Commit 0ce88b34 authored by Alberto Panizzo's avatar Alberto Panizzo Committed by Sascha Hauer

mach-mx31_3ds: Add support for the MMC slot of the personality board

Signed-off-by: default avatarAlberto Panizzo <alberto@amarulasolutions.com>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent beb85964
...@@ -35,6 +35,7 @@ ...@@ -35,6 +35,7 @@
#include <mach/iomux-mx3.h> #include <mach/iomux-mx3.h>
#include <mach/3ds_debugboard.h> #include <mach/3ds_debugboard.h>
#include <mach/ulpi.h> #include <mach/ulpi.h>
#include <mach/mmc.h>
#include "devices-imx31.h" #include "devices-imx31.h"
#include "devices.h" #include "devices.h"
...@@ -99,6 +100,85 @@ static int mx31_3ds_pins[] = { ...@@ -99,6 +100,85 @@ static int mx31_3ds_pins[] = {
/* I2C1 */ /* I2C1 */
MX31_PIN_I2C_CLK__I2C1_SCL, MX31_PIN_I2C_CLK__I2C1_SCL,
MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_DAT__I2C1_SDA,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK,
MX31_PIN_SD1_CMD__SD1_CMD,
MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
};
/*
* Support for SD card slot in personality board
*/
#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
static struct gpio mx31_3ds_sdhc1_gpios[] = {
{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
};
static int mx31_3ds_sdhc1_init(struct device *dev,
irq_handler_t detect_irq,
void *data)
{
int ret;
ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
if (ret) {
pr_warning("Unable to request the SD/MMC GPIOs.\n");
return ret;
}
ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
detect_irq, IRQF_DISABLED |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
if (ret) {
pr_warning("Unable to request the SD/MMC card-detect IRQ.\n");
goto gpio_free;
}
return 0;
gpio_free:
gpio_free_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
return ret;
}
static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
{
free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
gpio_free_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
}
static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
{
/*
* While the voltage stuff is done by the driver, activate the
* Buffer Enable Pin only if there is a card in slot to fix the card
* voltage issue caused by bi-directional chip TXB0108 on 3Stack.
* Done here because at this stage we have for sure a debounced value
* of the presence of the card, showed by the value of vdd.
* 7 == ilog2(MMC_VDD_165_195)
*/
if (vdd > 7)
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
else
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
}
static struct imxmmc_platform_data sdhc1_pdata = {
.init = mx31_3ds_sdhc1_init,
.exit = mx31_3ds_sdhc1_exit,
.setpower = mx31_3ds_sdhc1_setpower,
}; };
/* /*
...@@ -137,6 +217,21 @@ static struct regulator_init_data gpo_init = { ...@@ -137,6 +217,21 @@ static struct regulator_init_data gpo_init = {
} }
}; };
static struct regulator_consumer_supply vmmc2_consumers[] = {
REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
};
static struct regulator_init_data vmmc2_init = {
.constraints = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
.consumer_supplies = vmmc2_consumers,
};
static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
{ {
.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
...@@ -151,6 +246,9 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { ...@@ -151,6 +246,9 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
}, { }, {
.id = MC13783_REG_GPO3, /* Turn on 3.3V */ .id = MC13783_REG_GPO3, /* Turn on 3.3V */
.init_data = &gpo_init, .init_data = &gpo_init,
}, {
.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
.init_data = &vmmc2_init,
}, },
}; };
...@@ -362,6 +460,7 @@ static void __init mx31_3ds_init(void) ...@@ -362,6 +460,7 @@ static void __init mx31_3ds_init(void)
"devices on the debug board are unusable.\n"); "devices on the debug board are unusable.\n");
imx31_add_imx2_wdt(NULL); imx31_add_imx2_wdt(NULL);
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
imx31_add_mxc_mmc(0, &sdhc1_pdata);
} }
static void __init mx31_3ds_timer_init(void) static void __init mx31_3ds_timer_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment