Skip to content

L
linux
Commit 056df578 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc 

Pull ARC updates from Vineet Gupta

 - Jump Label support for ARC

 - kmemleak enabled

 - arc mm backend TLB Miss / flush optimizations

 - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig
   updates and cleanups

 - axs platform pll / video-mode updates

* tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: add kmemleak support
  ARC: [plat-axs10x]: remove hardcoded video mode from bootargs
  ARC: [plat-axs10x]: use pgu pll instead of fixed clock
  ARC: ARCv2: jump label: implement jump label patching
  ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3
  ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop
  ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available
  ARC: mm: TLB Miss optim: avoid re-reading ECR
  ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD
  ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg
  ARC: nSIM_700: remove unused network options
  ARC: nSIM_700: switch to DW UART usage
  ARC: merge HAPS-HS with nSIM-HS configs
  ARC: HAPS: cleanup defconfigs from unused ETH drivers
  ARC: HAPS: add HIGHMEM memory zone to DTS
  ARC: HAPS: use same UART configuration everywhere
  ARC: HAPS: cleanup defconfigs from unused IO-related options
  ARC: regenerate nSIM and HAPS defconfigs
parents aedc0650 9fbea0b7
Hide whitespace changes
Inline Side-by-side
Showing with 363 additions and 411 deletions
arch/arc/Kconfig
View file @ 056df578
...@@ -29,6 +29,7 @@ config ARC ...@@ -29,6 +29,7 @@ config ARC
select HAVE_ARCH_KGDB select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRACEHOOK
select HAVE_DEBUG_STACKOVERFLOW select HAVE_DEBUG_STACKOVERFLOW
select HAVE_DEBUG_KMEMLEAK
select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_IOREMAP_PROT select HAVE_IOREMAP_PROT
select HAVE_KERNEL_GZIP select HAVE_KERNEL_GZIP
...@@ -45,6 +46,7 @@ config ARC ...@@ -45,6 +46,7 @@ config ARC
select OF_EARLY_FLATTREE select OF_EARLY_FLATTREE
select PCI_SYSCALL if PCI select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
config ARCH_HAS_CACHE_LINE_SIZE config ARCH_HAS_CACHE_LINE_SIZE
def_bool y def_bool y
...@@ -524,6 +526,13 @@ config ARC_DW2_UNWIND ...@@ -524,6 +526,13 @@ config ARC_DW2_UNWIND
config ARC_DBG_TLB_PARANOIA config ARC_DBG_TLB_PARANOIA
bool "Paranoia Checks in Low Level TLB Handlers" bool "Paranoia Checks in Low Level TLB Handlers"
config ARC_DBG_JUMP_LABEL
bool "Paranoid checks in Static Keys (jump labels) code"
depends on JUMP_LABEL
default y if STATIC_KEYS_SELFTEST
help
Enable paranoid checks and self-test of both ARC-specific and generic
part of static keys (jump labels) related code.
endif endif
config ARC_BUILTIN_DTB_NAME config ARC_BUILTIN_DTB_NAME
......
arch/arc/Makefile
View file @ 056df578
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
# #
KBUILD_DEFCONFIG := nsim_hs_defconfig KBUILD_DEFCONFIG := haps_hs_smp_defconfig
ifeq ($(CROSS_COMPILE),) ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
......
arch/arc/boot/dts/axc001.dtsi
View file @ 056df578
...@@ -28,6 +28,12 @@ core_clk: core_clk { ...@@ -28,6 +28,12 @@ core_clk: core_clk {
clock-frequency = <750000000>; clock-frequency = <750000000>;
}; };
input_clk: input-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <33333333>;
};
core_intc: arc700-intc@cpu { core_intc: arc700-intc@cpu {
compatible = "snps,arc700-intc"; compatible = "snps,arc700-intc";
interrupt-controller; interrupt-controller;
......
arch/arc/boot/dts/axs101.dts
View file @ 056df578
...@@ -14,6 +14,6 @@ / { ...@@ -14,6 +14,6 @@ / {
compatible = "snps,axs101", "snps,arc-sdp"; compatible = "snps,axs101", "snps,arc-sdp";
chosen { chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1"; bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1";
}; };
}; };
arch/arc/boot/dts/axs103_idu.dts
View file @ 056df578
...@@ -17,6 +17,6 @@ / { ...@@ -17,6 +17,6 @@ / {
compatible = "snps,axs103", "snps,arc-sdp"; compatible = "snps,axs103", "snps,arc-sdp";
chosen { chosen {
bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0 video=1280x720@60"; bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0";
}; };
}; };
arch/arc/boot/dts/axs10x_mb.dtsi
View file @ 056df578
...@@ -61,12 +61,13 @@ mmcclk: mmcclk { ...@@ -61,12 +61,13 @@ mmcclk: mmcclk {
clock-frequency = <25000000>; clock-frequency = <25000000>;
#clock-cells = <0>; #clock-cells = <0>;
}; };
};
pguclk: pguclk { pguclk: pguclk@10080 {
#clock-cells = <0>; compatible = "snps,axs10x-pgu-pll-clock";
compatible = "fixed-clock"; reg = <0x10080 0x10>, <0x110 0x10>;
clock-frequency = <74250000>; #clock-cells = <0>;
}; clocks = <&input_clk>;
}; };
gmac: ethernet@18000 { gmac: ethernet@18000 {
......
arch/arc/boot/dts/haps_hs.dts
View file @ 056df578
...@@ -9,13 +9,15 @@ ...@@ -9,13 +9,15 @@
/ { / {
model = "snps,zebu_hs"; model = "snps,zebu_hs";
compatible = "snps,zebu_hs"; compatible = "snps,zebu_hs";
#address-cells = <1>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <2>;
interrupt-parent = <&core_intc>; interrupt-parent = <&core_intc>;
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 */ /* CONFIG_LINUX_RAM_BASE needs to match low mem start */
reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */
0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */
}; };
chosen { chosen {
...@@ -31,8 +33,9 @@ fpga { ...@@ -31,8 +33,9 @@ fpga {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
/* child and parent address space 1:1 mapped */ /* only perip space at end of low mem accessible
ranges; bus addr, parent bus addr, size */
ranges = <0x80000000 0x0 0x80000000 0x80000000>;
core_clk: core_clk { core_clk: core_clk {
#clock-cells = <0>; #clock-cells = <0>;
...@@ -47,7 +50,7 @@ core_intc: interrupt-controller { ...@@ -47,7 +50,7 @@ core_intc: interrupt-controller {
}; };
uart0: serial@f0000000 { uart0: serial@f0000000 {
compatible = "ns8250"; compatible = "ns16550a";
reg = <0xf0000000 0x2000>; reg = <0xf0000000 0x2000>;
interrupts = <24>; interrupts = <24>;
clock-frequency = <50000000>; clock-frequency = <50000000>;
......
arch/arc/boot/dts/haps_hs_idu.dts
View file @ 056df578
...@@ -54,7 +54,6 @@ idu_intc: idu-interrupt-controller { ...@@ -54,7 +54,6 @@ idu_intc: idu-interrupt-controller {
}; };
uart0: serial@f0000000 { uart0: serial@f0000000 {
/* compatible = "ns8250"; Doesn't use FIFOs */
compatible = "ns16550a"; compatible = "ns16550a";
reg = <0xf0000000 0x2000>; reg = <0xf0000000 0x2000>;
interrupt-parent = <&idu_intc>; interrupt-parent = <&idu_intc>;
......
arch/arc/boot/dts/nsim_700.dts
View file @ 056df578
...@@ -14,11 +14,11 @@ / { ...@@ -14,11 +14,11 @@ / {
interrupt-parent = <&core_intc>; interrupt-parent = <&core_intc>;
chosen { chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1"; bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1";
}; };
aliases { aliases {
serial0 = &arcuart0; serial0 = &uart0;
}; };
fpga { fpga {
...@@ -41,29 +41,15 @@ core_intc: interrupt-controller { ...@@ -41,29 +41,15 @@ core_intc: interrupt-controller {
#interrupt-cells = <1>; #interrupt-cells = <1>;
}; };
arcuart0: serial@c0fc1000 { uart0: serial@f0000000 {
compatible = "snps,arc-uart"; compatible = "ns16550a";
reg = <0xc0fc1000 0x100>; reg = <0xf0000000 0x2000>;
interrupts = <5>; interrupts = <24>;
clock-frequency = <80000000>; clock-frequency = <50000000>;
current-speed = <115200>; baud = <115200>;
status = "okay"; reg-shift = <2>;
}; reg-io-width = <4>;
no-loopback-test = <1>;
ethernet@c0fc2000 {
compatible = "snps,arc-emac";
reg = <0xc0fc2000 0x3c>;
interrupts = <6>;
mac-address = [ 00 11 22 33 44 55 ];
clock-frequency = <80000000>;
max-speed = <100>;
phy = <&phy0>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <1>;
};
}; };
arcpct0: pct { arcpct0: pct {
......
arch/arc/boot/dts/nsim_hs.dts deleted 100644 → 0
View file @ aedc0650
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*/
/dts-v1/;
/include/ "skeleton_hs.dtsi"
/ {
model = "snps,nsim_hs";
compatible = "snps,nsim_hs";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&core_intc>;
memory {
device_type = "memory";
/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */
0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */
};
chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
};
aliases {
serial0 = &arcuart0;
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* only perip space at end of low mem accessible
bus addr, parent bus addr, size */
ranges = <0x80000000 0x0 0x80000000 0x80000000>;
core_clk: core_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <80000000>;
};
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
arcuart0: serial@c0fc1000 {
compatible = "snps,arc-uart";
reg = <0xc0fc1000 0x100>;
interrupts = <24>;
clock-frequency = <80000000>;
current-speed = <115200>;
status = "okay";
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupts = <20>;
};
};
};
arch/arc/boot/dts/nsim_hs_idu.dts deleted 100644 → 0
View file @ aedc0650
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
*/
/dts-v1/;
/include/ "skeleton_hs_idu.dtsi"
/ {
model = "snps,nsim_hs-smp";
compatible = "snps,nsim_hs";
interrupt-parent = <&core_intc>;
chosen {
bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
};
aliases {
serial0 = &arcuart0;
};
fpga {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* child and parent address space 1:1 mapped */
ranges;
core_clk: core_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <80000000>;
};
core_intc: core-interrupt-controller {
compatible = "snps,archs-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
idu_intc: idu-interrupt-controller {
compatible = "snps,archs-idu-intc";
interrupt-controller;
interrupt-parent = <&core_intc>;
#interrupt-cells = <1>;
};
arcuart0: serial@c0fc1000 {
compatible = "snps,arc-uart";
reg = <0xc0fc1000 0x100>;
interrupt-parent = <&idu_intc>;
interrupts = <0>;
clock-frequency = <80000000>;
current-speed = <115200>;
status = "okay";
};
arcpct0: pct {
compatible = "snps,archs-pct";
#interrupt-cells = <1>;
interrupts = <20>;
};
};
};
arch/arc/configs/haps_hs_defconfig
View file @ 056df578
...@@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y ...@@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set # CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y CONFIG_NAMESPACES=y
...@@ -15,13 +16,9 @@ CONFIG_EXPERT=y ...@@ -15,13 +16,9 @@ CONFIG_EXPERT=y
CONFIG_PERF_EVENTS=y CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set # CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y CONFIG_SLAB=y
CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
CONFIG_MODULES=y CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ISA_ARCV2=y
CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set # CONFIG_COMPACTION is not set
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
...@@ -30,9 +27,6 @@ CONFIG_UNIX=y ...@@ -30,9 +27,6 @@ CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y CONFIG_NET_KEY=y
CONFIG_INET=y CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set # CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
...@@ -42,21 +36,12 @@ CONFIG_DEVTMPFS_MOUNT=y ...@@ -42,21 +36,12 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_VIRTIO_BLK=y CONFIG_VIRTIO_BLK=y
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
CONFIG_VIRTIO_NET=y CONFIG_VIRTIO_NET=y
# CONFIG_NET_VENDOR_ARC is not set # CONFIG_ETHERNET is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set # CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y # CONFIG_INPUT_KEYBOARD is not set
# CONFIG_SERIO_SERPORT is not set # CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_ARC_PS2=y # CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set # CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
...@@ -66,9 +51,6 @@ CONFIG_SERIAL_8250_DW=y ...@@ -66,9 +51,6 @@ CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set # CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set # CONFIG_USB_SUPPORT is not set
CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_MMIO=y
......
arch/arc/configs/haps_hs_smp_defconfig
View file @ 056df578
...@@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y ...@@ -4,6 +4,7 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set # CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y CONFIG_NAMESPACES=y
...@@ -16,15 +17,11 @@ CONFIG_PERF_EVENTS=y ...@@ -16,15 +17,11 @@ CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set # CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y CONFIG_SLAB=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
CONFIG_KPROBES=y CONFIG_KPROBES=y
CONFIG_MODULES=y CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set # CONFIG_COMPACTION is not set
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
...@@ -33,9 +30,6 @@ CONFIG_UNIX=y ...@@ -33,9 +30,6 @@ CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y CONFIG_NET_KEY=y
CONFIG_INET=y CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set # CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
...@@ -43,21 +37,12 @@ CONFIG_DEVTMPFS=y ...@@ -43,21 +37,12 @@ CONFIG_DEVTMPFS=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_BLK_DEV is not set # CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set # CONFIG_ETHERNET is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set # CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_PS2_TOUCHKIT=y # CONFIG_INPUT_KEYBOARD is not set
# CONFIG_SERIO_SERPORT is not set # CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_ARC_PS2=y # CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set # CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
...@@ -67,9 +52,6 @@ CONFIG_SERIAL_8250_DW=y ...@@ -67,9 +52,6 @@ CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set # CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set # CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set
......
