, before this commit the kernel
would report this as ABS_MISC 120/121 events.

Patch the descriptor to replace the HID_MAIN_ITEM_VARIABLE with
HID_MAIN_ITEM_RELATIVE (because no key-presss release events are send)
and add mappings for the 0x00880078 and 0x00880079 usages to generate
touchpad on/off key events when the touchpad is toggled on/off.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

It seems that the PID 0x4072 was missing from the list Logitech gave me
for this mouse, as I found one with it in the wild (with which I tested
this patch).

Fixes: 4435ff2f ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Signed-off-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Trust Flex Design Tablet has an UGTizer USB ID and requires the same
initialization as the UGTizer GP0610 to be detected as a graphics tablet
instead of a mouse.
Signed-off-by: Martijn van de Streek <martijn@zeewinde.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - Lenovo X1 Tablet support improvements from Mikael Wikström

 - "heartbeat" report fix for several Wacom devices from Jason Gerecke

 - bounds checking fix in hid-roccat from Dan Carpenter

 - stylus battery reporting fix from Dmitry Torokhov

 - i2c-hid support for wakeup from suspend-to-idle from Kai-Heng Feng

 - new driver for Vivaldi devices from Sean O'Brien

 - other assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle
  HID: add vivaldi HID driver
  HID: hid-input: fix stylus battery reporting
  HID: wacom: Avoid entering wacom_wac_pen_report for pad / battery
  HID: i2c-hid: fix kerneldoc warnings in i2c-hid-core.c
  HID: core: fix kerneldoc warnings in hid-core.c
  HID: multitouch: Lenovo X1 Tablet Gen2 trackpoint and buttons
  HID: multitouch: Lenovo X1 Tablet Gen3 trackpoint and buttons
  HID: alps: clean up indentation issue
  HID: intel-ish-hid: simplify the return expression of ishtp_bus_remove_device()
  HID: hid-debug: fix nonblocking read semantics wrt EIO/ERESTARTSYS
  HID: i2c-hid: Prefer asynchronous probe
  HID: ite: Add USB id match for Acer One S1003 keyboard dock
  HID: roccat: add bounds checking in kone_sysfs_write_settings()
  HID: wiimote: narrow spinlock range in wiimote_hid_event()
  HID: wiimote: make handlers[] const
  HID: apple: Add support for Matias wireless keyboard
  HID: cp2112: Use irqchip template

Pull livepatching update from Jiri Kosina:
 "livepatching kselftest output fix from Miroslav Benes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  selftests/livepatch: Do not check order when using "comm" for dmesg checking

Pull direct-io fix from Jan Kara:
 "Fix for unaligned direct IO read past EOF in legacy DIO code"

* tag 'dio_for_v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  direct-io: defer alignment check until after the EOF check
  direct-io: don't force writeback for reads beyond EOF
  direct-io: clean up error paths of do_blockdev_direct_IO

Pull UDF, reiserfs, ext2, quota fixes from Jan Kara:

 - a couple of UDF fixes for issues found by syzbot fuzzing

 - a couple of reiserfs fixes for issues found by syzbot fuzzing

 - some minor ext2 cleanups

 - quota patches to support grace times beyond year 2038 for XFS quota
   APIs

* tag 'fs_for_v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: Fix oops during mount
  udf: Limit sparing table size
  udf: Remove pointless union in udf_inode_info
  udf: Avoid accessing uninitialized data on failed inode read
  quota: clear padding in v2r1_mem2diskdqb()
  reiserfs: Initialize inode keys properly
  udf: Fix memory leak when mounting
  udf: Remove redundant initialization of variable ret
  reiserfs: only call unlock_new_inode() if I_NEW
  ext2: Fix some kernel-doc warnings in balloc.c
  quota: Expand comment describing d_itimer
  quota: widen timestamps for the fs_disk_quota structure
  reiserfs: Fix memory leak in reiserfs_parse_options()
  udf: Use kvzalloc() in udf_sb_alloc_bitmap()
  ext2: remove duplicate include

