/* * linux/drivers/ide/ide_cd.h * * Copyright (C) 1996-98 Erik Andersen * Copyright (C) 1998-2000 Jens Axboe */ #ifndef _IDE_CD_H #define _IDE_CD_H #include <linux/cdrom.h> #include <asm/byteorder.h> /* Turn this on to have the driver print out the meanings of the ATAPI error codes. This will use up additional kernel-space memory, though. */ #ifndef VERBOSE_IDE_CD_ERRORS # define VERBOSE_IDE_CD_ERRORS 1 #endif /* Turning this on will remove code to work around various nonstandard ATAPI implementations. If you know your drive follows the standard, this will give you a slightly smaller kernel. */ #ifndef STANDARD_ATAPI # define STANDARD_ATAPI 0 #endif /* Turning this on will disable the door-locking functionality. This is apparently needed for supermount. */ #ifndef NO_DOOR_LOCKING # define NO_DOOR_LOCKING 0 #endif /************************************************************************/ #define SECTOR_BITS 9 #ifndef SECTOR_SIZE # define SECTOR_SIZE (1 << SECTOR_BITS) #endif #define SECTORS_PER_FRAME (CD_FRAMESIZE >> SECTOR_BITS) #define SECTOR_BUFFER_SIZE (CD_FRAMESIZE * 32) #define SECTORS_BUFFER (SECTOR_BUFFER_SIZE >> SECTOR_BITS) #define SECTORS_MAX (131072 >> SECTOR_BITS) #define BLOCKS_PER_FRAME (CD_FRAMESIZE / BLOCK_SIZE) #define MIN(a,b) ((a) < (b) ? (a) : (b)) /* Configuration flags. These describe the capabilities of the drive. They generally do not change after initialization, unless we learn more about the drive from stuff failing. */ struct ide_cd_config_flags { __u8 drq_interrupt : 1; /* Device sends an interrupt when ready for a packet command. */ __u8 no_doorlock : 1; /* Drive cannot lock the door. */ __u8 no_eject : 1; /* Drive cannot eject the disc. */ __u8 nec260 : 1; /* Drive is a pre-1.2 NEC 260 drive. */ __u8 playmsf_as_bcd : 1; /* PLAYMSF command takes BCD args. */ __u8 tocaddr_as_bcd : 1; /* TOC addresses are in BCD. */ __u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */ __u8 subchan_as_bcd : 1; /* Subchannel info is in BCD. */ __u8 is_changer : 1; /* Drive is a changer. */ __u8 cd_r : 1; /* Drive can write to CD-R media . */ __u8 cd_rw : 1; /* Drive can write to CD-R/W media . */ __u8 dvd : 1; /* Drive is a DVD-ROM */ __u8 dvd_r : 1; /* Drive can write DVD-R */ __u8 dvd_ram : 1; /* Drive can write DVD-RAM */ __u8 test_write : 1; /* Drive can fake writes */ __u8 supp_disc_present : 1; /* Changer can report exact contents of slots. */ __u8 limit_nframes : 1; /* Drive does not provide data in multiples of SECTOR_SIZE when more than one interrupt is needed. */ __u8 seeking : 1; /* Seeking in progress */ __u8 audio_play : 1; /* can do audio related commands */ __u8 close_tray : 1; /* can close the tray */ __u8 writing : 1; /* pseudo write in progress */ __u8 reserved : 3; byte max_speed; /* Max speed of the drive */ }; #define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags)) /* State flags. These give information about the current state of the drive, and will change during normal operation. */ struct ide_cd_state_flags { __u8 media_changed : 1; /* Driver has noticed a media change. */ __u8 toc_valid : 1; /* Saved TOC information is current. */ __u8 door_locked : 1; /* We think that the drive door is locked. */ __u8 writing : 1; /* the drive is currently writing */ __u8 reserved : 4; byte current_speed; /* Current speed of the drive */ }; #define CDROM_STATE_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->state_flags)) struct packet_command { char *buffer; int