arch/arc/configs/nsim_700_defconfig
View file @ 056df578
...@@ -4,6 +4,7 @@ CONFIG_SYSVIPC=y ...@@ -4,6 +4,7 @@ CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set # CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y CONFIG_NAMESPACES=y
...@@ -17,13 +18,10 @@ CONFIG_PERF_EVENTS=y ...@@ -17,13 +18,10 @@ CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set # CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set # CONFIG_COMPAT_BRK is not set
CONFIG_ISA_ARCOMPACT=y CONFIG_ISA_ARCOMPACT=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
CONFIG_KPROBES=y CONFIG_KPROBES=y
CONFIG_MODULES=y CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set # CONFIG_COMPACTION is not set
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
...@@ -37,15 +35,18 @@ CONFIG_DEVTMPFS=y ...@@ -37,15 +35,18 @@ CONFIG_DEVTMPFS=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_BLK_DEV is not set # CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
CONFIG_ARC_EMAC=y # CONFIG_ETHERNET is not set
CONFIG_LXT_PHY=y # CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set # CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set # CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ARC=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_ARC_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_HID is not set # CONFIG_HID is not set
......
arch/arc/configs/nsim_hs_defconfig deleted 100644 → 0
View file @ aedc0650
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ISA_ARCV2=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_BLK_DEV is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
arch/arc/configs/nsim_hs_smp_defconfig deleted 100644 → 0
View file @ aedc0650
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_BLK_DEV is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_MUST_CHECK is not set
arch/arc/include/asm/cache.h
View file @ 056df578
...@@ -25,6 +25,8 @@ ...@@ -25,6 +25,8 @@
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
#include <linux/build_bug.h>
/* Uncached access macros */ /* Uncached access macros */
#define arc_read_uncached_32(ptr) \ #define arc_read_uncached_32(ptr) \
({ \ ({ \
......
arch/arc/include/asm/entry-compact.h
View file @ 056df578
...@@ -130,7 +130,7 @@ ...@@ -130,7 +130,7 @@
* to be saved again on kernel mode stack, as part of pt_regs. * to be saved again on kernel mode stack, as part of pt_regs.
*-------------------------------------------------------------*/ *-------------------------------------------------------------*/
.macro PROLOG_FREEUP_REG reg, mem .macro PROLOG_FREEUP_REG reg, mem
#ifdef CONFIG_SMP #ifndef ARC_USE_SCRATCH_REG
sr \reg, [ARC_REG_SCRATCH_DATA0] sr \reg, [ARC_REG_SCRATCH_DATA0]
#else #else
st \reg, [\mem] st \reg, [\mem]
...@@ -138,7 +138,7 @@ ...@@ -138,7 +138,7 @@
.endm .endm
.macro PROLOG_RESTORE_REG reg, mem .macro PROLOG_RESTORE_REG reg, mem
#ifdef CONFIG_SMP #ifndef ARC_USE_SCRATCH_REG
lr \reg, [ARC_REG_SCRATCH_DATA0] lr \reg, [ARC_REG_SCRATCH_DATA0]
#else #else
ld \reg, [\mem] ld \reg, [\mem]
......
arch/arc/include/asm/jump_label.h 0 → 100644
View file @ 056df578
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_ARC_JUMP_LABEL_H
#define _ASM_ARC_JUMP_LABEL_H
#ifndef __ASSEMBLY__
#include <linux/stringify.h>
#include <linux/types.h>
#define JUMP_LABEL_NOP_SIZE 4
/*
* NOTE about '.balign 4':
*
* To make atomic update of patched instruction available we need to guarantee
* that this instruction doesn't cross L1 cache line boundary.
*
* As of today we simply align instruction which can be patched by 4 byte using
* ".balign 4" directive. In that case patched instruction is aligned with one
* 16-bit NOP_S if this is required.
* However 'align by 4' directive is much stricter than it actually required.
* It's enough that our 32-bit instruction don't cross L1 cache line boundary /
* L1 I$ fetch block boundary which can be achieved by using
* ".bundle_align_mode" assembler directive. That will save us from adding
* useless NOP_S padding in most of the cases.
*
* TODO: switch to ".bundle_align_mode" directive using whin it will be
* supported by ARC toolchain.
*/
static __always_inline bool arch_static_branch(struct static_key *key,
bool branch)
{
asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n"
"1: \n"
"nop \n"
".pushsection __jump_table, \"aw\" \n"
".word 1b, %l[l_yes], %c0 \n"
".popsection \n"
: : "i" (&((char *)key)[branch]) : : l_yes);
return false;
l_yes:
return true;
}
static __always_inline bool arch_static_branch_jump(struct static_key *key,
bool branch)
{
asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n"
"1: \n"
"b %l[l_yes] \n"
".pushsection __jump_table, \"aw\" \n"
".word 1b, %l[l_yes], %c0 \n"
".popsection \n"
: : "i" (&((char *)key)[branch]) : : l_yes);
return false;
l_yes:
return true;
}
typedef u32 jump_label_t;
struct jump_entry {
jump_label_t code;
jump_label_t target;
jump_label_t key;
};
#endif /* __ASSEMBLY__ */
#endif
arch/arc/include/asm/mmu.h
View file @ 056df578
...@@ -40,6 +40,10 @@ ...@@ -40,6 +40,10 @@
#define ARC_REG_SCRATCH_DATA0 0x46c #define ARC_REG_SCRATCH_DATA0 0x46c
#endif #endif
#if defined(CONFIG_ISA_ARCV2) || !defined(CONFIG_SMP)
#define ARC_USE_SCRATCH_REG
#endif
/* Bits in MMU PID register */ /* Bits in MMU PID register */
#define __TLB_ENABLE (1 << 31) #define __TLB_ENABLE (1 << 31)
#define __PROG_ENABLE (1 << 30) #define __PROG_ENABLE (1 << 30)
...@@ -63,6 +67,8 @@ ...@@ -63,6 +67,8 @@
#if (CONFIG_ARC_MMU_VER >= 2) #if (CONFIG_ARC_MMU_VER >= 2)
#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */ #define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */
#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */ #define TLBIVUTLB 0x6 /* explicitly inv uTLBs */
#else
#define TLBWriteNI TLBWrite /* Not present in hardware, fallback */
#endif #endif
#if (CONFIG_ARC_MMU_VER >= 4) #if (CONFIG_ARC_MMU_VER >= 4)
......
arch/arc/include/asm/mmu_context.h
View file @ 056df578
...@@ -144,7 +144,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, ...@@ -144,7 +144,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
*/ */
cpumask_set_cpu(cpu, mm_cpumask(next)); cpumask_set_cpu(cpu, mm_cpumask(next));
#ifndef CONFIG_SMP #ifdef ARC_USE_SCRATCH_REG
/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */ /* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd); write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
#endif #endif
......
arch/arc/include/asm/pgtable.h
View file @ 056df578
...@@ -350,7 +350,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, ...@@ -350,7 +350,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
* Thus use this macro only when you are certain that "current" is current * Thus use this macro only when you are certain that "current" is current
* e.g. when dealing with signal frame setup code etc * e.g. when dealing with signal frame setup code etc
*/ */
#ifndef CONFIG_SMP #ifdef ARC_USE_SCRATCH_REG
#define pgd_offset_fast(mm, addr) \ #define pgd_offset_fast(mm, addr) \
({ \ ({ \
pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0); \ pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0); \
......
arch/arc/kernel/Makefile
View file @ 056df578
...@@ -20,6 +20,7 @@ obj-$(CONFIG_ARC_EMUL_UNALIGNED) += unaligned.o ...@@ -20,6 +20,7 @@ obj-$(CONFIG_ARC_EMUL_UNALIGNED) += unaligned.o
obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o
CFLAGS_fpu.o += -mdpfp CFLAGS_fpu.o += -mdpfp
......
arch/arc/kernel/jump_label.c 0 → 100644
View file @ 056df578
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/jump_label.h>
#include "asm/cacheflush.h"
#define JUMPLABEL_ERR "ARC: jump_label: ERROR: "
/* Halt system on fatal error to make debug easier */
#define arc_jl_fatal(format...) \
({ \
pr_err(JUMPLABEL_ERR format); \
BUG(); \
})
static inline u32 arc_gen_nop(void)
{
/* 1x 32bit NOP in middle endian */
return 0x7000264a;
}
/*
* Atomic update of patched instruction is only available if this
* instruction doesn't cross L1 cache line boundary. You can read about
* the way we achieve this in arc/include/asm/jump_label.h
*/
static inline void instruction_align_assert(void *addr, int len)
{
unsigned long a = (unsigned long)addr;
if ((a >> L1_CACHE_SHIFT) != ((a + len - 1) >> L1_CACHE_SHIFT))
arc_jl_fatal("instruction (addr %px) cross L1 cache line border",
addr);
}
/*
* ARCv2 'Branch unconditionally' instruction:
* 00000ssssssssss1SSSSSSSSSSNRtttt
* s S[n:0] lower bits signed immediate (number is bitfield size)
* S S[m:n+1] upper bits signed immediate (number is bitfield size)
* t S[24:21] upper bits signed immediate (branch unconditionally far)
* N N <.d> delay slot mode
* R R Reserved
*/
static inline u32 arc_gen_branch(jump_label_t pc, jump_label_t target)
{
u32 instruction_l, instruction_r;
u32 pcl = pc & GENMASK(31, 2);
u32 u_offset = target - pcl;
u32 s, S, t;
/*
* Offset in 32-bit branch instruction must to fit into s25.
