Remove support for using Geo with an installation from source

Using Geo with source-based installs was deprecated in GitLab 11.5.

This commit removes this support now that the deprecation notice has
been in place for quite a few releases.

changelogs/unreleased/11609-geo-remove-support-for-using-geo-with-an-installation-from-source-docs.yml

+---
+title: Remove support for using Geo with an installation from source
+merge_request: 28737
+author:
+type: other

doc/administration/geo/disaster_recovery/background_verification.md

@@ -29,12 +29,7 @@ the node more time before scheduling a planned failover.
 Run the following commands in a Rails console on the **primary** node:
 
 ```sh
-# Omnibus GitLab
 gitlab-rails console
-
-# Installation from source
-cd /home/git/gitlab
-sudo -u git -H bin/rails console RAILS_ENV=production
 ```
 
 To check if automatic background verification is enabled:
@@ -102,12 +97,7 @@ disable if you need. Run the following commands in a Rails console on the
 **primary** node:
 
 ```sh
-# Omnibus GitLab
 gitlab-rails console
-
-# Installation from source
-cd /home/git/gitlab
-sudo -u git -H bin/rails console RAILS_ENV=production
 ```
 
 To disable automatic background re-verification:
@@ -131,31 +121,15 @@ to be resynced without the backoff period:
 
 For repositories:
 
-- Omnibus Installation
-
-    ```sh
-    sudo gitlab-rake geo:verification:repository:reset
-    ```
-
-- Source Installation
-
-    ```sh
-    sudo -u git -H bundle exec rake geo:verification:repository:reset RAILS_ENV=production
-    ```
+```sh
+sudo gitlab-rake geo:verification:repository:reset
+```
 
 For wikis:
 
-- Omnibus Installation
-
-    ```sh
-    sudo gitlab-rake geo:verification:wiki:reset
-    ```
-
-- Source Installation
-
-    ```sh
-    sudo -u git -H bundle exec rake geo:verification:wiki:reset RAILS_ENV=production
-    ```
+```sh
+sudo gitlab-rake geo:verification:wiki:reset
+```
 
 ## Reconcile differences with checksum mismatches
 
@@ -169,7 +143,7 @@ If the **primary** and **secondary** nodes have a checksum verification mismatch
 1. On the project admin page get the **Gitaly storage name**, and **Gitaly relative path**:
    ![Project admin page](img/checksum-differences-admin-project-page.png)
 
-1. Navigate to the project's repository directory on both **primary** and **secondary** nodes. For an installation from source, the path is usually `/home/git/repositories`. For Omnibus installs, the path is usually `/var/opt/gitlab/git-data/repositories`. Note that if `git_data_dirs` is customized, check the directory layout on your server to be sure.
+1. Navigate to the project's repository directory on both **primary** and **secondary** nodes (the path is usually `/var/opt/gitlab/git-data/repositories`). Note that if `git_data_dirs` is customized, check the directory layout on your server to be sure.
 
     ```sh
     cd /var/opt/gitlab/git-data/repositories

doc/administration/geo/replication/configuration.md

-# Geo configuration (GitLab Omnibus) **[PREMIUM ONLY]**
-
-NOTE: **Note:**
-This is the documentation for the Omnibus GitLab packages. For installations
-from source, follow the [**Geo nodes configuration for installations
-from source**][configuration-source] guide.
+# Geo configuration **[PREMIUM ONLY]**
 
 ## Configuring a new **secondary** node
 
@@ -303,7 +298,6 @@ See the [updating the Geo nodes document](updating_the_geo_nodes.md).
 
 See the [troubleshooting document](troubleshooting.md).
 
-[configuration-source]: configuration_source.md
 [setup-geo-omnibus]: index.md#using-omnibus-gitlab
 [Hashed Storage]: ../../repository_storage_types.md
 [Disaster Recovery]: ../disaster_recovery/index.md

