mvneta does not support asymetric pause modes, and it flags this by the
lack of AsymPause in the supported field. When setting pause modes, we
check that pause->rx_pause == pause->tx_pause, but only when pause
autoneg is enabled. When pause autoneg is disabled, we still allow
pause->rx_pause != pause->tx_pause, which is incorrect when the MAC
does not support asymetric pause, and causes mvneta to issue a warning.

Fix this by removing the test for pause->autoneg, so we always check
that pause->rx_pause == pause->tx_pause for network devices that do not
support AsymPause.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
nfp: fix bugs caused by adaptive coalesce

this series contains fixes for two bugs introduced when
when adaptive coalesce support was added to the NFP driver in
v5.15 by 9d32e4e7 ("nfp: add support for coalesce adaptive feature")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When port is linked down, the process which has acquired rtnl_lock
will wait for the in-progress dim work to finish, and the work also
acquires rtnl_lock, which may cause deadlock.

Currently IRQ_MOD registers can be configured by `ethtool -C` and
dim work, and which will take effect depends on the execution order,
rtnl_lock is useless here, so remove them.

Fixes: 9d32e4e7 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each rx/tx ring has a related dim work, when rx/tx ring number is
decreased by `ethtool -L`, the corresponding rx_ring or tx_ring is
assigned NULL, while its related work is not destroyed. When scheduled,
the work will access NULL pointer.

Fixes: 9d32e4e7 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update .gitignore with newly added tests:
	tools/testing/selftests/net/af_unix/test_unix_oob
	tools/testing/selftests/net/gro
	tools/testing/selftests/net/ioam6_parser
	tools/testing/selftests/net/toeplitz
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.

Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.

Fixes: 47f164de ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: a couple of fixes for PLPMTUD

Four fixes included in this patchset:

  - fix the packet sending in Error state.
  - fix the timer stop when transport update dst.
  - fix the outer header len calculation.
  - fix the return value for toobig processing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp_transport_pl_toobig() supposes to return true only if there's
pathmtu update, so that in sctp_icmp_frag_needed() it would call
sctp_assoc_sync_pmtu() and sctp_retransmit(). This patch is to fix
these return places in sctp_transport_pl_toobig().

Fixes: 83696408 ("sctp: do state transition when receiving an icmp TOOBIG packet")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp_transport_pl_hlen() is called to calculate the outer header length
for PL. However, as the Figure in rfc8899#section-4.4:

   Any additional
     headers         .--- MPS -----.
            |        |             |
            v        v             v
     +------------------------------+
     | IP | ** | PL | protocol data |
     +------------------------------+

                <----- PLPMTU ----->
     <---------- PMTU -------------->

Outer header are IP + Any additional headers, which doesn't include
Packetization Layer itself header, namely sctphdr, whereas sctphdr
is counted by __sctp_mtu_payload().

The incorrect calculation caused the link pathmtu to be set larger
than expected by t->pl.pmtu + sctp_transport_pl_hlen(). This patch
is to fix it by subtracting sctphdr len in sctp_transport_pl_hlen().

Fixes: d9e2e410 ("sctp: add the constants/variables and states and some APIs for transport")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp_transport_pl_update() is called when transport update its dst and
pathmtu, instead of stopping the PLPMTUD probe timer, PLPMTUD should
start over and reset the probe timer. Otherwise, the PLPMTUD service
would stop.

Fixes: 92548ec2 ("sctp: add the probe timer in transport for PLPMTUD")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when PLPMTUD enters Error state, transport pathmtu will be set
to MIN_PLPMTU(512) while probe is continuing with BASE_PLPMTU(1200). It
will cause pathmtu to stay in a very small value, even if the real pmtu
is some value like 1000.

RFC8899 doesn't clearly say how to set the value in Error state. But one
possibility could be keep using BASE_PLPMTU for the real pmtu, but allow
to do IP fragmentation when it's in Error state.

As it says in rfc8899#section-5.4:

   Some paths could be unable to sustain packets of the BASE_PLPMTU
   size.  The Error State could be implemented to provide robustness to
   such paths.  This allows fallback to a smaller than desired PLPMTU
   rather than suffer connectivity failure.  This could utilize methods
   such as endpoint IP fragmentation to enable the PL sender to
   communicate using packets smaller than the BASE_PLPMTU.

This patch is to set pmtu to BASE_PLPMTU instead of MIN_PLPMTU for Error
state in sctp_transport_pl_send/toobig(), and set packet ipfragok for
non-probe packets when it's in Error state.

