powerpc/book3e: Add generic 64-bit idle powersave support

We use a similar technique to ppc32: We set a thread local flag
to indicate that we are about to enter or have entered the stop
state, and have fixup code in the async interrupt entry code that
reacts to this flag to make us return to a different location
(sets NIP to LINK in our case).
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
--
v2. Fix lockdep bug
    Re-mask interrupts when coming back from idle
parent 850f22d5
...@@ -278,6 +278,7 @@ extern void e500_idle(void); ...@@ -278,6 +278,7 @@ extern void e500_idle(void);
extern void power4_idle(void); extern void power4_idle(void);
extern void power4_cpu_offline_powersave(void); extern void power4_cpu_offline_powersave(void);
extern void ppc6xx_idle(void); extern void ppc6xx_idle(void);
extern void book3e_idle(void);
/* /*
* ppc_md contains a copy of the machine description structure for the * ppc_md contains a copy of the machine description structure for the
......
...@@ -37,7 +37,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ ...@@ -37,7 +37,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
......
...@@ -204,11 +204,30 @@ exc_##n##_bad_stack: \ ...@@ -204,11 +204,30 @@ exc_##n##_bad_stack: \
lis r,TSR_FIS@h; \ lis r,TSR_FIS@h; \
mtspr SPRN_TSR,r mtspr SPRN_TSR,r
/* Used by asynchronous interrupt that may happen in the idle loop.
*
* This check if the thread was in the idle loop, and if yes, returns
* to the caller rather than the PC. This is to avoid a race if
* interrupts happen before the wait instruction.
*/
#define CHECK_NAPPING() \
clrrdi r11,r1,THREAD_SHIFT; \
ld r10,TI_LOCAL_FLAGS(r11); \
andi. r9,r10,_TLF_NAPPING; \
beq+ 1f; \
ld r8,_LINK(r1); \
rlwinm r7,r10,0,~_TLF_NAPPING; \
std r8,_NIP(r1); \
std r7,TI_LOCAL_FLAGS(r11); \
1:
#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ #define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \
START_EXCEPTION(label); \ START_EXCEPTION(label); \
NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \
EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \
ack(r8); \ ack(r8); \
CHECK_NAPPING(); \
addi r3,r1,STACK_FRAME_OVERHEAD; \ addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \ bl hdlr; \
b .ret_from_except_lite; b .ret_from_except_lite;
...@@ -257,6 +276,7 @@ interrupt_end_book3e: ...@@ -257,6 +276,7 @@ interrupt_end_book3e:
CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) // EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL)
// bl special_reg_save_crit // bl special_reg_save_crit
// CHECK_NAPPING();
// addi r3,r1,STACK_FRAME_OVERHEAD // addi r3,r1,STACK_FRAME_OVERHEAD
// bl .critical_exception // bl .critical_exception
// b ret_from_crit_except // b ret_from_crit_except
...@@ -268,6 +288,7 @@ interrupt_end_book3e: ...@@ -268,6 +288,7 @@ interrupt_end_book3e:
// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) // EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL)
// bl special_reg_save_mc // bl special_reg_save_mc
// addi r3,r1,STACK_FRAME_OVERHEAD // addi r3,r1,STACK_FRAME_OVERHEAD
// CHECK_NAPPING();
// bl .machine_check_exception // bl .machine_check_exception
// b ret_from_mc_except // b ret_from_mc_except
b . b .
...@@ -338,6 +359,7 @@ interrupt_end_book3e: ...@@ -338,6 +359,7 @@ interrupt_end_book3e:
CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) // EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL)
// bl special_reg_save_crit // bl special_reg_save_crit
// CHECK_NAPPING();
// addi r3,r1,STACK_FRAME_OVERHEAD // addi r3,r1,STACK_FRAME_OVERHEAD
// bl .unknown_exception // bl .unknown_exception
// b ret_from_crit_except // b ret_from_crit_except
...@@ -434,6 +456,7 @@ kernel_dbg_exc: ...@@ -434,6 +456,7 @@ kernel_dbg_exc:
CRIT_EXCEPTION_PROLOG(0x2080, PROLOG_ADDITION_NONE) CRIT_EXCEPTION_PROLOG(0x2080, PROLOG_ADDITION_NONE)
// EXCEPTION_COMMON(0x2080, PACA_EXCRIT, INTS_DISABLE_ALL) // EXCEPTION_COMMON(0x2080, PACA_EXCRIT, INTS_DISABLE_ALL)
// bl special_reg_save_crit // bl special_reg_save_crit
// CHECK_NAPPING();
// addi r3,r1,STACK_FRAME_OVERHEAD // addi r3,r1,STACK_FRAME_OVERHEAD
// bl .doorbell_critical_exception // bl .doorbell_critical_exception
// b ret_from_crit_except // b ret_from_crit_except
......
/*
* Copyright 2010 IBM Corp, Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* Generic idle routine for Book3E processors
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <asm/reg.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ppc-opcode.h>
#include <asm/processor.h>
#include <asm/thread_info.h>
/* 64-bit version only for now */
#ifdef CONFIG_PPC64
_GLOBAL(book3e_idle)
/* Save LR for later */
mflr r0
std r0,16(r1)
/* Hard disable interrupts */
wrteei 0
/* Now check if an interrupt came in while we were soft disabled
* since we may otherwise lose it (doorbells etc...). We know
* that since PACAHARDIRQEN will have been cleared in that case.
*/
lbz r3,PACAHARDIRQEN(r13)
cmpwi cr0,r3,0
beqlr
/* Now we are going to mark ourselves as soft and hard enables in
* order to be able to take interrupts while asleep. We inform lockdep
* of that. We don't actually turn interrupts on just yet tho.
*/
#ifdef CONFIG_TRACE_IRQFLAGS
stdu r1,-128(r1)
bl .trace_hardirqs_on
#endif
li r0,1
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
/* Interrupts will make use return to LR, so get something we want
* in there
*/
bl 1f
/* Hard disable interrupts again */
wrteei 0
/* Mark them off again in the PACA as well */
li r0,0
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
/* Tell lockdep about it */
#ifdef CONFIG_TRACE_IRQFLAGS
bl .trace_hardirqs_off
addi r1,r1,128
#endif
ld r0,16(r1)
mtlr r0
blr
1: /* Let's set the _TLF_NAPPING flag so interrupts make us return
* to the right spot
*/
clrrdi r11,r1,THREAD_SHIFT
ld r10,TI_LOCAL_FLAGS(r11)
ori r10,r10,_TLF_NAPPING
std r10,TI_LOCAL_FLAGS(r11)
/* We can now re-enable hard interrupts and go to sleep */
wrteei 1
1: PPC_WAIT(0)
b 1b
#endif /* CONFIG_PPC64 */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment