- 26 Sep, 2022 13 commits
-
-
Vladimir Oltean authored
taprio_dev_notifier() subscribes to netdev state changes in order to determine whether interfaces which have a taprio root qdisc have changed their link speed, so the internal calculations can be adapted properly. The 'qdev' temporary variable serves no purpose, because we just use it only once, and can just as well use qdisc_dev(q->root) directly (or the "dev" that comes from the netdev notifier; this is because qdev is only interesting if it was the subject of the state change, _and_ its root qdisc belongs in the taprio list). The 'found' variable also doesn't really serve too much of a purpose either; we can just call taprio_set_picos_per_byte() within the loop, and exit immediately afterwards. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Gaosheng Cui says: ==================== Remove useless inline functions from net ==================== Link: https://lore.kernel.org/r/20220922083857.1430811-1-cuigaosheng1@huawei.comSigned-off-by:
-
Gaosheng Cui authored
All uses of dst_hold_and_use() have been removed since commit 1202cdd6 ("Remove DECnet support from kernel"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Gaosheng Cui authored
All uses of sk_nulls_node_init() have been removed since commit dbca1596 ("ping: convert to RCU lookups, get rid of rwlock"), so remove it. Signed-off-by:
-
Gaosheng Cui authored
All uses of neigh_key_eq16() have been removed since commit 1202cdd6 ("Remove DECnet support from kernel"), so remove it. Signed-off-by:
-
Gaosheng Cui authored
Remove all the code about SFTR-V2 Register which have been deprecated since commit 77b7f83d ("mlxsw: Enable unified bridge model"). Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
As pointed out during review, currently the following set of commands crashes the kernel: $ ip netns add ns0 $ ip link set swp0 netns ns0 $ ip netns del ns0 WARNING: CPU: 1 PID: 27 at net/core/dev.c:10884 unregister_netdevice_many+0xaa4/0xaec Workqueue: netns cleanup_net pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : unregister_netdevice_many+0xaa4/0xaec lr : unregister_netdevice_many+0x700/0xaec Call trace: unregister_netdevice_many+0xaa4/0xaec default_device_exit_batch+0x294/0x340 ops_exit_list+0xac/0xc4 cleanup_net+0x2e4/0x544 process_one_work+0x4ec/0xb40 ---[ end trace 0000000000000000 ]--- unregister_netdevice: waiting for swp0 to become free. Usage count = 2 This is because since DSA user ports, since they started populating dev->rtnl_link_ops in the blamed commit, gained a different treatment from default_device_exit_net(), which thinks these interfaces can now be unregistered. They can't; so set netns_refund = true to restore the behavior prior to populating dev->rtnl_link_ops. Fixes: 95f510d0 ("net: dsa: allow the DSA master to be seen and changed through rtnetlink") Suggested-by:
-
Jesper Dangaard Brouer authored
During LPC2022 I meetup with my page_pool co-maintainer Ilias. When discussing page_pool code we realised/remembered certain optimizations had not been fully utilised. Since commit c07aea3e ("mm: add a signature in struct page") struct page have a direct pointer to the page_pool object this page was allocated from. Thus, with this info it is possible to skip the rhashtable_lookup to find the page_pool object in __xdp_return(). The rcu_read_lock can be removed as it was tied to xdp_mem_allocator. The page_pool object is still safe to access as it tracks inflight pages and (potentially) schedules final release from a work queue. Created a micro benchmark of XDP redirecting from mlx5 into veth with XDP_DROP bpf-prog on the peer veth device. This increased performance 6.5% from approx 8.45Mpps to 9Mpps corresponding to using 7 nanosec (27 cycles at 3.8GHz) less per packet. Suggested-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by:
-
Anand Moon authored
Rockchip RV1126 has GMAC 10/100/1000M ethernet controller via RGMII and RMII interfaces are configured via M0 and M1 pinmux. This patch adds rv1126 support by adding delay lines of M0 and M1 simultaneously. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
David Wu <david.wu@rock-chips.com> Signed-off-by:
Anand Moon <anand@edgeble.ai> Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220920140944.2535-2-anand@edgeble.aiSigned-off-by:
-
Anand Moon authored
Add compatible string for RV1126 gmac, and constrain it to be compatible with Synopsys dwmac 4.20a. Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Peilin Ye authored