Fixes: 1dc68c19 ("sctp: do state transition when PROBE_COUNT == MAX_PROBES on HB send path")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from WiFi (mac80211), and BPF.

  Current release - regressions:

   - skb_expand_head: adjust skb->truesize to fix socket memory
     accounting

   - mptcp: fix corrupt receiver key in MPC + data + checksum

  Previous releases - regressions:

   - multicast: calculate csum of looped-back and forwarded packets

   - cgroup: fix memory leak caused by missing cgroup_bpf_offline

   - cfg80211: fix management registrations locking, prevent list
     corruption

   - cfg80211: correct false positive in bridge/4addr mode check

   - tcp_bpf: fix race in the tcp_bpf_send_verdict resulting in reusing
     previous verdict

  Previous releases - always broken:

   - sctp: enhancements for the verification tag, prevent attackers from
     killing SCTP sessions

   - tipc: fix size validations for the MSG_CRYPTO type

   - mac80211: mesh: fix HE operation element length check, prevent out
     of bound access

   - tls: fix sign of socket errors, prevent positive error codes being
     reported from read()/write()

   - cfg80211: scan: extend RCU protection in
     cfg80211_add_nontrans_list()

   - implement ->sock_is_readable() for UDP and AF_UNIX, fix poll() for
     sockets in a BPF sockmap

   - bpf: fix potential race in tail call compatibility check resulting
     in two operations which would make the map incompatible succeeding

   - bpf: prevent increasing bpf_jit_limit above max

   - bpf: fix error usage of map_fd and fdget() in generic batch update

   - phy: ethtool: lock the phy for consistency of results

   - prevent infinite while loop in skb_tx_hash() when Tx races with
     driver reconfiguring the queue <> traffic class mapping

   - usbnet: fixes for bad HW conjured by syzbot

   - xen: stop tx queues during live migration, prevent UAF

   - net-sysfs: initialize uid and gid before calling
     net_ns_get_ownership

   - mlxsw: prevent Rx stalls under memory pressure"

* tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
  Revert "net: hns3: fix pause config problem after autoneg disabled"
  mptcp: fix corrupt receiver key in MPC + data + checksum
  riscv, bpf: Fix potential NULL dereference
  octeontx2-af: Fix possible null pointer dereference.
  octeontx2-af: Display all enabled PF VF rsrc_alloc entries.
  octeontx2-af: Check whether ipolicers exists
  net: ethernet: microchip: lan743x: Fix skb allocation failure
  net/tls: Fix flipped sign in async_wait.err assignment
  net/tls: Fix flipped sign in tls_err_abort() calls
  net/smc: Correct spelling mistake to TCPF_SYN_RECV
  net/smc: Fix smc_link->llc_testlink_time overflow
  nfp: bpf: relax prog rejection for mtu check through max_pkt_offset
  vmxnet3: do not stop tx queues after netif_device_detach()
  r8169: Add device 10ec:8162 to driver r8169
  ptp: Document the PTP_CLK_MAGIC ioctl number
  usbnet: fix error return code in usbnet_probe()
  net: hns3: adjust string spaces of some parameters of tx bd info in debugfs
  net: hns3: expand buffer len for some debugfs command
  net: hns3: add more string spaces for dumping packets number of queue info in debugfs
  net: hns3: fix data endian problem of some functions of debugfs
  ...

Pull spi fixes from Mark Brown:
 "A couple of final driver specific fixes for v5.15, one fixing
  potential ID collisions between two instances of the Altera driver and
  one making Microwire full duplex mode actually work on pl022"

* tag 'spi-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spl022: fix Microwire full duplex mode
  spi: altera: Change to dynamic allocation of spi id

Pull regmap fix from Mark Brown:
 "This fixes a potential double free when handling an out of memory
  error inserting a node into an rbtree regcache"

* tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix possible double-free in regcache_rbtree_exit()

Pull watchdog fixes from Wim Van Sebroeck:
 "I overlooked Guenters request to sent this upstream earlier, so it's a
  bit late in the release cycle.

