Merge tag 'tags/deps-irqchip-gic-3.17' into irqchip/core

From local branch irqchip/gic, this is topic branch that was set up to
facilitate merging other changes depending on the new GICv3 driver.

arch/arm64/Kconfig

@@ -9,6 +9,7 @@ config ARM64
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
+	select ARM_GIC_V3
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK

arch/arm64/kernel/head.S

@@ -22,6 +22,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/assembler.h>
 #include <asm/ptrace.h>
@@ -296,6 +297,23 @@ CPU_LE(	bic	x0, x0, #(3 << 24)	)	// Clear the EE and E0E bits for EL1
 	msr	cnthctl_el2, x0
 	msr	cntvoff_el2, xzr		// Clear virtual offset
 
+#ifdef CONFIG_ARM_GIC_V3
+	/* GICv3 system register access */
+	mrs	x0, id_aa64pfr0_el1
+	ubfx	x0, x0, #24, #4
+	cmp	x0, #1
+	b.ne	3f
+
+	mrs	x0, ICC_SRE_EL2
+	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
+	orr	x0, x0, #ICC_SRE_EL2_ENABLE	// Set ICC_SRE_EL2.Enable==1
+	msr	ICC_SRE_EL2, x0
+	isb					// Make sure SRE is now set
+	msr	ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
+
+3:
+#endif
+
 	/* Populate ID registers. */
 	mrs	x0, midr_el1
 	mrs	x1, mpidr_el1

arch/arm64/kernel/hyp-stub.S

@@ -19,6 +19,7 @@
 
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/assembler.h>
 #include <asm/ptrace.h>

drivers/irqchip/Kconfig

@@ -10,6 +10,11 @@ config ARM_GIC
 config GIC_NON_BANKED
 	bool
 
+config ARM_GIC_V3
+	bool
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+
 config ARM_NVIC
 	bool
 	select IRQ_DOMAIN

drivers/irqchip/Makefile

@@ -16,7 +16,8 @@ obj-$(CONFIG_ORION_IRQCHIP)		+= irq-orion.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sun4i.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi-nmi.o
 obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
-obj-$(CONFIG_ARM_GIC)			+= irq-gic.o
+obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
+obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
 obj-$(CONFIG_ARM_NVIC)			+= irq-nvic.o
 obj-$(CONFIG_ARM_VIC)			+= irq-vic.o
 obj-$(CONFIG_IMGPDC_IRQ)		+= irq-imgpdc.o

drivers/irqchip/irq-gic-common.c

+/*
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include "irq-gic-common.h"
+
+void gic_configure_irq(unsigned int irq, unsigned int type,
+		       void __iomem *base, void (*sync_access)(void))
+{
+	u32 enablemask = 1 << (irq % 32);
+	u32 enableoff = (irq / 32) * 4;
+	u32 confmask = 0x2 << ((irq % 16) * 2);
+	u32 confoff = (irq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/*
+	 * Read current configuration register, and insert the config
+	 * for "irq", depending on "type".
+	 */
+	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		if (sync_access)
+			sync_access();
+		enabled = true;
+	}
+
+	/*
+	 * Write back the new configuration, and possibly re-enable
+	 * the interrupt.
+	 */
+	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	if (sync_access)
+		sync_access();
+}
+
+void __init gic_dist_config(void __iomem *base, int gic_irqs,
+			    void (*sync_access)(void))
+{
+	unsigned int i;
+
+	/*
+	 * Set all global interrupts to be level triggered, active low.
+	 */
+	for (i = 32; i < gic_irqs; i += 16)
+		writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);
+
+	/*
+	 * Set priority on all global interrupts.
+	 */
+	for (i = 32; i < gic_irqs; i += 4)
+		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);
+
+	/*
+	 * Disable all interrupts.  Leave the PPI and SGIs alone
+	 * as they are enabled by redistributor registers.
+	 */
+	for (i = 32; i < gic_irqs; i += 32)
+		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);
+
+	if (sync_access)
+		sync_access();
+}
+
+void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
+{
+	int i;
+
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
+	writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+
+	if (sync_access)
+		sync_access();
+}