doc/administration/geo/replication/configuration_source.md

-# Geo configuration (source) **[PREMIUM ONLY]**
-
-NOTE: **Note:**
-This documentation applies to GitLab source installations. In GitLab 11.5, this documentation was deprecated and will be removed in a future release.
-Please consider [migrating to GitLab Omnibus install](https://docs.gitlab.com/omnibus/update/convert_to_omnibus.html). For installations
-using the Omnibus GitLab packages, follow the
-[**Omnibus Geo nodes configuration**][configuration] guide.
-
-## Configuring a new **secondary** node
-
-NOTE: **Note:**
-This is the final step in setting up a **secondary** node. Stages of the setup
-process must be completed in the documented order. Before attempting the steps
-in this stage, [complete all prior stages](index.md#using-gitlab-installed-from-source-deprecated).
-
-The basic steps of configuring a **secondary** node are to:
-
-- Replicate required configurations between the **primary** and **secondary** nodes.
-- Configure a tracking database on each **secondary** node.
-- Start GitLab on the **secondary** node.
-
-You are encouraged to first read through all the steps before executing them
-in your testing/production environment.
-
-NOTE: **Note:**
-**Do not** set up any custom authentication on **secondary** nodes, this will be handled by the **primary** node.
-
-NOTE: **Note:**
-**Do not** add anything in the **secondary** node's admin area (**Admin Area > Geo**). This is handled solely by the **primary** node.
-
-### Step 1. Manually replicate secret GitLab values
-
-GitLab stores a number of secret values in the `/home/git/gitlab/config/secrets.yml`
-file which *must* match between the **primary** and **secondary** nodes. Until there is
-a means of automatically replicating these between nodes (see [gitlab-org/gitlab-ee#3789]), they must
-be manually replicated to **secondary** nodes.
-
-1. SSH into the **primary** node, and execute the command below:
-
-    ```sh
-    sudo cat /home/git/gitlab/config/secrets.yml
-    ```
-
-    This will display the secrets that need to be replicated, in YAML format.
-
-1. SSH into the **secondary** node and login as the `git` user:
-
-    ```sh
-    sudo -i -u git
-    ```
-
-1. Make a backup of any existing secrets:
-
-    ```sh
-    mv /home/git/gitlab/config/secrets.yml /home/git/gitlab/config/secrets.yml.`date +%F`
-    ```
-
-1. Copy `/home/git/gitlab/config/secrets.yml` from the **primary** node to the **secondary** node, or
-   copy-and-paste the file contents between nodes:
-
-    ```sh
-    sudo editor /home/git/gitlab/config/secrets.yml
-
-    # paste the output of the `cat` command you ran on the primary
-    # save and exit
-    ```
-
-1. Ensure the file permissions are correct:
-
-    ```sh
-    chown git:git /home/git/gitlab/config/secrets.yml
-    chmod 0600 /home/git/gitlab/config/secrets.yml
-    ```
-
-1. Restart GitLab
-
-    ```sh
-    service gitlab restart
-    ```
-
-Once restarted, the **secondary** node will automatically start replicating missing data
-from the **primary** node in a process known as backfill. Meanwhile, the **primary** node
-will start to notify the **secondary** node of any changes, so that the **secondary** node can
-act on those notifications immediately.
-
-Make sure the **secondary** node is running and accessible. You can login to
-the **secondary** node with the same credentials as used for the **primary** node.
-
-### Step 2. Manually replicate the **primary** node's SSH host keys
-
-Read [Manually replicate the **primary** node's SSH host keys](configuration.md#step-2-manually-replicate-the-primary-nodes-ssh-host-keys)
-
-### Step 3. Add the **secondary** GitLab node
-
-1. Navigate to the **primary** node's **Admin Area > Geo**
-   (`/admin/geo/nodes`) in your browser.
-1. Add the **secondary** node by providing its full URL. **Do NOT** check the
-   **This is a primary node** checkbox.
-1. Optionally, choose which namespaces should be replicated by the
-   **secondary** node. Leave blank to replicate all. Read more in
-   [selective synchronization](#selective-synchronization).
-1. Click the **Add node** button.
-1. SSH into your GitLab **secondary** server and restart the services:
-
-    ```sh
-    service gitlab restart
-    ```
-
-    Check if there are any common issue with your Geo setup by running:
-
-    ```sh
-    bundle exec rake gitlab:geo:check
-    ```
-
-1. SSH into your GitLab **primary** server and login as root to verify the
-   **secondary** node is reachable or there are any common issue with your Geo setup:
-
-    ```sh
-    bundle exec rake gitlab:geo:check
-    ```
-
-Once reconfigured, the **secondary** node will automatically start
-replicating missing data from the **primary** node in a process known as backfill.
-Meanwhile, the **primary** node will start to notify the **secondary** node of any changes, so
-that the **secondary** node can act on those notifications immediately.
-
-Make sure the **secondary** node is running and accessible.
-You can log in to the **secondary** node with the same credentials as used for the **primary** node.
-
-### Step 4. Enabling Hashed Storage
-
-Read [Enabling Hashed Storage](configuration.md#step-4-enabling-hashed-storage).
-
-### Step 5. (Optional) Configuring the secondary to trust the primary
-
-You can safely skip this step if your **primary** node uses a CA-issued HTTPS certificate.
-
-If your **primary** node is using a self-signed certificate for *HTTPS* support, you will
-need to add that certificate to the **secondary** node's trust store. Retrieve the
-certificate from the **primary** node and follow your distribution's instructions for
-adding it to the **secondary** node's trust store. In Debian/Ubuntu, you would follow these steps:
-
-```sh
-sudo -i
-cp <primary_node_certification_file> /usr/local/share/ca-certificates
-update-ca-certificates
-```
-
-### Step 6. Enable Git access over HTTP/HTTPS
-
-Geo synchronizes repositories over HTTP/HTTPS, and therefore requires this clone
-method to be enabled. Navigate to **Admin Area > Settings**
-(`/admin/application_settings`) on the **primary** node, and set
-`Enabled Git access protocols` to `Both SSH and HTTP(S)` or `Only HTTP(S)`.
-
-### Step 7. Verify proper functioning of the secondary node
-
-Read [Verify proper functioning of the secondary node][configuration-verify-node].
-
-## Selective synchronization
-
-Read [Selective synchronization][configuration-selective-replication].
-
-## Troubleshooting
-
-Read the [troubleshooting document][troubleshooting].
-
-[gitlab-org/gitlab-ee#3789]: https://gitlab.com/gitlab-org/gitlab-ee/issues/3789
-[configuration]: configuration.md
-[configuration-selective-replication]: configuration.md#selective-synchronization
-[configuration-verify-node]: configuration.md#step-7-verify-proper-functioning-of-the-secondary-node
-[troubleshooting]: troubleshooting.md

doc/administration/geo/replication/database.md

-# Geo database replication (GitLab Omnibus) **[PREMIUM ONLY]**
+# Geo database replication **[PREMIUM ONLY]**
 
