Merge tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "The main MIPS changes for 5.5:

   - Atomics-related code sees some rework & cleanup, most notably
     allowing Loongson LL/SC errata workarounds to be more bulletproof &
     their correctness to be checked at build time.

   - Command line setup code is simplified somewhat, resolving various
     corner cases.

   - MIPS kernels can now be built with kcov code coverage support.

   - We can now build with CONFIG_FORTIFY_SOURCE=y.

   - Miscellaneous cleanups.

  And some platform specific changes:

   - We now disable some broken TLB functionality on certain Ingenic
     systems, and JZ4780 systems gain some devicetree nodes to support
     more devices.

   - Loongson support sees a number of cleanups, and we gain initial
     support for Loongson 3A R4 systems.

   - We gain support for MediaTek MT7688-based GARDENA Smart Gateway
     systems.

   - SGI IP27 (Origin 2*) see a number of fixes, cleanups &
     simplifications.

   - SGI IP30 (Octane) systems are now supported"

* tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
  MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module
  MIPS: PCI: Fix fake subdevice ID for IOC3
  MIPS: Ingenic: Disable abandoned HPTLB function.
  MIPS: PCI: remember nasid changed by set interrupt affinity
  MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter
  mips: add support for folded p4d page tables
  mips: drop __pXd_offset() macros that duplicate pXd_index() ones
  mips: fix build when "48 bits virtual memory" is enabled
  MIPS: math-emu: Reuse name array in debugfs_fpuemu()
  MIPS: allow building with kcov coverage
  MIPS: Loongson64: Drop setup_pcimap
  MIPS: Loongson2ef: Convert to early_printk_8250
  MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED
  MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline
  MIPS: Drop pmon.h
  MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage
  MIPS: Loongson: Rename LOONGSON1 to LOONGSON32
  MIPS: Loongson: Fix return value of loongson_hwmon_init
  MIPS: add support for SGI Octane (IP30)
  MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common
  ...

Documentation/devicetree/bindings/mips/ralink.txt

@@ -16,3 +16,17 @@ value must be one of the following values:
   ralink,mt7620a-soc
   ralink,mt7620n-soc
   ralink,mt7628a-soc
+  ralink,mt7688a-soc
+
+2. Boards
+
+GARDENA smart Gateway (MT7688)
+
+This board is based on the MediaTek MT7688 and equipped with 128 MiB
+of DDR and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND
+storage.
+
+------------------------------
+Required root node properties:
+- compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
+		"ralink,mt7628a-soc";

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -343,6 +343,8 @@ patternProperties:
     description: Freescale Semiconductor
   "^fujitsu,.*":
     description: Fujitsu Ltd.
+  "^gardena,.*":
+    description: GARDENA GmbH
   "^gateworks,.*":
     description: Gateworks Corporation
   "^gcw,.*":

Documentation/driver-api/nvmem.rst

@@ -129,6 +129,8 @@ To facilitate such consumers NVMEM framework provides below apis::
   struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
   struct nvmem_device *devm_nvmem_device_get(struct device *dev,
 					   const char *name);
+  struct nvmem_device *nvmem_device_find(void *data,
+			int (*match)(struct device *dev, const void *data));
   void nvmem_device_put(struct nvmem_device *nvmem);
   int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
 		      size_t bytes, void *buf);

MAINTAINERS

@@ -10900,18 +10900,18 @@ F:	arch/mips/include/asm/mach-loongson32/
 F:	drivers/*/*loongson1*
 F:	drivers/*/*/*loongson1*
 
-MIPS/LOONGSON2 ARCHITECTURE
+MIPS/LOONGSON2EF ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-F:	arch/mips/loongson64/fuloong-2e/
-F:	arch/mips/loongson64/lemote-2f/
-F:	arch/mips/include/asm/mach-loongson64/
+F:	arch/mips/loongson2ef/
+F:	arch/mips/include/asm/mach-loongson2ef/
 F:	drivers/*/*loongson2*
 F:	drivers/*/*/*loongson2*
 
-MIPS/LOONGSON3 ARCHITECTURE
+MIPS/LOONGSON64 ARCHITECTURE
 M:	Huacai Chen <chenhc@lemote.com>
+M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/

arch/mips/Kbuild.platforms

@@ -17,6 +17,7 @@ platforms += jazz
 platforms += jz4740
 platforms += lantiq
 platforms += lasat
+platforms += loongson2ef
 platforms += loongson32
 platforms += loongson64
 platforms += mti-malta
@@ -30,6 +31,7 @@ platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
 platforms += sgi-ip27
+platforms += sgi-ip30
 platforms += sgi-ip32
 platforms += sibyte
 platforms += sni

arch/mips/Kconfig.debug

@@ -32,7 +32,6 @@ config USE_GENERIC_EARLY_PRINTK_8250
 
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
-	default n
 	help
 	  For most systems, it is firmware or second stage bootloader that
 	  by default specifies the kernel command line options.  However,
@@ -53,7 +52,6 @@ config CMDLINE_BOOL
 config CMDLINE
 	string "Default kernel command string"
 	depends on CMDLINE_BOOL
-	default ""
 	help
 	  On some platforms, there is currently no way for the boot loader to
 	  pass arguments to the kernel.  For these platforms, and for the cases
@@ -68,7 +66,6 @@ config CMDLINE
 
 config CMDLINE_OVERRIDE
 	bool "Built-in command line overrides firmware arguments"
-	default n
 	depends on CMDLINE_BOOL
 	help
 	  By setting this option to 'Y' you will have your kernel ignore

arch/mips/Makefile

@@ -14,6 +14,9 @@
 
 archscripts: scripts_basic
 	$(Q)$(MAKE) $(build)=arch/mips/tools elf-entry
+ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y)
+	$(Q)$(MAKE) $(build)=arch/mips/tools loongson3-llsc-check
+endif
 	$(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs
 
 KBUILD_DEFCONFIG := 32r2el_defconfig

arch/mips/Makefile.postlink

@@ -3,7 +3,8 @@
 # Post-link MIPS pass
 # ===========================================================================
 #
-# 1. Insert relocations into vmlinux
+# 1. Check that Loongson3 LL/SC workarounds are applied correctly
+# 2. Insert relocations into vmlinux
 
 PHONY := __archpost
 __archpost:
@@ -11,6 +12,10 @@ __archpost:
 -include include/config/auto.conf
 include scripts/Kbuild.include
 
+CMD_LS3_LLSC = arch/mips/tools/loongson3-llsc-check
+quiet_cmd_ls3_llsc = LLSCCHK $@
+      cmd_ls3_llsc = $(CMD_LS3_LLSC) $@
+
 CMD_RELOCS = arch/mips/boot/tools/relocs
 quiet_cmd_relocs = RELOCS $@
       cmd_relocs = $(CMD_RELOCS) $@
@@ -19,6 +24,9 @@ quiet_cmd_relocs = RELOCS $@
 
 vmlinux: FORCE
 	@true
+ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y)
+	$(call if_changed,ls3_llsc)
+endif
 ifeq ($(CONFIG_RELOCATABLE),y)
 	$(call if_changed,relocs)
 endif

arch/mips/boot/dts/ingenic/ci20.dts

@@ -25,12 +25,47 @@ memory {
 		       0x30000000 0x30000000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "ci20:red:led0";
+			gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		led1 {
+			label = "ci20:red:led1";
+			gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led2 {
+			label = "ci20:red:led2";
+			gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led3 {
+			label = "ci20:red:led3";
+			gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+	};
+
 	eth0_power: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "eth0_power";
 		gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
+
+	wlan0_power: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan0_power";
+		gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
 };
 
 &ext {
@@ -54,9 +89,18 @@ &mmc1 {
 
 	bus-width = <4>;
 	max-frequency = <50000000>;
+	non-removable;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_mmc1>;
+
+	brcmf: wifi@1 {
+/*		reg = <4>;*/
+		compatible = "brcm,bcm4330-fmac";
+		vcc-supply = <&wlan0_power>;
+		device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &uart0 {
@@ -73,6 +117,23 @@ &uart1 {
 	pinctrl-0 = <&pins_uart1>;
 };
 
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&wlan0_power>;
+		device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &uart3 {
 	status = "okay";
 
@@ -87,6 +148,123 @@ &uart4 {
 	pinctrl-0 = <&pins_uart4>;
 };
 
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c0>;
+
+	clock-frequency = <400000>;
+
+	act8600: act8600@5a {
+		compatible = "active-semi,act8600";
+		reg = <0x5a>;
+		status = "okay";
+
+		regulators {
+			vddcore: SUDCDC1 {
+				regulator-name = "VDDCORE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+			vddmem: SUDCDC2 {
+				regulator-name = "VDDMEM";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+			vcc_33: SUDCDC3 {
+				regulator-name = "VCC33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			vcc_50: SUDCDC4 {
+				regulator-name = "VCC50";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+			};
+			vcc_25: LDO_REG5 {
+				regulator-name = "VCC25";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+			wifi_io: LDO_REG6 {
+				regulator-name = "WIFIIO";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+			vcc_28: LDO_REG7 {
+				regulator-name = "VCC28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+			vcc_15: LDO_REG8 {
+				regulator-name = "VCC15";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+			vcc_18: LDO_REG9 {
+				regulator-name = "VCC18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+			vcc_11: LDO_REG10 {
+				regulator-name = "VCC11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c1>;
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c2>;
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c3>;
+
+};
+
+&i2c4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c4>;
+
+	clock-frequency = <400000>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+			interrupts = <110>;
+		};
+};
+
 &nemc {
 	status = "okay";
 
@@ -197,6 +375,12 @@ pins_uart1: uart1 {
 		bias-disable;
 	};
 
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data", "uart2-hwflow";
+		bias-disable;
+	};
+
 	pins_uart3: uart3 {
 		function = "uart3";
 		groups = "uart3-data", "uart3-hwflow";
@@ -209,6 +393,36 @@ pins_uart4: uart4 {
 		bias-disable;
 	};
 
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-disable;
+	};
+
+	pins_i2c1: i2c1 {
+		function = "i2c1";
+		groups = "i2c1-data";
+		bias-disable;
+	};
+
+	pins_i2c2: i2c2 {
+		function = "i2c2";
+		groups = "i2c2-data";
+		bias-disable;
+	};
+
+	pins_i2c3: i2c3 {
+		function = "i2c3";
+		groups = "i2c3-data";
+		bias-disable;
+	};
+
+	pins_i2c4: i2c4 {
+		function = "i2c4";
+		groups = "i2c4-data-e";
+		bias-disable;
+	};
+
 	pins_nemc: nemc {
 		function = "nemc";
 		groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";

arch/mips/boot/dts/ingenic/jz4780.dtsi

@@ -262,6 +262,92 @@ uart4: serial@10034000 {
 		status = "disabled";
 	};
 