Similar to udp_read_skb(), delete the unnecessary while loop in unix_read_skb() for readability. Since recv_actor() cannot return a value greater than skb->len (see sk_psock_verdict_recv()), remove the redundant check. Suggested-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/7009141683ad6cd3785daced3e4a80ba0eb773b5.1663909008.git.peilin.ye@bytedance.comSigned-off-by:
-
Peilin Ye authored
Delete the unnecessary while loop in udp_read_skb() for readability. Additionally, since recv_actor() cannot return a value greater than skb->len (see sk_psock_verdict_recv()), remove the redundant check. Suggested-by:
-
Sabrina Dubroca authored
Commit 0a28bfd4 added a metadata_dst to each tx_sc, but that's only allocated when macsec_add_dev has run, which happens after device registration. If the requested or computed SCI already exists, or if linking to the lower device fails, we will panic because metadata_dst_free can't handle NULL. Reproducer: ip link add link $lower type macsec ip link add link $lower type macsec Fixes: 0a28bfd4 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/60f2a1965fe553e2cade9472407d0fafff8de8ce.1663923580.git.sd@queasysnail.netSigned-off-by:
-
- 24 Sep, 2022 10 commits
-
-
Eric Dumazet authored
Blamed commit added a txhash parameter to tcp_v6_send_response() but forgot to update tcp_v6_send_reset() accordingly. Fixes: aa51b80e ("ipv6: tcp: send consistent autoflowlabel in SYN_RECV state") Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220922165036.1795862-1-eric.dumazet@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: another set of cleanups This series contains another set of cleanups done in preparation for an upcoming series that reworks how IPA registers and their fields are defined. The first replaces the use of u32_replace_bits() with a simple logical AND operation in two places. The second creates a new function to encapsulate some common code, and renames another for consistency. The third restructures two other functions that do similar things to make their similarity more obvious. The fourth defines the flag bits in a register using an enumerated type. And the fifth updates "ipa_reg.h" so the values assigned to enumerated type members are aligned consistently. The last three encapsulate the code that assigns values to a few registers into separate functions. ==================== Link: https://lore.kernel.org/r/20220922222100.2543621-1-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the BCR, TX_CFG, and CLKON_CFG register values during hardware configuration. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the counter configuration register value for versions prior to IPA v4.5. Create another small function to represent configuring hardware timing regardless of version. Signed-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the register flag that disables filter and routing table hashing for IPA v4.2. Signed-off-by:
-
Alex Elder authored
Update a few enumerated type definitions in "ipa_reg.h" so that the values assigned to each member align on the same column. Where a "TX" or "RX" (or both) comment is present, move that annotation into a separate comment between the member name and its value. Signed-off-by:
-
Alex Elder authored
The backward compatibility register (BCR) has a set of bit flags that indicate ways in which the IPA hardware should operate in a backward compatible way. The register is not supported starting with IPA v4.5, and where it is supported, defined bits all have the same numeric value. Redefine these flags using an enumerated type, with each member's value representing the bit position that encodes it in the BCR. This replaces all of the single-bit field masks previously defined. Signed-off-by:
-
Alex Elder authored
Both aggr_time_limit_encode() and hol_block_timer_encode() figure out how to encode a millisecond time value so it can be programmed into a register. Rearranging them a bit can make their similarity more obvious, with both taking essentially the same form. To do this: - Return 0 immediately in aggr_time_limit_encode() if the microseconds value supplied is zero. - Reverse the test at top of aggr_time_limit_encode(), so we compute and return the Qtime value in the "true" block, and compute the result the old way otherwise. - Open-code (and eliminate) hol_block_timer_qtime_encode() at the top of hol_block_timer_encode() in the case we use Qtimer. Signed-off-by: -
Alex Elder authored