 NOTE: **Note:**
-This is the documentation for the Omnibus GitLab packages. For installations
-from source, follow the
-[Geo database replication (source)](database_source.md) guide.
+The following steps are for Omnibus installs only. Using Geo with source-based installs was **deprecated** in GitLab 11.5.
 
 NOTE: **Note:**
 If your GitLab installation uses external (not managed by Omnibus) PostgreSQL
@@ -102,10 +100,15 @@ There is an [issue where support is being discussed](https://gitlab.com/gitlab-o
     else.
 
     If you are using an external database not managed by Omnibus GitLab, you need
-    to create the replicator user and define a password to it manually.
-    For information on how to create a replication user, refer to the
-    [appropriate step](database_source.md#step-1-configure-the-primary-server)
-    in [Geo database replication (source)](database_source.md).
+    to create the replicator user and define a password to it manually:
+
+    ```sql
+    --- Create a new user 'replicator'
+    CREATE USER gitlab_replicator;
+
+    --- Set/change a password and grants replication privilege
+    ALTER USER gitlab_replicator WITH REPLICATION ENCRYPTED PASSWORD '<replication_password>';
+    ```
 
 1. Configure PostgreSQL to listen on network interfaces:
 
@@ -340,7 +343,7 @@ There is an [issue where support is being discussed](https://gitlab.com/gitlab-o
 
     ##
     ## Secondary address
-    ## - replace '<secondary_node_ip>' with the public or VPC address of your Geo secondary node 
+    ## - replace '<secondary_node_ip>' with the public or VPC address of your Geo secondary node
     ##
     postgresql['listen_address'] = '<secondary_node_ip>'
     postgresql['md5_auth_cidr_addresses'] = ['<secondary_node_ip>/32']
@@ -383,8 +386,7 @@ the database on the **primary** node, replicates the database, and creates the
 needed files for streaming replication.
 
 The directories used are the defaults that are set up in Omnibus. If you have
-changed any defaults or are using a source installation, configure it as you
-see fit replacing the directories and paths.
+changed any defaults, configure it as you see fit replacing the directories and paths.
 
 CAUTION: **Warning:**
 Make sure to run this on the **secondary** server as it removes all PostgreSQL's