+	i2c0: i2c@10050000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x10050000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu JZ4780_CLK_SMB0>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c0_data>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c@10051000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10051000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu JZ4780_CLK_SMB1>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c1_data>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c@10052000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10052000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu JZ4780_CLK_SMB2>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c2_data>;
+
+		status = "disabled";
+	};
+
+	i2c3: i2c@10053000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10053000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <57>;
+
+		clocks = <&cgu JZ4780_CLK_SMB3>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c3_data>;
+
+		status = "disabled";
+	};
+
+	i2c4: i2c@10054000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10054000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <56>;
+
+		clocks = <&cgu JZ4780_CLK_SMB4>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c4_data>;
+
+		status = "disabled";
+	};
+
 	watchdog: watchdog@10002000 {
 		compatible = "ingenic,jz4780-watchdog";
 		reg = <0x10002000 0x10>;

arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Stefan Roese <sr@denx.de>
+ */
+
+/dts-v1/;
+
+/include/ "mt7628a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
+		     "ralink,mt7628a-soc";
+	model = "GARDENA smart Gateway (MT7688)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_gpio_gpio>;	/* GPIO11 */
+
+		user_btn1 {
+			label = "USER_BTN1";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code =<KEY_PROG1> ;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_pwm0_gpio>,	/* GPIO18 */
+			    <&pinmux_pwm1_gpio>,	/* GPIO19 */
+			    <&pinmux_sdmode_gpio>,	/* GPIO22..29 */
+			    <&pinmux_p0led_an_gpio>;	/* GPIO43 */
+		/*
+		 * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as
+		 * well for GPIO3. But this is already claimed for uart1
+		 * (see below). So we can't include it in this LED node.
+		 */
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet_link {
+			label = "smartgw:eth:link";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+
+		ethernet_activity {
+			label = "smartgw:eth:act";
+			gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&i2c {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0xa0000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "uboot_env0";
+				reg = <0xa0000 0x10000>;
+			};
+
+			partition@b0000 {
+				label = "uboot_env1";
+				reg = <0xb0000 0x10000>;
+			};
+
+			factory: partition@c0000 {
+				label = "factory";
+				reg = <0xc0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+
+	nand_flash@1 {
+		compatible = "spi-nand";
+		linux,mtd-name = "gd5f";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2s_gpio>;		/* GPIO0..3 */
+
+	rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_p2led_an_gpio>,	/* GPIO41 */
+		    <&pinmux_p3led_an_gpio>;	/* GPIO40 */
+
+	rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&watchdog {
+	status = "okay";
+};

arch/mips/boot/dts/ralink/mt7628a.dtsi

@@ -199,6 +199,22 @@ spi: spi@b00 {
 			status = "disabled";
 		};
 
+		i2c: i2c@900 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x900 0x100>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_i2c_i2c>;
+
+			resets = <&resetc 16>;
+			reset-names = "i2c";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		uart0: uartlite@c00 {
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;

arch/mips/cavium-octeon/setup.c

@@ -844,7 +844,7 @@ void __init prom_init(void)
 	 * BIST should always be enabled when doing a soft reset. L2
 	 * Cache locking for instance is not cleared unless BIST is
 	 * enabled.  Unfortunately due to a chip errata G-200 for
-	 * Cn38XX and CN31XX, BIST msut be disabled on these parts.
+	 * Cn38XX and CN31XX, BIST must be disabled on these parts.
 	 */
 	if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) ||
 	    OCTEON_IS_MODEL(OCTEON_CN31XX))

arch/mips/configs/fuloong2e_defconfig

@@ -15,7 +15,7 @@ CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_MACH_LOONGSON64=y
+CONFIG_MACH_LOONGSON2EF=y
 CONFIG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y

arch/mips/configs/lemote2f_defconfig

@@ -12,7 +12,7 @@ CONFIG_LOG_BUF_SHIFT=15
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_MACH_LOONGSON64=y
+CONFIG_MACH_LOONGSON2EF=y
 CONFIG_LEMOTE_MACH2F=y
 CONFIG_KEXEC=y
 # CONFIG_SECCOMP is not set

arch/mips/configs/loongson3_defconfig

@@ -12,7 +12,6 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
 CONFIG_BLK_CGROUP=y
@@ -24,7 +23,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_MACH_LOONGSON64=y
-CONFIG_LOONGSON_MACH3X=y
 CONFIG_SMP=y
 CONFIG_HZ_256=y
 CONFIG_KEXEC=y

arch/mips/fw/arc/Makefile

@@ -3,8 +3,12 @@
 # Makefile for the ARC prom monitor library routines under Linux.
 #
 
+ifdef CONFIG_ARC_CMDLINE_ONLY
+lib-y				+= cmdline.o
+else
 lib-y				+= cmdline.o env.o file.o identify.o init.o \
-				   misc.o salone.o time.o tree.o
+				   misc.o
+endif
 
 lib-$(CONFIG_ARC_MEMORY)	+= memory.o
 lib-$(CONFIG_ARC_CONSOLE)	+= arc_con.o

arch/mips/fw/arc/cmdline.c

@@ -17,6 +17,12 @@
 
 #undef DEBUG_CMDLINE
 
+/*
+ * A 32-bit ARC PROM pass arguments and environment as 32-bit pointer.
+ * These macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *) (long)argv[(index)])
+
 static char *ignored[] = {
 	"ConsoleIn=",
 	"ConsoleOut=",
@@ -32,14 +38,14 @@ static char *used_arc[][2] = {
 	{ "OSLoadOptions=", "" }
 };
 
-static char * __init move_firmware_args(char* cp)
+static char __init *move_firmware_args(int argc, LONG *argv, char *cp)
 {
 	char *s;
 	int actr, i;
 
 	actr = 1; /* Always ignore argv[0] */
 
-	while (actr < prom_argc) {
+	while (actr < argc) {
 		for(i = 0; i < ARRAY_SIZE(used_arc); i++) {
 			int len = strlen(used_arc[i][0]);
 
@@ -64,7 +70,7 @@ static char * __init move_firmware_args(char* cp)
 	return cp;
 }
 
-void __init prom_init_cmdline(void)
+void __init prom_init_cmdline(int argc, LONG *argv)
 {
 	char *cp;
 	int actr, i;
@@ -76,9 +82,9 @@ void __init prom_init_cmdline(void)
 	 * Move ARC variables to the beginning to make sure they can be
 	 * overridden by later arguments.
 	 */
-	cp = move_firmware_args(cp);
+	cp = move_firmware_args(argc, argv, cp);
 
-	while (actr < prom_argc) {
+	while (actr < argc) {
 		for (i = 0; i < ARRAY_SIZE(ignored); i++) {
 			int len = strlen(ignored[i]);
 

arch/mips/fw/arc/env.c

@@ -19,9 +19,3 @@ ArcGetEnvironmentVariable(CHAR *name)
 {
 	return (CHAR *) ARC_CALL1(get_evar, name);
 }
-
-LONG __init
-ArcSetEnvironmentVariable(PCHAR name, PCHAR value)
-{
-	return ARC_CALL2(set_evar, name, value);
-}

arch/mips/fw/arc/file.c

@@ -12,63 +12,14 @@
 #include <asm/fw/arc/types.h>
 #include <asm/sgialib.h>
 
-LONG
-ArcGetDirectoryEntry(ULONG FileID, struct linux_vdirent *Buffer,
-		     ULONG N, ULONG *Count)
-{
-	return ARC_CALL4(get_vdirent, FileID, Buffer, N, Count);
-}
-
-LONG
-ArcOpen(CHAR *Path, enum linux_omode OpenMode, ULONG *FileID)
-{
-	return ARC_CALL3(open, Path, OpenMode, FileID);
-}
-
-LONG
-ArcClose(ULONG FileID)
-{
-	return ARC_CALL1(close, FileID);
-}
-
 LONG
 ArcRead(ULONG FileID, VOID *Buffer, ULONG N, ULONG *Count)
 {
 	return ARC_CALL4(read, FileID, Buffer, N, Count);
 }
 
-LONG
-ArcGetReadStatus(ULONG FileID)
-{
-	return ARC_CALL1(get_rstatus, FileID);
-}
-
 LONG
 ArcWrite(ULONG FileID, PVOID Buffer, ULONG N, PULONG Count)
 {
 	return ARC_CALL4(write, FileID, Buffer, N, Count);
 }
-
-LONG
-ArcSeek(ULONG FileID, struct linux_bigint *Position, enum linux_seekmode SeekMode)
-{
-	return ARC_CALL3(seek, FileID, Position, SeekMode);
-}
-
-LONG
-ArcMount(char *name, enum linux_mountops op)
-{
-	return ARC_CALL2(mount, name, op);
-}
-
-LONG
-ArcGetFileInformation(ULONG FileID, struct linux_finfo *Information)
-{
-	return ARC_CALL2(get_finfo, FileID, Information);
-}
-
-LONG ArcSetFileInformation(ULONG FileID, ULONG AttributeFlags,
-			   ULONG AttributeMask)
-{
-	return ARC_CALL3(set_finfo, FileID, AttributeFlags, AttributeMask);
-}

arch/mips/fw/arc/identify.c

@@ -31,10 +31,6 @@ static struct smatch mach_table[] = {
 		.arcname	= "SGI-IP22",
 		.liname		= "SGI Indy",
 		.flags		= PROM_FLAG_ARCS,
-	}, {
-		.arcname	= "SGI-IP27",
-		.liname		= "SGI Origin",
-		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP28",
 		.liname		= "SGI IP28",
@@ -87,6 +83,11 @@ const char *get_system_type(void)
 	return system_type;
 }
 
+static pcomponent * __init ArcGetChild(pcomponent *Current)
+{
+	return (pcomponent *) ARC_CALL1(child_component, Current);
+}
+
 void __init prom_identify_arch(void)
 {
 	pcomponent *p;
@@ -98,13 +99,7 @@ void __init prom_identify_arch(void)
 	 */
 	p = ArcGetChild(PROM_NULL_COMPONENT);
 	if (p == NULL) {
-#ifdef CONFIG_SGI_IP27
-		/* IP27 PROM misbehaves, seems to not implement ARC
-		   GetChild().	So we just assume it's an IP27.	 */
-		iname = "SGI-IP27";
-#else
 		iname = "Unknown";
-#endif
 	} else
 		iname = (char *) (long) p->iname;
 

arch/mips/fw/arc/init.c

@@ -18,8 +18,11 @@
 
 /* Master romvec interface. */
 struct linux_romvec *romvec;
-int prom_argc;
-LONG *_prom_argv, *_prom_envp;
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32)
+/* stack for calling 32bit ARC prom */
+u64 o32_stk[4096];
+#endif
 
 void __init prom_init(void)
 {
@@ -27,10 +30,6 @@ void __init prom_init(void)
 
 	romvec = ROMVECTOR;
 
-	prom_argc = fw_arg0;
-	_prom_argv = (LONG *) fw_arg1;
-	_prom_envp = (LONG *) fw_arg2;
-
 	if (pb->magic != 0x53435241) {
 		printk(KERN_CRIT "Aieee, bad prom vector magic %08lx\n",
 		       (unsigned long) pb->magic);
@@ -38,7 +37,7 @@ void __init prom_init(void)
 			;
 	}
 
-	prom_init_cmdline();
+	prom_init_cmdline(fw_arg0, (LONG *)fw_arg1);
 	prom_identify_arch();
 	printk(KERN_INFO "PROMLIB: ARC firmware Version %d Revision %d\n",
 	       pb->ver, pb->rev);
@@ -49,11 +48,4 @@ void __init prom_init(void)
 	ArcRead(0, &c, 1, &cnt);
 	ArcEnterInteractiveMode();
 #endif
-#ifdef CONFIG_SGI_IP27
-	{
-		extern const struct plat_smp_ops ip27_smp_ops;
-
-		register_smp_ops(&ip27_smp_ops);
-	}
-#endif
 }

arch/mips/fw/arc/memory.c

@@ -158,6 +158,10 @@ void __init prom_meminit(void)
 	}
 }
 
+void __weak __init prom_cleanup(void)
+{
+}
+
 void __init prom_free_prom_memory(void)
 {
 	int i;
@@ -169,4 +173,9 @@ void __init prom_free_prom_memory(void)
 		free_init_pages("prom memory",
 			prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]);
 	}
+	/*
+	 * at this point it isn't safe to call PROM functions
+	 * give platforms a way to do PROM cleanups
+	 */
+	prom_cleanup();
 }

arch/mips/fw/arc/misc.c

@@ -20,47 +20,6 @@
 #include <asm/sgialib.h>
 #include <asm/bootinfo.h>
 
-VOID __noreturn
-ArcHalt(VOID)
-{
-	bc_disable();
-	local_irq_disable();
-	ARC_CALL0(halt);
-
-	unreachable();
-}
-
-VOID __noreturn
-ArcPowerDown(VOID)
-{
-	bc_disable();
-	local_irq_disable();
-	ARC_CALL0(pdown);
-
-	unreachable();
-}
-
-/* XXX is this a soft reset basically? XXX */
-VOID __noreturn
-ArcRestart(VOID)
-{
-	bc_disable();
-	local_irq_disable();
-	ARC_CALL0(restart);
-
-	unreachable();
-}
-
-VOID __noreturn
-ArcReboot(VOID)
-{
-	bc_disable();
-	local_irq_disable();
-	ARC_CALL0(reboot);
-
-	unreachable();
-}
-
 VOID __noreturn
 ArcEnterInteractiveMode(VOID)
 {
@@ -71,24 +30,6 @@ ArcEnterInteractiveMode(VOID)
 	unreachable();
 }
 
-LONG
-ArcSaveConfiguration(VOID)
-{
-	return ARC_CALL0(cfg_save);
-}
-
-struct linux_sysid *
-ArcGetSystemId(VOID)
-{
-	return (struct linux_sysid *) ARC_CALL0(get_sysid);
-}
-
-VOID __init
-ArcFlushAllCaches(VOID)
-{
-	ARC_CALL0(cache_flush);
-}
-
 DISPLAY_STATUS * __init ArcGetDisplayStatus(ULONG FileID)
 {
 	return (DISPLAY_STATUS *) ARC_CALL1(GetDisplayStatus, FileID);

arch/mips/fw/arc/promlib.c

@@ -11,6 +11,21 @@
 #include <asm/bcache.h>
 #include <asm/setup.h>
 
+#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32)
+/*
+ * For 64bit kernels working with a 32bit ARC PROM pointer arguments
+ * for ARC calls need to reside in CKEG0/1. But as soon as the kernel
+ * switches to it's first kernel thread stack is set to an address in
+ * XKPHYS, so anything on stack can't be used anymore. This is solved
+ * by using a * static declartion variables are put into BSS, which is
+ * linked to a CKSEG0 address. Since this is only used on UP platforms
+ * there is not spinlock needed
+ */
+#define O32_STATIC	static
+#else
+#define O32_STATIC
+#endif
+
 /*
  * IP22 boardcache is not compatible with board caches.	 Thus we disable it
  * during romvec action.  Since r4xx0.c is always compiled and linked with your
@@ -23,8 +38,10 @@
 
 void prom_putchar(char c)
 {
-	ULONG cnt;
-	CHAR it = c;
+	O32_STATIC ULONG cnt;
+	O32_STATIC CHAR it;
+
+	it = c;
 
 	bc_disable();
 	ArcWrite(1, &it, 1, &cnt);
@@ -33,8 +50,8 @@ void prom_putchar(char c)
 
 char prom_getchar(void)
 {
-	ULONG cnt;
-	CHAR c;
+	O32_STATIC ULONG cnt;
+	O32_STATIC CHAR c;
 
 	bc_disable();
 	ArcRead(0, &c, 1, &cnt);

arch/mips/fw/arc/salone.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * Routines to load into memory and execute stand-along program images using
- * ARCS PROM firmware.
- *
- * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- */
-#include <linux/init.h>
-#include <asm/sgialib.h>
-
-LONG __init ArcLoad(CHAR *Path, ULONG TopAddr, ULONG *ExecAddr, ULONG *LowAddr)
-{
-	return ARC_CALL4(load, Path, TopAddr, ExecAddr, LowAddr);
-}
-
-LONG __init ArcInvoke(ULONG ExecAddr, ULONG StackAddr, ULONG Argc, CHAR *Argv[],
-	CHAR *Envp[])
-{
-	return ARC_CALL5(invoke, ExecAddr, StackAddr, Argc, Argv, Envp);
-}
-
-LONG __init ArcExecute(CHAR *Path, LONG Argc, CHAR *Argv[], CHAR *Envp[])
-{
-	return ARC_CALL4(exec, Path, Argc, Argv, Envp);
-}

arch/mips/fw/arc/time.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Extracting time information from ARCS prom.
- *
- * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- */
-#include <linux/init.h>
-
-#include <asm/fw/arc/types.h>
-#include <asm/sgialib.h>
-
-struct linux_tinfo * __init
-ArcGetTime(VOID)
-{
-	return (struct linux_tinfo *) ARC_CALL0(get_tinfo);
-}
-
-ULONG __init
-ArcGetRelativeTime(VOID)
-{
-	return ARC_CALL0(get_rtime);
-}

arch/mips/fw/arc/tree.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * PROM component device tree code.
- *
- * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#include <linux/init.h>
-#include <asm/fw/arc/types.h>
-#include <asm/sgialib.h>
-
-#undef DEBUG_PROM_TREE
-
-pcomponent * __init
-ArcGetPeer(pcomponent *Current)
-{
-	if (Current == PROM_NULL_COMPONENT)
-		return PROM_NULL_COMPONENT;
-
-	return (pcomponent *) ARC_CALL1(next_component, Current);
-}
-
-pcomponent * __init
-ArcGetChild(pcomponent *Current)
-{
-	return (pcomponent *) ARC_CALL1(child_component, Current);
-}
-
-pcomponent * __init
-ArcGetParent(pcomponent *Current)
-{
-	if (Current == PROM_NULL_COMPONENT)
-		return PROM_NULL_COMPONENT;
-
-	return (pcomponent *) ARC_CALL1(parent_component, Current);
-}
-
-LONG __init
-ArcGetConfigurationData(VOID *Buffer, pcomponent *Current)
-{
-	return ARC_CALL2(component_data, Buffer, Current);
-}
-
-pcomponent * __init
-ArcAddChild(pcomponent *Current, pcomponent *Template, VOID *ConfigurationData)
-{
-	return (pcomponent *)
-	       ARC_CALL3(child_add, Current, Template, ConfigurationData);
-}
-
-LONG __init
-ArcDeleteComponent(pcomponent *ComponentToDelete)
-{
-	return ARC_CALL1(comp_del, ComponentToDelete);
-}
-
-pcomponent * __init
-ArcGetComponent(CHAR *Path)
-{
-	return (pcomponent *)ARC_CALL1(component_by_path, Path);
-}
-
-#ifdef DEBUG_PROM_TREE
-
-static char *classes[] = {
-	"system", "processor", "cache", "adapter", "controller", "peripheral",
-	"memory"
-};
-
-static char *types[] = {
-	"arc", "cpu", "fpu", "picache", "pdcache", "sicache", "sdcache",
-	"sccache", "memdev", "eisa adapter", "tc adapter", "scsi adapter",
-	"dti adapter", "multi-func adapter", "disk controller",
-	"tp controller", "cdrom controller", "worm controller",
-	"serial controller", "net controller", "display controller",
-	"parallel controller", "pointer controller", "keyboard controller",
-	"audio controller", "misc controller", "disk peripheral",
-	"floppy peripheral", "tp peripheral", "modem peripheral",
-	"monitor peripheral", "printer peripheral", "pointer peripheral",
-	"keyboard peripheral", "terminal peripheral", "line peripheral",
-	"net peripheral", "misc peripheral", "anonymous"
-};
-
-static char *iflags[] = {
-	"bogus", "read only", "removable", "console in", "console out",
-	"input", "output"
-};
-
-static void __init
-dump_component(pcomponent *p)
-{
-	printk("[%p]:class<%s>type<%s>flags<%s>ver<%d>rev<%d>",
-	       p, classes[p->class], types[p->type],
-	       iflags[p->iflags], p->vers, p->rev);
-	printk("key<%08lx>\n\tamask<%08lx>cdsize<%d>ilen<%d>iname<%s>\n",
-	       p->key, p->amask, (int)p->cdsize, (int)p->ilen, p->iname);
-}
-
-static void __init
-traverse(pcomponent *p, int op)
-{
-	dump_component(p);
-	if(ArcGetChild(p))
-		traverse(ArcGetChild(p), 1);
-	if(ArcGetPeer(p) && op)
-		traverse(ArcGetPeer(p), 1);
-}
-
-void __init
-prom_testtree(void)
-{
-	pcomponent *p;
-
-	p = ArcGetChild(PROM_NULL_COMPONENT);
-	dump_component(p);
-	p = ArcGetChild(p);
-	while(p) {
-		dump_component(p);
-		p = ArcGetPeer(p);
-	}
-}
-
-#endif /* DEBUG_PROM_TREE  */

arch/mips/generic/init.c

@@ -20,9 +20,9 @@
 #include <asm/smp-ops.h>
 #include <asm/time.h>
 
-static __initdata const void *fdt;
-static __initdata const struct mips_machine *mach;
-static __initdata const void *mach_match_data;
+static __initconst const void *fdt;
+static __initconst const struct mips_machine *mach;
+static __initconst const void *mach_match_data;
 
 void __init prom_init(void)
 {

arch/mips/include/asm/bootinfo.h

@@ -61,7 +61,7 @@
 /*
  * Valid machtype for Loongson family
  */
-enum loongson_machine_type {
+enum loongson2ef_machine_type {
 	MACH_LOONGSON_UNKNOWN,
 	MACH_LEMOTE_FL2E,
 	MACH_LEMOTE_FL2F,
@@ -70,7 +70,6 @@ enum loongson_machine_type {
 	MACH_DEXXON_GDIUM2F10,
 	MACH_LEMOTE_NAS,
 	MACH_LEMOTE_LL2F,
-	MACH_LOONGSON_GENERIC,
 	MACH_LOONGSON_END
 };
 
@@ -99,6 +98,7 @@ extern void detect_memory_region(phys_addr_t start, phys_addr_t sz_min,  phys_ad
 
 extern void prom_init(void);
 extern void prom_free_prom_memory(void);
+extern void prom_cleanup(void);
 
 extern void free_init_pages(const char *what,
 			    unsigned long begin, unsigned long end);

arch/mips/include/asm/bugs.h

@@ -26,9 +26,8 @@ extern void check_bugs64(void);
 
 static inline void check_bugs_early(void)
 {
-#ifdef CONFIG_64BIT
-	check_bugs64_early();
-#endif
+	if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
+		check_bugs64_early();
 }
 
 static inline void check_bugs(void)
@@ -37,19 +36,18 @@ static inline void check_bugs(void)
 
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 	check_bugs32();
-#ifdef CONFIG_64BIT
-	check_bugs64();
-#endif
+
+	if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
+		check_bugs64();
 }
 
 static inline int r4k_daddiu_bug(void)
 {
-#ifdef CONFIG_64BIT
+	if (!IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
+		return 0;
+
 	WARN_ON(daddiu_bug < 0);
 	return daddiu_bug != 0;
-#else
-	return 0;
-#endif
 }
 
 #endif /* _ASM_BUGS_H */

arch/mips/include/asm/cmpxchg.h

@@ -11,19 +11,10 @@
 #include <linux/bug.h>
 #include <linux/irqflags.h>
 #include <asm/compiler.h>
+#include <asm/llsc.h>
+#include <asm/sync.h>
 #include <asm/war.h>
 
