• Jürgen Stuber's avatar
    [PATCH] USB: LEGO USB Tower driver v0.95 · d28412d9
    Jürgen Stuber authored
    here is the latest version 0.95 of the LEGO USB Tower driver against 2.6.6-rc3
    which corrects a lot of problems in the version currently in the kernel,
    most notably sleeping in interrupt context and improper locking.
    Please apply.
    
    It has been thoroughly tested with UHCI, OHCI and EHCI host controllers
    using Lejos and NQC.  Firmware and program download, and with proper
    modifications all communication protocols supported by Lejos work,
    as well as firmware and program download and datalog upload in NQC.
    
    Notes to application maintainers/protocol designers:
    
    - Small modifications are needed in communication protocols because
      the tower tends to discard the first byte of transmissions.
      So for example LNP needs to send an extra byte like 0xff before
      the packet, and F7 handlers needs to cope with a lost 0x55.
    
    - I suggest /dev/usb/legousbtower0 etc. as the standard device names.
      This puts it in the same place as the other USB devices and makes
      clear which driver is responsible for these devices.
    d28412d9
MAINTAINERS 50.6 KB