doc/administration/geo/replication/database_source.md

-# Geo database replication (source) **[PREMIUM ONLY]**
-
-NOTE: **Note:**
-This documentation applies to GitLab source installations. In GitLab 11.5, this documentation was deprecated and will be removed in a future release.
-Please consider [migrating to GitLab Omnibus install](https://docs.gitlab.com/omnibus/update/convert_to_omnibus.html). For installations
-using the Omnibus GitLab packages, follow the
-[**database replication for Omnibus GitLab**][database] guide.
-
-NOTE: **Note:**
-The stages of the setup process must be completed in the documented order.
-Before attempting the steps in this stage, [complete all prior stages](index.md#using-gitlab-installed-from-source-deprecated).
-
-This document describes the minimal steps you have to take in order to
-replicate your **primary** GitLab database to a **secondary** node's database. You may
-have to change some values according to your database setup, how big it is, etc.
-
-You are encouraged to first read through all the steps before executing them
-in your testing/production environment.
-
-## PostgreSQL replication
-
-The GitLab **primary** node where the write operations happen will connect to
-**primary** database server, and the **secondary** ones which are read-only will
-connect to **secondary** database servers (which are read-only too).
-
-NOTE: **Note:**
-In many databases' documentation, you will see "**primary**" being referenced as "master"
-and "**secondary**" as either "slave" or "standby" server (read-only).
-
-We recommend using [PostgreSQL replication slots][replication-slots-article]
-to ensure the **primary** node retains all the data necessary for the secondaries to
-recover. See below for more details.
-
-The following guide assumes that:
-
-- You are using PostgreSQL 9.6 or later which includes the
-  [`pg_basebackup` tool][pgback] and improved [Foreign Data Wrapper][FDW] support.
-- You have a **primary** node already set up (the GitLab server you are
-  replicating from), running PostgreSQL 9.6 or later, and
-  you have a new **secondary** server set up with the same versions of the OS,
-  PostgreSQL, and GitLab on all nodes.
-- The IP of the **primary** server for our examples is `198.51.100.1`, whereas the
-  **secondary** node's IP is `198.51.100.2`. Note that the **primary** and **secondary** servers
-  **must** be able to communicate over these addresses. These IP addresses can either
-  be public or private.
-  
-CAUTION: **Warning:**
-Geo works with streaming replication. Logical replication is not supported at this time. 
-There is an [issue where support is being discussed](https://gitlab.com/gitlab-org/gitlab-ee/issues/7420).
-
-### Step 1. Configure the **primary** server
-
-1. SSH into your GitLab **primary** server and login as root:
-
-    ```sh
-    sudo -i
-    ```
-
-1. Add this node as the Geo **primary** by running:
-
-    ```sh
-    bundle exec rake geo:set_primary_node
-    ```
-
-1. Create a [replication user] named `gitlab_replicator`:
-
-    ```sql
-    --- Create a new user 'replicator'
-    CREATE USER gitlab_replicator;
-
-    --- Set/change a password and grants replication privilege
-    ALTER USER gitlab_replicator WITH REPLICATION ENCRYPTED PASSWORD '<replication_password>';
-    ```
-
-1. Make sure your the `gitlab` database user has a password defined:
-
-    ```sh
-    sudo \
-       -u postgres psql \
-       -d template1 \
-       -c "ALTER USER gitlab WITH ENCRYPTED PASSWORD '<database_password>';"
-    ```
-
-1. Edit the content of `database.yml` in `production:` and add the password like the example below:
-
-    ```yaml
-    #
-    # PRODUCTION
-    #
-    production:
-      adapter: postgresql
-      encoding: unicode
-      database: gitlabhq_production
-      pool: 10
-      username: gitlab
-      password: <database_password>
-      host: /var/opt/gitlab/geo-postgresql
-    ```
-
-1. Set up TLS support for the PostgreSQL **primary** server:
-
-    CAUTION: **Warning**:
-    Only skip this step if you **know** that PostgreSQL traffic
-    between the **primary** and **secondary** nodes will be secured through some other
-    means, e.g., a known-safe physical network path or a site-to-site VPN that
-    you have configured.
-
-    If you are replicating your database across the open Internet, it is
-    **essential** that the connection is TLS-secured. Correctly configured, this
-    provides protection against both passive eavesdroppers and active
-    "man-in-the-middle" attackers.
-
-    To generate a self-signed certificate and key, run this command:
-
-    ```sh
-    openssl req \
-       -nodes \
-       -batch \
-       -x509 \
-       -newkey rsa:4096 \
-       -keyout server.key \
-       -out server.crt \
-       -days 3650
-    ```
-
-    This will create two files - `server.key` and `server.crt` - that you can
-    use for authentication.
-
-    Copy them to the correct location for your PostgreSQL installation:
-
-    ```sh
-    # Copying a self-signed certificate and key
-    install -o postgres -g postgres -m 0400 -T server.crt ~postgres/9.x/main/data/server.crt
-    install -o postgres -g postgres -m 0400 -T server.key ~postgres/9.x/main/data/server.key
-    ```
-
-    Add this configuration to `postgresql.conf`, removing any existing
-    configuration for `ssl_cert_file` or `ssl_key_file`:
-
-    ```
-    ssl = on
-    ssl_cert_file='server.crt'
-    ssl_key_file='server.key'
-    ```
-
-1. Edit `postgresql.conf` to configure the **primary** server for streaming replication
-   (for Debian/Ubuntu that would be `/etc/postgresql/9.x/main/postgresql.conf`):
-
-    ```
-    listen_address = '<primary_node_ip>'