* Something is terribly broken if we get such huge offset within one
* function.
*/
if ((s32)u_offset < -16777216 || (s32)u_offset > 16777214)
arc_jl_fatal("gen branch with offset (%d) not fit in s25",
(s32)u_offset);
/*
* All instructions are aligned by 2 bytes so we should never get offset
* here which is not 2 bytes aligned.
*/
if (u_offset & 0x1)
arc_jl_fatal("gen branch with offset (%d) unaligned to 2 bytes",
(s32)u_offset);
s = (u_offset >> 1) & GENMASK(9, 0);
S = (u_offset >> 11) & GENMASK(9, 0);
t = (u_offset >> 21) & GENMASK(3, 0);
/* 00000ssssssssss1 */
instruction_l = (s << 1) | 0x1;
/* SSSSSSSSSSNRtttt */
instruction_r = (S << 6) | t;
return (instruction_r << 16) | (instruction_l & GENMASK(15, 0));
}
void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type)
{
jump_label_t *instr_addr = (jump_label_t *)entry->code;
u32 instr;
instruction_align_assert(instr_addr, JUMP_LABEL_NOP_SIZE);
if (type == JUMP_LABEL_JMP)
instr = arc_gen_branch(entry->code, entry->target);
else
instr = arc_gen_nop();
WRITE_ONCE(*instr_addr, instr);
flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE);
}
void arch_jump_label_transform_static(struct jump_entry *entry,
enum jump_label_type type)
{
/*
* We use only one NOP type (1x, 4 byte) in arch_static_branch, so
* there's no need to patch an identical NOP over the top of it here.
* The generic code calls 'arch_jump_label_transform' if the NOP needs
* to be replaced by a branch, so 'arch_jump_label_transform_static' is
* never called with type other than JUMP_LABEL_NOP.
*/
BUG_ON(type != JUMP_LABEL_NOP);
}
#ifdef CONFIG_ARC_DBG_JUMP_LABEL
#define SELFTEST_MSG "ARC: instruction generation self-test: "
struct arc_gen_branch_testdata {
jump_label_t pc;
jump_label_t target_address;
u32 expected_instr;
};
static __init int branch_gen_test(const struct arc_gen_branch_testdata *test)
{
u32 instr_got;
instr_got = arc_gen_branch(test->pc, test->target_address);
if (instr_got == test->expected_instr)
return 0;
pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n",
test->pc, test->target_address,
test->expected_instr, instr_got);
return -EFAULT;
}
/*
* Offset field in branch instruction is not continuous. Test all
* available offset field and sign combinations. Test data is generated
* from real working code.
*/
static const struct arc_gen_branch_testdata arcgenbr_test_data[] __initconst = {
{0x90007548, 0x90007514, 0xffcf07cd}, /* tiny (-52) offs */
{0x9000c9c0, 0x9000c782, 0xffcf05c3}, /* tiny (-574) offs */
{0x9000cc1c, 0x9000c782, 0xffcf0367}, /* tiny (-1178) offs */
{0x9009dce0, 0x9009d106, 0xff8f0427}, /* small (-3034) offs */
{0x9000f5de, 0x90007d30, 0xfc0f0755}, /* big (-30892) offs */
{0x900a2444, 0x90035f64, 0xc9cf0321}, /* huge (-443616) offs */
{0x90007514, 0x9000752c, 0x00000019}, /* tiny (+24) offs */
{0x9001a578, 0x9001a77a, 0x00000203}, /* tiny (+514) offs */
{0x90031ed8, 0x90032634, 0x0000075d}, /* tiny (+1884) offs */
{0x9008c7f2, 0x9008d3f0, 0x00400401}, /* small (+3072) offs */
{0x9000bb38, 0x9003b340, 0x17c00009}, /* big (+194568) offs */
{0x90008f44, 0x90578d80, 0xb7c2063d} /* huge (+5701180) offs */
};
static __init int instr_gen_test(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(arcgenbr_test_data); i++)
if (branch_gen_test(&arcgenbr_test_data[i]))
return -EFAULT;
pr_info(SELFTEST_MSG "OK\n");
return 0;
}
early_initcall(instr_gen_test);
#endif /* CONFIG_ARC_DBG_JUMP_LABEL */
arch/arc/mm/tlb.c
View file @ 056df578
...@@ -118,6 +118,33 @@ static inline void __tlb_entry_erase(void) ...@@ -118,6 +118,33 @@ static inline void __tlb_entry_erase(void)
write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
} }
static void utlb_invalidate(void)
{
#if (CONFIG_ARC_MMU_VER >= 2)
#if (CONFIG_ARC_MMU_VER == 2)
/* MMU v2 introduced the uTLB Flush command.
