- 26 Apr, 2022 20 commits
-
-
Guo Zhengkui authored
Fix the following coccicheck warning: drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gt215.c:71:5-12: Unneeded variable: "disable". Return "0ULL" on line 85. Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Tom Rix authored
Sparse reports these issues wndwgv100.c:120:1: warning: symbol 'gv100_disp_wndw_mthd' was not declared. Should it be static? wndwgv100.c:140:1: warning: symbol 'gv100_disp_wndw' was not declared. Should it be static? These variable are only used in wndwgv100.c. Single file variables should be static. So use static as their storage-class specifiers. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
-
Tom Rix authored
Sparse reports this issue wimmgv100.c:39:1: warning: symbol 'gv100_disp_wimm' was not declared. Should it be static? This variable is only used in wimmgv100.c. Single file variables should be static. So use static as its storage-class specifier. Signed-off-by:
-
Tom Rix authored
Sparse reports these issues coregv100.c:27:1: warning: symbol 'gv100_disp_core_mthd_base' was not declared. Should it be static? coregv100.c:43:1: warning: symbol 'gv100_disp_core_mthd_sor' was not declared. Should it be static? These variables are only used in coregv100.c. Single file use variables should be static, so add static to their storage-class specifier. Signed-off-by:
-
Colin Ian King authored
In the unlikely event that pointer perfmon is null the WARN_ON return path occurs after the pointer has already been deferenced. Fix this by only dereferencing perfmon after it has been null checked. Fixes: 26a4dc29 ("drm/v3d: Expose performance counters to userspace") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Juan A. Suarez <jasuarez@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220424183512.1365683-1-colin.i.king@gmail.com
-
Samuel Holland authored
Now that the various blocks in the D1 display engine pipeline are supported, we can enable the overall engine. Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-15-samuel@sholland.org
-
Samuel Holland authored
D1 has a TCON TOP, so its quirks are similar to those for the R40 TCONs. While there are some register changes, the part of the TCON TV supported by the driver matches the R40 quirks, so that quirks structure can be reused. D1 has the first supported TCON LCD with a TCON TOP, so the TCON LCD needs a new quirks structure. D1's TCON LCD hardware supports LVDS; in fact it provides dual-link LVDS from a single TCON. However, it comes with a brand new LVDS PHY. Since this PHY has not been tested, leave out LVDS driver support for now. Signed-off-by:
-
Samuel Holland authored
D1 has a TCON TOP with TCON TV0 and DSI, but no TCON TV1. This puts the DSI clock name at index 1 in clock-output-names. Support this by only incrementing the index for clocks that are actually supported. Signed-off-by:
-
Samuel Holland authored
D1 has a display engine with the usual pair of mixers, albeit with relatively few layers. In fact, D1 appears to be the first SoC to have a mixer without any UI layers. Add support for these new variants. Acked-by:
-
Samuel Holland authored
D1 changes the MMIO offsets for the CSC blocks in the first mixer. The mixers' ccsc property is used as an index into the ccsc_base array. Use an enumeration to describe this index, and add the new set of offsets. Signed-off-by:
-
Samuel Holland authored
D1's mixer 1 has no UI layers, only a single VI layer. That means the mixer can only be used if the primary plane comes from this VI layer. Add the code to handle this case. Signed-off-by:
-
Jernej Skrabec authored
Newly introduced mode_set callback in engine structure is a much better place for setting mixer output size and interlace mode for the following reasons: 1. Aforementioned properties change only when mode changes, so it's enough to be set only once per mode set. Currently it's done whenever properties of primary plane are changed. 2. It's assumed that primary plane will always cover whole screen. While this is true most of the time, it's not always. DE2/3 planes are universal and mostly equal in functionality. There is no reason to add artificial limitation to primary planes. 3. The current code only works for UI layers, but some mixers do not have any UI layers. Signed-off-by:
-
Jernej Skrabec authored
Newly introduced mode_set callback in engine structure is a much better place for setting backend output size and interlace mode for following reasons: 1. Aforementioned properties change only when mode changes, so it's enough to be set only once per mode set. Currently it's done whenever properties of primary plane are changed. 2. It's assumed that primary plane will always cover whole screen. While this is true most of the time, it's not always. Planes are universal. There is no reason to add artificial limitation to primary plane. Signed-off-by:
-
Jernej Skrabec authored
This optional callback is useful for setting properties which depends only on current mode. Such properties are width, height and interlaced output. These properties are currently set in update layer callback for primary plane which is less than ideal. More about that in follow up patches, which will migrate that code to this newly defined callback. Signed-off-by:
-
Samuel Holland authored
Allwinner D1 is a RISC-V SoC which contains a DE 2.0 engine. Let's remove the dependency on a specific CPU architecture, so the driver can be built wherever ARCH_SUNXI is selected. Acked-by:
-
Samuel Holland authored
readsb/writesb are unavailable on some architectures. In preparation for removing the Kconfig architecture dependency, switch to the equivalent but more portable ioread/write8_rep helpers. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Samuel Holland authored
Allwinner D1 contains a display engine 2.0. It features two mixers, a TCON TOP (with DSI and HDMI), one TCON LCD, and one TCON TV. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Samuel Holland authored
So far, the binding and driver have relied on the fact that the H6 clocks are both a prefix and a subset of the R40 clocks. This allows them to share the clocks/clock-names items and the clock-output-names order between the hardware variants. However, the D1 hardware has TCON TV0 and DSI, but no TCON TV1. This cannot be supported by the existing scheme because it puts a gap in the middle of the item lists. To prepare for adding D1 support, use separate lists for variants with different combinations of clocks. Reviewed-by:
-
Dmitry Baryshkov authored
The tc358762.connector field is unused. Remove it to save space. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