Pull configfs updates from Christoph Hellwig:
 "Various cleanups for the configfs samples (Bartosz Golaszewski)"

* tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfs:
  samples: configfs: prefer pr_err() over bare printk(KERN_ERR
  samples: configfs: don't use spaces before tabs
  samples: configfs: consolidate local variables of the same type
  samples: configfs: don't reinitialize variables which are already zeroed
  samples: configfs: replace simple_strtoul() with kstrtoint()
  samples: configfs: fix alignment in item struct
  samples: configfs: drop unnecessary ternary operators
  samples: configfs: remove redundant newlines
  MAINTAINERS: add the sample directory to the configfs entry

Pull dma-mapping updates from Christoph Hellwig:

 - rework the non-coherent DMA allocator

 - move private definitions out of <linux/dma-mapping.h>

 - lower CMA_ALIGNMENT (Paul Cercueil)

 - remove the omap1 dma address translation in favor of the common code

 - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)

 - support per-node DMA CMA areas (Barry Song)

 - increase the default seg boundary limit (Nicolin Chen)

 - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)

 - various cleanups

* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
  ARM/ixp4xx: add a missing include of dma-map-ops.h
  dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
  dma-direct: factor out a dma_direct_alloc_from_pool helper
  dma-direct check for highmem pages in dma_direct_alloc_pages
  dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
  dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
  dma-mapping: move dma-debug.h to kernel/dma/
  dma-mapping: remove <asm/dma-contiguous.h>
  dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
  dma-contiguous: remove dma_contiguous_set_default
  dma-contiguous: remove dev_set_cma_area
  dma-contiguous: remove dma_declare_contiguous
  dma-mapping: split <linux/dma-mapping.h>
  cma: decrease CMA_ALIGNMENT lower limit to 2
  firewire-ohci: use dma_alloc_pages
  dma-iommu: implement ->alloc_noncoherent
  dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
  dma-mapping: add a new dma_alloc_pages API
  dma-mapping: remove dma_cache_sync
  53c700: convert to dma_alloc_noncoherent
  ...

Pull dmaengine updates from Vinod Koul:
 "Core:

   - Mark dma_request_slave_channel() deprecated in favour of
     dma_request_chan()

   - subsystem conversion for tasklet_setup() API

   - subsystem removal of local dma_parms for arm drivers

  Also updates to bunch of driver notably TI, DW and AXI-DMAC"

* tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (104 commits)
  dmaengine: owl-dma: fix kernel-doc style for enum
  dmaengine: zynqmp_dma: fix kernel-doc style for tasklet
  dmaengine: xilinx_dma: fix kernel-doc style for tasklet
  dmaengine: qcom: bam_dma: fix kernel-doc style for tasklet
  dmaengine: altera-msgdma: fix kernel-doc style for tasklet
  dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() API
  dmaengine: sf-pdma: convert tasklets to use new tasklet_setup() API
  dt-bindings: Fix 'reg' size issues in zynqmp examples
  dmaengine: rcar-dmac: drop double zeroing
  dmaengine: sh: drop double zeroing
  dmaengine: ioat: Allocate correct size for descriptor chunk
  dmaengine: ti: k3-udma: use devm_platform_ioremap_resource_byname
  dmaengine: fsl: remove bad channel update
  dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_status
  dmaengine: pl330: fix argument for tasklet
  dmaengine: dmatest: Return boolean result directly in filter()
  dmaengine: dmatest: Check list for emptiness before access its last entry
  dmaengine: ti: k3-udma-glue: fix channel enable functions
  dmaengine: iop-adma: Fix pointer cast warnings
  dmaengine: dw-edma: Fix Using plain integer as NULL pointer in dw-edma-v0-debugfs.c
  ...

- i2c-hid support for wakeup from suspend-to-idle

Many laptops can be woken up from Suspend-to-Idle by touchpad. This is
also the default behavior on other OSes.

However, if touchpad and touchscreen contact to each other when lid is
closed, wakeup events can be triggered inadventertly.

So let's disable the wakeup by default, but enable the wakeup capability
so users can enable it at their own discretion.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- "heartbeat" report fix for several Wacom devices
- Lenovo X1 Tablet support improvements
- new device IDs
- bounds checking fix in hid-roccat
- stylus battery reporting fix

- code cleanups for hid-wiimote

- driver for Vivaldi devices (keyboards which provide vendor-defined (Google)
  usages in their descriptor)

- intel-ish-hid code cleanup

- prefer async probing in i2c-hid even if built-in

- make cp2112 driver use irqchip template properly

- nonblocking read semantics fix for hid-debug

- support for Matias wireless (identifies itself as ISO RevB Alu)

Pull sound updates from Takashi Iwai:
 "The amount of changes is smaller at this round (what a surprise), but
  lots of activity is seen. Most of changes are about ASoC driver
  development, especially Intel platforms. Here are some highlights:

  General:
   - Replace all tasklet usages with other alternatives
   - Cleanup of the ASoC error unwinding code
   - Fixes for trivial issues caught by static checker
   - Spell fixes allover the places

  ALSA Core:
   - Lockdep fix for control devices
   - Fix for potential OSS sequencer mutex stalls

  HD-audio and USB-audio:
   - SoundBlaster AE-7 support
   - Changes in quirk table for the rename handling
   - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.

  ASoC:
   - Lots of updates for Intel SOF and SoundWire enablement
   - Replacement of the DSP driver for some older x86 systems; the new
     code was written from scratch, better maintenance expected
   - Helpers for parsing auxiluary devices from the device tree
   - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
     Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
     Instruments J721E, TAS2110, TAS2564 and TAS2764"

* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
  ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
  ALSA: hda: fix jack detection with Realtek codecs when in D3
  ALSA: fireworks: use semicolons rather than commas to separate statements
  ALSA: hda: use semicolons rather than commas to separate statements
  ALSA: hda/i915 - fix list corruption with concurrent probes
  ASoC: dmaengine: Document support for TX only or RX only streams
  ASoC: mchp-spdiftx: remove 'TX' from playback stream name
  ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
  ASoC: tas2764: Add the driver for the TAS2764
  dt-bindings: tas2764: Add the TAS2764 binding doc
  ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
  ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
  ASoC: stm32: dfsdm: add actual resolution trace
  ASoC: stm32: dfsdm: change rate limits
  ASoC: qcom: sc7180: Add support for audio over DP
  Asoc: qcom: lpass-platform : Increase buffer size
  ASoC: qcom: Add support for lpass hdmi driver
  Asoc: qcom: lpass:Update lpaif_dmactl members order
  Asoc:qcom:lpass-cpu:Update dts property read API
  ASoC: dt-bindings: Add dt binding for lpass hdmi
  ...

Pull drm updates from Dave Airlie:
 "Not a major amount of change, the i915 trees got split into display
  and gt trees to better facilitate higher level review, and there's a
  major refactoring of i915 GEM locking to use more core kernel concepts
  (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
  get DC support, nouveau got a bump in displayport support with common
  code extraction from i915.

  Outside of drm this contains a couple of patches for hexint
  moduleparams which you've acked, and a virtio common code tree that
  you should also get via it's regular path.

  New driver:
   - Cadence MHDP8546 DisplayPort bridge driver

  core:
   - cross-driver scatterlist cleanups
   - devm_drm conversions
   - remove drm_dev_init
   - devm_drm_dev_alloc conversion

  ttm:
   - lots of refactoring and cleanups

  bridges:
   - chained bridge support in more drivers

  panel:
   - misc new panels

  scheduler:
   - cleanup priority levels

  displayport:
   - refactor i915 code into helpers for nouveau

  i915:
   - split into display and GT trees
   - WW locking refactoring in GEM
   - execbuf2 extension mechanism
   - syncobj timeline support
   - GEN 12 HOBL display powersaving
   - Rocket Lake display additions
   - Disable FBC on Tigerlake
   - Tigerlake Type-C + DP improvements
   - Hotplug interrupt refactoring