-/*
- * Using a branch-likely instruction to check the result of an sc instruction
- * works around a bug present in R10000 CPUs prior to revision 3.0 that could
- * cause ll-sc sequences to execute non-atomically.
- */
-#if R10000_LLSC_WAR
-# define __scbeqz "beqzl"
-#else
-# define __scbeqz "beqz"
-#endif
-
 /*
  * These functions doesn't exist, so if they are called you'll either:
  *
@@ -46,18 +37,18 @@ extern unsigned long __xchg_called_with_bad_pointer(void)
 	__typeof(*(m)) __ret;						\
 									\
 	if (kernel_uses_llsc) {						\
-		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
 		"	.set	push				\n"	\
 		"	.set	" MIPS_ISA_ARCH_LEVEL "		\n"	\
+		"	" __SYNC(full, loongson3_war) "		\n"	\
 		"1:	" ld "	%0, %2		# __xchg_asm	\n"	\
 		"	.set	pop				\n"	\
 		"	move	$1, %z3				\n"	\
 		"	.set	" MIPS_ISA_ARCH_LEVEL "		\n"	\
 		"	" st "	$1, %1				\n"	\
-		"\t" __scbeqz "	$1, 1b				\n"	\
+		"\t" __SC_BEQZ	"$1, 1b				\n"	\
 		"	.set	pop				\n"	\
 		: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m)		\
 		: GCC_OFF_SMALL_ASM() (*m), "Jr" (val)			\
@@ -103,7 +94,13 @@ unsigned long __xchg(volatile void *ptr, unsigned long x, int size)
 ({									\
 	__typeof__(*(ptr)) __res;					\
 									\
-	smp_mb__before_llsc();						\
+	/*								\
+	 * In the Loongson3 workaround case __xchg_asm() already	\
+	 * contains a completion barrier prior to the LL, so we don't	\
+	 * need to emit an extra one here.				\
+	 */								\
+	if (!__SYNC_loongson3_war)					\
+		smp_mb__before_llsc();					\
 									\
 	__res = (__typeof__(*(ptr)))					\
 		__xchg((ptr), (unsigned long)(x), sizeof(*(ptr)));	\
@@ -118,25 +115,24 @@ unsigned long __xchg(volatile void *ptr, unsigned long x, int size)
 	__typeof(*(m)) __ret;						\
 									\
 	if (kernel_uses_llsc) {						\
-		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
 		"	.set	push				\n"	\
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"	\
+		"	" __SYNC(full, loongson3_war) "		\n"	\
 		"1:	" ld "	%0, %2		# __cmpxchg_asm \n"	\
 		"	bne	%0, %z3, 2f			\n"	\
 		"	.set	pop				\n"	\
 		"	move	$1, %z4				\n"	\
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"	\
 		"	" st "	$1, %1				\n"	\
-		"\t" __scbeqz "	$1, 1b				\n"	\
+		"\t" __SC_BEQZ	"$1, 1b				\n"	\
 		"	.set	pop				\n"	\
-		"2:						\n"	\
+		"2:	" __SYNC(full, loongson3_war) "		\n"	\
 		: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m)		\
 		: GCC_OFF_SMALL_ASM() (*m), "Jr" (old), "Jr" (new)	\
 		: __LLSC_CLOBBER);					\
-		loongson_llsc_mb();					\
 	} else {							\
 		unsigned long __flags;					\
 									\
@@ -190,9 +186,23 @@ unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 ({									\
 	__typeof__(*(ptr)) __res;					\
 									\
-	smp_mb__before_llsc();						\
+	/*								\
+	 * In the Loongson3 workaround case __cmpxchg_asm() already	\
+	 * contains a completion barrier prior to the LL, so we don't	\
+	 * need to emit an extra one here.				\
+	 */								\
+	if (!__SYNC_loongson3_war)					\
+		smp_mb__before_llsc();					\
+									\
 	__res = cmpxchg_local((ptr), (old), (new));			\
-	smp_llsc_mb();							\
+									\
+	/*								\
+	 * In the Loongson3 workaround case __cmpxchg_asm() already	\
+	 * contains a completion barrier after the SC, so we don't	\
+	 * need to emit an extra one here.				\
+	 */								\
+	if (!__SYNC_loongson3_war)					\
+		smp_llsc_mb();						\
 									\
 	__res;								\
 })
@@ -233,11 +243,11 @@ static inline unsigned long __cmpxchg64(volatile void *ptr,
 	 */
 	local_irq_save(flags);
 
-	loongson_llsc_mb();
 	asm volatile(
 	"	.set	push				\n"
 	"	.set	" MIPS_ISA_ARCH_LEVEL "		\n"
 	/* Load 64 bits from ptr */
+	"	" __SYNC(full, loongson3_war) "		\n"
 	"1:	lld	%L0, %3		# __cmpxchg64	\n"
 	/*
 	 * Split the 64 bit value we loaded into the 2 registers that hold the
@@ -269,9 +279,9 @@ static inline unsigned long __cmpxchg64(volatile void *ptr,
 	/* Attempt to store new at ptr */
 	"	scd	%L1, %2				\n"
 	/* If we failed, loop! */
-	"\t" __scbeqz "	%L1, 1b				\n"
+	"\t" __SC_BEQZ "%L1, 1b				\n"
 	"	.set	pop				\n"
-	"2:						\n"
+	"2:	" __SYNC(full, loongson3_war) "		\n"
 	: "=&r"(ret),
 	  "=&r"(tmp),
 	  "=" GCC_OFF_SMALL_ASM() (*(unsigned long long *)ptr)
@@ -279,7 +289,6 @@ static inline unsigned long __cmpxchg64(volatile void *ptr,
 	  "r" (old),
 	  "r" (new)
 	: "memory");
-	loongson_llsc_mb();
 
 	local_irq_restore(flags);
 	return ret;
@@ -312,6 +321,4 @@ static inline unsigned long __cmpxchg64(volatile void *ptr,
 # endif /* !CONFIG_SMP */
 #endif /* !CONFIG_64BIT */
 
-#undef __scbeqz
-
 #endif /* __ASM_CMPXCHG_H */

arch/mips/include/asm/cop2.h

@@ -33,7 +33,7 @@ extern void nlm_cop2_restore(struct nlm_cop2_state *);
 #define cop2_present		1
 #define cop2_lazy_restore	0
 
-#elif defined(CONFIG_CPU_LOONGSON3)
+#elif defined(CONFIG_CPU_LOONGSON64)
 
 #define cop2_present		1
 #define cop2_lazy_restore	1

arch/mips/include/asm/cpu-type.h

@@ -15,18 +15,17 @@
 static inline int __pure __get_cpu_type(const int cpu_type)
 {
 	switch (cpu_type) {
-#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \
-    defined(CONFIG_SYS_HAS_CPU_LOONGSON2F)
-	case CPU_LOONGSON2:
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2EF)
+	case CPU_LOONGSON2EF:
 #endif
 
-#ifdef CONFIG_SYS_HAS_CPU_LOONGSON3
-	case CPU_LOONGSON3:
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON64
+	case CPU_LOONGSON64:
 #endif
 
 #if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
     defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
-	case CPU_LOONGSON1:
+	case CPU_LOONGSON32:
 #endif
 
 #ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1

arch/mips/include/asm/cpu.h

@@ -91,7 +91,9 @@
 #define PRID_IMP_LOONGSON_32	0x4200  /* Loongson-1 */
 #define PRID_IMP_R5432		0x5400
 #define PRID_IMP_R5500		0x5500
-#define PRID_IMP_LOONGSON_64	0x6300  /* Loongson-2/3 */
+#define PRID_IMP_LOONGSON_64R	0x6100  /* Reduced Loongson-2 */
+#define PRID_IMP_LOONGSON_64C	0x6300  /* Classic Loongson-2 and Loongson-3 */
+#define PRID_IMP_LOONGSON_64G	0xc000  /* Generic Loongson-2 and Loongson-3 */
 
 #define PRID_IMP_UNKNOWN	0xff00
 
@@ -310,15 +312,15 @@ enum cpu_type_enum {
 	 */
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
-	CPU_BMIPS4380, CPU_BMIPS5000, CPU_XBURST, CPU_LOONGSON1, CPU_M14KC,
+	CPU_BMIPS4380, CPU_BMIPS5000, CPU_XBURST, CPU_LOONGSON32, CPU_M14KC,
 	CPU_M14KEC, CPU_INTERAPTIV, CPU_P5600, CPU_PROAPTIV, CPU_1074K,
 	CPU_M5150, CPU_I6400, CPU_P6600, CPU_M6250,
 
 	/*
 	 * MIPS64 class processors
 	 */
-	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
-	CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
+	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2EF,
+	CPU_LOONGSON64, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
 	CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP, CPU_I6500,
 
 	CPU_QEMU_GENERIC,

arch/mips/include/asm/fixmap.h

@@ -70,7 +70,7 @@ enum fixed_addresses {
 #include <asm-generic/fixmap.h>
 
 #define kmap_get_fixmap_pte(vaddr)					\
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+	pte_offset_kernel(pmd_offset(pud_offset(p4d_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)), (vaddr))
 
 /*
  * Called from pgtable_init()

arch/mips/include/asm/futex.h

@@ -16,6 +16,7 @@
 #include <asm/barrier.h>
 #include <asm/compiler.h>
 #include <asm/errno.h>
+#include <asm/sync.h>
 #include <asm/war.h>
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)		\
@@ -32,7 +33,7 @@
 		"	.set	arch=r4000			\n"	\
 		"2:	sc	$1, %2				\n"	\
 		"	beqzl	$1, 1b				\n"	\
-		__WEAK_LLSC_MB						\
+		__stringify(__WEAK_LLSC_MB) "			\n"	\
 		"3:						\n"	\
 		"	.insn					\n"	\
 		"	.set	pop				\n"	\
@@ -50,19 +51,19 @@
 		  "i" (-EFAULT)						\
 		: "memory");						\
 	} else if (cpu_has_llsc) {					\
-		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
 		"	.set	push				\n"	\
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"	\
+		"	" __SYNC(full, loongson3_war) "		\n"	\
 		"1:	"user_ll("%1", "%4")" # __futex_atomic_op\n"	\
 		"	.set	pop				\n"	\
 		"	" insn	"				\n"	\
 		"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"	\
 		"2:	"user_sc("$1", "%2")"			\n"	\
 		"	beqz	$1, 1b				\n"	\
-		__WEAK_LLSC_MB						\
+		__stringify(__WEAK_LLSC_MB) "			\n"	\
 		"3:						\n"	\
 		"	.insn					\n"	\
 		"	.set	pop				\n"	\
@@ -147,7 +148,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		"	.set	arch=r4000				\n"
 		"2:	sc	$1, %2					\n"
 		"	beqzl	$1, 1b					\n"
-		__WEAK_LLSC_MB
+		__stringify(__WEAK_LLSC_MB) "				\n"
 		"3:							\n"
 		"	.insn						\n"
 		"	.set	pop					\n"
@@ -164,13 +165,13 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		  "i" (-EFAULT)
 		: "memory");
 	} else if (cpu_has_llsc) {
-		loongson_llsc_mb();
 		__asm__ __volatile__(
 		"# futex_atomic_cmpxchg_inatomic			\n"
 		"	.set	push					\n"
 		"	.set	noat					\n"
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
+		"	" __SYNC(full, loongson3_war) "			\n"
 		"1:	"user_ll("%1", "%3")"				\n"
 		"	bne	%1, %z4, 3f				\n"
 		"	.set	pop					\n"
@@ -178,8 +179,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
 		"2:	"user_sc("$1", "%2")"				\n"
 		"	beqz	$1, 1b					\n"
-		__WEAK_LLSC_MB
-		"3:							\n"
+		"3:	" __SYNC_ELSE(full, loongson3_war, __WEAK_LLSC_MB) "\n"
 		"	.insn						\n"
 		"	.set	pop					\n"
 		"	.section .fixup,\"ax\"				\n"
@@ -194,7 +194,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		: GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
 		  "i" (-EFAULT)
 		: "memory");
-		loongson_llsc_mb();
 	} else
 		return -ENOSYS;
 

arch/mips/include/asm/hazards.h

@@ -158,7 +158,7 @@ do {									\
 } while (0)
 
 #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-	defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_LOONGSON3_ENHANCEMENT) || \
+	defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_LOONGSON3_ENHANCEMENT) || \
 	defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR)
 
 /*

arch/mips/include/asm/io.h

@@ -306,7 +306,7 @@ static inline void iounmap(const volatile void __iomem *addr)
 #undef __IS_KSEG1
 }
 
-#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON3)
+#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64)
 #define war_io_reorder_wmb()		wmb()
 #else
 #define war_io_reorder_wmb()		barrier()

arch/mips/include/asm/irqflags.h

@@ -41,7 +41,7 @@ static inline unsigned long arch_local_irq_save(void)
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#if defined(CONFIG_CPU_LOONGSON3) || defined (CONFIG_CPU_LOONGSON1)
+#if defined(CONFIG_CPU_LOONGSON64) || defined(CONFIG_CPU_LOONGSON32)
 	"	mfc0	%[flags], $12					\n"
 	"	di							\n"
 #else

arch/mips/include/asm/llsc.h

@@ -9,20 +9,31 @@
 #ifndef __ASM_LLSC_H
 #define __ASM_LLSC_H
 
+#include <asm/isa-rev.h>
+
 #if _MIPS_SZLONG == 32
-#define SZLONG_LOG 5
-#define SZLONG_MASK 31UL
 #define __LL		"ll	"
 #define __SC		"sc	"
 #define __INS		"ins	"
 #define __EXT		"ext	"
 #elif _MIPS_SZLONG == 64
-#define SZLONG_LOG 6
-#define SZLONG_MASK 63UL
 #define __LL		"lld	"
 #define __SC		"scd	"
 #define __INS		"dins	"
 #define __EXT		"dext	"
 #endif
 
+/*
+ * Using a branch-likely instruction to check the result of an sc instruction
+ * works around a bug present in R10000 CPUs prior to revision 3.0 that could
+ * cause ll-sc sequences to execute non-atomically.
+ */
+#if R10000_LLSC_WAR
+# define __SC_BEQZ "beqzl	"
+#elif MIPS_ISA_REV >= 6
+# define __SC_BEQZ "beqzc	"
+#else
+# define __SC_BEQZ "beqz	"
+#endif
+
 #endif /* __ASM_LLSC_H  */

arch/mips/include/asm/mach-ip22/spaces.h

@@ -10,17 +10,7 @@
 #ifndef _ASM_MACH_IP22_SPACES_H
 #define _ASM_MACH_IP22_SPACES_H
 
-
-#ifdef CONFIG_64BIT
-
-#define PAGE_OFFSET		0xffffffff80000000UL
-
-#define CAC_BASE		0xffffffff80000000
-#define IO_BASE			0xffffffffa0000000
-#define UNCAC_BASE		0xffffffffa0000000
-#define MAP_BASE		0xc000000000000000
-
-#endif /* CONFIG_64BIT */
+#define PHYS_OFFSET     _AC(0x08000000, UL)
 
 #include <asm/mach-generic/spaces.h>
 

arch/mips/include/asm/mach-ip27/mmzone.h

@@ -6,7 +6,7 @@
 #include <asm/sn/arch.h>
 #include <asm/sn/hub.h>
 
-#define pa_to_nid(addr)		NASID_TO_COMPACT_NODEID(NASID_GET(addr))
+#define pa_to_nid(addr)		NASID_GET(addr)
 
 struct hub_data {
 	kern_vars_t	kern_vars;

arch/mips/include/asm/mach-ip27/topology.h

@@ -7,14 +7,13 @@
 #include <asm/mmzone.h>
 
 struct cpuinfo_ip27 {
-	cnodeid_t	p_nodeid;	/* my node ID in compact-id-space */
 	nasid_t		p_nasid;	/* my node ID in numa-as-id-space */
 	unsigned char	p_slice;	/* Physical position on node board */
 };
 
 extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 
-#define cpu_to_node(cpu)	(sn_cpu_info[(cpu)].p_nodeid)
+#define cpu_to_node(cpu)	(cputonasid(cpu))
 #define cpumask_of_node(node)	((node) == -1 ?				\
 				 cpu_all_mask :				\
 				 &hub_data(node)->h_cpus)
@@ -23,7 +22,7 @@ extern int pcibus_to_node(struct pci_bus *);
 
 #define cpumask_of_pcibus(bus)	(cpumask_of_node(pcibus_to_node(bus)))
 
-extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
+extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
 
 #define node_distance(from, to) (__node_distances[(from)][(to)])
 

arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * IP30/Octane cpu-features overrides.
+ *
+ * Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org>
+ *		 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
+ *		 2009 Johannes Dickgreber <tanzy@gmx.de>
+ *		 2015 Joshua Kinard <kumba@gentoo.org>
+ *
+ */
+#ifndef __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H
+
+#include <asm/cpu.h>
+
+/*
+ * IP30 only supports R1[024]000 processors, all using the same config
+ */
+#define cpu_has_tlb			1
+#define cpu_has_tlbinv			0
+#define cpu_has_segments		0
+#define cpu_has_eva			0
+#define cpu_has_htw			0
+#define cpu_has_rixiex			0
+#define cpu_has_maar			0
+#define cpu_has_rw_llb			0
+#define cpu_has_3kex			0
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_6k_cache		0
+#define cpu_has_8k_cache		0
+#define cpu_has_tx39_cache		0
+#define cpu_has_fpu			1
+#define cpu_has_nofpuex			0
+#define cpu_has_32fpr			1
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_64bits			1
+#define cpu_has_divec			0
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			0
+#define cpu_has_ejtag			0
+#define cpu_has_llsc			1
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+#define cpu_has_rixi			0
+#define cpu_has_xpa			0
+#define cpu_has_vtag_icache		0
+#define cpu_has_dc_aliases		0
+#define cpu_has_ic_fills_f_dc		0
+
+#define cpu_icache_snoops_remote_store	1
+
+#define cpu_has_mips32r1		0
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+#define cpu_has_mips32r6		0
+#define cpu_has_mips64r6		0
+
+#define cpu_has_dsp			0
+#define cpu_has_dsp2			0
+#define cpu_has_mipsmt			0
+#define cpu_has_userlocal		0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_hwrena_impl_bits		0
+#define cpu_has_perf_cntr_intr_bit	0
+#define cpu_has_vz			0
+#define cpu_has_fre			0
+#define cpu_has_cdmm			0
+
+#define cpu_dcache_line_size()		32
+#define cpu_icache_line_size()		64
+#define cpu_scache_line_size()		128
+
+#endif /* __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H */
+

arch/mips/include/asm/mach-ip30/irq.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * HEART IRQ defines
+ *
+ * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
+ *		 2014-2016 Joshua Kinard <kumba@gentoo.org>
+ *
+ */
+
+#ifndef __ASM_MACH_IP30_IRQ_H
+#define __ASM_MACH_IP30_IRQ_H
+
+/*
+ * HEART has 64 hardware interrupts, but use 128 to leave room for a few
+ * software interrupts as well (such as the CPU timer interrupt.
+ */
+#define NR_IRQS				128
+
+extern void __init ip30_install_ipi(void);
+
+/*
+ * HEART has 64 interrupt vectors available to it, subdivided into five
+ * priority levels.  They are numbered 0 to 63.
+ */
+#define HEART_NUM_IRQS			64
+
+/*
+ * These are the five interrupt priority levels and their corresponding
+ * CPU IPx interrupt pins.
+ *
+ * Level 4 - Error Interrupts.
+ * Level 3 - HEART timer interrupt.
+ * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts.
+ * Level 1 - General device interrupts.
+ * Level 0 - General device GFX flow control interrupts.
+ */
+#define HEART_L4_INT_MASK		0xfff8000000000000ULL	/* IP6 */
+#define HEART_L3_INT_MASK		0x0004000000000000ULL	/* IP5 */
+#define HEART_L2_INT_MASK		0x0003ffff00000000ULL	/* IP4 */
+#define HEART_L1_INT_MASK		0x00000000ffff0000ULL	/* IP3 */
+#define HEART_L0_INT_MASK		0x000000000000ffffULL	/* IP2 */
+
+/* HEART L0 Interrupts (Low Priority) */
+#define HEART_L0_INT_GENERIC		 0
+#define HEART_L0_INT_FLOW_CTRL_HWTR_0	 1
+#define HEART_L0_INT_FLOW_CTRL_HWTR_1	 2
+
+/* HEART L2 Interrupts (High Priority) */
+#define HEART_L2_INT_RESCHED_CPU_0	46
+#define HEART_L2_INT_RESCHED_CPU_1	47
+#define HEART_L2_INT_CALL_CPU_0		48
+#define HEART_L2_INT_CALL_CPU_1		49
+
+/* HEART L3 Interrupts (Compare/Counter Timer) */
+#define HEART_L3_INT_TIMER		50
+
+/* HEART L4 Interrupts (Errors) */
+#define HEART_L4_INT_XWID_ERR_9		51
+#define HEART_L4_INT_XWID_ERR_A		52
+#define HEART_L4_INT_XWID_ERR_B		53
+#define HEART_L4_INT_XWID_ERR_C		54
+#define HEART_L4_INT_XWID_ERR_D		55
+#define HEART_L4_INT_XWID_ERR_E		56
+#define HEART_L4_INT_XWID_ERR_F		57
+#define HEART_L4_INT_XWID_ERR_XBOW	58
+#define HEART_L4_INT_CPU_BUS_ERR_0	59
+#define HEART_L4_INT_CPU_BUS_ERR_1	60
+#define HEART_L4_INT_CPU_BUS_ERR_2	61
+#define HEART_L4_INT_CPU_BUS_ERR_3	62
+#define HEART_L4_INT_HEART_EXCP		63
+
+/*
+ * Power Switch is wired via BaseIO BRIDGE slot #6.
+ *
+ * ACFail is wired via BaseIO BRIDGE slot #7.
+ */
+#define IP30_POWER_IRQ		HEART_L2_INT_POWER_BTN
+
+#include_next <irq.h>
+
+#define IP30_HEART_L0_IRQ	(MIPS_CPU_IRQ_BASE + 2)
+#define IP30_HEART_L1_IRQ	(MIPS_CPU_IRQ_BASE + 3)
+#define IP30_HEART_L2_IRQ	(MIPS_CPU_IRQ_BASE + 4)
+#define IP30_HEART_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 5)
+#define IP30_HEART_ERR_IRQ	(MIPS_CPU_IRQ_BASE + 6)
+
+#endif /* __ASM_MACH_IP30_IRQ_H */

arch/mips/include/asm/mach-ip30/kernel-entry-init.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_MACH_IP30_KERNEL_ENTRY_H
+#define __ASM_MACH_IP30_KERNEL_ENTRY_H
+
+	.macro  kernel_entry_setup
+	.endm
+
+	.macro	smp_slave_setup
+	move	gp, a0
+	.endm
+
+#endif /* __ASM_MACH_IP30_KERNEL_ENTRY_H */

