Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits)
  Use menuconfig objects - hwmon
  hwmon/smsc47b397: Use dynamic sysfs callbacks
  hwmon/smsc47b397: Convert to a platform driver
  hwmon/w83781d: Deprecate W83627HF support
  hwmon/w83781d: Use dynamic sysfs callbacks
  hwmon/w83781d: Be less i2c_client-centric
  hwmon/w83781d: Clean up conversion macros
  hwmon/w83781d: No longer use i2c-isa
  hwmon/ams: Do not print error on systems without apple motion sensor
  hwmon/ams: Fix I2C read retry logic
  hwmon: New AD7416, AD7417 and AD7418 driver
  hwmon/coretemp: Add documentation
  hwmon: New coretemp driver
  i386: Use functions from library in msr driver
  i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu
  hwmon/lm75: Use dynamic sysfs callbacks
  hwmon/lm78: Use dynamic sysfs callbacks
  hwmon/lm78: Be less i2c_client-centric
  hwmon/lm78: No longer use i2c-isa
  hwmon: New max6650 driver
  ...

Documentation/hwmon/coretemp

+Kernel driver coretemp
+======================
+
+Supported chips:
+  * All Intel Core family
+    Prefix: 'coretemp'
+    CPUID: family 0x6, models 0xe, 0xf
+    Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
+               Volume 3A: System Programming Guide
+
+Author: Rudolf Marek
+
+Description
+-----------
+
+This driver permits reading temperature sensor embedded inside Intel Core CPU.
+Temperature is measured in degrees Celsius and measurement resolution is
+1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
+the actual value of temperature register is in fact a delta from TjMax.
+
+Temperature known as TjMax is the maximum junction temperature of processor.
+Intel defines this temperature as 85C or 100C. At this temperature, protection
+mechanism will perform actions to forcibly cool down the processor. Alarm
+may be raised, if the temperature grows enough (more than TjMax) to trigger
+the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
+
+temp1_input	 - Core temperature (in millidegrees Celsius).
+temp1_crit	 - Maximum junction temperature  (in millidegrees Celsius).
+temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
+		   Correct CPU operation is no longer guaranteed.
+temp1_label	 - Contains string "Core X", where X is processor
+		   number.
+
+The TjMax temperature is set to 85 degrees C if undocumented model specific
+register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
+(sometimes) documented in processor datasheet.

Documentation/hwmon/max6650

+Kernel driver max6650
+=====================
+
+Supported chips:
+  * Maxim 6650 / 6651
+    Prefix: 'max6650'
+    Addresses scanned: I2C 0x1b, 0x1f, 0x48, 0x4b
+    Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
+
+Authors:
+    Hans J. Koch <hjk@linutronix.de>
+    John Morris <john.morris@spirentcom.com>
+    Claus Gindhart <claus.gindhart@kontron.com>
+
+Description
+-----------
+
+This driver implements support for the Maxim 6650/6651
+
+The 2 devices are very similar, but the Maxim 6550 has a reduced feature
+set, e.g. only one fan-input, instead of 4 for the 6651.
+
+The driver is not able to distinguish between the 2 devices.
+
+The driver provides the following sensor accesses in sysfs:
+
+fan1_input	ro	fan tachometer speed in RPM
+fan2_input	ro	"
+fan3_input	ro	"
+fan4_input	ro	"
+fan1_target	rw	desired fan speed in RPM (closed loop mode only)
+pwm1_enable	rw	regulator mode, 0=full on, 1=open loop, 2=closed loop
+pwm1		rw	relative speed (0-255), 255=max. speed.
+			Used in open loop mode only.
+fan1_div	rw	sets the speed range the inputs can handle. Legal
+			values are 1, 2, 4, and 8. Use lower values for
+			faster fans.
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the MAX6650/6651 correctly, you can
+simply load your module without parameters. It won't touch the configuration
+registers then. If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+
+voltage_12V: 5=5V fan, 12=12V fan, 0=don't change
+prescaler: Possible values are 1,2,4,8,16, or 0 for don't change
+clock: The clock frequency in Hz of the chip the driver should assume [254000]
+
+Please have a look at the MAX6650/6651 data sheet and make sure that you fully
+understand the meaning of these parameters before you attempt to change them.
+