-    wal_level = hot_standby
-    max_wal_senders = 5
-    min_wal_size = 80MB
-    max_wal_size = 1GB
-    max_replicaton_slots = 1 # Number of Geo secondary nodes
-    wal_keep_segments = 10
-    hot_standby = on
-    ```
-
-    NOTE: **Note**:
-    Be sure to set `max_replication_slots` to the number of Geo **secondary**
-    nodes that you may potentially have (at least 1).
-
-    For security reasons, PostgreSQL by default only listens on the local
-    interface (e.g. 127.0.0.1). However, Geo needs to communicate
-    between the **primary** and **secondary** nodes over a common network, such as a
-    corporate LAN or the public Internet. For this reason, we need to
-    configure PostgreSQL to listen on more interfaces.
-
-    The `listen_address` option opens PostgreSQL up to external connections
-    with the interface corresponding to the given IP. See [the PostgreSQL
-    documentation][pg-docs-runtime-conn] for more details.
-
-    You may also want to edit the `wal_keep_segments` and `max_wal_senders` to
-    match your database replication requirements. Consult the
-    [PostgreSQL - Replication documentation][pg-docs-runtime-replication] for more information.
-
-1. Set the access control on the **primary** node to allow TCP connections using the
-   server's public IP and set the connection from the **secondary** node to require a
-   password. Edit `pg_hba.conf` (for Debian/Ubuntu that would be
-   `/etc/postgresql/9.x/main/pg_hba.conf`):
-
-    ```sh
-    host    all             all                      <primary_node_ip>/32      md5
-    host    replication     gitlab_replicator        <secondary_node_ip>/32      md5
-    ```
-
-    If you want to add another secondary, add one more row like the replication 
-    one and change the IP address:
-
-    ```sh
-    host    all             all                      <primary_node_ip>/32      md5
-    host    replication     gitlab_replicator        <secondary_node_ip>/32      md5
-    host    replication     gitlab_replicator        <another_secondary_node_ip>/32  md5
-    ```
-
-1. Restart PostgreSQL for the changes to take effect.
-
-1. Choose a database-friendly name to use for your secondary to use as the
-   replication slot name. For example, if your domain is
-   `secondary.geo.example.com`, you may use `secondary_example` as the slot
-   name.
-
-1. Create the replication slot on the **primary** node:
-
-    ```sh
-    $ sudo -u postgres psql -c "SELECT * FROM pg_create_physical_replication_slot('secondary_example');"
-      slot_name         | xlog_position
-      ------------------+---------------
-      secondary_example |
-      (1 row)
-    ```
-
-1. Now that the PostgreSQL server is set up to accept remote connections, run
-   `netstat -plnt` to make sure that PostgreSQL is listening to the server's
-   public IP.
-
-### Step 2. Configure the secondary server
-
-Follow the first steps in ["configure the secondary server"][database-replication] and note that since you are installing from source, the username and
-group listed as `gitlab-psql` in those steps should be replaced by `postgres`
-instead. After completing the "Test that the `gitlab-psql` user can connect to
-the **primary** node's database" step, continue here:
-
-1. Edit `postgresql.conf` to configure the secondary for streaming replication
-   (for Debian/Ubuntu that would be `/etc/postgresql/9.*/main/postgresql.conf`):
-
-    ```sh
-    wal_level = hot_standby
-    max_wal_senders = 5
-    checkpoint_segments = 10
-    wal_keep_segments = 10
-    hot_standby = on
-    ```
-
-1. Restart PostgreSQL for the changes to take effect.
-
-#### Enable tracking database on the secondary server
-
-Geo secondary nodes use a tracking database to keep track of replication status
-and recover automatically from some replication issues. Follow the steps below to create
-the tracking database.
-
-1. On the secondary node, run the following command to create `database_geo.yml` with the
-   information of your secondary PostgreSQL instance:
-
-    ```sh
-    sudo cp /home/git/gitlab/config/database_geo.yml.postgresql /home/git/gitlab/config/database_geo.yml
-    ```
-
-1. Edit the content of `database_geo.yml` in `production:` as in the example below:
-
-    ```yaml
-    #
-    # PRODUCTION
-    #
-    production:
-      adapter: postgresql
-      encoding: unicode
-      database: gitlabhq_geo_production
-      pool: 10
-      username: gitlab_geo
-      # password:
-      host: /var/opt/gitlab/geo-postgresql
-    ```
-
-1. Create the database `gitlabhq_geo_production` on the PostgreSQL instance of the **secondary** node.
-
-1. Set up the Geo tracking database:
-
-    ```sh
-    bundle exec rake geo:db:migrate
-    ```
-
-1. Configure the [PostgreSQL FDW][FDW] connection and credentials:
-
-    Save the script below in a file, ex. `/tmp/geo_fdw.sh` and modify the connection
-    params to match your environment. Execute it to set up the FDW connection.
-
-    ```sh
-    #!/bin/bash
-
-    # Secondary Database connection params:
-    DB_HOST="/var/opt/gitlab/postgresql" # change to the public IP or VPC private IP if its an external server
-    DB_NAME="gitlabhq_production"
-    DB_USER="gitlab"
-    DB_PORT="5432"
-
-    # Tracking Database connection params:
-    GEO_DB_HOST="/var/opt/gitlab/geo-postgresql" # change to the public IP or VPC private IP if its an external server
-    GEO_DB_NAME="gitlabhq_geo_production"
-    GEO_DB_USER="gitlab_geo"
-    GEO_DB_PORT="5432"
-
-    query_exec () {
-      gitlab-psql -h $GEO_DB_HOST -d $GEO_DB_NAME -p $GEO_DB_PORT -c "${1}"
-    }
-
-    query_exec "CREATE EXTENSION postgres_fdw;"
-    query_exec "CREATE SERVER gitlab_secondary FOREIGN DATA WRAPPER postgres_fdw OPTIONS (host '${DB_HOST}', dbname '${DB_NAME}', port '${DB_PORT}');"
-    query_exec "CREATE USER MAPPING FOR ${GEO_DB_USER} SERVER gitlab_secondary OPTIONS (user '${DB_USER}');"
-    query_exec "CREATE SCHEMA gitlab_secondary;"
-    query_exec "GRANT USAGE ON FOREIGN SERVER gitlab_secondary TO ${GEO_DB_USER};"
-    ```
-
-    And edit the content of `database_geo.yml` and to add `fdw: true` to
-    the  `production:` block.
-
-### Step 3. Initiate the replication process
-
-Below we provide a script that connects the database on the **secondary** node to
-the database on the **primary** node, replicates the database, and creates the
-needed files for streaming replication.
-
-The directories used are the defaults for Debian/Ubuntu. If you have changed
-any defaults, configure it as you see fit replacing the directories and paths.
-
-CAUTION: **Warning:**
-Make sure to run this on the **secondary** server as it removes all PostgreSQL's
-data before running `pg_basebackup`.
-
-1. SSH into your GitLab **secondary** server and login as root:
-
-    ```sh
-    sudo -i
-    ```
-
-1. Save the snippet below in a file, let's say `/tmp/replica.sh`. Modify the
-   embedded paths if necessary:
-
-    ```
-    #!/bin/bash
-
-    PORT="5432"
-    USER="gitlab_replicator"
-    echo ---------------------------------------------------------------
-    echo WARNING: Make sure this script is run from the secondary server
-    echo ---------------------------------------------------------------
-    echo
-    echo Enter the IP or FQDN of the primary PostgreSQL server
-    read HOST
-    echo Enter the password for $USER@$HOST
-    read -s PASSWORD
-    echo Enter the required sslmode
-    read SSLMODE
-
-    echo Stopping PostgreSQL and all GitLab services
-    sudo service gitlab stop
-    sudo service postgresql stop
-
-    echo Backing up postgresql.conf
-    sudo -u postgres mv /var/opt/gitlab/postgresql/data/postgresql.conf /var/opt/gitlab/postgresql/
-
-    echo Cleaning up old cluster directory
-    sudo -u postgres rm -rf /var/opt/gitlab/postgresql/data
-
-    echo Starting base backup as the replicator user
-    echo Enter the password for $USER@$HOST
-    sudo -u postgres /opt/gitlab/embedded/bin/pg_basebackup -h $HOST -D /var/opt/gitlab/postgresql/data -U gitlab_replicator -v -x -P
-
-    echo Writing recovery.conf file
-    sudo -u postgres bash -c "cat > /var/opt/gitlab/postgresql/data/recovery.conf <<- _EOF1_
-      standby_mode = 'on'
-      primary_conninfo = 'host=$HOST port=$PORT user=$USER password=$PASSWORD sslmode=$SSLMODE'
-    _EOF1_
-    "
-
-    echo Restoring postgresql.conf
-    sudo -u postgres mv /var/opt/gitlab/postgresql/postgresql.conf /var/opt/gitlab/postgresql/data/
-
-    echo Starting PostgreSQL
-    sudo service postgresql start
-    ```
-
-1. Run it with:
-
-    ```sh
-    bash /tmp/replica.sh
-    ```
-
-    When prompted, enter the IP/FQDN of the **primary** node, and the password you set up
-    for the `gitlab_replicator` user in the first step.
-
-    You should use `verify-ca` for the `sslmode`. You can use `disable` if you
-    are happy to skip PostgreSQL TLS authentication altogether (e.g., you know
-    the network path is secure, or you are using a site-to-site VPN). This is
-    **not** safe over the public Internet!
-
-    You can read more details about each `sslmode` in the
-    [PostgreSQL documentation][pg-docs-ssl];
-    the instructions above are carefully written to ensure protection against
-    both passive eavesdroppers and active "man-in-the-middle" attackers.
-
-The replication process is now over.
-
-## PGBouncer support (optional)
-
-1. First, enter the PostgreSQL console as an admin user.
-
-1. Then create the read-only user:
-
-    ```sql
-    -- NOTE: Use the password defined earlier
-    CREATE USER gitlab_geo_fdw WITH password '<your_password_here>';
-    GRANT CONNECT ON DATABASE gitlabhq_production to gitlab_geo_fdw;
-    GRANT USAGE ON SCHEMA public TO gitlab_geo_fdw;
-    GRANT SELECT ON ALL TABLES IN SCHEMA public TO gitlab_geo_fdw;
-    GRANT SELECT ON ALL SEQUENCES IN SCHEMA public TO gitlab_geo_fdw;
-
-    -- Tables created by "gitlab" should be made read-only for "gitlab_geo_fdw"
-    -- automatically.
-    ALTER DEFAULT PRIVILEGES FOR USER gitlab IN SCHEMA public GRANT SELECT ON TABLES TO gitlab_geo_fdw;
-    ALTER DEFAULT PRIVILEGES FOR USER gitlab IN SCHEMA public GRANT SELECT ON SEQUENCES TO gitlab_geo_fdw;
-    ```
-
-1. Enter the PostgreSQL console on the **secondary** tracking database and change the user mapping to this new user:
-
-    ```
-    ALTER USER MAPPING FOR gitlab_geo SERVER gitlab_secondary OPTIONS (SET user 'gitlab_geo_fdw')
-    ```
-
-## MySQL replication
-
-MySQL replication is not supported for Geo.
-
-## Troubleshooting
-
-Read the [troubleshooting document](troubleshooting.md).
-
-[replication-slots-article]: https://medium.com/@tk512/replication-slots-in-postgresql-b4b03d277c75
-[pgback]: http://www.postgresql.org/docs/9.6/static/app-pgbasebackup.html
-[replication user]:https://wiki.postgresql.org/wiki/Streaming_Replication
-[FDW]: https://www.postgresql.org/docs/9.6/static/postgres-fdw.html
-[database]: database.md
-[add-geo-node]: configuration.md#step-3-add-the-secondary-gitlab-node
-[database-replication]: database.md#step-2-configure-the-secondary-server
-[pg-docs-ssl]: https://www.postgresql.org/docs/9.6/static/libpq-ssl.html#LIBPQ-SSL-PROTECTION
-[pg-docs-runtime-conn]: https://www.postgresql.org/docs/9.6/static/runtime-config-connection.html
-[pg-docs-runtime-replication]: https://www.postgresql.org/docs/9.6/static/runtime-config-replication.html

