Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -43,6 +43,20 @@ Description:    Allows the root user to read or write directly through the
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/data64
+Date:           Jan 2020
+KernelVersion:  5.6
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the root user to read or write 64 bit data directly
+                through the device's PCI bar. Writing to this file generates a
+                write transaction while reading from the file generates a read
+                transaction. This custom interface is needed (instead of using
+                the generic Linux user-space PCI mapping) because the DDR bar
+                is very small compared to the DDR memory and only the driver can
+                move the bar before and after the transaction.
+                If the IOMMU is disabled, it also allows the root user to read
+                or write from the host a device VA of a host mapped memory
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/device
 Date:           Jan 2019
 KernelVersion:  5.1

Documentation/ABI/testing/sysfs-bus-coresight-devices-cti

+What:		/sys/bus/coresight/devices/<cti-name>/enable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Enable/Disable the CTI hardware.
+
+What:		/sys/bus/coresight/devices/<cti-name>/powered
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Indicate if the CTI hardware is powered.
+
+What:		/sys/bus/coresight/devices/<cti-name>/ctmid
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Display the associated CTM ID
+
+What:		/sys/bus/coresight/devices/<cti-name>/nr_trigger_cons
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Number of devices connected to triggers on this CTI
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/name
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Name of connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_signals
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Input trigger signals from connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_types
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Functional types for the input trigger signals
+		from connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_signals
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Output trigger signals to connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_types
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Functional types for the output trigger signals
+		to connected device <N>
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/inout_sel
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Select the index for inen and outen registers.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/inen
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write the CTIINEN register selected by inout_sel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/outen
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write the CTIOUTEN register selected by inout_sel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/gate
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write CTIGATE register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/asicctl
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Read or write ASICCTL register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/intack
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Write the INTACK register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/appset
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Set CTIAPPSET register to activate channel. Read back to
+		determine current value of register.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/appclear
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Write APPCLEAR register to deactivate channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/apppulse
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Write APPPULSE to pulse a channel active for one clock
+		cycle.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/chinstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Read current status of channel inputs.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/choutstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) read current status of channel outputs.
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/triginstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) read current status of input trigger signals
+
+What:		/sys/bus/coresight/devices/<cti-name>/regs/trigoutstatus
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) read current status of output trigger signals.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_attach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Attach a CTI input trigger to a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_detach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Detach a CTI input trigger from a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_attach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Attach a CTI output trigger to a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_detach
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Detach a CTI output trigger from a CTM channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_enable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Enable CTIGATE for single channel (W) or list enabled
+		channels through the gate (R).
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_disable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Disable CTIGATE for single channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_set
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Activate a single channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_clear
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Deactivate a single channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_pulse
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Pulse a single channel - activate for a single clock cycle.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_filtered
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) List of output triggers filtered across all connections.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/trig_filter_enable
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Enable or disable trigger output signal filtering.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_inuse
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) show channels with at least one attached trigger signal.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_free
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) show channels with no attached trigger signals.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_sel
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(RW) Write channel number to select a channel to view, read to
+		see selected channel number.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_in
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Read to see input triggers connected to selected view
+		channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_out
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(R) Read to see output triggers connected to selected view
+		channel.
+
+What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_reset
+Date:		March 2020
+KernelVersion	5.7
+Contact:	Mike Leach or Mathieu Poirier
+Description:	(W) Clear all channel / trigger programming.

Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc

@@ -40,3 +40,11 @@ Description:	(RW) Trigger window switch for the MSC's buffer, in
 		triggering a window switch for the buffer. Returns an error in any
 		other operating mode or attempts to write something other than "1".
 
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/stop_on_full
+Date:		March 2020
+KernelVersion:	5.7
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure whether trace stops when the last available window
+		becomes full (1/y/Y) or wraps around and continues until the next
+		window becomes available again (0/n/N).
+

Documentation/ABI/testing/sysfs-driver-jz4780-efuse

+What:		/sys/devices/*/<our-device>/nvmem
+Date:		December 2017
+Contact:	PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+Description:	read-only access to the efuse on the Ingenic JZ4780 SoC
+		The SoC has a one time programmable 8K efuse that is
+		split into segments. The driver supports read only.
+		The segments are
+		0x000   64 bit Random Number
+		0x008  128 bit Ingenic Chip ID
+		0x018  128 bit Customer ID
+		0x028 3520 bit Reserved
+		0x1E0    8 bit Protect Segment
+		0x1E1 2296 bit HDMI Key
+		0x300 2048 bit Security boot key
+Users:		any user space application which wants to read the Chip
+		and Customer ID

Documentation/admin-guide/dynamic-debug-howto.rst

@@ -54,6 +54,9 @@ If you make a mistake with the syntax, the write will fail thus::
 				<debugfs>/dynamic_debug/control
   -bash: echo: write error: Invalid argument
 
+Note, for systems without 'debugfs' enabled, the control file can be
+found in ``/proc/dynamic_debug/control``.
+
 Viewing Dynamic Debug Behaviour
 ===============================
 

Documentation/devicetree/bindings/arm/coresight.txt

@@ -45,6 +45,10 @@ its hardware characteristcs.
 		- Coresight Address Translation Unit (CATU)
 			"arm,coresight-catu", "arm,primecell";
 
+		- Coresight Cross Trigger Interface (CTI):
+			"arm,coresight-cti", "arm,primecell";
+			See coresight-cti.yaml for full CTI definitions.
+
 	* reg: physical base address and length of the register
 	  set(s) of the component.
 
@@ -72,6 +76,9 @@ its hardware characteristcs.
 	* reg-names: the only acceptable values are "stm-base" and
 	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
 
+* Required properties for Coresight Cross Trigger Interface (CTI)
+	See coresight-cti.yaml for full CTI definitions.
+
 * Required properties for devices that don't show up on the AMBA bus, such as
   non-configurable replicators and non-configurable funnels:
 

Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt

-ChromeOS EC USB Type-C cable and accessories detection
-
-On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
-able to detect the state of external accessories such as display adapters
-or USB devices when said accessories are attached or detached.
-
-The node for this device must be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-Required properties:
-- compatible:		Should be "google,extcon-usbc-cros-ec".
-- google,usb-port-id:	Specifies the USB port ID to use.
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-i2c";
-
-		...
-
-		extcon {
-			compatible = "google,extcon-usbc-cros-ec";
-			google,usb-port-id = <0>;
-		};
-	}

Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC USB Type-C cable and accessories detection
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
+  able to detect the state of external accessories such as display adapters
+  or USB devices when said accessories are attached or detached.
+  The node for this device must be under a cros-ec node like google,cros-ec-spi
+  or google,cros-ec-i2c.
+
+properties:
+  compatible:
+    const: google,extcon-usbc-cros-ec
+
+  google,usb-port-id:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description: the port id
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - google,usb-port-id
+
+additionalProperties: false
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            usbc_extcon0: extcon0 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <0>;
+            };
+
+            usbc_extcon1: extcon1 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <1>;
+            };
+        };
+    };

Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,bcm-voter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BCM-Voter Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+  The Bus Clock Manager (BCM) is a dedicated hardware accelerator that manages
+  shared system resources by aggregating requests from multiple Resource State
+  Coordinators (RSC). Interconnect providers are able to vote for aggregated
+  thresholds values from consumers by communicating through their respective
+  RSCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,bcm-voter
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  - |
+
+    apps_bcm_voter: bcm_voter {
+        compatible = "qcom,bcm-voter";
+    };
+
+  # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  - |
+
+    disp_bcm_voter: bcm_voter {
+        compatible = "qcom,bcm-voter";
+    };
+...

Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,osm-l3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider
+
+maintainers:
+  - Sibi Sankar <sibis@codeaurora.org>
+
+description:
+  L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM.
+  The OSM L3 interconnect provider aggregates the L3 bandwidth requests
+  from CPU/GPU and relays it to the OSM.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-osm-l3
+      - qcom,sdm845-osm-l3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: xo clock
+      - description: alternate clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #define GPLL0               165
+    #define RPMH_CXO_CLK        0
+
+    osm_l3: interconnect@17d41000 {
+      compatible = "qcom,sdm845-osm-l3";
+      reg = <0x17d41000 0x1400>;
+
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+      clock-names = "xo", "alternate";
+
+      #interconnect-cells = <1>;
+    };

Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:  Qualcomm SC7180 Network-On-Chip Interconnect
+
+maintainers:
+  - Odelu Kukatla <okukatla@codeaurora.org>
+
+description: |
+   SC7180 interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,sc7180-aggre1-noc
+      - qcom,sc7180-aggre2-noc
+      - qcom,sc7180-camnoc-virt
+      - qcom,sc7180-compute-noc
+      - qcom,sc7180-config-noc
+      - qcom,sc7180-dc-noc
+      - qcom,sc7180-gem-noc
+      - qcom,sc7180-ipa-virt
+      - qcom,sc7180-mc-virt
+      - qcom,sc7180-mmss-noc
+      - qcom,sc7180-npu-noc
+      - qcom,sc7180-qup-virt
+      - qcom,sc7180-system-noc
+
+  '#interconnect-cells':
+    const: 1
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+      config_noc: interconnect@1500000 {
+            compatible = "qcom,sc7180-config-noc";
+            reg = <0 0x01500000 0 0x28000>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      system_noc: interconnect@1620000 {
+            compatible = "qcom,sc7180-system-noc";
+            reg = <0 0x01620000 0 0x17080>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      mmss_noc: interconnect@1740000 {
+            compatible = "qcom,sc7180-mmss-noc";
+            reg = <0 0x01740000 0 0x1c100>;
+            #interconnect-cells = <1>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+      };

Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt

-Qualcomm SDM845 Network-On-Chip interconnect driver binding
------------------------------------------------------------
-
-SDM845 interconnect providers support system bandwidth requirements through
-RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
-able to communicate with the BCM through the Resource State Coordinator (RSC)
-associated with each execution environment. Provider nodes must reside within
-an RPMh device node pertaining to their RSC and each provider maps to a single
-RPMh resource.
-
-Required properties :
-- compatible : shall contain only one of the following:
-			"qcom,sdm845-rsc-hlos"
-- #interconnect-cells : should contain 1
-
-Examples:
-
-apps_rsc: rsc {
-	rsc_hlos: interconnect {
-		compatible = "qcom,sdm845-rsc-hlos";
-		#interconnect-cells = <1>;
-	};
-};
-

Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:  Qualcomm SDM845 Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+   SDM845 interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,sdm845-aggre1-noc
+      - qcom,sdm845-aggre2-noc
+      - qcom,sdm845-config-noc
+      - qcom,sdm845-dc-noc
+      - qcom,sdm845-gladiator-noc
+      - qcom,sdm845-mem-noc
+      - qcom,sdm845-mmss-noc
+      - qcom,sdm845-system-noc
+
+  '#interconnect-cells':
+    const: 1
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+      mem_noc: interconnect@1380000 {
+             compatible = "qcom,sdm845-mem-noc";
+             reg = <0 0x01380000 0 0x27200>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      mmss_noc: interconnect@1740000 {
+             compatible = "qcom,sdm845-mmss-noc";
+             reg = <0 0x01740000 0 0x1c1000>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voter-names = "apps", "disp";
+             qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
+      };

Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ EFUSE driver bindings
+
+maintainers:
+  - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4780-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # Handle for the ahb for the efuse.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4780-cgu.h>
+
+    efuse@134100d0 {
+        compatible = "ingenic,jz4780-efuse";
+        reg = <0x134100d0 0x2c>;
+
+        clocks = <&cgu JZ4780_CLK_AHB2>;
+    };
+
+...

Documentation/driver-api/soundwire/stream.rst

@@ -156,22 +156,27 @@ Below shows the SoundWire stream states and state transition diagram. ::
 	+-----------+     +------------+     +----------+     +----------+
 	| ALLOCATED +---->| CONFIGURED +---->| PREPARED +---->| ENABLED  |
 	|   STATE   |     |    STATE   |     |  STATE   |     |  STATE   |
-	+-----------+     +------------+     +----------+     +----+-----+
-	                                                           ^
-	                                                           |
-	                                                           |
-	                                                           v
-	         +----------+           +------------+        +----+-----+
+	+-----------+     +------------+     +---+--+---+     +----+-----+
+	                                         ^  ^              ^
+				                 |  |              |
+				               __|  |___________   |
+				              |                 |  |
+	                                      v                 |  v
+	         +----------+           +-----+------+        +-+--+-----+
 	         | RELEASED |<----------+ DEPREPARED |<-------+ DISABLED |
 	         |  STATE   |           |   STATE    |        |  STATE   |
 	         +----------+           +------------+        +----------+
 
-NOTE: State transition between prepare and deprepare is supported in Spec
-but not in the software (subsystem)
+NOTE: State transitions between ``SDW_STREAM_ENABLED`` and
+``SDW_STREAM_DISABLED`` are only relevant when then INFO_PAUSE flag is
+supported at the ALSA/ASoC level. Likewise the transition between
+``SDW_DISABLED_STATE`` and ``SDW_PREPARED_STATE`` depends on the
+INFO_RESUME flag.
 
-NOTE2: Stream state transition checks need to be handled by caller
-framework, for example ALSA/ASoC. No checks for stream transition exist in
-SoundWire subsystem.
+NOTE2: The framework implements basic state transition checks, but
+does not e.g. check if a transition from DISABLED to ENABLED is valid
+on a specific platform. Such tests need to be added at the ALSA/ASoC
+level.
 
 Stream State Operations
 -----------------------
@@ -246,6 +251,9 @@ SDW_STREAM_PREPARED
 
 Prepare state of stream. Operations performed before entering in this state:
 
+  (0) Steps 1 and 2 are omitted in the case of a resume operation,
+      where the bus bandwidth is known.
+
   (1) Bus parameters such as bandwidth, frame shape, clock frequency,
       are computed based on current stream as well as already active
       stream(s) on Bus. Re-computation is required to accommodate current
@@ -270,9 +278,11 @@ Prepare state of stream. Operations performed before entering in this state:
 After all above operations are successful, stream state is set to
 ``SDW_STREAM_PREPARED``.
 
-Bus implements below API for PREPARE state which needs to be called once per
-stream. From ASoC DPCM framework, this stream state is linked to
-.prepare() operation.
+Bus implements below API for PREPARE state which needs to be called
+once per stream. From ASoC DPCM framework, this stream state is linked
+to .prepare() operation. Since the .trigger() operations may not
+follow the .prepare(), a direct transition from
+``SDW_STREAM_PREPARED`` to ``SDW_STREAM_DEPREPARED`` is allowed.
 
 .. code-block:: c
 
@@ -332,6 +342,14 @@ Bus implements below API for DISABLED state which needs to be called once
 per stream. From ASoC DPCM framework, this stream state is linked to
 .trigger() stop operation.
 
+When the INFO_PAUSE flag is supported, a direct transition to
+``SDW_STREAM_ENABLED`` is allowed.
+
+For resume operations where ASoC will use the .prepare() callback, the
+stream can transition from ``SDW_STREAM_DISABLED`` to
+``SDW_STREAM_PREPARED``, with all required settings restored but
+without updating the bandwidth and bit allocation.
+
 .. code-block:: c
 
   int sdw_disable_stream(struct sdw_stream_runtime * stream);
@@ -353,9 +371,18 @@ state:
 After all above operations are successful, stream state is set to
 ``SDW_STREAM_DEPREPARED``.
 
-Bus implements below API for DEPREPARED state which needs to be called once
-per stream. From ASoC DPCM framework, this stream state is linked to
-.trigger() stop operation.
+Bus implements below API for DEPREPARED state which needs to be called
+once per stream. ALSA/ASoC do not have a concept of 'deprepare', and
+the mapping from this stream state to ALSA/ASoC operation may be
+implementation specific.
+
+When the INFO_PAUSE flag is supported, the stream state is linked to
+the .hw_free() operation - the stream is not deprepared on a
+TRIGGER_STOP.
+
+Other implementations may transition to the ``SDW_STREAM_DEPREPARED``
+state on TRIGGER_STOP, should they require a transition through the
+``SDW_STREAM_PREPARED`` state.
 