Create a new function ipa_qtime_val() which returns a value that indicates what should be encoded for a register with a time field expressed using Qtime. Use it to factor out common code in aggr_time_limit_encoded() and hol_block_timer_qtime_val(). Rename aggr_time_limit_encoded() and hol_block_timer_qtime_val() so their names are both verbs ending in "encode". Rename the "limit" argument to the former to be "milliseconds" for consistency. Signed-off-by:
-
Alex Elder authored
In two spots we use u32_replace_bits() to replace a set of bits in a register while preserving the rest. Both of those cases just zero the bits being replaced, and this can be done more simply without using that function. Signed-off-by:
-
- 23 Sep, 2022 17 commits
-
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-09-23 The first 2 patches are by Ziyang Xuan and optimize registration and the sending in the CAN BCM protocol a bit. The next 8 patches target the gs_usb driver. 7 are by me and first fix the time hardware stamping support (added during this net-next cycle), rename a variable, convert the usb_control_msg + manual kmalloc()/kfree() to usb_control_msg_{send,rev}(), clean up the error handling and add switchable termination support. The patch by Rhett Aultman and Vasanth Sadhasivan convert the driver from usb_alloc_coherent()/usb_free_coherent() to kmalloc()/URB_FREE_BUFFER. The last patch is by Shang XiaoJing and removes an unneeded call to dev_err() from the ctucanfd driver. * tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ctucanfd: Remove redundant dev_err call can: gs_usb: remove dma allocations can: gs_usb: add switchable termination support can: gs_usb: gs_make_candev(): clean up error handling can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}() can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev can: gs_usb: gs_can_open(): initialize time counter before starting device can: gs_usb: add missing lock to protect struct timecounter::cycle_last can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv() can: bcm: check the result of can_send() in bcm_can_tx() can: bcm: registration process optimization in bcm_module_init() ==================== Link: https://lore.kernel.org/r/20220923120859.740577-1-mkl@pengutronix.deSigned-off-by:
-
Jakub Kicinski authored
Antoine Tenart says: ==================== net: macsec: remove the preparation phase when offloading operations It was reported[1] the 2-step phase offloading of MACsec operations did not fit well and device drivers were mostly ignoring the first phase (preparation). In addition the s/w fallback in case h/w rejected an operation, which could have taken advantage of this design, never was implemented and it's probably not a good idea anyway (at least unconditionnally). So let's remove this logic which only makes the code more complex for no advantage, before there are too many drivers providing MACsec offloading. This series removes the first phase (preparation) of the MACsec h/w offloading. The modifications are split per-driver and in a way that makes bissection working with logical steps; but I can squash some patches if needed. This was tested on the MSCC PHY but not on the Altantic nor mlx5e NICs. [1] https://lore.kernel.org/all/166322893264.61080.12133865599607623050@kwain/T/ ==================== Link: https://lore.kernel.org/r/20220921135118.968595-1-atenart@kernel.orgSigned-off-by:
-
Antoine Tenart authored
Now that the MACsec offloading preparation phase was removed from the MACsec core implementation as well as from drivers implementing it, we can safely remove the flag representing it. Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Antoine Tenart authored
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by:
-
Antoine Tenart authored
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by:
-
Antoine Tenart authored
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by:
-
Antoine Tenart authored
The hardware offloading in MACsec was initially supported using 2 phases. This was proposed in the RFC as this could have allowed easier fallback to the software implementation if the hardware did not support a feature or had enough entries already. But this fallback wasn't implemented and might not be a good idea after all. In addition it turned out this logic didn't mapped well the hardware logic and device drivers were mostly ignoring the preparation phase. Let's remove this as it does not offer any advantage and is ignored by drivers. Signed-off-by:
-
Antoine Tenart authored
In preparation for removing the MACsec h/w offloading preparation phase, make it a no-op in the Atlantic driver. Signed-off-by:
-
Antoine Tenart authored
In preparation for removing the MACsec h/w offloading preparation phase, make it a no-op in the MSCC phy driver. Signed-off-by:
-
Matthieu Baerts authored
It looks like this test has been accidentally dropped when resolving conflicts in this Makefile. Most probably because there were 3 different patches modifying this file in parallel: commit 152e8ec7 ("selftests/bonding: add a test for bonding lladdr target") commit bbb774d9 ("net: Add tests for bonding and team address list management") commit 2ffd5732 ("selftests: bonding: cause oops in bond_rr_gen_slave_id") The first one was applied in 'net-next' while the two other ones were recently applied in the 'net' tree. But that's alright, easy to fix by re-adding the missing one! Fixes: 0140a716 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20220923082306.2468081-1-matthieu.baerts@tessares.netSigned-off-by:
-
Shang XiaoJing authored
devm_ioremap_resource() prints error message in itself. Remove the dev_err call to avoid redundant error message. Signed-off-by:
Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/all/20220923095835.14647-1-shangxiaojing@huawei.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Vasanth Sadhasivan authored
DMA allocated buffers are a precious resource. If there is no need for DMA allocations, then it might be worth to use non-dma allocated buffers. After testing the gs_usb driver with and without DMA allocation, there does not seem to be a significant change in latency or CPU utilization either way. Therefore, DMA allocation is not necessary and removed. Internal buffers used within urbs were managed and freed manually. These buffers are no longer needed to be managed by the driver. The URB_FREE_BUFFER flag, allows for the buffers in question to be automatically freed. Co-developed-by:
Rhett Aultman <rhett.aultman@samsara.com> Signed-off-by:
Vasanth Sadhasivan <vasanth.sadhasivan@samsara.com> Link: https://lore.kernel.org/all/20220920154724.861093-2-rhett.aultman@samsara.comSigned-off-by:
-
Marc Kleine-Budde authored
The candleLight community is working on switchable termination support for the candleLight firmware. As the the Linux CAN framework supports switchable termination add this feature to the gs_usb driver. Devices supporting the feature should set the GS_CAN_FEATURE_TERMINATION and implement the GS_USB_BREQ_SET_TERMINATION and GS_USB_BREQ_GET_TERMINATION control messages. For now the driver assumes for activated termination the standard termination value of 120Ω. Link: https://lore.kernel.org/all/20220923074114.662045-1-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/issues/92 Link: https://github.com/candle-usb/candleLight_fw/pull/109 Link: https://github.com/candle-usb/candleLight_fw/pull/108 Cc: Daniel Trevitz <daniel.trevitz@wika.com> Cc: Ryan Edwards <ryan.edwards@gmail.com> Signed-off-by:
-
Marc Kleine-Budde authored
Introduce a label to free the allocated candev in case of an error and make use of if. Fix a memory leak if the extended bit timing cannot be read. Extend the error messages to print the number of the failing channel and the symbolic error name. Link: https://lore.kernel.org/all/20220921193902.575416-4-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Convert the driver to use usb_control_msg_{send,recv}() instead of usb_control_msg(). These functions allow the data to be placed on the stack. This makes the driver a lot easier as we don't have to deal with dynamically allocated memory. Link: https://lore.kernel.org/all/20220921193902.575416-3-mkl@pengutronix.deSigned-off-by: -
Marc Kleine-Budde authored
Most of the driver uses the variable "dev" to point to the struct gs_can. Use the same name in gs_cmd_reset(), too. Rename gsdev to dev. Fixes: d08e973a ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220921193902.575416-2-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
On busy networks the CAN controller might receive CAN frames directly after starting it but before the timecounter is setup. This will lead to NULL pointer deref while converting the converting the CAN frame's timestamp with the timecounter. Close the race window by setting up the timecounter before starting the CAN controller. Fixes: 45dfa45f ("can: gs_usb: add RX and TX hardware timestamp support") Link: https://lore.kernel.org/all/20220921081329.385509-1-mkl@pengutronix.de Cc: John Whittington <git@jbrengineering.co.uk Tested-by:
John Whittington <git@jbrengineering.co.uk> Signed-off-by:
-