  amdgpu:
   - Sienna Cichlid updates
   - Navy Flounder updates
   - DCE6 (SI) support for DC
   - Plane rotation enabled
   - TMZ state info ioctl
   - PCIe DPC recovery support
   - DC interrupt handling refactor
   - OLED panel fixes

  amdkfd:
   - add SMI events for thermal throttling
   - SMI interface events ioctl update
   - process eviction counters

  radeon:
   - move to dma_ for allocations
   - expose sclk via sysfs

  msm:
   - DSI support for sm8150/sm8250
   - per-process GPU pagetable support
   - Displayport support

  mediatek:
   - move HDMI phy driver to PHY
   - convert mtk-dpi to bridge API
   - disable mt2701 tmds

  tegra:
   - bridge support

  exynos:
   - misc cleanups

  vc4:
   - dual display cleanups

  ast:
   - cleanups

  gma500:
   - conversion to GPIOd API

  hisilicon:
   - misc reworks

  ingenic:
   - clock handling and format improvements

  mcde:
   - DSI support

  mgag200:
   - desktop g200 support

  mxsfb:
   - i.MX7 + i.MX8M
   - alpha plane support

  panfrost:
   - devfreq support
   - amlogic SoC support

  ps8640:
   - EDID from eDP retrieval

  tidss:
   - AM65xx YUV workaround

  virtio:
   - virtio-gpu exported resources

  rcar-du:
   - R8A7742, R8A774E1 and R8A77961 support
   - YUV planar format fixes
   - non-visible plane handling
   - VSP device reference count fix
   - Kconfig fix to avoid displaying disabled options in .config"

* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
  drm/ingenic: Fix bad revert
  drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
  drm/amdgpu: Remove warning for virtual_display
  drm/amdgpu: kfd_initialized can be static
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/amdgpu: prevent spurious warning
  drm/amdgpu/swsmu: fix ARC build errors
  drm/amd/display: Fix OPTC_DATA_FORMAT programming
  drm/amd/display: Don't allow pstate if no support in blank
  drm/panfrost: increase readl_relaxed_poll_timeout values
  MAINTAINERS: Update entry for st7703 driver after the rename
  Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
  drm/amd/display: HDMI remote sink need mode validation for Linux
  drm/amd/display: Change to correct unit on audio rate
  drm/amd/display: Avoid set zero in the requested clk
  drm/amdgpu: align frag_end to covered address space
  drm/amdgpu: fix NULL pointer dereference for Renoir
  drm/vmwgfx: fix regression in thp code due to ttm init refactor.
  drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
  drm/amdgpu/swsmu: add interrupt work function
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char, misc, and other assorted driver subsystem
  patches for 5.10-rc1.

  There's a lot of different things in here, all over the drivers/
  directory. Some summaries:

   - soundwire driver updates

   - habanalabs driver updates

   - extcon driver updates

   - nitro_enclaves new driver

   - fsl-mc driver and core updates

   - mhi core and bus updates

   - nvmem driver updates

   - eeprom driver updates

   - binder driver updates and fixes

   - vbox minor bugfixes

   - fsi driver updates

   - w1 driver updates

   - coresight driver updates

   - interconnect driver updates

   - misc driver updates

   - other minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
  binder: fix UAF when releasing todo list
  docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
  misc: Kconfig: fix a HISI_HIKEY_USB dependency
  LSM: Fix type of id parameter in kernel_post_load_data prototype
  misc: Kconfig: add a new dependency for HISI_HIKEY_USB
  firmware_loader: fix a kernel-doc markup
  w1: w1_therm: make w1_poll_completion static
  binder: simplify the return expression of binder_mmap
  test_firmware: Test partial read support
  firmware: Add request_partial_firmware_into_buf()
  firmware: Store opt_flags in fw_priv
  fs/kernel_file_read: Add "offset" arg for partial reads
  IMA: Add support for file reads without contents
  LSM: Add "contents" flag to kernel_read_file hook
  module: Call security_kernel_post_load_data()
  firmware_loader: Use security_post_load_data()
  LSM: Introduce kernel_post_load_data() hook
  fs/kernel_read_file: Add file_size output argument
  fs/kernel_read_file: Switch buffer size arg to size_t
  fs/kernel_read_file: Remove redundant size argument
  ...