doc/administration/geo/replication/index.md

@@ -186,30 +186,13 @@ If you installed GitLab using the Omnibus packages (highly recommended):
 1. Optional: [Configure a secondary LDAP server](../../auth/ldap.md) for the **secondary** node. See [notes on LDAP](#ldap).
 1. [Follow the "Using a Geo Server" guide](using_a_geo_server.md).
 
-### Using GitLab installed from source (Deprecated)
-
-NOTE: **Note:**
-In GitLab 11.5, support for using Geo in GitLab source installations was deprecated and will be removed in a future release. Please consider [migrating to GitLab Omnibus install](https://docs.gitlab.com/omnibus/update/convert_to_omnibus.html).
-
-If you installed GitLab from source:
-
-1. [Install GitLab Enterprise Edition](../../../install/installation.md) on the server that will serve as the **secondary** node. Do not create an account or log in to the new **secondary** node.
-1. [Upload the GitLab License](https://docs.gitlab.com/ee/user/admin_area/license.html) on the **primary** node to unlock Geo. The license must be for [GitLab Premium](https://about.gitlab.com/pricing/) or higher.
-1. [Set up the database replication](database_source.md) (`primary (read-write) <-> secondary (read-only)` topology).
-1. [Configure fast lookup of authorized SSH keys in the database](../../operations/fast_ssh_key_lookup.md). Do this step for **both** **primary** and **secondary** nodes.
-1. [Configure GitLab](configuration_source.md) to set the **primary** and **secondary** nodes.
-1. [Follow the "Using a Geo Server" guide](using_a_geo_server.md).
-
 ## Post-installation documentation
 
 After installing GitLab on the **secondary** nodes and performing the initial configuration, see the following documentation for post-installation information.
 
 ### Configuring Geo
 
-For information on configuring Geo, see:
-
-- [Geo configuration (GitLab Omnibus)](configuration.md).
-- [Geo configuration (source)](configuration_source.md). Configuring Geo in GitLab source installations was **deprecated** in GitLab 11.5.
+For information on configuring Geo, see [Geo configuration](configuration.md).
 
 ### Updating Geo
 

doc/administration/geo/replication/security_review.md

@@ -120,9 +120,7 @@ questions from [owasp.org](https://www.owasp.org).
 
 ### What details regarding required OS components and lock‐down needs have been defined?
 
-- The recommended installation method (Omnibus) packages most components itself.
-  A from-source installation method exists. Both are documented at
-  <https://docs.gitlab.com/ee/administration/geo/replication/index.html>
+- The supported installation method (Omnibus) packages most components itself.
 - There are significant dependencies on the system-installed OpenSSH daemon (Geo
   requires users to set up custom authentication methods) and the omnibus or
   system-provided PostgreSQL daemon (it must be configured to listen on TCP,

doc/administration/geo/replication/troubleshooting.md

@@ -310,7 +310,7 @@ same host on different ports. That is, 5432 and 5431 respectively.
 ### Checking configuration
 
 NOTE: **Note:**
-The following steps are for Omnibus installs only. Using Geo with source-based installs [is deprecated](index.md#using-gitlab-installed-from-source-deprecated).
+The following steps are for Omnibus installs only. Using Geo with source-based installs was **deprecated** in GitLab 11.5.
 
 To check the configuration:
 

doc/administration/geo/replication/updating_the_geo_nodes.md

@@ -337,6 +337,53 @@ is prepended with the relevant node for better clarity:
     1. **[secondary]** Create the `replica.sh` script as described in the
        [database configuration document][database-source-replication].
 