arch/mips/include/asm/mach-ip30/mangle-port.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP30_MANGLE_PORT_H
+#define __ASM_MACH_IP30_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	((port)^3)
+#define __swizzle_addr_w(port)	((port)^2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#define ioswabb(a, x)		(x)
+#define __mem_ioswabb(a, x)	(x)
+#define ioswabw(a, x)		(x)
+#define __mem_ioswabw(a, x)	cpu_to_le16(x)
+#define ioswabl(a, x)		(x)
+#define __mem_ioswabl(a, x)	cpu_to_le32(x)
+#define ioswabq(a, x)		(x)
+#define __mem_ioswabq(a, x)	cpu_to_le64(x)
+
+#endif /* __ASM_MACH_IP30_MANGLE_PORT_H */

arch/mips/include/asm/mach-ip30/spaces.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Joshua Kinard <kumba@gentoo.org>
+ *
+ */
+#ifndef _ASM_MACH_IP30_SPACES_H
+#define _ASM_MACH_IP30_SPACES_H
+
+/*
+ * Memory in IP30/Octane is offset 512MB in the physical address space.
+ */
+#define PHYS_OFFSET	_AC(0x20000000, UL)
+
+#ifdef CONFIG_64BIT
+#define CAC_BASE	_AC(0xA800000000000000, UL)
+#endif
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP30_SPACES_H */

arch/mips/include/asm/mach-ip30/war.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP30_WAR_H
+#define __ASM_MIPS_MACH_IP30_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS34K_MISSED_ITLB_WAR		0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+
+#ifdef CONFIG_CPU_R10000
+#define R10000_LLSC_WAR			1
+#else
+#define R10000_LLSC_WAR			0
+#endif
+
+#endif /* __ASM_MIPS_MACH_IP30_WAR_H */

arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ *	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ *	arch/mips/kernel/proc.c(show_cpuinfo),
+ *	loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LOONGSON2EF_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LOONGSON2EF_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_divec		0
+#define cpu_has_ejtag		0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips16e2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mipsmt		0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_vce		0
+#define cpu_has_veic		0
+#define cpu_has_vint		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+
+#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-loongson64/machine.h → arch/mips/include/asm/mach-loongson2ef/machine.h

@@ -4,8 +4,8 @@
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
-#ifndef __ASM_MACH_LOONGSON64_MACHINE_H
-#define __ASM_MACH_LOONGSON64_MACHINE_H
+#ifndef __ASM_MACH_LOONGSON2EF_MACHINE_H
+#define __ASM_MACH_LOONGSON2EF_MACHINE_H
 
 #ifdef CONFIG_LEMOTE_FULOONG2E
 
@@ -20,10 +20,4 @@
 
 #endif
 
-#ifdef CONFIG_LOONGSON_MACH3X
-
-#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC
-
-#endif /* CONFIG_LOONGSON_MACH3X */
-
-#endif /* __ASM_MACH_LOONGSON64_MACHINE_H */
+#endif /* __ASM_MACH_LOONGSON2EF_MACHINE_H */

arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LOONGSON2EF_MC146818RTC_H
+#define __ASM_MACH_LOONGSON2EF_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LOONGSON2EF_MC146818RTC_H */

arch/mips/include/asm/mach-loongson64/mem.h → arch/mips/include/asm/mach-loongson2ef/mem.h

@@ -4,8 +4,8 @@
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
-#ifndef __ASM_MACH_LOONGSON64_MEM_H
-#define __ASM_MACH_LOONGSON64_MEM_H
+#ifndef __ASM_MACH_LOONGSON2EF_MEM_H
+#define __ASM_MACH_LOONGSON2EF_MEM_H
 
 /*
  * high memory space
@@ -34,4 +34,4 @@
 #define LOONGSON_MMIO_MEM_END	0x80000000
 #endif
 
-#endif /* __ASM_MACH_LOONGSON64_MEM_H */
+#endif /* __ASM_MACH_LOONGSON2EF_MEM_H */

arch/mips/include/asm/mach-loongson2ef/pci.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#ifndef __ASM_MACH_LOONGSON2EF_PCI_H_
+#define __ASM_MACH_LOONGSON2EF_PCI_H_
+
+extern struct pci_ops loongson_pci_ops;
+
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/*
+ * we use address window2 to map cpu address space to pci space
+ * window2: cpu [1G, 2G] -> pci [1G, 2G]
+ * why not use window 0 & 1? because they are used by cpu when booting.
+ * window0: cpu [0, 256M] -> ddr [0, 256M]
+ * window1: cpu [256M, 512M] -> pci [256M, 512M]
+ */
+
+/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
+#define LOONGSON_CPU_MEM_SRC	0x40000000ul		/* 1G */
+#define LOONGSON_PCI_MEM_DST	LOONGSON_CPU_MEM_SRC
+
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCI_MEM_DST
+#define LOONGSON_PCI_MEM_END	(0x80000000ul-1)	/* 2G */
+
+#define MMAP_CPUTOPCI_SIZE	(LOONGSON_PCI_MEM_END - \
+					LOONGSON_PCI_MEM_START + 1)
+
+#else	/* loongson2f/32bit & loongson2e */
+
+/* this pci memory space is mapped by pcimap in pci.c */
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCILO1_BASE
+#define LOONGSON_PCI_MEM_END	(LOONGSON_PCILO1_BASE + 0x04000000 * 2)
+
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#endif	/* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
+#endif /* !__ASM_MACH_LOONGSON2EF_PCI_H_ */

arch/mips/include/asm/mach-loongson2ef/spaces.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_LOONGSON2EF_SPACES_H_
+#define __ASM_MACH_LOONGSON2EF_SPACES_H_
+
+#if defined(CONFIG_64BIT)
+#define CAC_BASE        _AC(0x9800000000000000, UL)
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+#endif

arch/mips/include/asm/mach-loongson32/prom.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#ifndef __ASM_MACH_LOONGSON32_PROM_H
-#define __ASM_MACH_LOONGSON32_PROM_H
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-/* environment arguments from bootloader */
-extern unsigned long memsize, highmemsize;
-
-/* loongson-specific command line, env and memory initialization */
-extern char *prom_getenv(char *name);
-extern void __init prom_init_cmdline(void);
-
-#endif /* __ASM_MACH_LOONGSON32_PROM_H */

arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h

@@ -43,11 +43,8 @@
 #define cpu_has_vint		0
 #define cpu_has_vtag_icache	0
 #define cpu_has_watch		1
-
-#ifdef CONFIG_CPU_LOONGSON3
 #define cpu_has_wsbh		1
 #define cpu_has_ic_fills_f_dc	1
 #define cpu_hwrena_impl_bits	0xc0000000
-#endif
 
 #endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-loongson64/irq.h

@@ -4,8 +4,6 @@
 
 #include <boot_param.h>
 
-#ifdef CONFIG_CPU_LOONGSON3
-
 /* cpu core interrupt numbers */
 #define MIPS_CPU_IRQ_BASE 56
 
@@ -35,8 +33,6 @@
 
 #define LOONGSON_INT_COREx_INTy(x, y)	(1<<(x) | 1<<(y+4))	/* route to int y of core x */
 
-#endif
-
 extern void fixup_irqs(void);
 extern void loongson3_ipi_interrupt(struct pt_regs *regs);
 

arch/mips/include/asm/mach-loongson64/kernel-entry-init.h

@@ -17,7 +17,6 @@
  * Override macros used in arch/mips/kernel/head.S.
  */
 	.macro	kernel_entry_setup
-#ifdef CONFIG_CPU_LOONGSON3
 	.set	push
 	.set	mips64
 	/* Set LPA on LOONGSON3 config3 */
@@ -30,23 +29,29 @@
 	mtc0	t0, CP0_PAGEGRAIN
 	/* Enable STFill Buffer */
 	mfc0	t0, CP0_PRID
+	/* Loongson-3A R4+ */
+	andi	t1, t0, PRID_IMP_MASK
+	li	t2, PRID_IMP_LOONGSON_64G
+	beq     t1, t2, 1f
+	nop
+	/* Loongson-3A R2/R3 */
 	andi	t0, (PRID_IMP_MASK | PRID_REV_MASK)
-	slti	t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0)
-	bnez	t0, 1f
+	slti	t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+	bnez	t0, 2f
+	nop
+1:
 	mfc0	t0, CP0_CONFIG6
 	or	t0, 0x100
 	mtc0	t0, CP0_CONFIG6
-1:
+2:
 	_ehb
 	.set	pop
-#endif
 	.endm
 
 /*
  * Do SMP slave processor setup.
  */
 	.macro	smp_slave_setup
-#ifdef CONFIG_CPU_LOONGSON3
 	.set	push
 	.set	mips64
 	/* Set LPA on LOONGSON3 config3 */
@@ -59,16 +64,23 @@
 	mtc0	t0, CP0_PAGEGRAIN
 	/* Enable STFill Buffer */
 	mfc0	t0, CP0_PRID
+	/* Loongson-3A R4+ */
+	andi	t1, t0, PRID_IMP_MASK
+	li	t2, PRID_IMP_LOONGSON_64G
+	beq     t1, t2, 1f
+	nop
+	/* Loongson-3A R2/R3 */
 	andi	t0, (PRID_IMP_MASK | PRID_REV_MASK)
-	slti	t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0)
-	bnez	t0, 1f
+	slti	t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+	bnez	t0, 2f
+	nop
+1:
 	mfc0	t0, CP0_CONFIG6
 	or	t0, 0x100
 	mtc0	t0, CP0_CONFIG6
-1:
+2:
 	_ehb
 	.set	pop
-#endif
 	.endm
 
 #endif /* __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H */

arch/mips/include/asm/mach-loongson64/loongson.h

@@ -12,8 +12,6 @@
 #include <linux/irq.h>
 #include <boot_param.h>
 
-/* loongson internal northbridge initialization */
-extern void bonito_irq_init(void);
 
 /* machine-specific reboot/halt operation */
 extern void mach_prepare_reboot(void);
@@ -26,25 +24,9 @@ extern const struct plat_smp_ops loongson3_smp_ops;
 
 /* loongson-specific command line, env and memory initialization */
 extern void __init prom_init_memory(void);
-extern void __init prom_init_cmdline(void);
-extern void __init prom_init_machtype(void);
 extern void __init prom_init_env(void);
-#ifdef CONFIG_LOONGSON_UART_BASE
-extern unsigned long _loongson_uart_base[], loongson_uart_base[];
-extern void prom_init_loongson_uart_base(void);
-#endif
-
-static inline void prom_init_uart_base(void)
-{
-#ifdef CONFIG_LOONGSON_UART_BASE
-	prom_init_loongson_uart_base();
-#endif
-}
 
 /* irq operation functions */
-extern void bonito_irqdispatch(void);
-extern void __init bonito_irq_init(void);
-extern void __init mach_init_irq(void);
 extern void mach_irq_dispatch(unsigned int pending);
 extern int mach_i8259_irq(void);
 
@@ -64,17 +46,6 @@ extern int mach_i8259_irq(void);
 #define LOONGSON3_REG32(base, x) \
 	(*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
 
-#define LOONGSON_IRQ_BASE	32
-#define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
-
-#include <linux/interrupt.h>
-static inline void do_perfcnt_IRQ(void)
-{
-#if IS_ENABLED(CONFIG_OPROFILE)
-	do_IRQ(LOONGSON2_PERFCNT_IRQ);
-#endif
-}
-
 #define LOONGSON_FLASH_BASE	0x1c000000
 #define LOONGSON_FLASH_SIZE	0x02000000	/* 32M */
 #define LOONGSON_FLASH_TOP	(LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
@@ -109,11 +80,7 @@ static inline void do_perfcnt_IRQ(void)
 #define LOONGSON_PCICFG_SIZE	0x00000800	/* 2K */
 #define LOONGSON_PCICFG_TOP	(LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
 