drivers/irqchip/irq-gic-common.h

+/*
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _IRQ_GIC_COMMON_H
+#define _IRQ_GIC_COMMON_H
+
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+
+void gic_configure_irq(unsigned int irq, unsigned int type,
+                       void __iomem *base, void (*sync_access)(void));
+void gic_dist_config(void __iomem *base, int gic_irqs,
+		     void (*sync_access)(void));
+void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
+
+#endif /* _IRQ_GIC_COMMON_H */

drivers/irqchip/irq-gic.c

@@ -46,6 +46,7 @@
 #include <asm/exception.h>
 #include <asm/smp_plat.h>
 
+#include "irq-gic-common.h"
 #include "irqchip.h"
 
 union gic_base {
@@ -188,12 +189,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 {
 	void __iomem *base = gic_dist_base(d);
 	unsigned int gicirq = gic_irq(d);
-	u32 enablemask = 1 << (gicirq % 32);
-	u32 enableoff = (gicirq / 32) * 4;
-	u32 confmask = 0x2 << ((gicirq % 16) * 2);
-	u32 confoff = (gicirq / 16) * 4;
-	bool enabled = false;
-	u32 val;
 
 	/* Interrupt configuration for SGIs can't be changed */
 	if (gicirq < 16)
@@ -207,25 +202,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 	if (gic_arch_extn.irq_set_type)
 		gic_arch_extn.irq_set_type(d, type);
 
-	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
-	if (type == IRQ_TYPE_LEVEL_HIGH)
-		val &= ~confmask;
-	else if (type == IRQ_TYPE_EDGE_RISING)
-		val |= confmask;
-
-	/*
-	 * As recommended by the spec, disable the interrupt before changing
-	 * the configuration
-	 */
-	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
-		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
-		enabled = true;
-	}
-
-	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
-
-	if (enabled)
-		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+	gic_configure_irq(gicirq, type, base, NULL);
 
 	raw_spin_unlock(&irq_controller_lock);
 
@@ -386,12 +363,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 
 	writel_relaxed(0, base + GIC_DIST_CTRL);
 
-	/*
-	 * Set all global interrupts to be level triggered, active low.
-	 */
-	for (i = 32; i < gic_irqs; i += 16)
-		writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
-
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
@@ -401,18 +372,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	for (i = 32; i < gic_irqs; i += 4)
 		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
-	/*
-	 * Set priority on all global interrupts.
-	 */
-	for (i = 32; i < gic_irqs; i += 4)
-		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
-
-	/*
-	 * Disable all interrupts.  Leave the PPI and SGIs alone
-	 * as these enables are banked registers.
-	 */
-	for (i = 32; i < gic_irqs; i += 32)
-		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+	gic_dist_config(base, gic_irqs, NULL);
 
 	writel_relaxed(1, base + GIC_DIST_CTRL);
 }
@@ -439,18 +399,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
 		if (i != cpu)
 			gic_cpu_map[i] &= ~cpu_mask;
 
-	/*
-	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 */
-	writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-	/*
-	 * Set priority on PPI and SGI interrupts
-	 */
-	for (i = 0; i < 32; i += 4)
-		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+	gic_cpu_config(dist_base, NULL);
 
 	writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
 	writel_relaxed(1, base + GIC_CPU_CTRL);