buflen; int stat; int quiet; int timeout; struct request_sense *sense; /* This is currently used to pass failed commands through the request * queue. Is this for asynchronos error reporting? * * Can we always be sure that this didn't valish from stack beneath us * - we can't! */ struct packet_command *failed_command; }; /* Structure of a MSF cdrom address. */ struct atapi_msf { u8 __reserved; u8 minute; u8 second; u8 frame; } __attribute__((packed)); /* Space to hold the disk TOC. */ #define MAX_TRACKS 99 struct atapi_toc_header { u16 toc_length; u8 first_track; u8 last_track; } __attribute__((packed)); struct atapi_toc_entry { byte reserved1; #if defined(__BIG_ENDIAN_BITFIELD) __u8 adr : 4; __u8 control : 4; #elif defined(__LITTLE_ENDIAN_BITFIELD) __u8 control : 4; __u8 adr : 4; #else #error "Please fix <asm/byteorder.h>" #endif byte track; byte reserved2; union { unsigned lba; struct atapi_msf msf; } addr; }; struct atapi_toc { int last_session_lba; int xa_flag; unsigned long capacity; struct atapi_toc_header hdr; struct atapi_toc_entry ent[MAX_TRACKS+1]; /* One extra for the leadout. */ }; /* This structure is annoyingly close to, but not identical with, the cdrom_subchnl structure from cdrom.h. */ struct atapi_cdrom_subchnl { u8 acdsc_reserved; u8 acdsc_audiostatus; u16 acdsc_length; u8 acdsc_format; #if defined(__BIG_ENDIAN_BITFIELD) u8 acdsc_ctrl: 4; u8 acdsc_adr: 4; #elif defined(__LITTLE_ENDIAN_BITFIELD) u8 acdsc_adr: 4; u8 acdsc_ctrl: 4; #else #error "Please fix <asm/byteorder.h>" #endif u_char acdsc_trk; u_char acdsc_ind; union { struct atapi_msf msf; int lba; } acdsc_absaddr; union { struct atapi_msf msf; int lba; } acdsc_reladdr; }; /* This should probably go into cdrom.h along with the other * generic stuff now in the Mt. Fuji spec. */ struct atapi_capabilities_page { struct mode_page_header header; #if defined(__BIG_ENDIAN_BITFIELD) __u8 parameters_saveable : 1; __u8 reserved1 : 1; __u8 page_code : 6; #elif defined(__LITTLE_ENDIAN_BITFIELD) __u8 page_code : 6; __u8 reserved1 : 1; __u8 parameters_saveable : 1; #else #error "Please fix <asm/byteorder.h>" #endif byte page_length; #if defined(__BIG_ENDIAN_BITFIELD) __u8 reserved2 : 2; /* Drive supports reading of DVD-RAM discs */ __u8 dvd_ram_read : 1; /* Drive supports reading of DVD-R discs */ __u8 dvd_r_read : 1; /* Drive supports reading of DVD-ROM discs */ __u8 dvd_rom : 1; /* Drive supports reading CD-R discs with addressing method 2 */ __u8 method2 : 1; /* reserved in 1.2 */ /* Drive can read from CD-R/W (CD-E) discs (orange book, part III) */ __u8 cd_rw_read : 1; /* reserved in 1.2 */ /* Drive supports read from CD-R discs (orange book, part II) */ __u8 cd_r_read : 1; /* reserved in 1.2 */ #elif defined(__LITTLE_ENDIAN_BITFIELD) /* Drive supports read from CD-R discs (orange book, part II) */ __u8 cd_r_read : 1; /* reserved in 1.2 */ /* Drive can read from CD-R/W (CD-E) discs (orange book, part III) */ __u8 cd_rw_read : 1; /* reserved in 1.2 */ /* Drive supports reading CD-R discs with addressing method 2 */ __u8 method2 : 1; /* Drive supports reading of DVD-ROM discs */ __u8 dvd_rom : 1; /* Drive supports reading of DVD-R discs */ __u8 dvd_r_read : 1; /* Drive supports reading of DVD-RAM discs */ __u8 dvd_ram_read : 1; __u8 reserved2 : 2; #else #error "Please fix <asm/byteorder.h>" #endif #if defined(__BIG_ENDIAN_BITFIELD) __u8 reserved3 : 2; /* Drive can write DVD-RAM discs */ __u8 dvd_ram_write : 1; /* Drive can write