-#ifdef CONFIG_CPU_LOONGSON3
 #define LOONGSON_PCIIO_BASE	loongson_sysconf.pci_io_base
-#else
-#define LOONGSON_PCIIO_BASE	0x1fd00000
-#endif
 
 #define LOONGSON_PCIIO_SIZE	0x00100000	/* 1M */
 #define LOONGSON_PCIIO_TOP	(LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
@@ -270,86 +237,4 @@ extern u64 loongson_freqctrl[MAX_PACKAGES];
 #define LOONGSON_PCIMAP_WIN(WIN, ADDR)	\
 	((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
 
-#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
-#include <linux/cpufreq.h>
-extern struct cpufreq_frequency_table loongson2_clockmod_table[];
-#endif
-
-/*
- * address windows configuration module
- *
- * loongson2e do not have this module
- */
-#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
-
-/* address window config module base address */
-#define LOONGSON_ADDRWINCFG_BASE		0x3ff00000ul
-#define LOONGSON_ADDRWINCFG_SIZE		0x180
-
-extern unsigned long _loongson_addrwincfg_base;
-#define LOONGSON_ADDRWINCFG(offset) \
-	(*(volatile u64 *)(_loongson_addrwincfg_base + (offset)))
-
-#define CPU_WIN0_BASE	LOONGSON_ADDRWINCFG(0x00)
-#define CPU_WIN1_BASE	LOONGSON_ADDRWINCFG(0x08)
-#define CPU_WIN2_BASE	LOONGSON_ADDRWINCFG(0x10)
-#define CPU_WIN3_BASE	LOONGSON_ADDRWINCFG(0x18)
-
-#define CPU_WIN0_MASK	LOONGSON_ADDRWINCFG(0x20)
-#define CPU_WIN1_MASK	LOONGSON_ADDRWINCFG(0x28)
-#define CPU_WIN2_MASK	LOONGSON_ADDRWINCFG(0x30)
-#define CPU_WIN3_MASK	LOONGSON_ADDRWINCFG(0x38)
-
-#define CPU_WIN0_MMAP	LOONGSON_ADDRWINCFG(0x40)
-#define CPU_WIN1_MMAP	LOONGSON_ADDRWINCFG(0x48)
-#define CPU_WIN2_MMAP	LOONGSON_ADDRWINCFG(0x50)
-#define CPU_WIN3_MMAP	LOONGSON_ADDRWINCFG(0x58)
-
-#define PCIDMA_WIN0_BASE	LOONGSON_ADDRWINCFG(0x60)
-#define PCIDMA_WIN1_BASE	LOONGSON_ADDRWINCFG(0x68)
-#define PCIDMA_WIN2_BASE	LOONGSON_ADDRWINCFG(0x70)
-#define PCIDMA_WIN3_BASE	LOONGSON_ADDRWINCFG(0x78)
-
-#define PCIDMA_WIN0_MASK	LOONGSON_ADDRWINCFG(0x80)
-#define PCIDMA_WIN1_MASK	LOONGSON_ADDRWINCFG(0x88)
-#define PCIDMA_WIN2_MASK	LOONGSON_ADDRWINCFG(0x90)
-#define PCIDMA_WIN3_MASK	LOONGSON_ADDRWINCFG(0x98)
-
-#define PCIDMA_WIN0_MMAP	LOONGSON_ADDRWINCFG(0xa0)
-#define PCIDMA_WIN1_MMAP	LOONGSON_ADDRWINCFG(0xa8)
-#define PCIDMA_WIN2_MMAP	LOONGSON_ADDRWINCFG(0xb0)
-#define PCIDMA_WIN3_MMAP	LOONGSON_ADDRWINCFG(0xb8)
-
-#define ADDRWIN_WIN0	0
-#define ADDRWIN_WIN1	1
-#define ADDRWIN_WIN2	2
-#define ADDRWIN_WIN3	3
-
-#define ADDRWIN_MAP_DST_DDR	0
-#define ADDRWIN_MAP_DST_PCI	1
-#define ADDRWIN_MAP_DST_LIO	1
-
-/*
- * s: CPU, PCIDMA
- * d: DDR, PCI, LIO
- * win: 0, 1, 2, 3
- * src: map source
- * dst: map destination
- * size: ~mask + 1
- */
-#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
-	s##_WIN##w##_BASE = (src); \
-	s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
-	s##_WIN##w##_MASK = ~(size-1); \
-} while (0)
-
-#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
-	LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
-#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
-	LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
-#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
-	LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
-
-#endif	/* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */
-
 #endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */

arch/mips/include/asm/mach-loongson64/loongson_regs.h

+/*
+ * Read/Write Loongson Extension Registers
+ */
+
+#ifndef _LOONGSON_REGS_H_
+#define _LOONGSON_REGS_H_
+
+#include <linux/types.h>
+#include <linux/bits.h>
+
+#include <asm/mipsregs.h>
+#include <asm/cpu.h>
+
+static inline bool cpu_has_cfg(void)
+{
+	return ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G);
+}
+
+static inline u32 read_cpucfg(u32 reg)
+{
+	u32 __res;
+
+	__asm__ __volatile__(
+		"parse_r __res,%0\n\t"
+		"parse_r reg,%1\n\t"
+		".insn \n\t"
+		".word (0xc8080118 | (reg << 21) | (__res << 11))\n\t"
+		:"=r"(__res)
+		:"r"(reg)
+		:
+		);
+	return __res;
+}
+
+/* Bit Domains for CFG registers */
+#define LOONGSON_CFG0	0x0
+#define LOONGSON_CFG0_PRID GENMASK(31, 0)
+
+#define LOONGSON_CFG1 0x1
+#define LOONGSON_CFG1_FP	BIT(0)
+#define LOONGSON_CFG1_FPREV	GENMASK(3, 1)
+#define LOONGSON_CFG1_MMI	BIT(4)
+#define LOONGSON_CFG1_MSA1	BIT(5)
+#define LOONGSON_CFG1_MSA2	BIT(6)
+#define LOONGSON_CFG1_CGP	BIT(7)
+#define LOONGSON_CFG1_WRP	BIT(8)
+#define LOONGSON_CFG1_LSX1	BIT(9)
+#define LOONGSON_CFG1_LSX2	BIT(10)
+#define LOONGSON_CFG1_LASX	BIT(11)
+#define LOONGSON_CFG1_R6FXP	BIT(12)
+#define LOONGSON_CFG1_R6CRCP	BIT(13)
+#define LOONGSON_CFG1_R6FPP	BIT(14)
+#define LOONGSON_CFG1_CNT64	BIT(15)
+#define LOONGSON_CFG1_LSLDR0	BIT(16)
+#define LOONGSON_CFG1_LSPREF	BIT(17)
+#define LOONGSON_CFG1_LSPREFX	BIT(18)
+#define LOONGSON_CFG1_LSSYNCI	BIT(19)
+#define LOONGSON_CFG1_LSUCA	BIT(20)
+#define LOONGSON_CFG1_LLSYNC	BIT(21)
+#define LOONGSON_CFG1_TGTSYNC	BIT(22)
+#define LOONGSON_CFG1_LLEXC	BIT(23)
+#define LOONGSON_CFG1_SCRAND	BIT(24)
+#define LOONGSON_CFG1_MUALP	BIT(25)
+#define LOONGSON_CFG1_KMUALEN	BIT(26)
+#define LOONGSON_CFG1_ITLBT	BIT(27)
+#define LOONGSON_CFG1_LSUPERF	BIT(28)
+#define LOONGSON_CFG1_SFBP	BIT(29)
+#define LOONGSON_CFG1_CDMAP	BIT(30)
+
+#define LOONGSON_CFG2 0x2
+#define LOONGSON_CFG2_LEXT1	BIT(0)
+#define LOONGSON_CFG2_LEXT2	BIT(1)
+#define LOONGSON_CFG2_LEXT3	BIT(2)
+#define LOONGSON_CFG2_LSPW	BIT(3)
+#define LOONGSON_CFG2_LBT1	BIT(4)
+#define LOONGSON_CFG2_LBT2	BIT(5)
+#define LOONGSON_CFG2_LBT3	BIT(6)
+#define LOONGSON_CFG2_LBTMMU	BIT(7)
+#define LOONGSON_CFG2_LPMP	BIT(8)
+#define LOONGSON_CFG2_LPMPREV	GENMASK(11, 9)
+#define LOONGSON_CFG2_LAMO	BIT(12)
+#define LOONGSON_CFG2_LPIXU	BIT(13)
+#define LOONGSON_CFG2_LPIXUN	BIT(14)
+#define LOONGSON_CFG2_LZVP	BIT(15)
+#define LOONGSON_CFG2_LZVREV	GENMASK(18, 16)
+#define LOONGSON_CFG2_LGFTP	BIT(19)
+#define LOONGSON_CFG2_LGFTPREV	GENMASK(22, 20)
+#define LOONGSON_CFG2_LLFTP	BIT(23)
+#define LOONGSON_CFG2_LLFTPREV	GENMASK(26, 24)
+#define LOONGSON_CFG2_LCSRP	BIT(27)
+#define LOONGSON_CFG2_LDISBLIKELY	BIT(28)
+
+#define LOONGSON_CFG3 0x3
+#define LOONGSON_CFG3_LCAMP	BIT(0)
+#define LOONGSON_CFG3_LCAMREV	GENMASK(3, 1)
+#define LOONGSON_CFG3_LCAMNUM	GENMASK(11, 4)
+#define LOONGSON_CFG3_LCAMKW	GENMASK(19, 12)
+#define LOONGSON_CFG3_LCAMVW	GENMASK(27, 20)
+
+#define LOONGSON_CFG4 0x4
+#define LOONGSON_CFG4_CCFREQ	GENMASK(31, 0)
+
+#define LOONGSON_CFG5 0x5
+#define LOONGSON_CFG5_CFM	GENMASK(15, 0)
+#define LOONGSON_CFG5_CFD	GENMASK(31, 16)
+
+#define LOONGSON_CFG6 0x6
+
+#define LOONGSON_CFG7 0x7
+#define LOONGSON_CFG7_GCCAEQRP	BIT(0)
+#define LOONGSON_CFG7_UCAWINP	BIT(1)
+
+static inline bool cpu_has_csr(void)
+{
+	if (cpu_has_cfg())
+		return (read_cpucfg(LOONGSON_CFG2) & LOONGSON_CFG2_LCSRP);
+
+	return false;
+}
+
+static inline u32 csr_readl(u32 reg)
+{
+	u32 __res;
+
+	/* RDCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r __res,%0\n\t"
+		"parse_r reg,%1\n\t"
+		".insn \n\t"
+		".word (0xc8000118 | (reg << 21) | (__res << 11))\n\t"
+		:"=r"(__res)
+		:"r"(reg)
+		:
+		);
+	return __res;
+}
+
+static inline u64 csr_readq(u32 reg)
+{
+	u64 __res;
+
+	/* DWRCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r __res,%0\n\t"
+		"parse_r reg,%1\n\t"
+		".insn \n\t"
+		".word (0xc8020118 | (reg << 21) | (__res << 11))\n\t"
+		:"=r"(__res)
+		:"r"(reg)
+		:
+		);
+	return __res;
+}
+
+static inline void csr_writel(u32 val, u32 reg)
+{
+	/* WRCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r reg,%0\n\t"
+		"parse_r val,%1\n\t"
+		".insn \n\t"
+		".word (0xc8010118 | (reg << 21) | (val << 11))\n\t"
+		:
+		:"r"(reg),"r"(val)
+		:
+		);
+}
+
+static inline void csr_writeq(u64 val, u32 reg)
+{
+	/* DWRCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r reg,%0\n\t"
+		"parse_r val,%1\n\t"
+		".insn \n\t"
+		".word (0xc8030118 | (reg << 21) | (val << 11))\n\t"
+		:
+		:"r"(reg),"r"(val)
+		:
+		);
+}
+
+/* Public CSR Register can also be accessed with regular addresses */
+#define CSR_PUBLIC_MMIO_BASE 0x1fe00000
+
+#define MMIO_CSR(x)		(void *)TO_UNCAC(CSR_PUBLIC_MMIO_BASE + x)
+
+#define LOONGSON_CSR_FEATURES	0x8
+#define LOONGSON_CSRF_TEMP	BIT(0)
+#define LOONGSON_CSRF_NODECNT	BIT(1)
+#define LOONGSON_CSRF_MSI	BIT(2)
+#define LOONGSON_CSRF_EXTIOI	BIT(3)
+#define LOONGSON_CSRF_IPI	BIT(4)
+#define LOONGSON_CSRF_FREQ	BIT(5)
+
+#define LOONGSON_CSR_VENDOR	0x10 /* Vendor name string, should be "Loongson" */
+#define LOONGSON_CSR_CPUNAME	0x20 /* Processor name string */
+#define LOONGSON_CSR_NODECNT	0x408
+#define LOONGSON_CSR_CPUTEMP	0x428
+
+/* PerCore CSR, only accessable by local cores */
+#define LOONGSON_CSR_IPI_STATUS	0x1000
+#define LOONGSON_CSR_IPI_EN	0x1004
+#define LOONGSON_CSR_IPI_SET	0x1008
+#define LOONGSON_CSR_IPI_CLEAR	0x100c
+#define LOONGSON_CSR_IPI_SEND	0x1040
+#define CSR_IPI_SEND_IP_SHIFT	0
+#define CSR_IPI_SEND_CPU_SHIFT	16
+#define CSR_IPI_SEND_BLOCK	BIT(31)
+
+static inline u64 drdtime(void)
+{
+	int rID = 0;
+	u64 val = 0;
+
+	__asm__ __volatile__(
+		"parse_r rID,%0\n\t"
+		"parse_r val,%1\n\t"
+		".insn \n\t"
+		".word (0xc8090118 | (rID << 21) | (val << 11))\n\t"
+		:"=r"(rID),"=r"(val)
+		:
+		);
+	return val;
+}
+
+#endif