include/linux/irqchip/arm-gic-v3.h

+/*
+ * Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __LINUX_IRQCHIP_ARM_GIC_V3_H
+#define __LINUX_IRQCHIP_ARM_GIC_V3_H
+
+/*
+ * Distributor registers. We assume we're running non-secure, with ARE
+ * being set. Secure-only and non-ARE registers are not described.
+ */
+#define GICD_CTLR			0x0000
+#define GICD_TYPER			0x0004
+#define GICD_IIDR			0x0008
+#define GICD_STATUSR			0x0010
+#define GICD_SETSPI_NSR			0x0040
+#define GICD_CLRSPI_NSR			0x0048
+#define GICD_SETSPI_SR			0x0050
+#define GICD_CLRSPI_SR			0x0058
+#define GICD_SEIR			0x0068
+#define GICD_ISENABLER			0x0100
+#define GICD_ICENABLER			0x0180
+#define GICD_ISPENDR			0x0200
+#define GICD_ICPENDR			0x0280
+#define GICD_ISACTIVER			0x0300
+#define GICD_ICACTIVER			0x0380
+#define GICD_IPRIORITYR			0x0400
+#define GICD_ICFGR			0x0C00
+#define GICD_IROUTER			0x6000
+#define GICD_PIDR2			0xFFE8
+
+#define GICD_CTLR_RWP			(1U << 31)
+#define GICD_CTLR_ARE_NS		(1U << 4)
+#define GICD_CTLR_ENABLE_G1A		(1U << 1)
+#define GICD_CTLR_ENABLE_G1		(1U << 0)
+
+#define GICD_IROUTER_SPI_MODE_ONE	(0U << 31)
+#define GICD_IROUTER_SPI_MODE_ANY	(1U << 31)
+
+#define GIC_PIDR2_ARCH_MASK		0xf0
+#define GIC_PIDR2_ARCH_GICv3		0x30
+#define GIC_PIDR2_ARCH_GICv4		0x40
+
+/*
+ * Re-Distributor registers, offsets from RD_base
+ */
+#define GICR_CTLR			GICD_CTLR
+#define GICR_IIDR			0x0004
+#define GICR_TYPER			0x0008
+#define GICR_STATUSR			GICD_STATUSR
+#define GICR_WAKER			0x0014
+#define GICR_SETLPIR			0x0040
+#define GICR_CLRLPIR			0x0048
+#define GICR_SEIR			GICD_SEIR
+#define GICR_PROPBASER			0x0070
+#define GICR_PENDBASER			0x0078
+#define GICR_INVLPIR			0x00A0
+#define GICR_INVALLR			0x00B0
+#define GICR_SYNCR			0x00C0
+#define GICR_MOVLPIR			0x0100
+#define GICR_MOVALLR			0x0110
+#define GICR_PIDR2			GICD_PIDR2
+
+#define GICR_WAKER_ProcessorSleep	(1U << 1)
+#define GICR_WAKER_ChildrenAsleep	(1U << 2)
+
+/*
+ * Re-Distributor registers, offsets from SGI_base
+ */
+#define GICR_ISENABLER0			GICD_ISENABLER
+#define GICR_ICENABLER0			GICD_ICENABLER
+#define GICR_ISPENDR0			GICD_ISPENDR
+#define GICR_ICPENDR0			GICD_ICPENDR
+#define GICR_ISACTIVER0			GICD_ISACTIVER
+#define GICR_ICACTIVER0			GICD_ICACTIVER
+#define GICR_IPRIORITYR0		GICD_IPRIORITYR
+#define GICR_ICFGR0			GICD_ICFGR
+
+#define GICR_TYPER_VLPIS		(1U << 1)
+#define GICR_TYPER_LAST			(1U << 4)
+
+/*
+ * CPU interface registers
+ */
+#define ICC_CTLR_EL1_EOImode_drop_dir	(0U << 1)
+#define ICC_CTLR_EL1_EOImode_drop	(1U << 1)
+#define ICC_SRE_EL1_SRE			(1U << 0)
+
+/*
+ * Hypervisor interface registers (SRE only)
+ */
+#define ICH_LR_VIRTUAL_ID_MASK		((1UL << 32) - 1)
+
+#define ICH_LR_EOI			(1UL << 41)
