mmc: jz4740: don't wait for PRG_DONE after stop command with R1 response

As of commit bcc3e172 ("mmc: block: Use R1 responses for stop cmds for
read requests"), stop commands for reads do not have MMC_RSP_BUSY set.
In this case we should not wait for a PRG_DONE IRQ after sending the
stop command: it will not get raised when the busy flag is not set,
causing the request to fail with a timeout.
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Chris Ball <chris@printf.net>
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>

drivers/mmc/host/jz4740_mmc.c

@@ -515,11 +515,14 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid)
 
 		jz4740_mmc_send_command(host, req->stop);
 
-		timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_PRG_DONE);
+		if (mmc_resp_type(req->stop) & MMC_RSP_BUSY) {
+			timeout = jz4740_mmc_poll_irq(host,
+						      JZ_MMC_IRQ_PRG_DONE);
 			if (timeout) {
 				host->state = JZ4740_MMC_STATE_DONE;
 				break;
 			}
+		}
 	case JZ4740_MMC_STATE_DONE:
 		break;
 	}