 .. code-block:: c
 

Documentation/index.rst

@@ -134,6 +134,7 @@ needed).
    scsi/index
    misc-devices/index
    scheduler/index
+   mhi/index
 
 Architecture-agnostic documentation
 -----------------------------------

Documentation/mhi/index.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+===
+MHI
+===
+
+.. toctree::
+   :maxdepth: 1
+
+   mhi
+   topology
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/mhi/mhi.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+MHI (Modem Host Interface)
+==========================
+
+This document provides information about the MHI protocol.
+
+Overview
+========
+
+MHI is a protocol developed by Qualcomm Innovation Center, Inc. It is used
+by the host processors to control and communicate with modem devices over high
+speed peripheral buses or shared memory. Even though MHI can be easily adapted
+to any peripheral buses, it is primarily used with PCIe based devices. MHI
+provides logical channels over the physical buses and allows transporting the
+modem protocols, such as IP data packets, modem control messages, and
+diagnostics over at least one of those logical channels. Also, the MHI
+protocol provides data acknowledgment feature and manages the power state of the
+modems via one or more logical channels.
+
+MHI Internals
+=============
+
+MMIO
+----
+
+MMIO (Memory mapped IO) consists of a set of registers in the device hardware,
+which are mapped to the host memory space by the peripheral buses like PCIe.
+Following are the major components of MMIO register space:
+
+MHI control registers: Access to MHI configurations registers
+
+MHI BHI registers: BHI (Boot Host Interface) registers are used by the host
+for downloading the firmware to the device before MHI initialization.
+
+Channel Doorbell array: Channel Doorbell (DB) registers used by the host to
+notify the device when there is new work to do.
+
+Event Doorbell array: Associated with event context array, the Event Doorbell
+(DB) registers are used by the host to notify the device when new events are
+available.
+
+Debug registers: A set of registers and counters used by the device to expose
+debugging information like performance, functional, and stability to the host.
+
+Data structures
+---------------
+
+All data structures used by MHI are in the host system memory. Using the
+physical interface, the device accesses those data structures. MHI data
+structures and data buffers in the host system memory regions are mapped for
+the device.
+
+Channel context array: All channel configurations are organized in channel
+context data array.
+
+Transfer rings: Used by the host to schedule work items for a channel. The
+transfer rings are organized as a circular queue of Transfer Descriptors (TD).
+
+Event context array: All event configurations are organized in the event context
+data array.
+
+Event rings: Used by the device to send completion and state transition messages
+to the host
+
+Command context array: All command configurations are organized in command
+context data array.
+
+Command rings: Used by the host to send MHI commands to the device. The command
+rings are organized as a circular queue of Command Descriptors (CD).
+
+Channels
+--------
+
+MHI channels are logical, unidirectional data pipes between a host and a device.
+The concept of channels in MHI is similar to endpoints in USB. MHI supports up
+to 256 channels. However, specific device implementations may support less than
+the maximum number of channels allowed.
+
+Two unidirectional channels with their associated transfer rings form a
+bidirectional data pipe, which can be used by the upper-layer protocols to
+transport application data packets (such as IP packets, modem control messages,
+diagnostics messages, and so on). Each channel is associated with a single
+transfer ring.
+
+Transfer rings
+--------------
+
+Transfers between the host and device are organized by channels and defined by
+Transfer Descriptors (TD). TDs are managed through transfer rings, which are
+defined for each channel between the device and host and reside in the host
+memory. TDs consist of one or more ring elements (or transfer blocks)::
+
+        [Read Pointer (RP)] ----------->[Ring Element] } TD
+        [Write Pointer (WP)]-           [Ring Element]
+                             -          [Ring Element]
+                              --------->[Ring Element]
+                                        [Ring Element]
+
+Below is the basic usage of transfer rings:
+
+* Host allocates memory for transfer ring.
+* Host sets the base pointer, read pointer, and write pointer in corresponding
+  channel context.
+* Ring is considered empty when RP == WP.
+* Ring is considered full when WP + 1 == RP.
+* RP indicates the next element to be serviced by the device.
+* When the host has a new buffer to send, it updates the ring element with
+  buffer information, increments the WP to the next element and rings the
+  associated channel DB.
+
+Event rings
+-----------
+
+Events from the device to host are organized in event rings and defined by Event
+Descriptors (ED). Event rings are used by the device to report events such as
+data transfer completion status, command completion status, and state changes
+to the host. Event rings are the array of EDs that resides in the host
+memory. EDs consist of one or more ring elements (or transfer blocks)::
+
+        [Read Pointer (RP)] ----------->[Ring Element] } ED
+        [Write Pointer (WP)]-           [Ring Element]
+                             -          [Ring Element]
+                              --------->[Ring Element]
+                                        [Ring Element]
+
+Below is the basic usage of event rings:
+
+* Host allocates memory for event ring.
+* Host sets the base pointer, read pointer, and write pointer in corresponding
+  channel context.
+* Both host and device has a local copy of RP, WP.
+* Ring is considered empty (no events to service) when WP + 1 == RP.
+* Ring is considered full of events when RP == WP.
+* When there is a new event the device needs to send, the device updates ED
+  pointed by RP, increments the RP to the next element and triggers the
+  interrupt.
+
+Ring Element
+------------
+
+A Ring Element is a data structure used to transfer a single block
+of data between the host and the device. Transfer ring element types contain a
+single buffer pointer, the size of the buffer, and additional control
+information. Other ring element types may only contain control and status
+information. For single buffer operations, a ring descriptor is composed of a
+single element. For large multi-buffer operations (such as scatter and gather),
+elements can be chained to form a longer descriptor.
+
+MHI Operations
+==============
+
+MHI States
+----------
+
+MHI_STATE_RESET
+~~~~~~~~~~~~~~~
+MHI is in reset state after power-up or hardware reset. The host is not allowed
+to access device MMIO register space.
+
+MHI_STATE_READY
+~~~~~~~~~~~~~~~
+MHI is ready for initialization. The host can start MHI initialization by
+programming MMIO registers.
+
+MHI_STATE_M0
+~~~~~~~~~~~~
+MHI is running and operational in the device. The host can start channels by
+issuing channel start command.
+
+MHI_STATE_M1
+~~~~~~~~~~~~
+MHI operation is suspended by the device. This state is entered when the
+device detects inactivity at the physical interface within a preset time.
+
+MHI_STATE_M2
+~~~~~~~~~~~~
+MHI is in low power state. MHI operation is suspended and the device may
+enter lower power mode.
+
+MHI_STATE_M3
+~~~~~~~~~~~~
+MHI operation stopped by the host. This state is entered when the host suspends
+MHI operation.
+
+MHI Initialization
+------------------
+
+After system boots, the device is enumerated over the physical interface.
+In the case of PCIe, the device is enumerated and assigned BAR-0 for
+the device's MMIO register space. To initialize the MHI in a device,
+the host performs the following operations:
+
+* Allocates the MHI context for event, channel and command arrays.
+* Initializes the context array, and prepares interrupts.
+* Waits until the device enters READY state.
+* Programs MHI MMIO registers and sets device into MHI_M0 state.
+* Waits for the device to enter M0 state.
+
+MHI Data Transfer
+-----------------
+
+MHI data transfer is initiated by the host to transfer data to the device.
+Following are the sequence of operations performed by the host to transfer
+data to device:
+
+* Host prepares TD with buffer information.
+* Host increments the WP of the corresponding channel transfer ring.
+* Host rings the channel DB register.
+* Device wakes up to process the TD.
+* Device generates a completion event for the processed TD by updating ED.
+* Device increments the RP of the corresponding event ring.
+* Device triggers IRQ to wake up the host.
+* Host wakes up and checks the event ring for completion event.
+* Host updates the WP of the corresponding event ring to indicate that the
+  data transfer has been completed successfully.
+

Documentation/mhi/topology.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+============
+MHI Topology
+============
+
+This document provides information about the MHI topology modeling and
+representation in the kernel.
+
+MHI Controller
+--------------
+
+MHI controller driver manages the interaction with the MHI client devices
+such as the external modems and WiFi chipsets. It is also the MHI bus master
+which is in charge of managing the physical link between the host and device.
+It is however not involved in the actual data transfer as the data transfer
+is taken care by the physical bus such as PCIe. Each controller driver exposes
+channels and events based on the client device type.
+
+Below are the roles of the MHI controller driver:
+
+* Turns on the physical bus and establishes the link to the device
+* Configures IRQs, IOMMU, and IOMEM
+* Allocates struct mhi_controller and registers with the MHI bus framework
+  with channel and event configurations using mhi_register_controller.
+* Initiates power on and shutdown sequence
+* Initiates suspend and resume power management operations of the device.
+
+MHI Device
+----------
+
+MHI device is the logical device which binds to a maximum of two MHI channels
+for bi-directional communication. Once MHI is in powered on state, the MHI
+core will create MHI devices based on the channel configuration exposed
+by the controller. There can be a single MHI device for each channel or for a
+couple of channels.
+
+Each supported device is enumerated in::
+
+        /sys/bus/mhi/devices/
+
+MHI Driver
+----------
+
+MHI driver is the client driver which binds to one or more MHI devices. The MHI
+driver sends and receives the upper-layer protocol packets like IP packets,
+modem control messages, and diagnostics messages over MHI. The MHI core will
+bind the MHI devices to the MHI driver.
+
+Each supported driver is enumerated in::
+
+        /sys/bus/mhi/drivers/
+
+Below are the roles of the MHI driver:
+
+* Registers the driver with the MHI bus framework using mhi_driver_register.
+* Prepares the device for transfer by calling mhi_prepare_for_transfer.
+* Initiates data transfer by calling mhi_queue_transfer.
+* Once the data transfer is finished, calls mhi_unprepare_from_transfer to
+  end data transfer.

Documentation/process/embargoed-hardware-issues.rst

@@ -246,7 +246,8 @@ an involved disclosed party. The current ambassadors list:
   ============= ========================================================
   ARM           Grant Likely <grant.likely@arm.com>
   AMD		Tom Lendacky <tom.lendacky@amd.com>
-  IBM
+  IBM Z         Christian Borntraeger <borntraeger@de.ibm.com>
+  IBM Power     Anton Blanchard <anton@linux.ibm.com>
   Intel		Tony Luck <tony.luck@intel.com>
   Qualcomm	Trilok Soni <tsoni@codeaurora.org>
 

Documentation/trace/coresight/coresight-ect.rst

+.. SPDX-License-Identifier: GPL-2.0
+=============================================
+CoreSight Embedded Cross Trigger (CTI & CTM).
+=============================================
+
+    :Author:   Mike Leach <mike.leach@linaro.org>
+    :Date:     November 2019
+
+Hardware Description
+--------------------
+
+The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes
+individual input and output hardware signals known as triggers to and from
+devices and interconnects them via the Cross Trigger Matrix (CTM) to other
+devices via numbered channels, in order to propagate events between devices.
+
+e.g.::
+
+ 0000000  in_trigs  :::::::
+ 0 C   0----------->:     :             +======>(other CTI channel IO)
+ 0  P  0<-----------:     :             v
+ 0   U 0  out_trigs :     : Channels  *****      :::::::
+ 0000000            : CTI :<=========>*CTM*<====>: CTI :---+
+ #######  in_trigs  :     : (id 0-3)  *****      :::::::   v
+ # ETM #----------->:     :                         ^   #######
+ #     #<-----------:     :                         +---# ETR #
+ ####### out_trigs  :::::::                             #######
+
+The CTI driver enables the programming of the CTI to attach triggers to
+channels. When an input trigger becomes active, the attached channel will
+become active. Any output trigger attached to that channel will also
+become active. The active channel is propagated to other CTIs via the CTM,
+activating connected output triggers there, unless filtered by the CTI
+channel gate.
+
+It is also possible to activate a channel using system software directly
+programming registers in the CTI.
+
+The CTIs are registered by the system to be associated with CPUs and/or other
+CoreSight devices on the trace data path. When these devices are enabled the
+attached CTIs will also be enabled. By default/on power up the CTIs have
+no programmed trigger/channel attachments, so will not affect the system
+until explicitly programmed.
+
+The hardware trigger connections between CTIs and devices is implementation
+defined, unless the CPU/ETM combination is a v8 architecture, in which case
+the connections have an architecturally defined standard layout.
+
+The hardware trigger signals can also be connected to non-CoreSight devices
+(e.g. UART), or be propagated off chip as hardware IO lines.
+
+All the CTI devices are associated with a CTM. On many systems there will be a
+single effective CTM (one CTM, or multiple CTMs all interconnected), but it is
+possible that systems can have nets of CTIs+CTM that are not interconnected by
+a CTM to each other. On these systems a CTM index is declared to associate
+CTI devices that are interconnected via a given CTM.
+
+Sysfs files and directories
+---------------------------
+
+The CTI devices appear on the existing CoreSight bus alongside the other
+CoreSight devices::
+
+    >$ ls /sys/bus/coresight/devices
+     cti_cpu0  cti_cpu2  cti_sys0  etm0  etm2  funnel0  replicator0  tmc_etr0
+     cti_cpu1  cti_cpu3  cti_sys1  etm1  etm3  funnel1  tmc_etf0     tpiu0
+
+The ``cti_cpu<N>`` named CTIs are associated with a CPU, and any ETM used by
+that core. The ``cti_sys<N>`` CTIs are general system infrastructure CTIs that
+can be associated with other CoreSight devices, or other system hardware
+capable of generating or using trigger signals.::
+
+  >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0
+  channels  ctmid  enable  nr_trigger_cons mgmt  power powered  regs
+  subsystem triggers0 triggers1  uevent
+
+*Key file items are:-*
+   * ``enable``: enables/disables the CTI. Read to determine current state.
+     If this shows as enabled (1), but ``powered`` shows unpowered (0), then
+     the enable indicates a request to enabled when the device is powered.
+   * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM
+     clusters that are not interconnected.
+   * ``nr_trigger_cons`` : total connections - triggers<N> directories.
+   * ``powered`` : Read to determine if the CTI is currently powered.
+
+*Sub-directories:-*
+   * ``triggers<N>``: contains list of triggers for an individual connection.
+   * ``channels``: Contains the channel API - CTI main programming interface.
+   * ``regs``: Gives access to the raw programmable CTI regs.
+   * ``mgmt``: the standard CoreSight management registers.
+
+
+triggers<N> directories
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Individual trigger connection information. This describes trigger signals for
+CoreSight and non-CoreSight connections.
+
+Each triggers directory has a set of parameters describing the triggers for
+the connection.
+
+   * ``name`` : name of connection
+   * ``in_signals`` : input trigger signal indexes used in this connection.
+   * ``in_types`` : functional types for in signals.
+   * ``out_signals`` : output trigger signals for this connection.
+   * ``out_types`` : functional types for out signals.
+
+e.g::
+
+    >$ ls ./cti_cpu0/triggers0/
+    in_signals  in_types  name  out_signals  out_types
+    >$ cat ./cti_cpu0/triggers0/name
+    cpu0
+    >$ cat ./cti_cpu0/triggers0/out_signals
+    0-2
+    >$ cat ./cti_cpu0/triggers0/out_types
+    pe_edbgreq pe_dbgrestart pe_ctiirq
+    >$ cat ./cti_cpu0/triggers0/in_signals
+    0-1
+    >$ cat ./cti_cpu0/triggers0/in_types
+    pe_dbgtrigger pe_pmuirq
+
+If a connection has zero signals in either the 'in' or 'out' triggers then
+those parameters will be omitted.
+
+Channels API Directory
+~~~~~~~~~~~~~~~~~~~~~~
+
+This provides an easy way to attach triggers to channels, without needing
+the multiple register operations that are required if manipulating the
+'regs' sub-directory elements directly.
+
+A number of files provide this API::
+
+   >$ ls ./cti_sys0/channels/
+   chan_clear         chan_inuse      chan_xtrigs_out     trigin_attach
+   chan_free          chan_pulse      chan_xtrigs_reset   trigin_detach
+   chan_gate_disable  chan_set        chan_xtrigs_sel     trigout_attach
+   chan_gate_enable   chan_xtrigs_in  trig_filter_enable  trigout_detach
+   trigout_filtered
+
+Most access to these elements take the form::
+
+  echo <chan> [<trigger>] > /<device_path>/<operation>
+
+where the optional <trigger> is only needed for trigXX_attach | detach
+operations.
+
+e.g.::
+
+   >$ echo 0 1 > ./cti_sys0/channels/trigout_attach
+   >$ echo 0 > ./cti_sys0/channels/chan_set
+
+Attaches trigout(1) to channel(0), then activates channel(0) generating a
+set state on cti_sys0.trigout(1)
+
+
+*API operations*
+
+   * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal.
+   * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal.
+   * ``chan_set``: Set the channel - the set state will be propagated around
+     the CTM to other connected devices.
+   * ``chan_clear``: Clear the channel.
+   * ``chan_pulse``: Set the channel for a single CoreSight clock cycle.
+   * ``chan_gate_enable``: Write operation sets the CTI gate to propagate
+     (enable) the channel to other devices. This operation takes a channel
+     number. CTI gate is enabled for all channels by default at power up. Read
+     to list the currently enabled channels on the gate.
+   * ``chan_gate_disable``: Write channel number to disable gate for that
+     channel.
+   * ``chan_inuse``: Show the current channels attached to any signal
+   * ``chan_free``: Show channels with no attached signals.
+   * ``chan_xtrigs_sel``: write a channel number to select a channel to view,
+     read to show the selected channel number.
+   * ``chan_xtrigs_in``: Read to show the input triggers attached to
+     the selected view channel.
+   * ``chan_xtrigs_out``:Read to show the output triggers attached to
+     the selected view channel.
+   * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially
+     dangerous output signals to be set.
+   * ``trigout_filtered``: Trigger out signals that are prevented from being
+     set if filtering ``trig_filter_enable`` is enabled. One use is to prevent
+     accidental ``EDBGREQ`` signals stopping a core.
+   * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming.
+     Resets device hardware to default state.
+
+
+The example below attaches input trigger index 1 to channel 2, and output
+trigger index 6 to the same channel. It then examines the state of the
+channel / trigger connections using the appropriate sysfs attributes.
+
+The settings mean that if either input trigger 1, or channel 2 go active then
+trigger out 6 will go active. We then enable the CTI, and use the software
+channel control to activate channel 2. We see the active channel on the
+``choutstatus`` register and the active signal on the ``trigoutstatus``
+register. Finally clearing the channel removes this.
+
+e.g.::
+
+   .../cti_sys0/channels# echo 2 1 > trigin_attach
+   .../cti_sys0/channels# echo 2 6 > trigout_attach
+   .../cti_sys0/channels# cat chan_free
+   0-1,3
+   .../cti_sys0/channels# cat chan_inuse
+   2
+   .../cti_sys0/channels# echo 2 > chan_xtrigs_sel
+   .../cti_sys0/channels# cat chan_xtrigs_trigin
+   1
+   .../cti_sys0/channels# cat chan_xtrigs_trigout
+   6
+   .../cti_sys0/# echo 1 > enable
+   .../cti_sys0/channels# echo 2 > chan_set
+   .../cti_sys0/channels# cat ../regs/choutstatus
+   0x4
+   .../cti_sys0/channels# cat ../regs/trigoutstatus
+   0x40
+   .../cti_sys0/channels# echo 2 > chan_clear
+   .../cti_sys0/channels# cat ../regs/trigoutstatus
+   0x0
+   .../cti_sys0/channels# cat ../regs/choutstatus
+   0x0