Pull USB/PHY/Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB, PHY, and Thunderbolt driver updates for
  5.10-rc1.

  Lots of tiny different things for these subsystems are in here,
  including:

   - phy driver updates

   - thunderbolt / USB 4 updates and additions

   - USB gadget driver updates

   - xhci fixes and updates

   - typec driver additions and updates

   - api conversions to various drivers for core kernel api changes

   - new USB control message functions to make it harder to get wrong,
     as found by syzbot (took 2 tries to get it right)

   - lots of tiny USB driver fixes and updates all over the place

  All of these have been in linux-next for a while, with the exception
  of the last "obviously correct" patch that updated a FALLTHROUGH
  comment that got merged last weekend"

* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
  usb: musb: gadget: Use fallthrough pseudo-keyword
  usb: typec: Add QCOM PMIC typec detection driver
  USB: serial: option: add Cellient MPL200 card
  usb: typec: tcpci_maxim: Add support for Sink FRS
  usb: typec: tcpci: Implement callbacks for FRS
  usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
  usb: typec: tcpci_maxim: Chip level TCPC driver
  usb: typec: tcpci: Add set_vbus tcpci callback
  usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
  usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
  usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
  USB: serial: ftdi_sio: use cur_altsetting for consistency
  USB: serial: option: Add Telit FT980-KS composition
  USB: core: remove polling for /sys/kernel/debug/usb/devices
  usb: typec: add support for STUSB160x Type-C controller family
  usb: typec: add typec_find_pwr_opmode
  usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
  dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
  dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
  usb: dwc2: Fix INTR OUT transfers in DDMA mode.
  ...

Pull staging / IIO driver updates from Greg KH:
 "Here is the large set of staging and IIO driver updates for 5.10-rc1.

  Included in here are:

   - new IIO drivers

   - new IIO driver frameworks

   - various IIO driver fixes and updates

   - IIO device tree conversions to yaml

   - so many minor staging driver coding style cleanups

   - most cdev driver moved out of staging

   - no staging drivers added or removed

  Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits)
  staging: comedi: check validity of wMaxPacketSize of usb endpoints found
  staging: wfx: improve robustness of wfx_get_hw_rate()
  staging: wfx: drop unicode characters from strings
  staging: wfx: gpiod_get_value() can return an error
  staging: wfx: increase robustness of hif_generic_confirm()
  staging: wfx: wfx_init_common() returns NULL on error
  staging: wfx: standardize the error when vif does not exist
  staging: wfx: check memory allocation
  staging: wfx: improve error handling of hif_join()
  staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c
  staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c
  staging: rtl8188eu: Fix long lines
  dt-bindings: staging: wfx: silabs,wfx yaml conversion
  staging: wfx: update copyrights dates
  staging: wfx: fix QoS priority for slow buses
  staging: wfx: fix BA sessions for older firmwares
  staging: wfx: remove remaining code of 'secure link' feature
  staging: wfx: fix handling of MMIC error
  staging: vchiq: Fix list_for_each exit tests
  staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t
  ...

Pull SPDX updates from Greg KH:
 "Here are some SPDX-specific changes for 5.10-rc1.

  They include:

   - driver fixes to make spdxcheck.pl work properly

   - add GFDL licenses as "deprecated" but required due to some of our
     documentation using them

   - add Zlib license as "deprecated" but required because we have code
     with this license in the tree.

