V4L/DVB (13493): TeVii S470 and TBS 6920 fixes

 The new hardware design applied for this cards.
Silicon Labs C8051F300 microcontroller is used for LNB power control.
It connected to cx23885 GPIO pins:
 GPIO0 - P0.3 data
 GPIO1 - P0.2 reset
 GPIO2 - P0.1 clk
 GPIO3 - P0.0 busy
 Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner
and M88DS3000 advanced DVB-S/S2 demodulator.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/frontends/Kconfig

@@ -201,6 +201,13 @@ config DVB_SI21XX
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
+config DVB_DS3000
+	tristate "Montage Tehnology DS3000 based"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
 comment "DVB-T (terrestrial) frontends"
 	depends on DVB_CORE
 

drivers/media/dvb/frontends/Makefile

@@ -78,3 +78,4 @@ obj-$(CONFIG_DVB_STV090x) += stv090x.o
 obj-$(CONFIG_DVB_STV6110x) += stv6110x.o
 obj-$(CONFIG_DVB_ISL6423) += isl6423.o
 obj-$(CONFIG_DVB_EC100) += ec100.o
+obj-$(CONFIG_DVB_DS3000) += ds3000.o

drivers/media/dvb/frontends/ds3000.h

+/*
+    Montage Technology DS3000/TS2020 - DVBS/S2 Satellite demod/tuner driver
+    Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com>
+
+    Copyright (C) 2009 TurboSight.com
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef DS3000_H
+#define DS3000_H
+
+#include <linux/dvb/frontend.h>
+
+struct ds3000_config {
+	/* the demodulator's i2c address */
+	u8 demod_address;
+};
+
+#if defined(CONFIG_DVB_DS3000) || \
+			(defined(CONFIG_DVB_DS3000_MODULE) && defined(MODULE))
+extern struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
+					struct i2c_adapter *i2c);
+#else
+static inline
+struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
+					struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif /* CONFIG_DVB_DS3000 */
+#endif /* DS3000_H */

drivers/media/video/cx23885/Kconfig

@@ -18,7 +18,9 @@ config VIDEO_CX23885
 	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_STV6110 if !DVB_FE_CUSTOMISE
+	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_STV0900 if !DVB_FE_CUSTOMISE
+	select DVB_DS3000 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE

drivers/media/video/cx23885/Makefile

 cx23885-objs	:= cx23885-cards.o cx23885-video.o cx23885-vbi.o \
 		    cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
 		    cx23885-ioctl.o cx23885-ir.o cx23885-input.o cx23888-ir.o \
-		    netup-init.o cimax2.o netup-eeprom.o
+		    netup-init.o cimax2.o netup-eeprom.o cx23885-f300.o
 
 obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
 

drivers/media/video/cx23885/cx23885-cards.c

@@ -782,10 +782,14 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x00040004);
 		break;
 	case CX23885_BOARD_TBS_6920:
-	case CX23885_BOARD_TEVII_S470:
 		cx_write(MC417_CTL, 0x00000036);
 		cx_write(MC417_OEN, 0x00001000);
-		cx_write(MC417_RWD, 0x00001800);
+		cx_set(MC417_RWD, 0x00000002);
+		mdelay(200);
+		cx_clear(MC417_RWD, 0x00000800);
+		mdelay(200);
+		cx_set(MC417_RWD, 0x00000800);
+		mdelay(200);
 		break;
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
 		/* GPIO-0 INTA from CiMax1
@@ -1002,8 +1006,12 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
-	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_TBS_6920:
+		ts1->gen_ctrl_val  = 0x4; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_DVBWORLD_2005:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */

drivers/media/video/cx23885/cx23885-core.c

@@ -1871,6 +1871,26 @@ void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask)
 		printk(KERN_INFO "%s: Unsupported\n", dev->name);
 }
 
+u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x00000007)
+		return (cx_read(GP0_IO) >> 8) & mask & 0x7;
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Reading GPIO moving on encoder ports\n",
+				dev->name);
+		return (cx_read(MC417_RWD) & ((mask & 0x7fff8) >> 3)) << 3;
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		printk(KERN_INFO "%s: Unsupported\n", dev->name);
+
+	return 0;
+}
+
 void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
 {
 	if ((mask & 0x00000007) && asoutput)

drivers/media/video/cx23885/cx23885-dvb.c

@@ -56,6 +56,8 @@
 #include "netup-init.h"
 #include "lgdt3305.h"
 #include "atbm8830.h"
+#include "ds3000.h"
+#include "cx23885-f300.h"
 
 static unsigned int debug;
 
@@ -427,26 +429,12 @@ static struct stv6110_config netup_stv6110_tunerconfig_b = {
 	.gain = 8, /* +16 dB  - maximum gain */
 };
 
-static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct cx23885_tsport *port = fe->dvb->priv;
-	struct cx23885_dev *dev = port->dev;
-
-	if (voltage == SEC_VOLTAGE_18)
-		cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */
-	else if (voltage == SEC_VOLTAGE_13)
-		cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */
-	else
-		cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */
-	return 0;
-}
-
 static struct cx24116_config tbs_cx24116_config = {
-	.demod_address = 0x05,
+	.demod_address = 0x55,
 };
 
-static struct cx24116_config tevii_cx24116_config = {
-	.demod_address = 0x55,
+static struct ds3000_config tevii_ds3000_config = {
+	.demod_address = 0x68,
 };
 
 static struct cx24116_config dvbworld_cx24116_config = {
@@ -832,23 +820,23 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	case CX23885_BOARD_TBS_6920:
-		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus = &dev->i2c_bus[1];
 
 		fe0->dvb.frontend = dvb_attach(cx24116_attach,
-			&tbs_cx24116_config,
-			&i2c_bus->i2c_adap);
+					&tbs_cx24116_config,
+					&i2c_bus->i2c_adap);
 		if (fe0->dvb.frontend != NULL)
-			fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 
 		break;
 	case CX23885_BOARD_TEVII_S470:
 		i2c_bus = &dev->i2c_bus[1];
 
-		fe0->dvb.frontend = dvb_attach(cx24116_attach,
-			&tevii_cx24116_config,
-			&i2c_bus->i2c_adap);
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+					&tevii_ds3000_config,
+					&i2c_bus->i2c_adap);
 		if (fe0->dvb.frontend != NULL)
-			fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 
 		break;
 	case CX23885_BOARD_DVBWORLD_2005:

drivers/media/video/cx23885/cx23885-f300.c

+/*
+ * Driver for Silicon Labs C8051F300 microcontroller.
+ *
+ * It is used for LNB power control in TeVii S470,
+ * TBS 6920 PCIe DVB-S2 cards.
+ *
+ * Microcontroller connected to cx23885 GPIO pins:
+ * GPIO0 - data		- P0.3 F300
+ * GPIO1 - reset	- P0.2 F300
+ * GPIO2 - clk		- P0.1 F300
+ * GPIO3 - busy		- P0.0 F300
+ *
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@me.by>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx23885.h"
+
+#define F300_DATA	GPIO_0
+#define F300_RESET	GPIO_1
+#define F300_CLK	GPIO_2
+#define F300_BUSY	GPIO_3
+
+static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl)
+{
+	cx23885_gpio_enable(dev, line, 1);
+	if (lvl == 1)
+		cx23885_gpio_set(dev, line);
+	else
+		cx23885_gpio_clear(dev, line);
+}
+
+static u8 f300_get_line(struct cx23885_dev *dev, u32 line)
+{
+	cx23885_gpio_enable(dev, line, 0);
+
+	return cx23885_gpio_get(dev, line);
+}
+
+static void f300_send_byte(struct cx23885_dev *dev, u8 dta)
+{
+	u8 i;
+
+	for (i = 0; i < 8; i++) {
+		f300_set_line(dev, F300_CLK, 0);
+		udelay(30);
+		f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */
+		udelay(30);
+		dta <<= 1;
+		f300_set_line(dev, F300_CLK, 1);
+		udelay(30);
+	}
+}
+
+static u8 f300_get_byte(struct cx23885_dev *dev)
+{
+	u8 i, dta = 0;
+
+	for (i = 0; i < 8; i++) {
+		f300_set_line(dev, F300_CLK, 0);
+		udelay(30);
+		dta <<= 1;
+		f300_set_line(dev, F300_CLK, 1);
+		udelay(30);
+		dta |= f300_get_line(dev, F300_DATA);/* msb first */
+
+	}
+
+	return dta;
+}
+
+static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+	u8 i, temp, ret = 0;
+
+	temp = buf[0];
+	for (i = 0; i < buf[0]; i++)
+		temp += buf[i + 1];
+	temp = (~temp + 1);/* get check sum */
+	buf[1 + buf[0]] = temp;
+
+	f300_set_line(dev, F300_RESET, 1);
+	f300_set_line(dev, F300_CLK, 1);
+	udelay(30);
+	f300_set_line(dev, F300_DATA, 1);
+	msleep(1);
+
+	/* question: */
+	f300_set_line(dev, F300_RESET, 0);/* begin to send data */
+	msleep(1);
+
+	f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
+	msleep(1);
+
+	temp = buf[0];
+	temp += 2;
+	for (i = 0; i < temp; i++)
+		f300_send_byte(dev, buf[i]);
+
+	f300_set_line(dev, F300_RESET, 1);/* sent data over */
+	f300_set_line(dev, F300_DATA, 1);
+
+	/* answer: */
+	temp = 0;
+	for (i = 0; ((i < 8) & (temp == 0)); i++) {
+		msleep(1);
+		if (f300_get_line(dev, F300_BUSY) == 0)
+			temp = 1;
+	}
+
+	if (i > 7) {
+		printk(KERN_ERR "%s: timeout, the slave no response\n",
+								__func__);
+		ret = 1; /* timeout, the slave no response */
+	} else { /* the slave not busy, prepare for getting data */
+		f300_set_line(dev, F300_RESET, 0);/*ready...*/
+		msleep(1);
+		f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
+		msleep(1);
+		temp = f300_get_byte(dev);/*get the data length */
+		if (temp > 14)
+			temp = 14;
+
+		for (i = 0; i < (temp + 1); i++)
+			f300_get_byte(dev);/* get data to empty buffer */
+
+		f300_set_line(dev, F300_RESET, 1);/* received data over */
+		f300_set_line(dev, F300_DATA, 1);
+	}
+
+	return ret;
+}
+
+int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	u8 buf[16];
+
+	buf[0] = 0x05;
+	buf[1] = 0x38;/* write port */
+	buf[2] = 0x01;/* A port, lnb power */
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		buf[3] = 0x01;/* power on */
+		buf[4] = 0x02;/* B port, H/V */
+		buf[5] = 0x00;/*13V v*/
+		break;
+	case SEC_VOLTAGE_18:
+		buf[3] = 0x01;
+		buf[4] = 0x02;
+		buf[5] = 0x01;/* 18V h*/
+		break;
+	case SEC_VOLTAGE_OFF:
+		buf[3] = 0x00;/* power off */
+		buf[4] = 0x00;
+		buf[5] = 0x00;
+		break;
+	}
+
+	return f300_xfer(fe, buf);
+}

drivers/media/video/cx23885/cx23885-f300.h

+extern int f300_set_voltage(struct dvb_frontend *fe,
+				fe_sec_voltage_t voltage);

drivers/media/video/cx23885/cx23885.h

@@ -471,6 +471,7 @@ extern void cx23885_wakeup(struct cx23885_tsport *port,
 
 extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask);
 extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask);
 extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
 	int asoutput);