Documentation/hwmon/smsc47m1

@@ -14,6 +14,10 @@ Supported chips:
         http://www.smsc.com/main/datasheets/47m14x.pdf
         http://www.smsc.com/main/tools/discontinued/47m15x.pdf
         http://www.smsc.com/main/datasheets/47m192.pdf
+  * SMSC LPC47M292
+    Addresses scanned: none, address read from Super I/O config space
+    Prefix: 'smsc47m2'
+    Datasheet: Not public
   * SMSC LPC47M997
     Addresses scanned: none, address read from Super I/O config space
     Prefix: 'smsc47m1'
@@ -32,9 +36,10 @@ Description
 The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
 contain monitoring and PWM control circuitry for two fans.
 
-The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
-in addition to the fan monitoring and control. The hardware monitoring
-block is not supported by the driver.
+The LPC47M15x, LPC47M192 and LPC47M292 chips contain a full 'hardware
+monitoring block' in addition to the fan monitoring and control. The
+hardware monitoring block is not supported by this driver, use the
+smsc47m192 driver for that.
 
 No documentation is available for the 47M997, but it has the same device
 ID as the 47M15x and 47M192 chips and seems to be compatible.

Documentation/hwmon/smsc47m192

@@ -2,12 +2,13 @@ Kernel driver smsc47m192
 ========================
 
 Supported chips:
-  * SMSC LPC47M192 and LPC47M997
+  * SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997
     Prefix: 'smsc47m192'
     Addresses scanned: I2C 0x2c - 0x2d
     Datasheet: The datasheet for LPC47M192 is publicly available from
                http://www.smsc.com/
-               The LPC47M997 is compatible for hardware monitoring.
+               The LPC47M15x, LPC47M292 and LPC47M997 are compatible for
+               hardware monitoring.
 
 Author: Hartmut Rick <linux@rick.claranet.de>
         Special thanks to Jean Delvare for careful checking
@@ -18,7 +19,7 @@ Description
 -----------
 
 This driver implements support for the hardware sensor capabilities
-of the SMSC LPC47M192 and LPC47M997 Super-I/O chips.
+of the SMSC LPC47M192 and compatible Super-I/O chips.
 
 These chips support 3 temperature channels and 8 voltage inputs
 as well as CPU voltage VID input.

Documentation/hwmon/sysfs-interface

@@ -152,6 +152,13 @@ fan[1-*]_div	Fan divisor.
 		Note that this is actually an internal clock divisor, which
 		affects the measurable speed range, not the read value.
 
+fan[1-*]_target
+		Desired fan speed
+		Unit: revolution/min (RPM)
+		RW
+		Only makes sense if the chip supports closed-loop fan speed
+		control based on the measured fan speed.
+
 Also see the Alarms section for status flags associated with fans.
 
 

MAINTAINERS

@@ -1040,6 +1040,12 @@ P:	Simon Arlott
 M:	cxacru@fire.lp0.eu
 S:	Maintained
 
+CORETEMP HARDWARE MONITORING DRIVER
+P:	Rudolf Marek
+M:	r.marek@assembler.cz
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+
 COSA/SRP SYNC SERIAL DRIVER
 P:	Jan "Yenya" Kasprzak
 M:	kas@fi.muni.cz
@@ -2314,6 +2320,12 @@ M:	vandrove@vc.cvut.cz
 L:	linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
+MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
+P:	Hans J. Koch
+M:	hjk@linutronix.de
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+
 MEGARAID SCSI DRIVERS
 P:	Neela Syam Kolli
 M:	Neela.Kolli@engenio.com

arch/i386/kernel/msr.c

@@ -45,104 +45,6 @@
 
 static struct class *msr_class;
 