   - convert some drivers to have SPDX identifiers that previously
     didn't have them.

  All have been in linux-next for a very long time with no reported
  issues"

* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  scripts/spdxcheck.py: handle license identifiers in XML comments
  net/mlx5: IPsec: make spdxcheck.py happy
  LICENSES/deprecated: add Zlib license text
  LICENSE: add GFDL deprecated licenses
  net/qla3xxx: Convert to SPDX license identifiers
  net/qlge: Convert to SPDX license identifiers
  net/qlcnic: Convert to SPDX license identifiers
  scsi/qla2xxx: Convert to SPDX license identifiers
  scsi/qla4xxx: Convert to SPDX license identifiers

Merge tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.10-rc1

  They include a lot of different things, all related to the driver core
  and/or some driver logic:

   - sysfs common write functions to make it easier to audit sysfs
     attributes

   - device connection cleanups and fixes

   - devm helpers for a few functions

   - NOIO allocations for when devices are being removed

   - minor cleanups and fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
  regmap: debugfs: use semicolons rather than commas to separate statements
  platform/x86: intel_pmc_core: do not create a static struct device
  drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
  drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show
  mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
  drivers core: Miscellaneous changes for sysfs_emit
  drivers core: Reindent a couple uses around sysfs_emit
  drivers core: Remove strcat uses around sysfs_emit and neaten
  drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
  sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output
  dyndbg: use keyword, arg varnames for query term pairs
  driver core: force NOIO allocations during unplug
  platform_device: switch to simpler IDA interface
  driver core: platform: Document return type of more functions
  Revert "driver core: Annotate dev_err_probe() with __must_check"
  Revert "test_firmware: Test platform fw loading on non-EFI systems"
  iio: adc: xilinx-xadc: use devm_krealloc()
  hwmon: pmbus: use more devres helpers
  devres: provide devm_krealloc()
  syscore: Use pm_pr_dbg() for syscore_{suspend,resume}()
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.10-rc1.

  Lots of little things in here, including:

   - tasklet_setup api conversions

   - sysrq support for capital letters

   - vt and vc cleanups and unwinding the mess some more

   - serial driver updates and minor tweaks

   - new device ids

   - rs485 support for some drivers

   - serial binding documentation updates

   - lots of small serial driver changes for reported issues

  All have been in linux-next for a while with no reported issues"

* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  serial: mcf: add sysrq capability
  serial: fsl_lpuart: add sysrq support when using dma
  fbcon: remove no-op fbcon_set_origin()
  tty/sysrq: Extend the sysrq_key_table to cover capital letters
  serial: max310x: rework RX interrupt handling
  serial: 8250_dw: Fix clk-notifier/port suspend deadlock
  serial: 8250: Skip uninitialized TTY port baud rate update
  serial: 8250: Discard RTS/DTS setting from clock update method
  tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
  serial: 8250_fsl: Fix TX interrupt handling condition
  serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
  tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
  tty: serial: lpuart: fix lpuart32_write usage
  serial: qcom_geni_serial: To correct QUP Version detection logic
  serial: mvebu-uart: fix unused variable warning
  vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
  serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
  tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  pch_uart: drop double zeroing
  ...

A recent change to the checksum code removed usage of some extra
arguments, alongside with storage on the stack for those, and the stack
pointer no longer needed to be adjusted in the function prologue.

But a left over subtraction wasn't removed in the function epilogue,
causing the function to return with the stack pointer moved 16 bytes
away from where it should have.  This corrupted local state and lead to
weird crashes.

This simply removes the leftover instruction from the epilogue.