  This contains:

   - Revert "watchdog: iTCO_wdt: Account for rebooting on second
     timeout"

   - sbsa: only use 32-bit accessors

   - sbsa: drop unneeded MODULE_ALIAS

   - ixp4xx_wdt: Fix address space warning

   - Fix OMAP watchdog early handling"

* tag 'linux-watchdog-5.15-rc7' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Fix OMAP watchdog early handling
  watchdog: ixp4xx_wdt: Fix address space warning
  watchdog: sbsa: drop unneeded MODULE_ALIAS
  watchdog: sbsa: only use 32-bit accessors
  Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"

Pull tracing fix from Steven Rostedt:
 "Do not WARN when attaching event probe to non-existent event

  If the user tries to attach an event probe (eprobe) to an event that
  does not exist, it will trigger a warning. There's an error check that
  only expects memory issues otherwise it is considered a bug. But
  changes in the code to move around the locking made it that it can
  error out if the user attempts to attach to an event that does not
  exist, returning an -ENODEV. As this path can be caused by user space
  putting in a bad value, do not trigger a WARN"

* tag 'trace-v5.15-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Do not warn when connecting eprobe to non existing event

This reverts commit 3bda2e5d.

According to discussion with Andrew as follow:
https://lore.kernel.org/netdev/09eda9fe-196b-006b-6f01-f54e75715961@huawei.com/

HNS3 driver needs to separate pause autoneg from general autoneg, so revert
this incorrect patch.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/20211028140624.53149-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

using packetdrill it's possible to observe that the receiver key contains
random values when clients transmit MP_CAPABLE with data and checksum (as
specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid
using the skb extension copy when writing the MP_CAPABLE sub-option.

Fixes: d7b26908 ("mptcp: shrink mptcp_out_options struct")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233Reported-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The bpf_jit_binary_free() function requires a non-NULL argument. When
the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps,
jit_data->header will be NULL, which triggers a NULL
dereference. Avoid this by checking the argument, prior calling the
function.

Fixes: ca6cb544 ("riscv, bpf: Factor common RISC-V JIT code")
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20211028125115.514587-1-bjorn@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rakesh Babu Saladi says:

====================
RVU Debugfs fix updates.

The following patch series consists of the patch fixes done over
rvu_debugfs.c and rvu_nix.c files.

Patch 1: Check and return if ipolicers do not exists.
Patch 2: Fix rsrc_alloc to print all enabled PF/VF entries with list of LFs
allocated for each functional block.
Patch 3: Fix possible null pointer dereference.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes possible null pointer dereference in files
"rvu_debugfs.c" and "rvu_nix.c"

Fixes: 8756828a ("octeontx2-af: Add NPA aura and pool contexts to debugfs")
Fixes: 9a946def ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries")
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we are using a fixed buffer size of length 2048 to display
rsrc_alloc output. As a result a maximum of 2048 characters of
rsrc_alloc output is displayed, which may lead sometimes to display only
partial output. This patch fixes this dependency on max limit of buffer
size and displays all PF VF entries.

Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12
characters to print the list of LFs of each block for a PF/VF. If the
length of list of LFs of a block exceeds this fixed width then the list
gets truncated and displays only a part of the list. This patch fixes
this by using the maximum possible length of list of LFs among all
blocks of all PFs and VFs entries as the width size.

Fixes: f7884097 ("octeontx2-af: Formatting debugfs entry rsrc_alloc.")
Fixes: 23205e6d ("octeontx2-af: Dump current resource provisioning status")
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While displaying ingress policers information in
debugfs check whether ingress policers exist in
the hardware or not because some platforms(CN9XXX)
do not have this feature.

Fixes: e7d89717 ("octeontx2-af: cn10k: Debugfs support for bandwidth")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances.
GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context.

Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk->sk_err contains a positive number, yet async_wait.err wants the
opposite.  Fix the missed sign flip, which Jakub caught by inspection.

Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk->sk_err appears to expect a positive value, a convention that ktls
doesn't always follow and that leads to memory corruption in other code.
For instance,

    [kworker]
    tls_encrypt_done(..., err=<negative error from crypto request>)
      tls_err_abort(.., err)
        sk->sk_err = err;

    [task]
    splice_from_pipe_feed
      ...
        tls_sw_do_sendpage
          if (sk->sk_err) {
            ret = -sk->sk_err;  // ret is positive

    splice_from_pipe_feed (continued)
      ret = actor(...)  // ret is still positive and interpreted as bytes
                        // written, resulting in underflow of buf->len and
                        // sd->len, leading to huge buf->offset and bogus
                        // addresses computed in later calls to actor()

Fix all tls_err_abort() callers to pass a negative error code
consistently and centralize the error-prone sign flip there, throwing in
a warning to catch future misuse and uninlining the function so it
really does only warn once.

Cc: stable@vger.kernel.org
Fixes: c46234eb ("tls: RX path for ktls")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Lu says:

====================
Fixes for SMC

There are some fixes for SMC.

v1->v2:
- fix wrong email address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There should use TCPF_SYN_RECV instead of TCP_SYN_RECV.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The value of llc_testlink_time is set to the value stored in
net->ipv4.sysctl_tcp_keepalive_time when linkgroup init. The value of
sysctl_tcp_keepalive_time is already jiffies, so we don't need to
multiply by HZ, which would cause smc_link->llc_testlink_time overflow,
and test_link send flood.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MTU change is refused whenever the value of new MTU is bigger than
the max packet bytes that fits in NFP Cluster Target Memory (CTM).
However, an eBPF program doesn't always need to access the whole
packet data.

The maximum direct packet access (DPA) offset has always been
caculated by verifier and stored in the max_pkt_offset field of prog
aux data.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netif_device_detach() conditionally stops all tx queues if the queues
are running. There is no need to call netif_tx_stop_all_queues() again.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the syscall trace points are not configured in, the kselftests for
ftrace will try to attach an event probe (eprobe) to one of the system
call trace points. This triggered a WARNING, because the failure only
expects to see memory issues. But this is not the only failure. The user
may attempt to attach to a non existent event, and the kernel must not
warn about it.

Link: https://lkml.kernel.org/r/20211027120854.0680aa0f@gandalf.local.home

Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This patch makes the driver r8169 pick up device Realtek Semiconductor Co.
, Ltd. Device [10ec:8162].
Signed-off-by: Janghyub Seo <jhyub06@gmail.com>
Suggested-by: Rushab Shah <rushabshah32@gmail.com>
Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add PTP_CLK_MAGIC to the userspace-api/ioctl/ioctl-number.rst
documentation file.

Fixes: d94ba80e ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20211024163831.10200-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull virtio fixes from Michael Tsirkin:
 "A couple of fixes that seem important enough to pick at the last
  moment"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-ring: fix DMA metadata flags
  vduse: Fix race condition between resetting and irq injecting
  vduse: Disallow injecting interrupt before DRIVER_OK is set

The flags are currently overwritten, leading to the wrong direction
being passed to the DMA unmap functions.

Fixes: 72b5e895 ("virtio-ring: store DMA metadata in desc_extra for split virtqueue")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20211026133100.17541-1-vincent.whitchurch@axis.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Return error code if usb_maxpacket() returns 0 in usbnet_probe()

Fixes: 397430b5 ("usbnet: sanity check for maxpacket")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull nds32 tracing fix from Steven Rostedt:
 "Fix nds32le build when DYNAMIC_FTRACE is disabled

  A randconfig found that nds32le architecture fails to build due to a
  prototype mismatch between a ftrace function pointer and the function
  it was to be assigned to. That function pointer prototype missed being
  updated when all the ftrace callbacks were updated"

* tag 'trace-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/nds32: Update the proto for ftrace_trace_function to match ftrace_stub

Merge tag 'nios2_fixes_for_v5.15_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

Pull nios2 fix from Dinh Nguyen:
 "Fix a build error for allmodconfig"

* tag 'nios2_fixes_for_v5.15_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST

Pull rdma fixes from Jason Gunthorpe:
 "Nothing very exciting here, it has been a quiet cycle overall. Usual
  collection of small bug fixes:

   - irdma issues with CQ entries, VLAN completions and a mutex deadlock

   - Incorrect DCT packets in mlx5

   - Userspace triggered overflows in qib

   - Locking error in hfi

   - Typo in errno value in qib/hfi1

   - Double free in qedr

   - Leak of random kernel memory to userspace with a netlink callback"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/sa_query: Use strscpy_pad instead of memcpy to copy a string
  RDMA/irdma: Do not hold qos mutex twice on QP resume
  RDMA/irdma: Set VLAN in UD work completion correctly
  RDMA/mlx5: Initialize the ODP xarray when creating an ODP MR
  rdma/qedr: Fix crash due to redundant release of device's qp memory
  RDMA/rdmavt: Fix error code in rvt_create_qp()
  IB/hfi1: Fix abba locking issue with sc_disable()
  IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields
  RDMA/mlx5: Set user priority for DCT
  RDMA/irdma: Process extended CQ entries correctly