-static inline int wrmsr_eio(u32 reg, u32 eax, u32 edx)
-{
-	int err;
-
-	err = wrmsr_safe(reg, eax, edx);
-	if (err)
-		err = -EIO;
-	return err;
-}
-
-static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx)
-{
-	int err;
-
-	err = rdmsr_safe(reg, eax, edx);
-	if (err)
-		err = -EIO;
-	return err;
-}
-
-#ifdef CONFIG_SMP
-
-struct msr_command {
-	int err;
-	u32 reg;
-	u32 data[2];
-};
-
-static void msr_smp_wrmsr(void *cmd_block)
-{
-	struct msr_command *cmd = (struct msr_command *)cmd_block;
-
-	cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]);
-}
-
-static void msr_smp_rdmsr(void *cmd_block)
-{
-	struct msr_command *cmd = (struct msr_command *)cmd_block;
-
-	cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]);
-}
-
-static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
-{
-	struct msr_command cmd;
-	int ret;
-
-	preempt_disable();
-	if (cpu == smp_processor_id()) {
-		ret = wrmsr_eio(reg, eax, edx);
-	} else {
-		cmd.reg = reg;
-		cmd.data[0] = eax;
-		cmd.data[1] = edx;
-
-		smp_call_function_single(cpu, msr_smp_wrmsr, &cmd, 1, 1);
-		ret = cmd.err;
-	}
-	preempt_enable();
-	return ret;
-}
-
-static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx)
-{
-	struct msr_command cmd;
-	int ret;
-
-	preempt_disable();
-	if (cpu == smp_processor_id()) {
-		ret = rdmsr_eio(reg, eax, edx);
-	} else {
-		cmd.reg = reg;
-
-		smp_call_function_single(cpu, msr_smp_rdmsr, &cmd, 1, 1);
-
-		*eax = cmd.data[0];
-		*edx = cmd.data[1];
-
-		ret = cmd.err;
-	}
-	preempt_enable();
-	return ret;
-}
-
-#else				/* ! CONFIG_SMP */
-
-static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
-{
-	return wrmsr_eio(reg, eax, edx);
-}
-
-static inline int do_rdmsr(int cpu, u32 reg, u32 *eax, u32 *edx)
-{
-	return rdmsr_eio(reg, eax, edx);
-}
-
-#endif				/* ! CONFIG_SMP */
-
 static loff_t msr_seek(struct file *file, loff_t offset, int orig)
 {
 	loff_t ret = -EINVAL;
@@ -174,9 +76,9 @@ static ssize_t msr_read(struct file *file, char __user * buf,
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
-		err = do_rdmsr(cpu, reg, &data[0], &data[1]);
+		err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
 		if (err)
-			return err;
+			return -EIO;
 		if (copy_to_user(tmp, &data, 8))
 			return -EFAULT;
 		tmp += 2;
@@ -200,9 +102,9 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	for (; count; count -= 8) {
 		if (copy_from_user(&data, tmp, 8))
 			return -EFAULT;
-		err = do_wrmsr(cpu, reg, data[0], data[1]);
+		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
 		if (err)
-			return err;
+			return -EIO;
 		tmp += 2;
 	}
 

arch/i386/lib/msr-on-cpu.c

@@ -6,6 +6,7 @@
 struct msr_info {
 	u32 msr_no;
 	u32 l, h;
+	int err;
 };
 
 static void __rdmsr_on_cpu(void *info)
@@ -15,20 +16,38 @@ static void __rdmsr_on_cpu(void *info)
 	rdmsr(rv->msr_no, rv->l, rv->h);
 }
 