arch/mips/include/asm/mach-loongson64/mmzone.h

@@ -6,8 +6,8 @@
  *          Huacai Chen, chenhc@lemote.com
  *          Xiaofu Meng, Shuangshuang Zhang
  */
-#ifndef _ASM_MACH_MMZONE_H
-#define _ASM_MACH_MMZONE_H
+#ifndef _ASM_MACH_LOONGSON64_MMZONE_H
+#define _ASM_MACH_LOONGSON64_MMZONE_H
 
 #include <boot_param.h>
 #define NODE_ADDRSPACE_SHIFT 44
@@ -19,30 +19,9 @@
 #define pa_to_nid(addr)  (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
 #define nid_to_addrbase(nid) ((nid) << NODE_ADDRSPACE_SHIFT)
 
-#define LEVELS_PER_SLICE 128
+extern struct pglist_data *__node_data[];
 
-struct slice_data {
-	unsigned long irq_enable_mask[2];
-	int level_to_irq[LEVELS_PER_SLICE];
-};
-
-struct hub_data {
-	cpumask_t	h_cpus;
-	unsigned long slice_map;
-	unsigned long irq_alloc_mask[2];
-	struct slice_data slice[2];
-};
-
-struct node_data {
-	struct pglist_data pglist;
-	struct hub_data hub;
-	cpumask_t cpumask;
-};
-
-extern struct node_data *__node_data[];
-
-#define NODE_DATA(n)		(&__node_data[(n)]->pglist)
-#define hub_data(n)		(&__node_data[(n)]->hub)
+#define NODE_DATA(n)		(__node_data[n])
 
 extern void setup_zero_pages(void);
 extern void __init prom_init_numa_memory(void);

arch/mips/include/asm/mach-loongson64/pci.h

@@ -12,39 +12,8 @@ extern struct pci_ops loongson_pci_ops;
 /* this is an offset from mips_io_port_base */
 #define LOONGSON_PCI_IO_START	0x00004000UL
 
-#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
-
-/*
- * we use address window2 to map cpu address space to pci space
- * window2: cpu [1G, 2G] -> pci [1G, 2G]
- * why not use window 0 & 1? because they are used by cpu when booting.
- * window0: cpu [0, 256M] -> ddr [0, 256M]
- * window1: cpu [256M, 512M] -> pci [256M, 512M]
- */
-
-/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
-#define LOONGSON_CPU_MEM_SRC	0x40000000ul		/* 1G */
-#define LOONGSON_PCI_MEM_DST	LOONGSON_CPU_MEM_SRC
-
-#define LOONGSON_PCI_MEM_START	LOONGSON_PCI_MEM_DST
-#define LOONGSON_PCI_MEM_END	(0x80000000ul-1)	/* 2G */
-
-#define MMAP_CPUTOPCI_SIZE	(LOONGSON_PCI_MEM_END - \
-					LOONGSON_PCI_MEM_START + 1)
-
-#else	/* loongson2f/32bit & loongson2e */
-
-/* this pci memory space is mapped by pcimap in pci.c */
-#ifdef CONFIG_CPU_LOONGSON3
 #define LOONGSON_PCI_MEM_START	0x40000000UL
 #define LOONGSON_PCI_MEM_END	0x7effffffUL
-#else
-#define LOONGSON_PCI_MEM_START	LOONGSON_PCILO1_BASE
-#define LOONGSON_PCI_MEM_END	(LOONGSON_PCILO1_BASE + 0x04000000 * 2)
-#endif
-/* this is an offset from mips_io_port_base */
-#define LOONGSON_PCI_IO_START	0x00004000UL
 
-#endif	/* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
 
 #endif /* !__ASM_MACH_LOONGSON64_PCI_H_ */

arch/mips/include/asm/mach-loongson64/topology.h

@@ -5,7 +5,9 @@
 #ifdef CONFIG_NUMA
 
 #define cpu_to_node(cpu)	(cpu_logical_map(cpu) >> 2)
-#define cpumask_of_node(node)	(&__node_data[(node)]->cpumask)
+
+extern cpumask_t __node_cpumask[];
+#define cpumask_of_node(node)	(&__node_cpumask[node])
 
 struct pci_bus;
 extern int pcibus_to_node(struct pci_bus *);

arch/mips/include/asm/mipsregs.h

@@ -689,6 +689,9 @@
 #define MIPS_CONF7_IAR		(_ULCAST_(1) << 10)
 #define MIPS_CONF7_AR		(_ULCAST_(1) << 16)
 
+/* Ingenic HPTLB off bits */
+#define XBURST_PAGECTRL_HPTLB_DIS 0xa9000000
+
 /* Ingenic Config7 bits */
 #define MIPS_CONF7_BTB_LOOP_EN	(_ULCAST_(1) << 4)
 
@@ -1971,6 +1974,9 @@ do {									\
 #define read_c0_brcm_sleepcount()	__read_32bit_c0_register($22, 7)
 #define write_c0_brcm_sleepcount(val)	__write_32bit_c0_register($22, 7, val)
 
+/* Ingenic page ctrl register */
+#define write_c0_page_ctrl(val)	__write_32bit_c0_register($5, 4, val)
+
 /*
  * Macros to access the guest system control coprocessor
  */

arch/mips/include/asm/module.h

@@ -119,12 +119,12 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "RM7000 "
 #elif defined CONFIG_CPU_SB1
 #define MODULE_PROC_FAMILY "SB1 "
-#elif defined CONFIG_CPU_LOONGSON1
-#define MODULE_PROC_FAMILY "LOONGSON1 "
-#elif defined CONFIG_CPU_LOONGSON2
-#define MODULE_PROC_FAMILY "LOONGSON2 "
-#elif defined CONFIG_CPU_LOONGSON3
-#define MODULE_PROC_FAMILY "LOONGSON3 "
+#elif defined CONFIG_CPU_LOONGSON32
+#define MODULE_PROC_FAMILY "LOONGSON32 "
+#elif defined CONFIG_CPU_LOONGSON2EF
+#define MODULE_PROC_FAMILY "LOONGSON2EF "
+#elif defined CONFIG_CPU_LOONGSON64
+#define MODULE_PROC_FAMILY "LOONGSON64 "
 #elif defined CONFIG_CPU_CAVIUM_OCTEON
 #define MODULE_PROC_FAMILY "OCTEON "
 #elif defined CONFIG_CPU_XLR

arch/mips/include/asm/pci/bridge.h

@@ -807,6 +807,7 @@ struct bridge_controller {
 	unsigned long		intr_addr;
 	struct irq_domain	*domain;
 	unsigned int		pci_int[8];
+	u32			ioc3_sid[8];
 	nasid_t			nasid;
 };
 

arch/mips/include/asm/pgalloc.h

@@ -96,9 +96,9 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 	free_pages((unsigned long)pud, PUD_ORDER);
 }
 
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4d, pud_t *pud)
 {
-	set_pgd(pgd, __pgd((unsigned long)pud));
+	set_p4d(p4d, __p4d((unsigned long)pud));
 }
 
 #define __pud_free_tlb(tlb, x, addr)	pud_free((tlb)->mm, x)

arch/mips/include/asm/pgtable-32.h

@@ -16,7 +16,6 @@
 #include <asm/cachectl.h>
 #include <asm/fixmap.h>
 
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 #ifdef CONFIG_HIGHMEM
@@ -196,14 +195,11 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
 
-#define __pgd_offset(address)	pgd_index(address)
-#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
-#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
-
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
 #define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pud_index(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
 #define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
 
 /* to find an entry in a page-table-directory */

arch/mips/include/asm/pgtable.h

@@ -643,17 +643,6 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 
 #include <asm-generic/pgtable.h>
 
-/*
- * uncached accelerated TLB map for video memory access
- */
-#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-struct file;
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-		unsigned long size, pgprot_t vma_prot);
-#endif
-
 /*
  * We provide our own get_unmapped area to cope with the virtual aliasing
  * constraints placed on us by the cache architecture.

arch/mips/include/asm/processor.h

@@ -385,7 +385,7 @@ unsigned long get_wchan(struct task_struct *p);
 #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
 #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
 
-#ifdef CONFIG_CPU_LOONGSON3
+#ifdef CONFIG_CPU_LOONGSON64
 /*
  * Loongson-3's SFB (Store-Fill-Buffer) may buffer writes indefinitely when a
  * tight read loop is executed, because reads take priority over writes & the

arch/mips/include/asm/sn/agent.h

@@ -26,7 +26,7 @@
 
 #if defined(CONFIG_SGI_IP27)
 #define HUB_NIC_ADDR(_cpuid)						   \
-	REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)),	    \
+	REMOTE_HUB_ADDR(cpu_to_node(_cpuid),				   \
 		MD_MLAN_CTL)
 #endif
 

arch/mips/include/asm/sn/gda.h

@@ -60,9 +60,7 @@ typedef struct gda {
 				/* Pointer to a mask of nodes with copies
 				 * of the kernel. */
 	char	g_padding[56];	/* pad out to 128 bytes */
-	nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node,
-						  * indexed by cnodeid.
-						  */
+	nasid_t g_nasidtable[MAX_NUMNODES]; /* NASID of each node */
 } gda_t;
 
 #define GDA ((gda_t*) GDA_ADDR(get_nasid()))