Documentation/trace/coresight/coresight.rst

@@ -491,8 +491,21 @@ interface provided for that purpose by the generic STM API::
 
 Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_.
 
+The CTI & CTM Modules
+---------------------
+
+The CTI (Cross Trigger Interface) provides a set of trigger signals between
+individual CTIs and components, and can propagate these between all CTIs via
+channels on the CTM (Cross Trigger Matrix).
+
+A separate documentation file is provided to explain the use of these devices.
+(:doc:`coresight-ect`) [#fourth]_.
+
+
 .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
 
 .. [#second] Documentation/trace/stm.rst
 
 .. [#third] https://github.com/Linaro/perf-opencsd
+
+.. [#fourth] Documentation/trace/coresight/coresight-ect.rst

MAINTAINERS

@@ -1693,12 +1693,15 @@ F:	arch/arm/mach-ep93xx/micro9.c
 ARM/CORESIGHT FRAMEWORK AND DRIVERS
 M:	Mathieu Poirier <mathieu.poirier@linaro.org>
 R:	Suzuki K Poulose <suzuki.poulose@arm.com>
+R:	Mike Leach <mike.leach@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/hwtracing/coresight/*
+F:	include/dt-bindings/arm/coresight-cti-dt.h
 F:	Documentation/trace/coresight/*
 F:	Documentation/devicetree/bindings/arm/coresight.txt
 F:	Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+F:	Documentation/devicetree/bindings/arm/coresight-cti.yaml
 F:	Documentation/ABI/testing/sysfs-bus-coresight-devices-*
 F:	tools/perf/arch/arm/util/pmu.c
 F:	tools/perf/arch/arm/util/auxtrace.c
@@ -10993,6 +10996,16 @@ M:	Vladimir Vid <vladimir.vid@sartura.hr>
 S:	Maintained
 F:	arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
 
+MHI BUS
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Hemant Kumar <hemantk@codeaurora.org>
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git
+F:	Documentation/mhi/
+F:	drivers/bus/mhi/
+F:	include/linux/mhi.h
+
 MICROBLAZE ARCHITECTURE
 M:	Michal Simek <monstr@monstr.eu>
 W:	http://www.monstr.eu/fdt/

arch/alpha/configs/defconfig

@@ -52,7 +52,8 @@ CONFIG_NET_PCI=y
 CONFIG_YELLOWFIN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_ISO9660_FS=y

arch/arm/include/asm/nwflash.h

@@ -2,7 +2,6 @@
 #ifndef _FLASH_H
 #define _FLASH_H
 
-#define FLASH_MINOR		 160	/* MAJOR is 10 - miscdevice */
 #define CMD_WRITE_DISABLE	 0
 #define CMD_WRITE_ENABLE	 0x28
 #define CMD_WRITE_BASE64K_ENABLE 0x47

arch/ia64/configs/bigsur_defconfig

@@ -57,7 +57,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_AGP=m

arch/ia64/configs/generic_defconfig

@@ -94,7 +94,8 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 CONFIG_AGP=m

arch/ia64/configs/gensparse_defconfig

@@ -82,7 +82,8 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 CONFIG_AGP=m

arch/ia64/configs/tiger_defconfig

@@ -86,7 +86,8 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 CONFIG_AGP=m

arch/ia64/configs/zx1_defconfig

@@ -68,7 +68,8 @@ CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_AGP=y
 CONFIG_AGP_HP_ZX1=y

arch/um/drivers/random.c

@@ -23,8 +23,6 @@
 #define RNG_VERSION "1.0.0"
 #define RNG_MODULE_NAME "hw_random"
 
-#define RNG_MISCDEV_MINOR		183 /* official */
-
 /* Changed at init time, in the non-modular case, and at module load
  * time, in the module case.  Presumably, the module subsystem
  * protects against a module being loaded twice at the same time.
@@ -104,7 +102,7 @@ static const struct file_operations rng_chrdev_ops = {
 
 /* rng_init shouldn't be called more than once at boot time */
 static struct miscdevice rng_miscdev = {
-	RNG_MISCDEV_MINOR,
+	HWRNG_MINOR,
 	RNG_MODULE_NAME,
 	&rng_chrdev_ops,
 };

drivers/android/binderfs.c

@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/mount.h>
-#include <linux/parser.h>
+#include <linux/fs_parser.h>
 #include <linux/radix-tree.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
@@ -48,26 +48,30 @@ static dev_t binderfs_dev;
 static DEFINE_MUTEX(binderfs_minors_mutex);
 static DEFINE_IDA(binderfs_minors);
 