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+static void __rdmsr_safe_on_cpu(void *info)
 {
+	struct msr_info *rv = info;
+
+	rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h);
+}
+
+static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
+{
+	int err = 0;
 	preempt_disable();
 	if (smp_processor_id() == cpu)
+		if (safe)
+			err = rdmsr_safe(msr_no, l, h);
+		else
 			rdmsr(msr_no, *l, *h);
 	else {
 		struct msr_info rv;
 
 		rv.msr_no = msr_no;
+		if (safe) {
+			smp_call_function_single(cpu, __rdmsr_safe_on_cpu,
+						 &rv, 0, 1);
+			err = rv.err;
+		} else {
 			smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 0, 1);
+		}
 		*l = rv.l;
 		*h = rv.h;
 	}
 	preempt_enable();
+	return err;
 }
 
 static void __wrmsr_on_cpu(void *info)
@@ -38,10 +57,21 @@ static void __wrmsr_on_cpu(void *info)
 	wrmsr(rv->msr_no, rv->l, rv->h);
 }
 
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+static void __wrmsr_safe_on_cpu(void *info)
 {
+	struct msr_info *rv = info;
+
+	rv->err = wrmsr_safe(rv->msr_no, rv->l, rv->h);
+}
+
+static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
+{
+	int err = 0;
 	preempt_disable();
 	if (smp_processor_id() == cpu)
+		if (safe)
+			err = wrmsr_safe(msr_no, l, h);
+		else
 			wrmsr(msr_no, l, h);
 	else {
 		struct msr_info rv;
@@ -49,10 +79,41 @@ void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 		rv.msr_no = msr_no;
 		rv.l = l;
 		rv.h = h;
+		if (safe) {
+			smp_call_function_single(cpu, __wrmsr_safe_on_cpu,
+						 &rv, 0, 1);
+			err = rv.err;
+		} else {
 			smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 0, 1);
 		}
+	}
 	preempt_enable();
+	return err;
+}
+
+void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	_wrmsr_on_cpu(cpu, msr_no, l, h, 0);
+}
+
+void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	_rdmsr_on_cpu(cpu, msr_no, l, h, 0);
+}
+
+/* These "safe" variants are slower and should be used when the target MSR
+   may not actually exist. */
+int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	return _wrmsr_on_cpu(cpu, msr_no, l, h, 1);
+}
+
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	return _rdmsr_on_cpu(cpu, msr_no, l, h, 1);
 }
 
 EXPORT_SYMBOL(rdmsr_on_cpu);
 EXPORT_SYMBOL(wrmsr_on_cpu);
+EXPORT_SYMBOL(rdmsr_safe_on_cpu);
+EXPORT_SYMBOL(wrmsr_safe_on_cpu);

drivers/hwmon/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 obj-$(CONFIG_SENSORS_W83791D)	+= w83791d.o
 
 obj-$(CONFIG_SENSORS_ABITUGURU)	+= abituguru.o
+obj-$(CONFIG_SENSORS_AD7418)	+= ad7418.o
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
 obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
+obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
 obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
@@ -44,6 +46,7 @@ obj-$(CONFIG_SENSORS_LM87)	+= lm87.o
 obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
 obj-$(CONFIG_SENSORS_LM92)	+= lm92.o
 obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
+obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o

drivers/hwmon/ams/ams-core.c

@@ -219,9 +219,6 @@ int __init ams_init(void)
 		/* Found PMU motion sensor */
 		return ams_pmu_init(np);
 #endif
-
-	printk(KERN_ERR "ams: No motion sensor found.\n");
-
 	return -ENODEV;
 }
 

drivers/hwmon/ams/ams-i2c.c

@@ -85,17 +85,17 @@ static int ams_i2c_write(u8 reg, u8 value)
 static int ams_i2c_cmd(enum ams_i2c_cmd cmd)
 {
 	s32 result;
-	int remaining = HZ / 20;
+	int count = 3;
 
 	ams_i2c_write(AMS_COMMAND, cmd);
-	mdelay(5);
+	msleep(5);
 
-	while (remaining) {
+	while (count--) {
 		result = ams_i2c_read(AMS_COMMAND);
 		if (result == 0 || result & 0x80)
 			return 0;
 