DVD-R discs */ __u8 dvd_r_write : 1; __u8 reserved3a : 1; /* Drive can fake writes */ __u8 test_write : 1; /* Drive can write to CD-R/W (CD-E) discs (orange book, part III) */ __u8 cd_rw_write : 1; /* reserved in 1.2 */ /* Drive supports write to CD-R discs (orange book, part II) */ __u8 cd_r_write : 1; /* reserved in 1.2 */ #elif defined(__LITTLE_ENDIAN_BITFIELD) /* Drive can write to CD-R discs (orange book, part II) */ __u8 cd_r_write : 1; /* reserved in 1.2 */ /* Drive can write to CD-R/W (CD-E) discs (orange book, part III) */ __u8 cd_rw_write : 1; /* reserved in 1.2 */ /* Drive can fake writes */ __u8 test_write : 1; __u8 reserved3a : 1; /* Drive can write DVD-R discs */ __u8 dvd_r_write : 1; /* Drive can write DVD-RAM discs */ __u8 dvd_ram_write : 1; __u8 reserved3 : 2; #else #error "Please fix <asm/byteorder.h>" #endif #if defined(__BIG_ENDIAN_BITFIELD) __u8 reserved4 : 1; /* Drive can read multisession discs. */ __u8 multisession : 1; /* Drive can read mode 2, form 2 data. */ __u8 mode2_form2 : 1; /* Drive can read mode 2, form 1 (XA) data. */ __u8 mode2_form1 : 1; /* Drive supports digital output on port 2. */ __u8 digport2 : 1; /* Drive supports digital output on port 1. */ __u8 digport1 : 1; /* Drive can deliver a composite audio/video data stream. */ __u8 composite : 1; /* Drive supports audio play operations. */ __u8 audio_play : 1; #elif defined(__LITTLE_ENDIAN_BITFIELD) /* Drive supports audio play operations. */ __u8 audio_play : 1; /* Drive can deliver a composite audio/video data stream. */ __u8 composite : 1; /* Drive supports digital output on port 1. */ __u8 digport1 : 1; /* Drive supports digital output on port 2. */ __u8 digport2 : 1; /* Drive can read mode 2, form 1 (XA) data. */ __u8 mode2_form1 : 1; /* Drive can read mode 2, form 2 data. */ __u8 mode2_form2 : 1; /* Drive can read multisession discs. */ __u8 multisession : 1; __u8 reserved4 : 1; #else #error "Please fix <asm/byteorder.h>" #endif #if defined(__BIG_ENDIAN_BITFIELD) __u8 reserved5 : 1; /* Drive can return Media Catalog Number (UPC) info. */ __u8 upc : 1; /* Drive can return International Standard Recording Code info. */ __u8 isrc : 1; /* Drive supports C2 error pointers. */ __u8 c2_pointers : 1; /* R-W data will be returned deinterleaved and error corrected. */ __u8 rw_corr : 1; /* Subchannel reads can return combined R-W information. */ __u8 rw_supported : 1; /* Drive can continue a read cdda operation from a loss of streaming.*/ __u8 cdda_accurate : 1; /* Drive can read Red Book audio data. */ __u8 cdda : 1; #elif defined(__LITTLE_ENDIAN_BITFIELD) /* Drive can read Red Book audio data. */ __u8 cdda : 1; /* Drive can continue a read cdda operation from a loss of streaming.*/ __u8 cdda_accurate : 1; /* Subchannel reads can return combined R-W information. */ __u8 rw_supported : 1; /* R-W data will be returned deinterleaved and error corrected. */ __u8 rw_corr : 1; /* Drive supports C2 error pointers. */ __u8 c2_pointers : 1; /* Drive can return International Standard Recording Code info. */ __u8 isrc : 1; /* Drive can return Media Catalog Number (UPC) info. */ __u8 upc : 1; __u8 reserved5 : 1; #else #error "Please fix <asm/byteorder.h>" #endif #if defined(__BIG_ENDIAN_BITFIELD) /* Drive mechanism types. */ mechtype_t mechtype : 3; __u8 reserved6 : 1; /* Drive can eject a disc or changer cartridge. */ __u8 eject : 1; /* State of prevent/allow jumper. */ __u8 prevent_jumper : 1; /* Present state of door lock. */ __u8 lock_state : 1; /* Drive can lock the door. */ __u8 lock : 1; #elif defined(__LITTLE_ENDIAN_BITFIELD) /* Drive can lock the door. */ __u8 lock : 1; /* Present state of door lock. */ __u8 lock_state : 1; /* State of prevent/allow jumper. */ __u8 prevent_jumper : 1; /* Drive can eject a disc or changer cartridge. */ __u8 eject : 1; __u8 reserved6 : 1; /* Drive mechanism types. */ mechtype_t mechtype : 3; #else #error "Please fix <asm/byteorder.h>" #endif #if defined(__BIG_ENDIAN_BITFIELD) __u8 reserved7 : 4; /* Drive supports software slot selection. */ __u8 sss : 1; /* reserved in 1.2 */ /* Changer can report exact contents of slots. */ __u8 disc_present : 1; /* reserved in 1.2 */ /* Audio for each channel can be muted independently. */ __u8 separate_mute : 1; /* Audio level for each channel can be controlled independently. */ __u8 separate_volume : 1; #elif defined(__LITTLE_ENDIAN_BITFIELD) /* Audio level for each channel can be controlled independently. */ __u8 separate_volume : 1; /* Audio for each channel can be muted independently. */ __u8 separate_mute : 1; /* Changer can report exact contents of slots. */ __u8 disc_present : 1; /* reserved in 1.2 */ /* Drive supports software slot selection. */ __u8 sss : 1; /* reserved in 1.2 */ __u8 reserved7 : 4; #else #error "Please fix <asm/byteorder.h>" #endif /* Note: the following four fields are returned in big-endian form. */ /* Maximum speed (in kB/s). */ unsigned short maxspeed; /* Number of discrete volume levels. */ unsigned short n_vol_levels; /* Size of cache in drive, in kB. */ unsigned short buffer_size; /* Current speed (in kB/s). */ unsigned short curspeed; char pad[4]; }; struct atapi_mechstat_header { #if defined(__BIG_ENDIAN_BITFIELD) __u8 fault : 1; __u8 changer_state : 2; __u8 curslot : 5; #elif defined(__LITTLE_ENDIAN_BITFIELD) __u8 curslot : 5; __u8 changer_state : 2; __u8 fault : 1; #else #error "Please fix <asm/byteorder.h>" #endif #if defined(__BIG_ENDIAN_BITFIELD) __u8 mech_state : 3; __u8 door_open : 1; __u8 reserved1 : 4; #elif defined(__LITTLE_ENDIAN_BITFIELD) __u8 reserved1 : 4; __u8 door_open : 1; __u8 mech_state : 3; #else #error "Please fix <asm/byteorder.h>" #endif byte curlba[3]; byte nslots; __u16 slot_tablelen; }; struct atapi_slot { #if defined(__BIG_ENDIAN_BITFIELD) __u8 disc_present : 1; __u8 reserved1 : 6; __u8 change : 1; #elif defined(__LITTLE_ENDIAN_BITFIELD) __u8 change : 1; __u8 reserved1 : 6; __u8 disc_present : 1; #else #error "Please fix <asm/byteorder.h>" #endif byte reserved2[3]; }; struct atapi_changer_info { struct atapi_mechstat_header hdr; struct atapi_slot slots[0]; }; /* Extra per-device info for cdrom drives. */ struct cdrom_info { /* Buffer for table of contents. NULL if we haven't allocated a TOC buffer for this device yet. */ struct atapi_toc *toc; unsigned long sector_buffered; unsigned long nsectors_buffered; unsigned char *buffer; /* The result of the last successful request sense command on this device. */ struct request_sense sense_data; struct request request_sense_request; struct packet_command request_sense_pc; int dma; int cmd; unsigned long last_block; unsigned long start_seek; /* Buffer to hold mechanism status and changer slot table. */ struct atapi_changer_info *changer_info; struct ide_cd_config_flags config_flags; struct ide_cd_state_flags state_flags; /* Per-device info needed by cdrom.c generic driver. */ struct cdrom_device_info