+    1. 1. **[secondary]** Save the snippet below in a file, let's say `/tmp/replica.sh`. Modify the
+       embedded paths if necessary:
+
+        ```
+        #!/bin/bash
+
+        PORT="5432"
+        USER="gitlab_replicator"
+        echo ---------------------------------------------------------------
+        echo WARNING: Make sure this script is run from the secondary server
+        echo ---------------------------------------------------------------
+        echo
+        echo Enter the IP or FQDN of the primary PostgreSQL server
+        read HOST
+        echo Enter the password for $USER@$HOST
+        read -s PASSWORD
+        echo Enter the required sslmode
+        read SSLMODE
+
+        echo Stopping PostgreSQL and all GitLab services
+        sudo service gitlab stop
+        sudo service postgresql stop
+
+        echo Backing up postgresql.conf
+        sudo -u postgres mv /var/opt/gitlab/postgresql/data/postgresql.conf /var/opt/gitlab/postgresql/
+
+        echo Cleaning up old cluster directory
+        sudo -u postgres rm -rf /var/opt/gitlab/postgresql/data
+
+        echo Starting base backup as the replicator user
+        echo Enter the password for $USER@$HOST
+        sudo -u postgres /opt/gitlab/embedded/bin/pg_basebackup -h $HOST -D /var/opt/gitlab/postgresql/data -U gitlab_replicator -v -x -P
+
+        echo Writing recovery.conf file
+        sudo -u postgres bash -c "cat > /var/opt/gitlab/postgresql/data/recovery.conf <<- _EOF1_
+          standby_mode = 'on'
+          primary_conninfo = 'host=$HOST port=$PORT user=$USER password=$PASSWORD sslmode=$SSLMODE'
+        _EOF1_
+        "
+
+        echo Restoring postgresql.conf
+        sudo -u postgres mv /var/opt/gitlab/postgresql/postgresql.conf /var/opt/gitlab/postgresql/data/
+
+        echo Starting PostgreSQL
+        sudo service postgresql start
+        ```
+
     1. **[secondary]** Run the recovery script using the credentials from the
        previous step:
 
@@ -396,8 +443,6 @@ and it is required since 10.0.
 
 [update]: ../../../update/README.md
 [database]: database.md
-[database-replication]: database.md#step-3-initiate-the-replication-process
-[database-source-replication]: database_source.md#step-3-initiate-the-replication-process
 [Hashed Storage]: ../../repository_storage_types.md
 [hashed-migration]: ../../raketasks/storage.md
 [ssh-fast-lookup]: ../../operations/fast_ssh_key_lookup.md

doc/development/architecture.md

@@ -135,7 +135,7 @@ Component statuses are linked to configuration documentation for each component.
 | [Runner](#gitlab-runner) | Executes GitLab CI jobs | [⤓][runner-omnibus] | [✅][runner-charts] | [⚙][runner-charts] | [✅](https://docs.gitlab.com/ee/user/gitlab_com/#shared-runners) | [⚙][runner-source] | [⚙][runner-gdk] | CE & EE |
 | [Database Migrations](#database-migrations) | Database migrations | [✅][database-migrations-omnibus] | [✅][database-migrations-charts] | [✅][database-migrations-charts] | ✅ | [⚙][database-migrations-source] | ✅ | CE & EE |
 | [Certificate Management](#certificate-management) | TLS Settings, Let's Encrypt | [✅][certificate-management-omnibus] | [✅][certificate-management-charts] | [⚙][certificate-management-charts] | [✅](https://about.gitlab.com/handbook/engineering/infrastructure/production-architecture/#secrets-management) | [⚙][certificate-management-source] | [⚙][certificate-management-gdk] | CE & EE |
-| [GitLab Geo Node](#gitlab-geo) | Geographically distributed GitLab nodes | [⚙][geo-omnibus] | [❌][geo-charts] | [❌][geo-charts] | ✅ | [❌](../administration/geo/replication/configuration_source.md) | [⚙][geo-gdk] | EE Only |
+| [GitLab Geo Node](#gitlab-geo) | Geographically distributed GitLab nodes | [⚙][geo-omnibus] | [❌][geo-charts] | [❌][geo-charts] | ✅ | ❌ | [⚙][geo-gdk] | EE Only |
 | [LDAP Authentication](#ldap-authentication) | Authenticate users against centralized LDAP directory | [⤓][ldap-omnibus] | [⤓][ldap-charts] | [⤓][ldap-charts] | [❌](https://about.gitlab.com/pricing/#gitlab-com) | [⤓][gitlab-yml] | [⤓][ldap-gdk] | CE & EE |
 | [Outbound email (SMTP)](#outbound-email) | Send email messages to users | [⤓][outbound-email-omnibus] | [⤓][outbound-email-charts] | [⤓][outbound-email-charts] | [✅](https://docs.gitlab.com/ee/user/gitlab_com/#mail-configuration) | [⤓][gitlab-yml] | [⤓][gitlab-yml] | CE & EE |
 | [Inbound email (SMTP)](#inbound-email) | Receive messages to update issues | [⤓][inbound-email-omnibus] | [⤓][inbound-email-charts] | [⤓][inbound-email-charts] | [✅](https://docs.gitlab.com/ee/user/gitlab_com/#mail-configuration) | [⤓][gitlab-yml] | [⤓][gitlab-yml] |  CE & EE |

doc/gitlab-geo/configuration_source.md

 ---
-redirect_to: '../administration/geo/replication/configuration_source.md'
+redirect_to: '../administration/geo/replication/configuration.md'
 ---
 
-This document was moved to [another location](../administration/geo/replication/configuration_source.md).
+This document was moved to [another location](../administration/geo/replication/configuration.md).

doc/gitlab-geo/database_source.md

 ---
-redirect_to: '../administration/geo/replication/database_source.md'
+redirect_to: '../administration/geo/replication/database.md'
 ---
 
-This document was moved to [another location](../administration/geo/replication/database_source.md).
+This document was moved to [another location](../administration/geo/replication/database.md).