This function returns zero unconditionally, so there isn't any benefit of returning a value. Make it return void to be able to see at a glance that the return value of ssd130x_i2c_remove() is always zero. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
- 25 Apr, 2022 14 commits
-
-
Marek Vasut authored
In case the MXSFB is connected to a bridge, attempt to obtain bus flags from that bridge state too. The bus flags may specify e.g. the DE signal polarity. Acked-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220417021011.337066-1-marex@denx.de
-
Marek Vasut authored
Reorder mxsfb_crtc_mode_set_nofb() such that all functions which perform register IO are called from one single location in this function. This is a clean up. No functional change. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-4-marex@denx.de
-
Marek Vasut authored
Pull mode registers programming from mxsfb_enable_controller() into dedicated function mxsfb_set_mode(). This is a clean up. No functional change. Signed-off-by:
-
Marek Vasut authored
Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr() to correctly handle FB offset. Signed-off-by:
-
Marek Vasut authored
Wrap FIFO reset and comments into mxsfb_reset_block(), this is a clean up. No functional change. Reviewed-by:
-
Thomas Zimmermann authored
SCDC is the Status and Control Data Channel for HDMI. Move the SCDC helpers into display/ and split the header into files for core and helpers. Update all affected drivers. No functional changes. To avoid the proliferation of Kconfig options, SCDC is part of DRM's support for HDMI. If necessary, a new option could make SCDC an independent feature. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
Move DRM's HMDI helpers into the display/ subdirectoy and add it to DRM's display helpers. Update all affected drivers. No functional changes. The HDMI helpers were implemented in the EDID and connector code, but are actually unrelated. With the move to the display-helper library, we can remove the dependency on drm_edid.{c,h} in some driver's HDMI source files. Several of the HDMI helpers remain in EDID code because both share parts of their implementation internally. With better refractoring of the EDID code, those HDMI helpers could be moved into the display-helper library as well. v3: * fix Kconfig dependencies (Javier) v2: * reduce HDMI helpers to avoid exporting functions (Jani) * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: -
Thomas Zimmermann authored
Move DRM's HDCP helper library into the display/ subdirectory and add it to DRM's display helpers. Split the header file into core and helpers. Update all affected drivers. No functional changes. v3: * fix Kconfig dependencies v2: * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by:
-
Thomas Zimmermann authored
DSC is the Display Stream Compression standard for DisplayPort. Move the DSC code into display/ and split the header into files for protocol core and DRM helpers. Adapt all users of the code. No functional changes. To avoid the proliferation of Kconfig options, DSC is part of DRM's support for DisplayPort. If necessary, a new option could make DSC an independent feature. Signed-off-by:
-
Thomas Zimmermann authored
Move DisplayPort protocol constants and structures into the new header drm_dp.h, which can be used by DRM core components. The existing header drm_dp_helper.h now only contains helper code for graphics drivers. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace the DP-helper module with a display-helper module. The support for DisplayPort becomes an internal option that drivers have to select. Update all related Kconfig and Makefile rules. Besides the existing code for DisplayPort, the new module will contain helpers for other video-output standards, such as HDMI. Drivers will have to select their required video-output helpers. Linking all display-related code into a single module avoids the proliferation of small kernel modules. The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz, and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace to drm_display_helper. v2: * mention module parameters in commit message (Javier) * distiguish between display module and DP support in Kconfig * update Makefile rules for DP helpers * move Kconfig rules into separate file under display/ Signed-off-by:
-
Thomas Zimmermann authored
Rename dp/ to display/ to account for additional display-related helpers, such as HDMI. Update all related include statements. No functional changes. Various drivers, such as i915 and amdgpu, use similar naming scheme by putting code for video-output standards into a local display/ directory. The new directory's name is aligned with this convention. v2: * update commit message (Javier) Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Give the Makefile a bit more structure by putting rules for core, helpers, drivers, etc next to each other. Signed-off-by:
-
Chunguang Xu authored
Fix typos in comment. Signed-off-by:
Chunguang Xu <brookxu@tencent.com> Signed-off-by:
Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/1650625751-32137-1-git-send-email-brookxu.cn@gmail.com
-
- 24 Apr, 2022 5 commits
-
-
Marek Vasut authored
The DE signal is active high on this display, fill in the missing bus_flags. This aligns panel_desc with its display_timing . Fixes: a5d2ade6 ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by:
-
Marek Vasut authored
The check for mandatory DT properties width-mm and height-mm is now part of of_get_drm_panel_display_mode(), drop the redundant check from this driver. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220411004728.68203-2-marex@denx.de
-
Marek Vasut authored
All users of this function require width-mm/height-mm DT property to be present per their DT bindings, make width-mm/height-mm check mandatory. It is generally a good idea to specify panel dimensions, so userspace can configure e.g. scaling accordingly. Signed-off-by:
-
Marek Vasut authored
Add DataImage FG040346DSSWBG04 4.3" 480x272 TFT LCD 24bit DPI panel support. Acked-by:
-
Marek Vasut authored
Add DataImage FG040346DSSWBG04 4.3" 480x272 TFT LCD 24bit DPI panel compatible string. Acked-by:
-
- 23 Apr, 2022 1 commit
-
-
Zack Rusin authored
The buffer objects created by cotables were missing fence reservations. They are created from vmw_validation_res_validate which makes them miss the ttm_eu_reserve_buffers which is called from vmw_validation_bo_reserve. Cotables are the only resources which create a buffer object in the create callback so make sure the code also reserves the slots. Signed-off-by:
Zack Rusin <zackr@vmware.com> Co-developed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