-		remaining = schedule_timeout(remaining);
+		schedule_timeout_uninterruptible(HZ / 20);
 	}
 
 	return -1;

drivers/hwmon/f71805f.c

@@ -35,6 +35,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
+#include <linux/ioport.h>
 #include <asm/io.h>
 
 static struct platform_device *pdev;
@@ -1140,6 +1141,13 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!request_region(res->start + ADDR_REG_OFFSET, 2, DRVNAME)) {
+		err = -EBUSY;
+		dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n",
+			(unsigned long)(res->start + ADDR_REG_OFFSET),
+			(unsigned long)(res->start + ADDR_REG_OFFSET + 1));
+		goto exit_free;
+	}
 	data->addr = res->start;
 	data->name = names[sio_data->kind];
 	mutex_init(&data->update_lock);
@@ -1165,7 +1173,7 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 
 	/* Register sysfs interface files */
 	if ((err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group)))
-		goto exit_free;
+		goto exit_release_region;
 	if (data->has_in & (1 << 4)) { /* in4 */
 		if ((err = sysfs_create_group(&pdev->dev.kobj,
 					      &f71805f_group_optin[0])))
@@ -1219,6 +1227,8 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 	for (i = 0; i < 4; i++)
 		sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
 	sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
+exit_release_region:
+	release_region(res->start + ADDR_REG_OFFSET, 2);
 exit_free:
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
@@ -1229,6 +1239,7 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 static int __devexit f71805f_remove(struct platform_device *pdev)
 {
 	struct f71805f_data *data = platform_get_drvdata(pdev);
+	struct resource *res;
 	int i;
 
 	platform_set_drvdata(pdev, NULL);
@@ -1239,6 +1250,9 @@ static int __devexit f71805f_remove(struct platform_device *pdev)
 	sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
 	kfree(data);
 
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_region(res->start + ADDR_REG_OFFSET, 2);
+
 	return 0;
 }
 

drivers/hwmon/hwmon-vid.c

@@ -166,16 +166,16 @@ static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_INTEL, 0x6, 0xE, ANY, 14},		/* Intel Core (65 nm) */
 	{X86_VENDOR_INTEL, 0x6, 0xF, ANY, 110},		/* Intel Conroe */
 	{X86_VENDOR_INTEL, 0x6, ANY, ANY, 82},		/* any P6 */
-	{X86_VENDOR_INTEL, 0x7, ANY, ANY, 0},		/* Itanium */
 	{X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90},		/* P4 */
 	{X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90},		/* P4 Willamette */
 	{X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90},		/* P4 Northwood */
 	{X86_VENDOR_INTEL, 0xF, ANY, ANY, 100},		/* Prescott and above assume VRD 10 */
-	{X86_VENDOR_INTEL, 0x10, ANY, ANY, 0},		/* Itanium 2 */
 	{X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85},	/* Eden ESP/Ezra */
 	{X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85},	/* Ezra T */
 	{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85},	/* Nemiah */
-	{X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17},	/* C3-M */
+	{X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17},	/* C3-M, Eden-N */
+	{X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0},		/* No information */
+	{X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13},	/* C7, Esther */
 	{X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0}		/* stop here */
 };
 

drivers/hwmon/lm75.c

@@ -24,6 +24,7 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include "lm75.h"
@@ -39,10 +40,12 @@ I2C_CLIENT_INSMOD_1(lm75);
 /* Many LM75 constants specified below */
 
 /* The LM75 registers */
-#define LM75_REG_TEMP		0x00
 #define LM75_REG_CONF		0x01
-#define LM75_REG_TEMP_HYST	0x02
-#define LM75_REG_TEMP_OS	0x03
+static const u8 LM75_REG_TEMP[3] = {
+	0x00,		/* input */
+	0x03,		/* max */
+	0x02,		/* hyst */
+};
 
 /* Each client has this additional data */
 struct lm75_data {
@@ -51,9 +54,10 @@ struct lm75_data {
 	struct mutex		update_lock;
 	char			valid;		/* !=0 if following fields are valid */
 	unsigned long		last_updated;	/* In jiffies */
-	u16			temp_input;	/* Register values */
-	u16			temp_max;
-	u16			temp_hyst;
+	u16			temp[3];	/* Register values,
+						   0 = input
+						   1 = max
+						   2 = hyst */
 };
 
 static int lm75_attach_adapter(struct i2c_adapter *adapter);
@@ -75,35 +79,36 @@ static struct i2c_driver lm75_driver = {
 	.detach_client	= lm75_detach_client,
 };
 
-#define show(value)	\
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
-{									\
-	struct lm75_data *data = lm75_update_device(dev);		\
-	return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value));	\
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct lm75_data *data = lm75_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       LM75_TEMP_FROM_REG(data->temp[attr->index]));
 }
-show(temp_max);
-show(temp_hyst);
-show(temp_input);
-
-#define set(value, reg)	\
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\
-{								\
-	struct i2c_client *client = to_i2c_client(dev);		\
-	struct lm75_data *data = i2c_get_clientdata(client);	\
-	int temp = simple_strtoul(buf, NULL, 10);		\
-								\
-	mutex_lock(&data->update_lock);				\
-	data->value = LM75_TEMP_TO_REG(temp);			\
-	lm75_write_value(client, reg, data->value);		\
-	mutex_unlock(&data->update_lock);					\
-	return count;						\
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm75_data *data = i2c_get_clientdata(client);
+	int nr = attr->index;
+	unsigned long temp = simple_strtoul(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->temp[nr] = LM75_TEMP_TO_REG(temp);
+	lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
 }
-set(temp_max, LM75_REG_TEMP_OS);
-set(temp_hyst, LM75_REG_TEMP_HYST);
 
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+			show_temp, set_temp, 1);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
+			show_temp, set_temp, 2);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 
 static int lm75_attach_adapter(struct i2c_adapter *adapter)
 {
@@ -113,9 +118,9 @@ static int lm75_attach_adapter(struct i2c_adapter *adapter)
 }
 
 static struct attribute *lm75_attributes[] = {
-	&dev_attr_temp1_input.attr,
-	&dev_attr_temp1_max.attr,
-	&dev_attr_temp1_max_hyst.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
 
 	NULL
 };
@@ -283,11 +288,12 @@ static struct lm75_data *lm75_update_device(struct device *dev)
 
 	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 	    || !data->valid) {
+		int i;
 		dev_dbg(&client->dev, "Starting lm75 update\n");
 
-		data->temp_input = lm75_read_value(client, LM75_REG_TEMP);
-		data->temp_max = lm75_read_value(client, LM75_REG_TEMP_OS);
-		data->temp_hyst = lm75_read_value(client, LM75_REG_TEMP_HYST);
+		for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+			data->temp[i] = lm75_read_value(client,
+							LM75_REG_TEMP[i]);
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}

drivers/hwmon/lm87.c

@@ -747,6 +747,7 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
 	}
 
 	if (!(data->channel & CHAN_NO_VID)) {
+		data->vrm = vid_which_vrm();
 		if ((err = device_create_file(&new_client->dev,
 					&dev_attr_cpu0_vid))
 		 || (err = device_create_file(&new_client->dev,
@@ -779,7 +780,6 @@ static void lm87_init_client(struct i2c_client *client)
 	u8 config;
 
 	data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
-	data->vrm = vid_which_vrm();
 
 	config = lm87_read_value(client, LM87_REG_CONFIG);
 	if (!(config & 0x01)) {

drivers/hwmon/pc87427.c

@@ -31,6 +31,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
+#include <linux/ioport.h>
 #include <asm/io.h>
 
 static struct platform_device *pdev;
@@ -429,6 +430,12 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
 	/* This will need to be revisited when we add support for
 	   temperature and voltage monitoring. */
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) {
+		err = -EBUSY;
+		dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n",
+			(unsigned long)res->start, (unsigned long)res->end);
+		goto exit_kfree;
+	}
 	data->address[0] = res->start;
 
 	mutex_init(&data->lock);
@@ -438,7 +445,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
 