* There was however an obscure hardware bug, where uTLB flush would
* fail when a prior probe for J-TLB (both totally unrelated) would
* return lkup err - because the entry didn't exist in MMU.
* The Workround was to set Index reg with some valid value, prior to
* flush. This was fixed in MMU v3
*/
unsigned int idx;
/* make sure INDEX Reg is valid */
idx = read_aux_reg(ARC_REG_TLBINDEX);
/* If not write some dummy val */
if (unlikely(idx & TLB_LKUP_ERR))
write_aux_reg(ARC_REG_TLBINDEX, 0xa);
#endif
write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
#endif
}
#if (CONFIG_ARC_MMU_VER < 4) #if (CONFIG_ARC_MMU_VER < 4)
static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid) static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid)
...@@ -149,44 +176,6 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid) ...@@ -149,44 +176,6 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid)
} }
} }
/****************************************************************************
* ARC700 MMU caches recently used J-TLB entries (RAM) as uTLBs (FLOPs)
*
* New IVUTLB cmd in MMU v2 explictly invalidates the uTLB
*
* utlb_invalidate ( )
* -For v2 MMU calls Flush uTLB Cmd
* -For v1 MMU does nothing (except for Metal Fix v1 MMU)
* This is because in v1 TLBWrite itself invalidate uTLBs
***************************************************************************/
static void utlb_invalidate(void)
{
#if (CONFIG_ARC_MMU_VER >= 2)
#if (CONFIG_ARC_MMU_VER == 2)
/* MMU v2 introduced the uTLB Flush command.
* There was however an obscure hardware bug, where uTLB flush would
* fail when a prior probe for J-TLB (both totally unrelated) would
* return lkup err - because the entry didn't exist in MMU.
* The Workround was to set Index reg with some valid value, prior to
* flush. This was fixed in MMU v3 hence not needed any more
*/
unsigned int idx;
/* make sure INDEX Reg is valid */
idx = read_aux_reg(ARC_REG_TLBINDEX);
/* If not write some dummy val */
if (unlikely(idx & TLB_LKUP_ERR))
write_aux_reg(ARC_REG_TLBINDEX, 0xa);
#endif
write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
#endif
}
static void tlb_entry_insert(unsigned int pd0, pte_t pd1) static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
{ {
unsigned int idx; unsigned int idx;
...@@ -219,11 +208,6 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1) ...@@ -219,11 +208,6 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
#else /* CONFIG_ARC_MMU_VER >= 4) */ #else /* CONFIG_ARC_MMU_VER >= 4) */
static void utlb_invalidate(void)
{
/* No need since uTLB is always in sync with JTLB */
}
static void tlb_entry_erase(unsigned int vaddr_n_asid) static void tlb_entry_erase(unsigned int vaddr_n_asid)
{ {
write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid | _PAGE_PRESENT); write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid | _PAGE_PRESENT);
...@@ -267,7 +251,7 @@ noinline void local_flush_tlb_all(void) ...@@ -267,7 +251,7 @@ noinline void local_flush_tlb_all(void)
for (entry = 0; entry < num_tlb; entry++) { for (entry = 0; entry < num_tlb; entry++) {
/* write this entry to the TLB */ /* write this entry to the TLB */
write_aux_reg(ARC_REG_TLBINDEX, entry); write_aux_reg(ARC_REG_TLBINDEX, entry);
write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
} }
if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) { if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
...@@ -278,7 +262,7 @@ noinline void local_flush_tlb_all(void) ...@@ -278,7 +262,7 @@ noinline void local_flush_tlb_all(void)
for (entry = stlb_idx; entry < stlb_idx + 16; entry++) { for (entry = stlb_idx; entry < stlb_idx + 16; entry++) {
write_aux_reg(ARC_REG_TLBINDEX, entry); write_aux_reg(ARC_REG_TLBINDEX, entry);
write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
} }
} }
...@@ -355,8 +339,6 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, ...@@ -355,8 +339,6 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
} }
} }
utlb_invalidate();
local_irq_restore(flags); local_irq_restore(flags);
} }
...@@ -385,8 +367,6 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) ...@@ -385,8 +367,6 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
start += PAGE_SIZE; start += PAGE_SIZE;
} }
utlb_invalidate();
local_irq_restore(flags); local_irq_restore(flags);
} }
...@@ -407,7 +387,6 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) ...@@ -407,7 +387,6 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) { if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) {
tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu)); tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu));
utlb_invalidate();
} }
local_irq_restore(flags); local_irq_restore(flags);
...@@ -868,7 +847,7 @@ void arc_mmu_init(void) ...@@ -868,7 +847,7 @@ void arc_mmu_init(void)
write_aux_reg(ARC_REG_PID, MMU_ENABLE); write_aux_reg(ARC_REG_PID, MMU_ENABLE);
/* In smp we use this reg for interrupt 1 scratch */ /* In smp we use this reg for interrupt 1 scratch */
#ifndef CONFIG_SMP #ifdef ARC_USE_SCRATCH_REG
/* swapper_pg_dir is the pgd for the kernel, used by vmalloc */ /* swapper_pg_dir is the pgd for the kernel, used by vmalloc */
write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir); write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir);
#endif #endif
......
