drbd: Consider the disk-timeout also for meta-data IO operations

If the backing device is already frozen during attach, we failed
to recognize that. The current disk-timeout code works on top
of the drbd_request objects. During attach we do not allow IO
and therefore never generate a drbd_request object but block
before that in drbd_make_request().

This patch adds the timeout to all drbd_md_sync_page_io().

Before this patch we used to go from D_ATTACHING directly
to D_DISKLESS if IO failed during attach. We can no longer
do this since we have to stay in D_FAILED until all IO
ops issued to the backing device returned.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drivers/block/drbd/drbd_actlog.c

@@ -129,9 +129,21 @@ static bool md_io_allowed(struct drbd_conf *mdev)
 	return ds >= D_NEGOTIATING || ds == D_ATTACHING;
 }
 
-void wait_until_done_or_disk_failure(struct drbd_conf *mdev, unsigned int *done)
+void wait_until_done_or_disk_failure(struct drbd_conf *mdev, struct drbd_backing_dev *bdev,
+				     unsigned int *done)
 {
-	wait_event(mdev->misc_wait, *done || !md_io_allowed(mdev));
+	long dt;
+
+	rcu_read_lock();
+	dt = rcu_dereference(bdev->disk_conf)->disk_timeout;
+	rcu_read_unlock();
+	dt = dt * HZ / 10;
+	if (dt == 0)
+		dt = MAX_SCHEDULE_TIMEOUT;
+
+	dt = wait_event_timeout(mdev->misc_wait, *done || !md_io_allowed(mdev), dt);
+	if (dt == 0)
+		dev_err(DEV, "meta-data IO operation timed out\n");
 }
 
 static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
@@ -171,7 +183,7 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
 		bio_endio(bio, -EIO);
 	else
 		submit_bio(rw, bio);
-	wait_until_done_or_disk_failure(mdev, &mdev->md_io.done);
+	wait_until_done_or_disk_failure(mdev, bdev, &mdev->md_io.done);
 	if (bio_flagged(bio, BIO_UPTODATE))
 		err = mdev->md_io.error;
 

drivers/block/drbd/drbd_bitmap.c

@@ -1123,7 +1123,7 @@ static int bm_rw(struct drbd_conf *mdev, int rw, unsigned flags, unsigned lazy_w
 	 * "in_flight reached zero, all done" event.
 	 */
 	if (!atomic_dec_and_test(&ctx->in_flight))
-		wait_until_done_or_disk_failure(mdev, &ctx->done);
+		wait_until_done_or_disk_failure(mdev, mdev->ldev, &ctx->done);
 	else
 		kref_put(&ctx->kref, &bm_aio_ctx_destroy);
 
@@ -1242,7 +1242,7 @@ int drbd_bm_write_page(struct drbd_conf *mdev, unsigned int idx) __must_hold(loc
 	}
 
 	bm_page_io_async(ctx, idx, WRITE_SYNC);
-	wait_until_done_or_disk_failure(mdev, &ctx->done);
+	wait_until_done_or_disk_failure(mdev, mdev->ldev, &ctx->done);
 
 	if (ctx->error)
 		drbd_chk_io_error(mdev, 1, true);

drivers/block/drbd/drbd_int.h

@@ -1428,7 +1428,8 @@ extern void drbd_md_put_buffer(struct drbd_conf *mdev);
 extern int drbd_md_sync_page_io(struct drbd_conf *mdev,
 		struct drbd_backing_dev *bdev, sector_t sector, int rw);
 extern void drbd_ov_out_of_sync_found(struct drbd_conf *, sector_t, int);
-extern void wait_until_done_or_disk_failure(struct drbd_conf *mdev, unsigned int *done);
+extern void wait_until_done_or_disk_failure(struct drbd_conf *mdev, struct drbd_backing_dev *bdev,
+					    unsigned int *done);
 extern void drbd_rs_controller_reset(struct drbd_conf *mdev);
 
 static inline void ov_out_of_sync_print(struct drbd_conf *mdev)

drivers/block/drbd/drbd_state.c

@@ -1308,37 +1308,41 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 	/* first half of local IO error, failure to attach,
 	 * or administrative detach */
 	if (os.disk != D_FAILED && ns.disk == D_FAILED) {
-		enum drbd_io_error_p eh;
-		int was_io_error;
+		enum drbd_io_error_p eh = EP_PASS_ON;
+		int was_io_error = 0;
 		/* corresponding get_ldev was in __drbd_set_state, to serialize
-		 * our cleanup here with the transition to D_DISKLESS,
-		 * so it is safe to dreference ldev here. */
-		rcu_read_lock();
-		eh = rcu_dereference(mdev->ldev->disk_conf)->on_io_error;
-		rcu_read_unlock();
-		was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags);
+		 * our cleanup here with the transition to D_DISKLESS.
+		 * But is is still not save to dreference ldev here, since
+		 * we might come from an failed Attach before ldev was set. */
+		if (mdev->ldev) {
+			rcu_read_lock();
+			eh = rcu_dereference(mdev->ldev->disk_conf)->on_io_error;
+			rcu_read_unlock();
 
-		/* Immediately allow completion of all application IO, that waits
-		   for completion from the local disk. */
-		tl_abort_disk_io(mdev);
+			was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags);
 
-		/* current state still has to be D_FAILED,
-		 * there is only one way out: to D_DISKLESS,
-		 * and that may only happen after our put_ldev below. */
-		if (mdev->state.disk != D_FAILED)
-			dev_err(DEV,
-				"ASSERT FAILED: disk is %s during detach\n",
-				drbd_disk_str(mdev->state.disk));
+			/* Immediately allow completion of all application IO, that waits
+			   for completion from the local disk. */
+			tl_abort_disk_io(mdev);
 
-		if (ns.conn >= C_CONNECTED)
-			drbd_send_state(mdev, ns);
+			/* current state still has to be D_FAILED,
+			 * there is only one way out: to D_DISKLESS,
+			 * and that may only happen after our put_ldev below. */
+			if (mdev->state.disk != D_FAILED)
+				dev_err(DEV,
+					"ASSERT FAILED: disk is %s during detach\n",
+					drbd_disk_str(mdev->state.disk));
 
-		drbd_rs_cancel_all(mdev);
+			if (ns.conn >= C_CONNECTED)
+				drbd_send_state(mdev, ns);
 
-		/* In case we want to get something to stable storage still,
-		 * this may be the last chance.
-		 * Following put_ldev may transition to D_DISKLESS. */
-		drbd_md_sync(mdev);
+			drbd_rs_cancel_all(mdev);
+
+			/* In case we want to get something to stable storage still,
+			 * this may be the last chance.
+			 * Following put_ldev may transition to D_DISKLESS. */
+			drbd_md_sync(mdev);
+		}
 		put_ldev(mdev);
 
 		if (was_io_error && eh == EP_CALL_HELPER)