 	/* Register sysfs hooks */
 	if ((err = device_create_file(&pdev->dev, &dev_attr_name)))
-		goto exit_kfree;
+		goto exit_release_region;
 	for (i = 0; i < 8; i++) {
 		if (!(data->fan_enabled & (1 << i)))
 			continue;
@@ -462,6 +469,8 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
 			continue;
 		sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
 	}
+exit_release_region:
+	release_region(res->start, res->end - res->start + 1);
 exit_kfree:
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
@@ -472,6 +481,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
 static int __devexit pc87427_remove(struct platform_device *pdev)
 {
 	struct pc87427_data *data = platform_get_drvdata(pdev);
+	struct resource *res;
 	int i;
 
 	platform_set_drvdata(pdev, NULL);
@@ -484,6 +494,9 @@ static int __devexit pc87427_remove(struct platform_device *pdev)
 	}
 	kfree(data);
 
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_region(res->start, res->end - res->start + 1);
+
 	return 0;
 }
 

drivers/hwmon/smsc47m192.c

 /*
     smsc47m192.c - Support for hardware monitoring block of
-                   SMSC LPC47M192 and LPC47M997 Super I/O chips
+                   SMSC LPC47M192 and compatible Super I/O chips
 
     Copyright (C) 2006  Hartmut Rick <linux@rick.claranet.de>
 
@@ -518,7 +518,7 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
 		 && (i2c_smbus_read_byte_data(client,
 				SMSC47M192_REG_VID4) & 0xfe) == 0x80) {
 			dev_info(&adapter->dev,
-				 "found SMSC47M192 or SMSC47M997, "
+				 "found SMSC47M192 or compatible, "
 				 "version 2, stepping A%d\n", version & 0x0f);
 		} else {
 			dev_dbg(&adapter->dev,

drivers/hwmon/vt1211.c

@@ -31,6 +31,7 @@
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/ioport.h>
 #include <asm/io.h>
 
 static int uch_config = -1;
@@ -1130,6 +1131,12 @@ static int __devinit vt1211_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) {
+		err = -EBUSY;
+		dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+			(unsigned long)res->start, (unsigned long)res->end);
+		goto EXIT_KFREE;
+	}
 	data->addr = res->start;
 	data->name = DRVNAME;
 	mutex_init(&data->update_lock);
@@ -1197,6 +1204,8 @@ static int __devinit vt1211_probe(struct platform_device *pdev)
 	dev_err(dev, "Sysfs interface creation failed (%d)\n", err);
 EXIT_DEV_REMOVE_SILENT:
 	vt1211_remove_sysfs(pdev);
+	release_region(res->start, res->end - res->start + 1);
+EXIT_KFREE:
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 EXIT:
@@ -1206,12 +1215,16 @@ static int __devinit vt1211_probe(struct platform_device *pdev)
 static int __devexit vt1211_remove(struct platform_device *pdev)
 {
 	struct vt1211_data *data = platform_get_drvdata(pdev);
+	struct resource *res;
 
 	hwmon_device_unregister(data->class_dev);
 	vt1211_remove_sysfs(pdev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_region(res->start, res->end - res->start + 1);
+
 	return 0;
 }
 

include/asm-i386/msr.h

@@ -77,7 +77,7 @@ static inline unsigned long long native_read_pmc(void)
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
-
+#include <linux/errno.h>
 /*
  * Access to machine-specific registers (available on 586 and better only)
  * Note: the rd* operations modify the parameters directly (without using
@@ -148,6 +148,8 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val)
 #ifdef CONFIG_SMP
 void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 #else  /*  CONFIG_SMP  */
 static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
@@ -157,6 +159,14 @@ static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	wrmsr(msr_no, l, h);
 }
+static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	return rdmsr_safe(msr_no, l, h);
+}
+static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	return wrmsr_safe(msr_no, l, h);
+}
 #endif  /*  CONFIG_SMP  */
 #endif
 #endif