devinfo; }; /**************************************************************************** * Descriptions of ATAPI error codes. */ #define ARY_LEN(a) ((sizeof(a) / sizeof(a[0]))) /* This stuff should be in cdrom.h, since it is now generic... */ /* ATAPI sense keys (from table 140 of ATAPI 2.6) */ #define NO_SENSE 0x00 #define RECOVERED_ERROR 0x01 #define NOT_READY 0x02 #define MEDIUM_ERROR 0x03 #define HARDWARE_ERROR 0x04 #define ILLEGAL_REQUEST 0x05 #define UNIT_ATTENTION 0x06 #define DATA_PROTECT 0x07 #define ABORTED_COMMAND 0x0b #define MISCOMPARE 0x0e /* This stuff should be in cdrom.h, since it is now generic... */ #if VERBOSE_IDE_CD_ERRORS /* The generic packet command opcodes for CD/DVD Logical Units, * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ const struct { unsigned short packet_command; const char * const text; } packet_command_texts[] = { { GPCMD_TEST_UNIT_READY, "Test Unit Ready" }, { GPCMD_REQUEST_SENSE, "Request Sense" }, { GPCMD_FORMAT_UNIT, "Format Unit" }, { GPCMD_INQUIRY, "Inquiry" }, { GPCMD_START_STOP_UNIT, "Start/Stop Unit" }, { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" }, { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" }, { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" }, { GPCMD_READ_10, "Read 10" }, { GPCMD_WRITE_10, "Write 10" }, { GPCMD_SEEK, "Seek" }, { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" }, { GPCMD_VERIFY_10, "Verify 10" }, { GPCMD_FLUSH_CACHE, "Flush Cache" }, { GPCMD_READ_SUBCHANNEL, "Read Subchannel" }, { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" }, { GPCMD_READ_HEADER, "Read Header" }, { GPCMD_PLAY_AUDIO_10, "Play Audio 10" }, { GPCMD_GET_CONFIGURATION, "Get Configuration" }, { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" }, { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" }, { GPCMD_GET_EVENT_STATUS_NOTIFICATION, "Get Event Status Notification" }, { GPCMD_PAUSE_RESUME, "Pause/Resume" }, { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" }, { GPCMD_READ_DISC_INFO, "Read Disc Info" }, { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" }, { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" }, { GPCMD_SEND_OPC, "Send OPC" }, { GPCMD_MODE_SELECT_10, "Mode Select 10" }, { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" }, { GPCMD_MODE_SENSE_10, "Mode Sense 10" }, { GPCMD_CLOSE_TRACK, "Close Track" }, { GPCMD_BLANK, "Blank" }, { GPCMD_SEND_EVENT, "Send Event" }, { GPCMD_SEND_KEY, "Send Key" }, { GPCMD_REPORT_KEY, "Report Key" }, { GPCMD_LOAD_UNLOAD, "Load/Unload" }, { GPCMD_SET_READ_AHEAD, "Set Read-ahead" }, { GPCMD_READ_12, "Read 12" }, { GPCMD_GET_PERFORMANCE, "Get Performance" }, { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" }, { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" }, { GPCMD_SET_STREAMING, "Set Streaming" }, { GPCMD_READ_CD_MSF, "Read CD MSF" }, { GPCMD_SCAN, "Scan" }, { GPCMD_SET_SPEED, "Set Speed" }, { GPCMD_PLAY_CD, "Play CD" }, { GPCMD_MECHANISM_STATUS, "Mechanism Status" }, { GPCMD_READ_CD, "Read CD" }, }; /* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ const char * const sense_key_texts[16] = { "No sense data", "Recovered error", "Not ready", "Medium error", "Hardware error", "Illegal request", "Unit attention", "Data protect", "(reserved)", "(reserved)", "(reserved)", "Aborted command", "(reserved)", "(reserved)", "Miscompare", "(reserved)", }; /* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ const struct { unsigned long asc_ascq; const char * const