-enum {
+enum binderfs_param {
 	Opt_max,
 	Opt_stats_mode,
-	Opt_err
 };
 
 enum binderfs_stats_mode {
-	STATS_NONE,
-	STATS_GLOBAL,
+	binderfs_stats_mode_unset,
+	binderfs_stats_mode_global,
 };
 
-static const match_table_t tokens = {
-	{ Opt_max, "max=%d" },
-	{ Opt_stats_mode, "stats=%s" },
-	{ Opt_err, NULL     }
+static const struct constant_table binderfs_param_stats[] = {
+	{ "global", binderfs_stats_mode_global },
+	{}
 };
 
-static inline struct binderfs_info *BINDERFS_I(const struct inode *inode)
+const struct fs_parameter_spec binderfs_fs_parameters[] = {
+	fsparam_u32("max",	Opt_max),
+	fsparam_enum("stats",	Opt_stats_mode, binderfs_param_stats),
+	{}
+};
+
+static inline struct binderfs_info *BINDERFS_SB(const struct super_block *sb)
 {
-	return inode->i_sb->s_fs_info;
+	return sb->s_fs_info;
 }
 
 bool is_binderfs_device(const struct inode *inode)
@@ -246,7 +250,7 @@ static long binder_ctl_ioctl(struct file *file, unsigned int cmd,
 static void binderfs_evict_inode(struct inode *inode)
 {
 	struct binder_device *device = inode->i_private;
-	struct binderfs_info *info = BINDERFS_I(inode);
+	struct binderfs_info *info = BINDERFS_SB(inode->i_sb);
 
 	clear_inode(inode);
 
@@ -264,97 +268,84 @@ static void binderfs_evict_inode(struct inode *inode)
 	}
 }
 
-/**
- * binderfs_parse_mount_opts - parse binderfs mount options
- * @data: options to set (can be NULL in which case defaults are used)
- */
-static int binderfs_parse_mount_opts(char *data,
-				     struct binderfs_mount_opts *opts)
+static int binderfs_fs_context_parse_param(struct fs_context *fc,
+					   struct fs_parameter *param)
 {
-	char *p, *stats;
-	opts->max = BINDERFS_MAX_MINOR;
-	opts->stats_mode = STATS_NONE;
-
-	while ((p = strsep(&data, ",")) != NULL) {
-		substring_t args[MAX_OPT_ARGS];
-		int token;
-		int max_devices;
-
-		if (!*p)
-			continue;
-
-		token = match_token(p, tokens, args);
-		switch (token) {
-		case Opt_max:
-			if (match_int(&args[0], &max_devices) ||
-			    (max_devices < 0 ||
-			     (max_devices > BINDERFS_MAX_MINOR)))
-				return -EINVAL;
-
-			opts->max = max_devices;
-			break;
-		case Opt_stats_mode:
-			if (!capable(CAP_SYS_ADMIN))
-				return -EINVAL;
+	int opt;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
+	struct fs_parse_result result;
 
-			stats = match_strdup(&args[0]);
-			if (!stats)
-				return -ENOMEM;
+	opt = fs_parse(fc, binderfs_fs_parameters, param, &result);
+	if (opt < 0)
+		return opt;
 
-			if (strcmp(stats, "global") != 0) {
-				kfree(stats);
-				return -EINVAL;
-			}
+	switch (opt) {
+	case Opt_max:
+		if (result.uint_32 > BINDERFS_MAX_MINOR)
+			return invalfc(fc, "Bad value for '%s'", param->key);
 
-			opts->stats_mode = STATS_GLOBAL;
-			kfree(stats);
-			break;
-		default:
-			pr_err("Invalid mount options\n");
-			return -EINVAL;
-		}
+		ctx->max = result.uint_32;
+		break;
+	case Opt_stats_mode:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		ctx->stats_mode = result.uint_32;
+		break;
+	default:
+		return invalfc(fc, "Unsupported parameter '%s'", param->key);
 	}
 
 	return 0;
 }
 
-static int binderfs_remount(struct super_block *sb, int *flags, char *data)
+static int binderfs_fs_context_reconfigure(struct fs_context *fc)
 {
-	int prev_stats_mode, ret;
-	struct binderfs_info *info = sb->s_fs_info;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
+	struct binderfs_info *info = BINDERFS_SB(fc->root->d_sb);
 
-	prev_stats_mode = info->mount_opts.stats_mode;
-	ret = binderfs_parse_mount_opts(data, &info->mount_opts);
-	if (ret)
-		return ret;
-
-	if (prev_stats_mode != info->mount_opts.stats_mode) {
-		pr_err("Binderfs stats mode cannot be changed during a remount\n");
-		info->mount_opts.stats_mode = prev_stats_mode;
-		return -EINVAL;
-	}
+	if (info->mount_opts.stats_mode != ctx->stats_mode)
+		return invalfc(fc, "Binderfs stats mode cannot be changed during a remount");
 
+	info->mount_opts.stats_mode = ctx->stats_mode;
+	info->mount_opts.max = ctx->max;
 	return 0;
 }
 
-static int binderfs_show_mount_opts(struct seq_file *seq, struct dentry *root)
+static int binderfs_show_options(struct seq_file *seq, struct dentry *root)
 {
-	struct binderfs_info *info;
+	struct binderfs_info *info = BINDERFS_SB(root->d_sb);
 
-	info = root->d_sb->s_fs_info;
 	if (info->mount_opts.max <= BINDERFS_MAX_MINOR)
 		seq_printf(seq, ",max=%d", info->mount_opts.max);
-	if (info->mount_opts.stats_mode == STATS_GLOBAL)
+
+	switch (info->mount_opts.stats_mode) {
+	case binderfs_stats_mode_unset:
+		break;
+	case binderfs_stats_mode_global:
 		seq_printf(seq, ",stats=global");
+		break;
+	}
 
 	return 0;
 }
 
+static void binderfs_put_super(struct super_block *sb)
+{
+	struct binderfs_info *info = sb->s_fs_info;
+
+	if (info && info->ipc_ns)
+		put_ipc_ns(info->ipc_ns);
+
+	kfree(info);
+	sb->s_fs_info = NULL;
+}
+
 static const struct super_operations binderfs_super_ops = {
 	.evict_inode    = binderfs_evict_inode,
-	.remount_fs	= binderfs_remount,
-	.show_options	= binderfs_show_mount_opts,
+	.show_options	= binderfs_show_options,
 	.statfs         = simple_statfs,
+	.put_super	= binderfs_put_super,
 };
 
 static inline bool is_binderfs_control_device(const struct dentry *dentry)
@@ -653,10 +644,11 @@ static int init_binder_logs(struct super_block *sb)
 	return ret;
 }
 
-static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
+static int binderfs_fill_super(struct super_block *sb, struct fs_context *fc)
 {
 	int ret;
 	struct binderfs_info *info;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
 	struct inode *inode = NULL;
 	struct binderfs_device device_info = { 0 };
 	const char *name;
@@ -689,16 +681,14 @@ static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
 
 	info->ipc_ns = get_ipc_ns(current->nsproxy->ipc_ns);
 
-	ret = binderfs_parse_mount_opts(data, &info->mount_opts);
-	if (ret)
-		return ret;
-
 	info->root_gid = make_kgid(sb->s_user_ns, 0);
 	if (!gid_valid(info->root_gid))
 		info->root_gid = GLOBAL_ROOT_GID;
 	info->root_uid = make_kuid(sb->s_user_ns, 0);
 	if (!uid_valid(info->root_uid))
 		info->root_uid = GLOBAL_ROOT_UID;
+	info->mount_opts.max = ctx->max;
+	info->mount_opts.stats_mode = ctx->stats_mode;
 
 	inode = new_inode(sb);
 	if (!inode)
@@ -730,36 +720,54 @@ static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
 			name++;
 	}
 
-	if (info->mount_opts.stats_mode == STATS_GLOBAL)
+	if (info->mount_opts.stats_mode == binderfs_stats_mode_global)
 		return init_binder_logs(sb);
 
 	return 0;
 }
 
-static struct dentry *binderfs_mount(struct file_system_type *fs_type,
-				     int flags, const char *dev_name,
-				     void *data)
+static int binderfs_fs_context_get_tree(struct fs_context *fc)
 {
-	return mount_nodev(fs_type, flags, data, binderfs_fill_super);
+	return get_tree_nodev(fc, binderfs_fill_super);
 }
 
-static void binderfs_kill_super(struct super_block *sb)
+static void binderfs_fs_context_free(struct fs_context *fc)
 {
-	struct binderfs_info *info = sb->s_fs_info;
+	struct binderfs_mount_opts *ctx = fc->fs_private;
 
-	kill_litter_super(sb);
+	kfree(ctx);
+}
 
-	if (info && info->ipc_ns)
-		put_ipc_ns(info->ipc_ns);
+static const struct fs_context_operations binderfs_fs_context_ops = {
+	.free		= binderfs_fs_context_free,
+	.get_tree	= binderfs_fs_context_get_tree,
+	.parse_param	= binderfs_fs_context_parse_param,
+	.reconfigure	= binderfs_fs_context_reconfigure,
+};
 
-	kfree(info);
+static int binderfs_init_fs_context(struct fs_context *fc)
+{
+	struct binderfs_mount_opts *ctx = fc->fs_private;
+
+	ctx = kzalloc(sizeof(struct binderfs_mount_opts), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->max = BINDERFS_MAX_MINOR;
+	ctx->stats_mode = binderfs_stats_mode_unset;
+
+	fc->fs_private = ctx;
+	fc->ops = &binderfs_fs_context_ops;
+
+	return 0;
 }
 
 static struct file_system_type binder_fs_type = {
-	.name		= "binder",
-	.mount		= binderfs_mount,
-	.kill_sb	= binderfs_kill_super,
-	.fs_flags	= FS_USERNS_MOUNT,
+	.name			= "binder",
+	.init_fs_context	= binderfs_init_fs_context,
+	.parameters		= binderfs_fs_parameters,
+	.kill_sb		= kill_litter_super,
+	.fs_flags		= FS_USERNS_MOUNT,
 };
 
 int __init init_binderfs(void)

drivers/auxdisplay/charlcd.c

@@ -22,8 +22,6 @@
 
 #include "charlcd.h"
 
-#define LCD_MINOR		156
-
 #define DEFAULT_LCD_BWIDTH      40
 #define DEFAULT_LCD_HWIDTH      64
 

drivers/auxdisplay/panel.c

@@ -57,8 +57,6 @@
 
 #include "charlcd.h"
 
-#define KEYPAD_MINOR		185
-
 #define LCD_MAXBYTES		256	/* max burst write */
 
 #define KEYPAD_BUFFER		64

drivers/bus/Kconfig

@@ -201,5 +201,6 @@ config DA8XX_MSTPRI
 	  peripherals.
 
 source "drivers/bus/fsl-mc/Kconfig"
+source "drivers/bus/mhi/Kconfig"
 
 endmenu

drivers/bus/Makefile

@@ -34,3 +34,6 @@ obj-$(CONFIG_UNIPHIER_SYSTEM_BUS)	+= uniphier-system-bus.o
 obj-$(CONFIG_VEXPRESS_CONFIG)	+= vexpress-config.o
 
 obj-$(CONFIG_DA8XX_MSTPRI)	+= da8xx-mstpri.o
+
+# MHI
+obj-$(CONFIG_MHI_BUS)		+= mhi/

drivers/bus/mhi/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+#
+# MHI bus
+#
+# Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+#
+
+config MHI_BUS
+       tristate "Modem Host Interface (MHI) bus"
+       help
+	 Bus driver for MHI protocol. Modem Host Interface (MHI) is a
+	 communication protocol used by the host processors to control
+	 and communicate with modem devices over a high speed peripheral
+	 bus or shared memory.

drivers/bus/mhi/Makefile

+# core layer
+obj-y += core/

drivers/bus/mhi/core/Makefile

+obj-$(CONFIG_MHI_BUS) := mhi.o
+
+mhi-y := init.o main.o pm.o boot.o

drivers/char/Kconfig

@@ -7,28 +7,6 @@ menu "Character devices"
 
 source "drivers/tty/Kconfig"
 
-config DEVMEM
-	bool "/dev/mem virtual device support"
-	default y
-	help
-	  Say Y here if you want to support the /dev/mem device.
-	  The /dev/mem device is used to access areas of physical
-	  memory.
-	  When in doubt, say "Y".
-
-config DEVKMEM
-	bool "/dev/kmem virtual device support"
-	# On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write
-	depends on !ARM64
-	help
-	  Say Y here if you want to support the /dev/kmem device. The
-	  /dev/kmem device is rarely used, but can be used for certain
-	  kind of kernel debugging operations.
-	  When in doubt, say "N".
-
-source "drivers/tty/serial/Kconfig"
-source "drivers/tty/serdev/Kconfig"
-
 config TTY_PRINTK
 	tristate "TTY driver to output user messages via printk"
 	depends on EXPERT && TTY
@@ -113,8 +91,6 @@ config PPDEV
 
 	  If unsure, say N.
 
-source "drivers/tty/hvc/Kconfig"
-
 config VIRTIO_CONSOLE
 	tristate "Virtio console"
 	depends on VIRTIO && TTY
@@ -220,89 +196,6 @@ config NWFLASH
 
 source "drivers/char/hw_random/Kconfig"
 
-config NVRAM
-	tristate "/dev/nvram support"
-	depends on X86 || HAVE_ARCH_NVRAM_OPS
-	default M68K || PPC
-	---help---
-	  If you say Y here and create a character special file /dev/nvram
-	  with major number 10 and minor number 144 using mknod ("man mknod"),
-	  you get read and write access to the non-volatile memory.
-
-	  /dev/nvram may be used to view settings in NVRAM or to change them
-	  (with some utility). It could also be used to frequently
-	  save a few bits of very important data that may not be lost over
-	  power-off and for which writing to disk is too insecure. Note
-	  however that most NVRAM space in a PC belongs to the BIOS and you
-	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
-	  for a guide to the use of CMOS bytes by your BIOS.
-
-	  This memory is conventionally called "NVRAM" on PowerPC machines,
-	  "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called nvram.
-
-#
-# These legacy RTC drivers just cause too many conflicts with the generic
-# RTC framework ... let's not even try to coexist any more.
-#
-if RTC_LIB=n
-
-config RTC
-	tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
-	depends on ALPHA
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you run Linux on a multiprocessor machine and said Y to
-	  "Symmetric Multi Processing" above, you should say Y here to read
-	  and set the RTC in an SMP compatible fashion.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
-	  for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rtc.
-
-config JS_RTC
-	tristate "Enhanced Real Time Clock Support"
-	depends on SPARC32 && PCI
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst>
-	  for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called js-rtc.
-
-config EFI_RTC
-	bool "EFI Real Time Clock Services"
-	depends on IA64
-
-endif # RTC_LIB
-
 config DTLK
 	tristate "Double Talk PC internal speech card support"
 	depends on ISA
@@ -431,6 +324,48 @@ config NSC_GPIO
 	  pc8736x_gpio drivers.  If those drivers are built as
 	  modules, this one will be too, named nsc_gpio
 
+config DEVMEM
+	bool "/dev/mem virtual device support"
+	default y
+	help
+	  Say Y here if you want to support the /dev/mem device.
+	  The /dev/mem device is used to access areas of physical
+	  memory.
+	  When in doubt, say "Y".
+
+config DEVKMEM
+	bool "/dev/kmem virtual device support"
+	# On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write
+	depends on !ARM64
+	help
+	  Say Y here if you want to support the /dev/kmem device. The
+	  /dev/kmem device is rarely used, but can be used for certain
+	  kind of kernel debugging operations.
+	  When in doubt, say "N".
+
+config NVRAM
+	tristate "/dev/nvram support"
+	depends on X86 || HAVE_ARCH_NVRAM_OPS
+	default M68K || PPC
+	---help---
+	  If you say Y here and create a character special file /dev/nvram
+	  with major number 10 and minor number 144 using mknod ("man mknod"),
+	  you get read and write access to the non-volatile memory.
+
+	  /dev/nvram may be used to view settings in NVRAM or to change them
+	  (with some utility). It could also be used to frequently
+	  save a few bits of very important data that may not be lost over
+	  power-off and for which writing to disk is too insecure. Note
+	  however that most NVRAM space in a PC belongs to the BIOS and you
+	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
+	  for a guide to the use of CMOS bytes by your BIOS.
+
+	  This memory is conventionally called "NVRAM" on PowerPC machines,
+	  "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvram.
+
 config RAW_DRIVER
 	tristate "RAW driver (/dev/raw/rawN)"
 	depends on BLOCK
@@ -452,6 +387,14 @@ config MAX_RAW_DEVS
 	  Default is 256. Increase this number in case you need lots of
 	  raw devices.
 