arch/arc/mm/tlbex.S
View file @ 056df578
...@@ -122,17 +122,27 @@ ex_saved_reg1: ...@@ -122,17 +122,27 @@ ex_saved_reg1:
#else /* ARCv2 */ #else /* ARCv2 */
.macro TLBMISS_FREEUP_REGS .macro TLBMISS_FREEUP_REGS
#ifdef CONFIG_ARC_HAS_LL64
std r0, [sp, -16]
std r2, [sp, -8]
#else
PUSH r0 PUSH r0
PUSH r1 PUSH r1
PUSH r2 PUSH r2
PUSH r3 PUSH r3
#endif
.endm .endm
.macro TLBMISS_RESTORE_REGS .macro TLBMISS_RESTORE_REGS
#ifdef CONFIG_ARC_HAS_LL64
ldd r0, [sp, -16]
ldd r2, [sp, -8]
#else
POP r3 POP r3
POP r2 POP r2
POP r1 POP r1
POP r0 POP r0
#endif
.endm .endm
#endif #endif
...@@ -193,7 +203,7 @@ ex_saved_reg1: ...@@ -193,7 +203,7 @@ ex_saved_reg1:
lr r2, [efa] lr r2, [efa]
#ifndef CONFIG_SMP #ifdef ARC_USE_SCRATCH_REG
lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd
#else #else
GET_CURR_TASK_ON_CPU r1 GET_CURR_TASK_ON_CPU r1
...@@ -282,11 +292,7 @@ ex_saved_reg1: ...@@ -282,11 +292,7 @@ ex_saved_reg1:
sr TLBGetIndex, [ARC_REG_TLBCOMMAND] sr TLBGetIndex, [ARC_REG_TLBCOMMAND]
/* Commit the Write */ /* Commit the Write */
#if (CONFIG_ARC_MMU_VER >= 2) /* introduced in v2 */
sr TLBWriteNI, [ARC_REG_TLBCOMMAND] sr TLBWriteNI, [ARC_REG_TLBCOMMAND]
#else
sr TLBWrite, [ARC_REG_TLBCOMMAND]
#endif
#else #else
sr TLBInsertEntry, [ARC_REG_TLBCOMMAND] sr TLBInsertEntry, [ARC_REG_TLBCOMMAND]
...@@ -370,9 +376,7 @@ ENTRY(EV_TLBMissD) ...@@ -370,9 +376,7 @@ ENTRY(EV_TLBMissD)
;---------------------------------------------------------------- ;----------------------------------------------------------------
; UPDATE_PTE: Let Linux VM know that page was accessed/dirty ; UPDATE_PTE: Let Linux VM know that page was accessed/dirty
lr r3, [ecr]
or r0, r0, _PAGE_ACCESSED ; Accessed bit always or r0, r0, _PAGE_ACCESSED ; Accessed bit always
btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ?
or.nz r0, r0, _PAGE_DIRTY ; if Write, set Dirty bit as well or.nz r0, r0, _PAGE_DIRTY ; if Write, set Dirty bit as well
st_s r0, [r1] ; Write back PTE st_s r0, [r1] ; Write back PTE
......
arch/arc/plat-sim/platform.c
View file @ 056df578
...@@ -21,7 +21,6 @@ static const char *simulation_compat[] __initconst = { ...@@ -21,7 +21,6 @@ static const char *simulation_compat[] __initconst = {
"snps,nsim", "snps,nsim",
"snps,nsimosci", "snps,nsimosci",
#else #else
"snps,nsim_hs",
"snps,nsimosci_hs", "snps,nsimosci_hs",
"snps,zebu_hs", "snps,zebu_hs",
#endif #endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7