+#define ICH_LR_GROUP			(1UL << 60)
+#define ICH_LR_STATE			(3UL << 62)
+#define ICH_LR_PENDING_BIT		(1UL << 62)
+#define ICH_LR_ACTIVE_BIT		(1UL << 63)
+
+#define ICH_MISR_EOI			(1 << 0)
+#define ICH_MISR_U			(1 << 1)
+
+#define ICH_HCR_EN			(1 << 0)
+#define ICH_HCR_UIE			(1 << 1)
+
+#define ICH_VMCR_CTLR_SHIFT		0
+#define ICH_VMCR_CTLR_MASK		(0x21f << ICH_VMCR_CTLR_SHIFT)
+#define ICH_VMCR_BPR1_SHIFT		18
+#define ICH_VMCR_BPR1_MASK		(7 << ICH_VMCR_BPR1_SHIFT)
+#define ICH_VMCR_BPR0_SHIFT		21
+#define ICH_VMCR_BPR0_MASK		(7 << ICH_VMCR_BPR0_SHIFT)
+#define ICH_VMCR_PMR_SHIFT		24
+#define ICH_VMCR_PMR_MASK		(0xffUL << ICH_VMCR_PMR_SHIFT)
+
+#define ICC_EOIR1_EL1			S3_0_C12_C12_1
+#define ICC_IAR1_EL1			S3_0_C12_C12_0
+#define ICC_SGI1R_EL1			S3_0_C12_C11_5
+#define ICC_PMR_EL1			S3_0_C4_C6_0
+#define ICC_CTLR_EL1			S3_0_C12_C12_4
+#define ICC_SRE_EL1			S3_0_C12_C12_5
+#define ICC_GRPEN1_EL1			S3_0_C12_C12_7
+
+#define ICC_IAR1_EL1_SPURIOUS		0x3ff
+
+#define ICC_SRE_EL2			S3_4_C12_C9_5
+
+#define ICC_SRE_EL2_SRE			(1 << 0)
+#define ICC_SRE_EL2_ENABLE		(1 << 3)
+
+/*
+ * System register definitions
+ */
+#define ICH_VSEIR_EL2			S3_4_C12_C9_4
+#define ICH_HCR_EL2			S3_4_C12_C11_0
+#define ICH_VTR_EL2			S3_4_C12_C11_1
+#define ICH_MISR_EL2			S3_4_C12_C11_2
+#define ICH_EISR_EL2			S3_4_C12_C11_3
+#define ICH_ELSR_EL2			S3_4_C12_C11_5
+#define ICH_VMCR_EL2			S3_4_C12_C11_7
+
+#define __LR0_EL2(x)			S3_4_C12_C12_ ## x
+#define __LR8_EL2(x)			S3_4_C12_C13_ ## x
+
+#define ICH_LR0_EL2			__LR0_EL2(0)
+#define ICH_LR1_EL2			__LR0_EL2(1)
+#define ICH_LR2_EL2			__LR0_EL2(2)
+#define ICH_LR3_EL2			__LR0_EL2(3)
+#define ICH_LR4_EL2			__LR0_EL2(4)
+#define ICH_LR5_EL2			__LR0_EL2(5)
+#define ICH_LR6_EL2			__LR0_EL2(6)
+#define ICH_LR7_EL2			__LR0_EL2(7)
+#define ICH_LR8_EL2			__LR8_EL2(0)
+#define ICH_LR9_EL2			__LR8_EL2(1)
+#define ICH_LR10_EL2			__LR8_EL2(2)
+#define ICH_LR11_EL2			__LR8_EL2(3)
+#define ICH_LR12_EL2			__LR8_EL2(4)
+#define ICH_LR13_EL2			__LR8_EL2(5)
+#define ICH_LR14_EL2			__LR8_EL2(6)
+#define ICH_LR15_EL2			__LR8_EL2(7)
+
+#define __AP0Rx_EL2(x)			S3_4_C12_C8_ ## x
+#define ICH_AP0R0_EL2			__AP0Rx_EL2(0)
+#define ICH_AP0R1_EL2			__AP0Rx_EL2(1)
+#define ICH_AP0R2_EL2			__AP0Rx_EL2(2)
+#define ICH_AP0R3_EL2			__AP0Rx_EL2(3)
+
+#define __AP1Rx_EL2(x)			S3_4_C12_C9_ ## x
+#define ICH_AP1R0_EL2			__AP1Rx_EL2(0)
+#define ICH_AP1R1_EL2			__AP1Rx_EL2(1)
+#define ICH_AP1R2_EL2			__AP1Rx_EL2(2)
+#define ICH_AP1R3_EL2			__AP1Rx_EL2(3)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/stringify.h>
+
+static inline void gic_write_eoir(u64 irq)
+{
+	asm volatile("msr " __stringify(ICC_EOIR1_EL1) ", %0" : : "r" (irq));
+	isb();
+}
+
+#endif
+
+#endif