+config DEVPORT
+	bool "/dev/port character device"
+	depends on ISA || PCI
+	default y
+	help
+	  Say Y here if you want to support the /dev/port device. The /dev/port
+	  device is similar to /dev/mem, but for I/O ports.
+
 config HPET
 	bool "HPET - High Precision Event Timer" if (X86 || IA64)
 	default n
@@ -511,14 +454,6 @@ config TELCLOCK
 	  /sys/devices/platform/telco_clock, with a number of files for
 	  controlling the behavior of this hardware.
 
-config DEVPORT
-	bool "/dev/port character device"
-	depends on ISA || PCI
-	default y
-	help
-	  Say Y here if you want to support the /dev/port device. The /dev/port
-	  device is similar to /dev/mem, but for I/O ports.
-
 source "drivers/s390/char/Kconfig"
 
 source "drivers/char/xillybus/Kconfig"

drivers/char/Makefile

@@ -20,9 +20,7 @@ obj-$(CONFIG_APM_EMULATION)	+= apm-emulation.o
 obj-$(CONFIG_DTLK)		+= dtlk.o
 obj-$(CONFIG_APPLICOM)		+= applicom.o
 obj-$(CONFIG_SONYPI)		+= sonypi.o
-obj-$(CONFIG_RTC)		+= rtc.o
 obj-$(CONFIG_HPET)		+= hpet.o
-obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_XILINX_HWICAP)	+= xilinx_hwicap/
 obj-$(CONFIG_NVRAM)		+= nvram.o
 obj-$(CONFIG_TOSHIBA)		+= toshiba.o
@@ -46,9 +44,6 @@ obj-$(CONFIG_TCG_TPM)		+= tpm/
 
 obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
 
-obj-$(CONFIG_JS_RTC)		+= js-rtc.o
-js-rtc-y = rtc.o
-
 obj-$(CONFIG_XILLYBUS)		+= xillybus/
 obj-$(CONFIG_POWERNV_OP_PANEL)	+= powernv-op-panel.o
 obj-$(CONFIG_ADI)		+= adi.o

drivers/char/applicom.c

@@ -53,7 +53,6 @@
 #define MAX_BOARD 8		/* maximum of pc board possible */
 #define MAX_ISA_BOARD 4
 #define LEN_RAM_IO 0x800
-#define AC_MINOR 157
 
 #ifndef PCI_VENDOR_ID_APPLICOM
 #define PCI_VENDOR_ID_APPLICOM                0x1389

drivers/char/mspec.c

@@ -75,7 +75,7 @@ struct vma_data {
 	enum mspec_page_type type; /* Type of pages allocated. */
 	unsigned long vm_start;	/* Original (unsplit) base. */
 	unsigned long vm_end;	/* Original (unsplit) end. */
-	unsigned long maddr[0];	/* Array of MSPEC addresses. */
+	unsigned long maddr[];	/* Array of MSPEC addresses. */
 };
 
 /*

drivers/char/nwbutton.h

@@ -14,7 +14,6 @@
 #define NUM_PRESSES_REBOOT 2	/* How many presses to activate shutdown */
 #define BUTTON_DELAY 30 	/* How many jiffies for sequence to end */
 #define VERSION "0.3"		/* Driver version number */
-#define BUTTON_MINOR 158	/* Major 10, Minor 158, /dev/nwbutton */
 
 /* Structure definitions: */
 

drivers/char/nwflash.c

@@ -576,7 +576,7 @@ static const struct file_operations flash_fops =
 
 static struct miscdevice flash_miscdev =
 {
-	FLASH_MINOR,
+	NWFLASH_MINOR,
 	"nwflash",
 	&flash_fops
 };

drivers/char/pcmcia/cm4000_cs.c

@@ -731,8 +731,9 @@ static void monitor_card(struct timer_list *t)
 	}
 
 	switch (dev->mstate) {
+	case M_CARDOFF: {
 		unsigned char flags0;
-	case M_CARDOFF:
+
 		DEBUGP(4, dev, "M_CARDOFF\n");
 		flags0 = inb(REG_FLAGS0(iobase));
 		if (flags0 & 0x02) {
@@ -755,6 +756,7 @@ static void monitor_card(struct timer_list *t)
 			dev->mdelay = T_50MSEC;
 		}
 		break;
+	}
 	case M_FETCH_ATR:
 		DEBUGP(4, dev, "M_FETCH_ATR\n");
 		xoutb(0x80, REG_FLAGS0(iobase));

drivers/char/ppdev.c

@@ -355,14 +355,19 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct pp_struct *pp = file->private_data;
 	struct parport *port;
 	void __user *argp = (void __user *)arg;
+	struct ieee1284_info *info;
+	unsigned char reg;
+	unsigned char mask;
+	int mode;
+	s32 time32[2];
+	s64 time64[2];
+	struct timespec64 ts;
+	int ret;
 
 	/* First handle the cases that don't take arguments. */
 	switch (cmd) {
 	case PPCLAIM:
 	    {
-		struct ieee1284_info *info;
-		int ret;
-
 		if (pp->flags & PP_CLAIMED) {
 			dev_dbg(&pp->pdev->dev, "you've already got it!\n");
 			return -EINVAL;
@@ -513,15 +518,6 @@ static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	port = pp->pdev->port;
 	switch (cmd) {
-		struct ieee1284_info *info;
-		unsigned char reg;
-		unsigned char mask;
-		int mode;
-		s32 time32[2];
-		s64 time64[2];
-		struct timespec64 ts;
-		int ret;
-
 	case PPRSTATUS:
 		reg = parport_read_status(port);
 		if (copy_to_user(argp, &reg, sizeof(reg)))

drivers/char/toshiba.c

@@ -61,8 +61,6 @@
 #include <linux/mutex.h>
 #include <linux/toshiba.h>
 
-#define TOSH_MINOR_DEV 181
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>");
 MODULE_DESCRIPTION("Toshiba laptop SMM driver");

drivers/char/virtio_console.c

@@ -112,7 +112,7 @@ struct port_buffer {
 	unsigned int sgpages;
 
 	/* sg is used if spages > 0. sg must be the last in is struct */
-	struct scatterlist sg[0];
+	struct scatterlist sg[];
 };
 
 /*

drivers/extcon/extcon.c

@@ -1406,6 +1406,7 @@ const char *extcon_get_edev_name(struct extcon_dev *edev)
 {
 	return !edev ? NULL : edev->name;
 }
+EXPORT_SYMBOL_GPL(extcon_get_edev_name);
 
 static int __init extcon_class_init(void)
 {

drivers/firmware/Kconfig

@@ -206,7 +206,7 @@ config FW_CFG_SYSFS_CMDLINE
 
 config INTEL_STRATIX10_SERVICE
 	tristate "Intel Stratix10 Service Layer"
-	depends on ARCH_STRATIX10 && HAVE_ARM_SMCCC
+	depends on (ARCH_STRATIX10 || ARCH_AGILEX) && HAVE_ARM_SMCCC
 	default n
 	help
 	  Intel Stratix10 service layer runs at privileged exception level,