net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag

This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h
along with dev_flags definitions for use by the driver.

I then added a flag that changes the PHY init code to setup the LEDs
config to the values needed to operate a dns323 rev C1 NAS.

I moved the existing "resistance" flag to the .h as well, though I've
been unable to find whoever sets this to convert it to use that constant.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>

drivers/net/phy/marvell.c

@@ -29,6 +29,7 @@
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>
+#include <linux/marvell_phy.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -48,8 +49,6 @@
 #define MII_M1145_RGMII_RX_DELAY	0x0080
 #define MII_M1145_RGMII_TX_DELAY	0x0002
 
-#define M1145_DEV_FLAGS_RESISTANCE	0x00000001
-
 #define MII_M1111_PHY_LED_CONTROL	0x18
 #define MII_M1111_PHY_LED_DIRECT	0x4100
 #define MII_M1111_PHY_LED_COMBINE	0x411c
@@ -350,6 +349,9 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Adjust LED Control */
+	if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+		err = phy_write(phydev, 0x10, 0x1100);
+	else
 		err = phy_write(phydev, 0x10, 0x021e);
 	if (err < 0)
 		return err;
@@ -398,7 +400,7 @@ static int m88e1145_config_init(struct phy_device *phydev)
 		if (err < 0)
 			return err;
 
-		if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
+		if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
 			err = phy_write(phydev, 0x1d, 0x0012);
 			if (err < 0)
 				return err;
@@ -529,8 +531,8 @@ static int m88e1121_did_interrupt(struct phy_device *phydev)
 
 static struct phy_driver marvell_drivers[] = {
 	{
-		.phy_id = 0x01410c60,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1101,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -541,8 +543,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410c90,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1112,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1112",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -554,8 +556,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410cc0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1111,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1111",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -567,8 +569,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410e10,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1118,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1118",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -580,8 +582,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = {.owner = THIS_MODULE,},
 	},
 	{
-		.phy_id = 0x01410cb0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1121R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1121R",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -593,8 +595,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410cd0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1145,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1145",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -606,8 +608,8 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410e30,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1240,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,

include/linux/marvell_phy.h

+#ifndef _MARVELL_PHY_H
+#define _MARVELL_PHY_H
+
+/* Mask used for ID comparisons */
+#define MARVELL_PHY_ID_MASK		0xfffffff0
+
+/* Known PHY IDs */
+#define MARVELL_PHY_ID_88E1101		0x01410c60
+#define MARVELL_PHY_ID_88E1112		0x01410c90
+#define MARVELL_PHY_ID_88E1111		0x01410cc0
+#define MARVELL_PHY_ID_88E1118		0x01410e10
+#define MARVELL_PHY_ID_88E1121R		0x01410cb0
+#define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1240		0x01410e30
+
+/* struct phy_device dev_flags definitions */
+#define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001
+#define MARVELL_PHY_M1118_DNS323_LEDS		0x00000002
+
+#endif /* _MARVELL_PHY_H */