text; } sense_data_texts[] = { { 0x000000, "No additional sense information" }, { 0x000011, "Play operation in progress" }, { 0x000012, "Play operation paused" }, { 0x000013, "Play operation successfully completed" }, { 0x000014, "Play operation stopped due to error" }, { 0x000015, "No current audio status to return" }, { 0x010c0a, "Write error - padding blocks added" }, { 0x011700, "Recovered data with no error correction applied" }, { 0x011701, "Recovered data with retries" }, { 0x011702, "Recovered data with positive head offset" }, { 0x011703, "Recovered data with negative head offset" }, { 0x011704, "Recovered data with retries and/or CIRC applied" }, { 0x011705, "Recovered data using previous sector ID" }, { 0x011800, "Recovered data with error correction applied" }, { 0x011801, "Recovered data with error correction and retries applied"}, { 0x011802, "Recovered data - the data was auto-reallocated" }, { 0x011803, "Recovered data with CIRC" }, { 0x011804, "Recovered data with L-EC" }, { 0x015d00, "Failure prediction threshold exceeded - Predicted logical unit failure" }, { 0x015d01, "Failure prediction threshold exceeded - Predicted media failure" }, { 0x015dff, "Failure prediction threshold exceeded - False" }, { 0x017301, "Power calibration area almost full" }, { 0x020400, "Logical unit not ready - cause not reportable" }, /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */ { 0x020401, "Logical unit not ready - in progress [sic] of becoming ready" }, { 0x020402, "Logical unit not ready - initializing command required" }, { 0x020403, "Logical unit not ready - manual intervention required" }, { 0x020404, "Logical unit not ready - format in progress" }, { 0x020407, "Logical unit not ready - operation in progress" }, { 0x020408, "Logical unit not ready - long write in progress" }, { 0x020600, "No reference position found (media may be upside down)" }, { 0x023000, "Incompatible medium installed" }, { 0x023a00, "Medium not present" }, { 0x025300, "Media load or eject failed" }, { 0x025700, "Unable to recover table of contents" }, { 0x030300, "Peripheral device write fault" }, { 0x030301, "No write current" }, { 0x030302, "Excessive write errors" }, { 0x030c00, "Write error" }, { 0x030c01, "Write error - Recovered with auto reallocation" }, { 0x030c02, "Write error - auto reallocation failed" }, { 0x030c03, "Write error - recommend reassignment" }, { 0x030c04, "Compression check miscompare error" }, { 0x030c05, "Data expansion occurred during compress" }, { 0x030c06, "Block not compressible" }, { 0x030c07, "Write error - recovery needed" }, { 0x030c08, "Write error - recovery failed" }, { 0x030c09, "Write error - loss of streaming" }, { 0x031100, "Unrecovered read error" }, { 0x031106, "CIRC unrecovered error" }, { 0x033101, "Format command failed" }, { 0x033200, "No defect spare location available" }, { 0x033201, "Defect list update failure" }, { 0x035100, "Erase failure" }, { 0x037200, "Session fixation error" }, { 0x037201, "Session fixation error writin lead-in" }, { 0x037202, "Session fixation error writin lead-out" }, { 0x037300, "CD control error" }, { 0x037302, "Power calibration area is full" }, { 0x037303, "Power calibration area error" }, { 0x037304, "Program memory area / RMA update failure" }, { 0x037305, "Program memory area / RMA is full" }, { 0x037306, "Program memory area / RMA is (almost) full" }, { 0x040200, "No seek complete" }, { 0x040300, "Write fault" }, { 0x040900, "Track following error" }, { 0x040901, "Tracking servo failure" }, { 0x040902, "Focus servo failure" }, { 0x040903, "Spindle servo failure" }, { 0x041500, "Random positioning error" }, { 0x041501, "Mechanical positioning or changer error" }, { 0x041502, "Positioning error detected by read of medium" }, { 0x043c00, "Mechanical positioning or changer error" }, { 0x044000, "Diagnostic failure on component (ASCQ)" }, { 0x044400, "Internal CD/DVD logical unit failure" }, { 0x04b600, "Media load mechanism failed" }, { 0x051a00, "Parameter list length error" }, { 0x052000, "Invalid command operation code" }, { 0x052100, "Logical block address out of range" }, { 0x052102, "Invalid address for write" }, { 0x052400, "Invalid field in command packet" }, { 0x052600, "Invalid field in parameter list" }, { 0x052601, "Parameter not supported" }, { 0x052602, "Parameter value invalid" }, { 0x052700, "Write protected media" }, { 0x052c00, "Command sequence error" }, { 0x052c03, "Current program area is not empty" }, { 0x052c04, "Current program area is empty" }, { 0x053001, "Cannot read medium - unknown format" }, { 0x053002, "Cannot read medium - incompatible format" }, { 0x053900, "Saving parameters not supported" }, { 0x054e00, "Overlapped commands attempted" }, { 0x055302, "Medium removal prevented" }, { 0x055500, "System resource failure" }, { 0x056300, "End of user area encountered on this track" }, { 0x056400, "Illegal mode for this track or incompatible medium" }, { 0x056f00, "Copy protection key exchange failure - Authentication failure" }, { 0x056f01, "Copy protection key exchange failure - Key not present" }, { 0x056f02, "Copy protection key exchange failure - Key not established" }, { 0x056f03, "Read of scrambled sector without authentication" }, { 0x056f04, "Media region code is mismatched to logical unit" }, { 0x056f05, "Drive region must be permanent / region reset count error" }, { 0x057203, "Session fixation error - incomplete track in session" }, { 0x057204, "Empty or partially written reserved track" }, { 0x057205, "No more RZONE reservations are allowed" }, { 0x05bf00, "Loss of streaming" }, { 0x062800, "Not ready to ready transition, medium may have changed" }, { 0x062900, "Power on, reset or hardware reset occurred" }, { 0x062a00, "Parameters changed" }, { 0x062a01, "Mode parameters changed" }, { 0x062e00, "Insufficient time for operation" }, { 0x063f00, "Logical unit operating conditions have changed" }, { 0x063f01, "Microcode has been changed" }, { 0x065a00, "Operator request or state change input (unspecified)" }, { 0x065a01, "Operator medium removal request" }, { 0x0bb900, "Play operation aborted" }, /* Here we use 0xff for the key (not a valid key) to signify * that these can have _any_ key value associated with them... */ { 0xff0401, "Logical unit is in process of becoming ready" }, { 0xff0400, "Logical unit not ready, cause not reportable" }, { 0xff0402, "Logical unit not ready, initializing command required" }, { 0xff0403, "Logical unit not ready, manual intervention required" }, { 0xff0500, "Logical unit does not respond to selection" }, { 0xff0800, "Logical unit communication failure" }, { 0xff0802, "Logical unit communication parity error" }, { 0xff0801, "Logical unit communication time-out" }, { 0xff2500, "Logical unit not supported" }, { 0xff4c00, "Logical unit failed self-configuration" }, { 0xff3e00, "Logical unit has not self-configured yet" }, }; #endif #endif /* _IDE_CD_H */