Fixes: 70d65cd5 ("ppc: propagate the calling conventions change down to csum_partial_copy_generic()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull backlight updates from Lee Jones:
 "New Drivers:
   - Add support for KTD253

  Fix-ups:
   - Add Device Tree documentation; common, kinetic,ktd253
   - Use correct header(s); tosa_lcd, tosa_bl

  Bug Fixes:
   - Fix refcount imbalance; sky81452-backlight"

* tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: tosa_bl: Include the right header
  backlight: tosa_lcd: Include the right header
  backlight: Add Kinetic KTD253 backlight driver
  dt-bindings: backlight: Add Kinetic KTD253 bindings
  dt-bindings: backlight: Add some common backlight properties
  backlight: sky81452-backlight: Fix refcount imbalance on error

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for initialising shared (between children) Regmaps
   - Add support for Kontron SL28CPLD
   - Add support for ENE KB3930 Embedded Controller
   - Add support for Intel FPGA PAC MAX 10 BMC

  New Device Support:
   - Add support for Power to Ricoh RN5T618
   - Add support for UART to Intel Lakefield
   - Add support for LP87524_Q1 to Texas Instruments LP87565

  New Functionality:
   - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
   - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
   - Use new GPIOD API; dm355evm_msp
   - Add wake-up capability; sprd-sc27xx-spi
   - Add ACPI support; kempld-core

  Fix-ups:
   - Trivial (spelling/whitespace); Kconfig, ab8500
   - Fix for unused variables; khadas-mcu, kempld-core
   - Remove unused header file(s); mt6360-core
   - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
   - Add COMPILE_TEST support; asic3, tmio_core
   - Add dependency on I2C; SL28CPLD

  Bug Fixes:
   - Fix memory leak(s); sm501
   - Do not free regmap_config's 'name' until exit; syscon"

* tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits)
  mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI
  mfd: sl28cpld: Depend on I2C
  mfd: asic3: Build if COMPILE_TEST=y
  dt-bindings: mfd: Correct interrupt flags in examples
  mfd: Add ACPI support to Kontron PLD driver
  mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
  mfd: lp87565: Add LP87524-Q1 variant
  dt-bindings: mfd: Add LP87524-Q1
  dt-bindings: mfd: lp87565: Convert to yaml
  mfd: mt6360: Remove unused include <linux/version.h>
  mfd: sm501: Fix leaks in probe()
  mfd: syscon: Don't free allocated name for regmap_config
  dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles
  dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings
  dt-bindings: mfd: ab8500: Remove weird Unicode characters
  mfd: sprd: Add wakeup capability for PMIC IRQ
  mfd: intel-lpss: Add device IDs for UART ports for Lakefield
  mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
  mfd: wcd934x: Simplify with dev_err_probe()
  mfd: stmfx: Simplify with dev_err_probe()
  ...

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream version v1.6.0-31-gcbca977ea121

 - dtx_diff help text reformatting

 - Speed-up validation time for binding and dtb checks using json for
   intermediate files

 - Add support for running yamllint on DT schema files

 - Remove old booting-without-of.rst

 - Extend the example schema to address common issues

 - Cleanup handling of additionalProperties/unevaluatedProperties

 - Ensure all DSI controller schemas reference dsi-controller.yaml

 - Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
   DFI, and Cisco Meraki

 - Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
   SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
   schema

 - Convert HiSilicon SoC and syscon bindings to DT schema

 - Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema

 - Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
   GPIO, and UART to DT schema

 - Add i.MX 8M compatible strings

 - Add LM81 and DS1780 as trivial devices

 - Various missing properties added to fix dtb validation warnings

* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
  dt-bindings: misc: explicitly add #address-cells for slave mode
  spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
  dt: Remove booting-without-of.rst
  dt-bindings: update usb-c-connector example
  dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
  dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
  dt-bindings: pwm: imx: document i.MX compatibles
  scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
  dt-bindings: Add running yamllint to dt_binding_check
  dt-bindings: powerpc: Add a schema for the 'sleep' property
  dt-bindings: pinctrl: sirf: Fix typo abitrary
  dt-bindings: pinctrl: qcom: Fix typo abitrary
  dt-bindings: Explicitly allow additional properties in common schemas
  dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  dt-bindings: Add missing 'unevaluatedProperties'
  Docs: Fixing spelling errors in Documentation/devicetree/bindings/
  dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
  dt-bindings: riscv: convert pwm bindings to json-schema
  dt-bindings: riscv: convert plic bindings to json-schema
  dt-bindings: fu540: prci: convert PRCI bindings to json-schema
  ...

Pull pin control updates from Linus Walleij:
 "Core changes:

   - NONE whatsoever, we don't even touch the core files this time
     around.

  New drivers:

   - New driver for the Toshiba Visconti SoC.

   - New subdriver for the Qualcomm MSM8226 SoC.

   - New subdriver for the Actions Semiconductor S500 SoC.

   - New subdriver for the Mediatek MT8192 SoC.

   - New subdriver for the Microchip SAMA7G5 SoC.

  Driver enhancements:

   - Intel Cherryview and Baytrail cleanups and refactorings.

   - Enhanced support for the Renesas R8A7790, more pins and groups.

   - Some optimizations for the MCP23S08 MCP23x17 variant.

   - Some cleanups around the Actions Semiconductor subdrivers.

   - A bunch of cleanups around the SH-PFC and Emma Mobile drivers.

   - The "SH-PFC" (literally SuperH pin function controller, I think)
     subdirectory is now renamed to the more neutral "renesas", as these
     are not very much centered around SuperH anymore.

   - Non-critical fixes for the Aspeed driver.

   - Non-critical fixes for the Ingenic (MIPS!) driver.

   - Fix a bunch of missing pins on the AMD pinctrl driver"

* tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits)
  pinctrl: amd: Add missing pins to the pin group list
  dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks
  pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI
  pinctrl: mediatek: Free eint data on failure
  pinctrl: single: fix debug output when #pinctrl-cells = 2
  pinctrl: single: fix pinctrl_spec.args_count bounds check
  pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent
  pinctrl: cannonlake: Modify COMMUNITY macros to be consistent
  pinctrl: tigerlake: Fix register offsets for TGL-H variant
  pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2
  pinctrl: mediatek: use devm_platform_ioremap_resource_byname()
  pinctrl: nuvoton: npcm7xx: Constify static ops structs
  pinctrl: mediatek: mt7622: add antsel pins/groups
  pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register()
  pinctrl: at91-pio4: add support for sama7g5 SoC
  dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5
  pinctrl: spear: simplify the return expression of tvc_connect()
  pinctrl: spear: simplify the return expression of spear310_pinctrl_probe
  pinctrl: sprd: use module_platform_driver to simplify the code
  pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs.
  ...

Pull LED updates from Pavel Machek:
 "Quite a lot of stuff is going on here. Great cleanups/fixes from Marek
  and others are biggest part.

  I limited CPU LED trigger to 8 LEDs, because it was willing to
  register 1024 'triggers' on machine with 1024 CPUs. I don't believe it
  will cause any problems, but we can raise the limit if it does"

* tag 'leds-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (84 commits)
  leds: pwm: Remove platform_data support
  leds: lm3697: Fix out-of-bound access
  leds: ns2: do not guard OF match pointer with of_match_ptr
  leds: ns2: convert to fwnode API
  leds: tlc591xx: fix leak of device node iterator
  leds: pca963x: use struct led_init_data when registering
  leds: pca963x: register LEDs immediately after parsing, get rid of platdata
  leds: tca6507: remove binding comment
  leds: tca6507: cosmetic change: use helper variable
  leds: tca6507: do not set GPIO names
  dt-bindings: leds: tca6507: convert to YAML
  ledtrig-cpu: Limit to 8 CPUs
  leds: TODO: Add documentation about possible subsystem improvements
  leds: pca9532: read pwm settings from device tree
  leds: pca9532: correct shift computation in pca9532_getled
  leds: lm36274: Fix warning for undefined parameters
  leds: lm3532: Fix warnings for undefined parameters
  leds: pca963x: use flexible array
  leds: pca963x: cosmetic: rename variables
  leds: pca963x: cosmetic: rename variables
  ...